Checklist (and a short version for the impatient): Commits: - make commits of logical units - check for unnecessary whitespace with "git diff --check" before committing - do not check in commented out code or unneeded files - the first line of the commit message should be a short description (50 characters is the soft limit, see DISCUSSION in git-commit(1)), and should skip the full stop - it is also conventional in most cases to prefix the first line with "area: " where the area is a filename or identifier for the general area of the code being modified, e.g. . archive: ustar header checksum is computed unsigned . git-cherry-pick.txt: clarify the use of revision range notation (if in doubt which identifier to use, run "git log --no-merges" on the files you are modifying to see the current conventions) - the body should provide a meaningful commit message, which: . explains the problem the change tries to solve, iow, what is wrong with the current code without the change. . justifies the way the change solves the problem, iow, why the result with the change is better. . alternate solutions considered but discarded, if any. - describe changes in imperative mood, e.g. "make xyzzy do frotz" instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy to do frotz", as if you are giving orders to the codebase to change its behaviour. - try to make sure your explanation can be understood without external resources. Instead of giving a URL to a mailing list archive, summarize the relevant points of the discussion. - add a "Signed-off-by: Your Name " line to the commit message (or just use the option "-s" when committing) to confirm that you agree to the Developer's Certificate of Origin - make sure that you have tests for the bug you are fixing - make sure that the test suite passes after your commit Patch: - use "git format-patch -M" to create the patch - do not PGP sign your patch - do not attach your patch, but read in the mail body, unless you cannot teach your mailer to leave the formatting of the patch alone. - be careful doing cut & paste into your mailer, not to corrupt whitespaces. - provide additional information (which is unsuitable for the commit message) between the "---" and the diffstat - if you change, add, or remove a command line option or make some other user interface change, the associated documentation should be updated as well. - if your name is not writable in ASCII, make sure that you send off a message in the correct encoding. - send the patch to the list (git@vger.kernel.org) and the maintainer (gitster@pobox.com) if (and only if) the patch is ready for inclusion. If you use git-send-email(1), please test it first by sending email to yourself. - see below for instructions specific to your mailer Long version: I started reading over the SubmittingPatches document for Linux kernel, primarily because I wanted to have a document similar to it for the core GIT to make sure people understand what they are doing when they write "Signed-off-by" line. But the patch submission requirements are a lot more relaxed here on the technical/contents front, because the core GIT is thousand times smaller ;-). So here is only the relevant bits. (0) Decide what to base your work on. In general, always base your work on the oldest branch that your change is relevant to. - A bugfix should be based on 'maint' in general. If the bug is not present in 'maint', base it on 'master'. For a bug that's not yet in 'master', find the topic that introduces the regression, and base your work on the tip of the topic. - A new feature should be based on 'master' in general. If the new feature depends on a topic that is in 'pu', but not in 'master', base your work on the tip of that topic. - Corrections and enhancements to a topic not yet in 'master' should be based on the tip of that topic. If the topic has not been merged to 'next', it's alright to add a note to squash minor corrections into the series. - In the exceptional case that a new feature depends on several topics not in 'master', start working on 'next' or 'pu' privately and send out patches for discussion. Before the final merge, you may have to wait until some of the dependent topics graduate to 'master', and rebase your work. To find the tip of a topic branch, run "git log --first-parent master..pu" and look for the merge commit. The second parent of this commit is the tip of the topic branch. (1) Make separate commits for logically separate changes. Unless your patch is really trivial, you should not be sending out a patch that was generated between your working tree and your commit head. Instead, always make a commit with complete commit message and generate a series of patches from your repository. It is a good discipline. Give an explanation for the change(s) that is detailed enough so that people can judge if it is good thing to do, without reading the actual patch text to determine how well the code does what the explanation promises to do. If your description starts to get too long, that's a sign that you probably need to split up your commit to finer grained pieces. That being said, patches which plainly describe the things that help reviewers check the patch, and future maintainers understand the code, are the most beautiful patches. Descriptions that summarise the point in the subject well, and describe the motivation for the change, the approach taken by the change, and if relevant how this differs substantially