1Commit Formatting 2~~~~~~~~~~~~~~~~~ 3 4ifdef::git-rev-list[] 5Using these options, linkgit:git-rev-list[1] will act similar to the 6more specialized family of commit log tools: linkgit:git-log[1], 7linkgit:git-show[1], and linkgit:git-whatchanged[1] 8endif::git-rev-list[] 9 10include::pretty-options.txt[] 11 12--relative-date:: 13 14 Synonym for `--date=relative`. 15 16--date={relative,local,default,iso,rfc,short}:: 17 18 Only takes effect for dates shown in human-readable format, such 19 as when using "--pretty". `log.date` config variable sets a default 20 value for log command's --date option. 21+ 22`--date=relative` shows dates relative to the current time, 23e.g. "2 hours ago". 24+ 25`--date=local` shows timestamps in user's local timezone. 26+ 27`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. 28+ 29`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 30format, often found in E-mail messages. 31+ 32`--date=short` shows only date but not time, in `YYYY-MM-DD` format. 33+ 34`--date=default` shows timestamps in the original timezone 35(either committer's or author's). 36 37ifdef::git-rev-list[] 38--header:: 39 40 Print the contents of the commit in raw-format; each record is 41 separated with a NUL character. 42endif::git-rev-list[] 43 44--parents:: 45 46 Print the parents of the commit. 47 48--children:: 49 50 Print the children of the commit. 51 52ifdef::git-rev-list[] 53--timestamp:: 54 Print the raw commit timestamp. 55endif::git-rev-list[] 56 57--left-right:: 58 59 Mark which side of a symmetric diff a commit is reachable from. 60 Commits from the left side are prefixed with `<` and those from 61 the right with `>`. If combined with `--boundary`, those 62 commits are prefixed with `-`. 63+ 64For example, if you have this topology: 65+ 66----------------------------------------------------------------------- 67 y---b---b branch B 68 / \ / 69 / . 70 / / \ 71 o---x---a---a branch A 72----------------------------------------------------------------------- 73+ 74you would get an output line this: 75+ 76----------------------------------------------------------------------- 77 $ git rev-list --left-right --boundary --pretty=oneline A...B 78 79 >bbbbbbb... 3rd on b 80 >bbbbbbb... 2nd on b 81 <aaaaaaa... 3rd on a 82 <aaaaaaa... 2nd on a 83 -yyyyyyy... 1st on b 84 -xxxxxxx... 1st on a 85----------------------------------------------------------------------- 86 87--graph:: 88 89 Draw a text-based graphical representation of the commit history 90 on the left hand side of the output. This may cause extra lines 91 to be printed in between commits, in order for the graph history 92 to be drawn properly. 93+ 94This implies the '--topo-order' option by default, but the 95'--date-order' option may also be specified. 96 97Diff Formatting 98~~~~~~~~~~~~~~~ 99 100Below are listed options that control the formatting of diff output. 101Some of them are specific to linkgit:git-rev-list[1], however other diff 102options may be given. See linkgit:git-diff-files[1] for more options. 103 104-c:: 105 106 This flag changes the way a merge commit is displayed. It shows 107 the differences from each of the parents to the merge result 108 simultaneously instead of showing pairwise diff between a parent 109 and the result one at a time. Furthermore, it lists only files 110 which were modified from all parents. 111 112--cc:: 113 114 This flag implies the '-c' options and further compresses the 115 patch output by omitting uninteresting hunks whose contents in 116 the parents have only two variants and the merge result picks 117 one of them without modification. 118 119-r:: 120 121 Show recursive diffs. 122 123-t:: 124 125 Show the tree objects in the diff output. This implies '-r'. 126 127Commit Limiting 128~~~~~~~~~~~~~~~ 129 130Besides specifying a range of commits that should be listed using the 131special notations explained in the description, additional commit 132limiting may be applied. 133 134-- 135 136-n 'number':: 137--max-count='number':: 138 139 Limit the number of commits output. 140 141--skip='number':: 142 143 Skip 'number' commits before starting to show the commit output. 