from the prior version, are all good things to have. Oh, another thing. I am picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped in templates/hooks--pre-commit. To help ensure this does not happen, run git diff --check on your changes before you commit. (2) Generate your patch using git tools out of your commits. git based diff tools generate unidiff which is the preferred format. You do not have to be afraid to use -M option to "git diff" or "git format-patch", if your patch involves file renames. The receiving end can handle them just fine. Please make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch after generating it, to ensure accuracy. Before sending out, please make sure it cleanly applies to the "master" branch head. If you are preparing a work based on "next" branch, that is fine, but please mark it as such. (3) Sending your patches. People on the git mailing list need to be able to read and comment on the changes you are submitting. It is important for a developer to be able to "quote" your changes, using standard e-mail tools, so that they may comment on specific portions of your code. For this reason, all patches should be submitted "inline". WARNING: Be wary of your MUAs word-wrap corrupting your patch. Do not cut-n-paste your patch; you can lose tabs that way if you are not careful. It is a common convention to prefix your subject line with [PATCH]. This lets people easily distinguish patches from other e-mail discussions. Use of additional markers after PATCH and the closing bracket to mark the nature of the patch is also encouraged. E.g. [PATCH/RFC] is often used when the patch is not ready to be applied but it is for discussion, [PATCH v2], [PATCH v3] etc. are often seen when you are sending an update to what you have previously sent. "git format-patch" command follows the best current practice to format the body of an e-mail message. At the beginning of the patch should come your commit message, ending with the Signed-off-by: lines, and a line that consists of three dashes, followed by the diffstat information and the patch itself. If you are forwarding a patch from somebody else, optionally, at the beginning of the e-mail message just before the commit message starts, you can put a "From: " line to name that person. You often want to add additional explanation about the patch, other than the commit message itself. Place such "cover letter" material between the three dash lines and the diffstat. Git-notes can also be inserted using the `--notes` option. Do not attach the patch as a MIME attachment, compressed or not. Do not let your e-mail client send quoted-printable. Do not let your e-mail client send format=flowed which would destroy whitespaces in your patches. Many popular e-mail applications will not always transmit a MIME attachment as plain text, making it impossible to comment on your code. A MIME attachment also takes a bit more time to process. This does not decrease the likelihood of your MIME-attached change being accepted, but it makes it more likely that it will be postponed. Exception: If your mailer is mangling patches then someone may ask you to re-send them using MIME, that is OK. Do not PGP sign your patch, at least for now. Most likely, your maintainer or other people on the list would not have your PGP key and would not bother obtaining it anyway. Your patch is not judged by who you are; a good patch from an unknown origin has a far better chance of being accepted than a patch from a known, respected origin that is done poorly or does incorrect things. If you really really really really want to do a PGP signed patch, format it as "multipart/signed", not a text/plain message that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is not a text/plain, it's something else. Unless your patch is a very trivial and an obviously correct one, first send it with "To:" set to the mailing list, with "cc:" listing people who are involved in the area you are touching (the output from "git blame $path" and "git shortlog --no-merges $path" would help to identify them), to solicit comments and reviews. After the list reached a consensus that it is a good idea to apply the patch, re-send it with "To:" set to the maintainer and optionally "cc:" the list for inclusion. Do not forget to add trailers such as "Acked-by:", "Reviewed-by:" and "Tested-by:" after your "Signed-off-by:" line as necessary. (4) Sign your work To improve tracking of who did what, we've borrowed the "sign-off" procedure from the Linux kernel project on patches that are being emailed around. Although core GIT is a lot smaller project it is a good discipline to follow it. The sign-off is a simple line at the end of the explanation for the patch, which certifies that you wrote it or otherwise have the right to pass it on as a open-source patch. The rules are pretty simple: if you can certify the below: Developer's Certificate of Origin 1.1 By making a contribution to this project, I certify that: (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; or (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; or (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. then you just add a line saying Signed-off-by: Random J Developer This line can be automatically added by git if you run the git-commit command with the -s option. Notice that you can place your own Signed-off-by: line when forwarding somebody else's patch with the above rules for D-C-O. Indeed you are encouraged to do so. Do not forget to place an in-body "From: " line at the beginning to properly attribute the change to its true author (see (2) above). Also notice that a real name is used in the Signed-off-by: line. Please don't hide your real name. If you like, you can put extra tags at the end: 1. "Reported-by:" is used to credit someone who found the bug that the patch attempts to fix. 2. "Acked-by:" says that the person who is more familiar with the area the patch attempts to modify liked the patch. 