144 145--since='date':: 146--after='date':: 147 148 Show commits more recent than a specific date. 149 150--until='date':: 151--before='date':: 152 153 Show commits older than a specific date. 154 155ifdef::git-rev-list[] 156--max-age='timestamp':: 157--min-age='timestamp':: 158 159 Limit the commits output to specified time range. 160endif::git-rev-list[] 161 162--author='pattern':: 163--committer='pattern':: 164 165 Limit the commits output to ones with author/committer 166 header lines that match the specified pattern (regular expression). 167 168--grep='pattern':: 169 170 Limit the commits output to ones with log message that 171 matches the specified pattern (regular expression). 172 173-i:: 174--regexp-ignore-case:: 175 176 Match the regexp limiting patterns without regard to letters case. 177 178-E:: 179--extended-regexp:: 180 181 Consider the limiting patterns to be extended regular expressions 182 instead of the default basic regular expressions. 183 184-F:: 185--fixed-strings:: 186 187 Consider the limiting patterns to be fixed strings (don't interpret 188 pattern as a regular expression). 189 190--remove-empty:: 191 192 Stop when a given path disappears from the tree. 193 194--full-history:: 195 196 Show also parts of history irrelevant to current state of a given 197 path. This turns off history simplification, which removed merges 198 which didn't change anything at all at some child. It will still actually 199 simplify away merges that didn't change anything at all into either 200 child. 201 202--no-merges:: 203 204 Do not print commits with more than one parent. 205 206--first-parent:: 207 Follow only the first parent commit upon seeing a merge 208 commit. This option can give a better overview when 209 viewing the evolution of a particular topic branch, 210 because merges into a topic branch tend to be only about 211 adjusting to updated upstream from time to time, and 212 this option allows you to ignore the individual commits 213 brought in to your history by such a merge. 214 215--not:: 216 217 Reverses the meaning of the '{caret}' prefix (or lack thereof) 218 for all following revision specifiers, up to the next '--not'. 219 220--all:: 221 222 Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the 223 command line as '<commit>'. 224 225ifdef::git-rev-list[] 226--stdin:: 227 228 In addition to the '<commit>' listed on the command 229 line, read them from the standard input. 230 231--quiet:: 232 233 Don't print anything to standard output. This form 234 is primarily meant to allow the caller to 235 test the exit status to see if a range of objects is fully 236 connected (or not). It is faster than redirecting stdout 237 to /dev/null as the output does not have to be formatted. 238endif::git-rev-list[] 239 240--cherry-pick:: 241 242 Omit any commit that introduces the same change as 243 another commit on the "other side" when the set of 244 commits are limited with symmetric difference. 245+ 246For example, if you have two branches, `A` and `B`, a usual way 247to list all commits on only one side of them is with 248`--left-right`, like the example above in the description of 249that option. It however shows the commits that were cherry-picked 250from the other branch (for example, "3rd on b" may be cherry-picked 251from branch A). With this option, such pairs of commits are 252excluded from the output. 253 254-g:: 255--walk-reflogs:: 256 257 Instead of walking the commit ancestry chain, walk 258 reflog entries from the most recent one to older ones. 259 When this option is used you cannot specify commits to 260 exclude (that is, '{caret}commit', 'commit1..commit2', 261 nor 'commit1...commit2' notations cannot be used). 262+ 263With '\--pretty' format other than oneline (for obvious reasons), 264this causes the output to have two extra lines of information 265taken from the reflog. By default, 'commit@\{Nth}' notation is 266used in the output. When the starting commit is specified as 267'commit@{now}', output also uses 'commit@\{timestamp}' notation 268instead. Under '\--pretty=oneline', the commit message is 269prefixed with this information on the same line. 270 271Cannot be combined with '\--reverse'. 272See also linkgit:git-reflog[1]. 273 274--merge:: 275 276 After a failed merge, show refs that touch files having a 277 conflict and don't exist on all heads to merge. 278 279--boundary:: 280 281 Output uninteresting commits at the boundary, which are usually 282 not shown. 283 284--dense:: 285--sparse:: 286 287When optional paths are given, the default behaviour ('--dense') is to 288only output commits that changes at least one of them, and also ignore 289merges that do not touch the given paths. 290 291Use the '--sparse' flag to makes the command output all eligible commits 292(still subject to count and age limitation), but apply merge 293simplification nevertheless. 294 295ifdef::git-rev-list[] 296--bisect:: 297 298Limit output to the one commit object which is roughly halfway between 299the included and excluded commits. Thus, if 300 301----------------------------------------------------------------------- 302 $ git-rev-list --bisect foo ^bar ^baz 303----------------------------------------------------------------------- 304 305outputs 'midpoint', the output of the two commands 306 307----------------------------------------------------------------------- 308 $ git-rev-list foo ^midpoint 309 $ git-rev-list midpoint ^bar ^baz 310----------------------------------------------------------------------- 311 312would be of roughly the same length. Finding the change which 313introduces a regression is thus reduced to a binary search: repeatedly 314generate and test new 'midpoint's until the commit chain is of length 315one. 316 317--bisect-vars:: 318 319This calculates the same as `--bisect`, but outputs text ready 320to be eval'ed by the shell. These lines will assign the name of 321the midpoint revision to the variable `bisect_rev`, and the 322expected number of commits to be tested after `bisect_rev` is 323tested to `bisect_nr`, the expected number of commits to be 324tested if `bisect_rev` turns out to be good to `bisect_good`, 325the expected number of commits to be tested if `bisect_rev` 326turns out to be bad to `bisect_bad`, and the number of commits 327we are bisecting right now to `bisect_all`. 328 329--bisect-all:: 330 331This outputs all the commit objects between the included and excluded 332commits, ordered by their distance to the included and excluded 333commits. The farthest from them is displayed first. (This is the only 334one displayed by `--bisect`.) 335 336This is useful because it makes it easy to choose a good commit to 337test when you want to avoid to test some of them for some reason (they 338may not compile for example). 339 340This option can be used along with `--bisect-vars`, in this case, 341after all the sorted commit objects, there will be the same text as if 342`--bisect-vars` had been used alone. 343endif::git-rev-list[] 344 345-- 346 347Commit Ordering 348~~~~~~~~~~~~~~~ 349 350By default, the commits are shown in reverse chronological order. 351 352--topo-order:: 353 354 This option makes them appear in topological order (i.e. 355 descendant commits are shown before their parents). 356 357--date-order:: 358 359 This option is similar to '--topo-order' in the sense that no 360 parent comes before all of its children, but otherwise things 361 are still ordered in the commit timestamp order. 362 363--reverse:: 364 365 Output the commits in reverse order. 366 Cannot be combined with '\--walk-reflogs'. 367 368Object Traversal 369~~~~~~~~~~~~~~~~ 370 371These options are mostly targeted for packing of git repositories. 372 373--objects:: 374 375 Print the object IDs of any object referenced by the listed 376 commits. '--objects foo ^bar' thus means "send me 377 all object IDs which I need to download if I have the commit 378 object 'bar', but not 'foo'". 379 380--objects-edge:: 381 382 Similar to '--objects', but also print the IDs of excluded 383 commits prefixed with a "-" character. This is used by 384 linkgit:git-pack-objects[1] to build "thin" pack, which records 385 objects in deltified form based on objects contained in these 386 excluded commits to reduce network traffic. 387 388--unpacked:: 389 390 Only useful with '--objects'; print the object IDs that are not 391 in packs. 392 393--no-walk:: 394 395 Only show the given revs, but do not traverse their ancestors. 396 397--do-walk:: 398 399 Overrides a previous --no-walk.