3. "Reviewed-by:", unlike the other tags, can only be offered by the reviewer and means that she is completely satisfied that the patch is ready for application. It is usually offered only after a detailed review. 4. "Tested-by:" is used to indicate that the person applied the patch and found it to have the desired effect. You can also create your own tag or use one that's in common usage such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". ------------------------------------------------ An ideal patch flow Here is an ideal patch flow for this project the current maintainer suggests to the contributors: (0) You come up with an itch. You code it up. (1) Send it to the list and cc people who may need to know about the change. The people who may need to know are the ones whose code you are butchering. These people happen to be the ones who are most likely to be knowledgeable enough to help you, but they have no obligation to help you (i.e. you ask for help, don't demand). "git log -p -- $area_you_are_modifying" would help you find out who they are. (2) You get comments and suggestions for improvements. You may even get them in a "on top of your change" patch form. (3) Polish, refine, and re-send to the list and the people who spend their time to improve your patch. Go back to step (2). (4) The list forms consensus that the last round of your patch is good. Send it to the list and cc the maintainer. (5) A topic branch is created with the patch and is merged to 'next', and cooked further and eventually graduates to 'master'. In any time between the (2)-(3) cycle, the maintainer may pick it up from the list and queue it to 'pu', in order to make it easier for people play with it without having to pick up and apply the patch to their trees themselves. ------------------------------------------------ Know the status of your patch after submission * You can use Git itself to find out when your patch is merged in master. 'git pull --rebase' will automatically skip already-applied patches, and will let you know. This works only if you rebase on top of the branch in which your patch has been merged (i.e. it will not tell you if your patch is merged in pu if you rebase on top of master). * Read the git mailing list, the maintainer regularly posts messages entitled "What's cooking in git.git" and "What's in git.git" giving the status of various proposed changes. ------------------------------------------------ MUA specific hints Some of patches I receive or pick up from the list share common patterns of breakage. Please make sure your MUA is set up properly not to corrupt whitespaces. See the DISCUSSION section of git-format-patch(1) for hints on checking your patch by mailing it to yourself and applying with git-am(1). While you are at it, check the resulting commit log message from a trial run of applying the patch. If what is in the resulting commit is not exactly what you would want to see, it is very likely that your maintainer would end up hand editing the log message when he applies your patch. Things like "Hi, this is my first patch.\n", if you really want to put in the patch e-mail, should come after the three-dash line that signals the end of the commit message. Pine ---- (Johannes Schindelin) I don't know how many people still use pine, but for those poor souls it may be good to mention that the quell-flowed-text is needed for recent versions. ... the "no-strip-whitespace-before-send" option, too. AFAIK it was introduced in 4.60. (Linus Torvalds) And 4.58 needs at least this. --- diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1) Author: Linus Torvalds Date: Mon Aug 15 17:23:51 2005 -0700 Fix pine whitespace-corruption bug There's no excuse for unconditionally removing whitespace from the pico buffers on close. diff --git a/pico/pico.c b/pico/pico.c --- a/pico/pico.c +++ b/pico/pico.c @@ -219,7 +219,9 @@ PICO *pm; switch(pico_all_done){ /* prepare for/handle final events */ case COMP_EXIT : /* already confirmed */ packheader(); +#if 0 stripwhitespace(); +#endif c |= COMP_EXIT; break; (Daniel Barkalow) > A patch to SubmittingPatches, MUA specific help section for > users of Pine 4.63 would be very much appreciated. Ah, it looks like a recent version changed the default behavior to do the right thing, and inverted the sense of the configuration option. (Either that or Gentoo did it.) So you need to set the "no-strip-whitespace-before-send" option, unless the option you have is "strip-whitespace-before-send", in which case you should avoid checking it. Thunderbird, KMail, GMail ------------------------- See the MUA-SPECIFIC HINTS section of git-format-patch(1). Gnus ---- '|' in the *Summary* buffer can be used to pipe the current message to an external program, and this is a handy way to drive "git am". However, if the message is MIME encoded, what is piped into the program is the representation you see in your *Article* buffer after unwrapping MIME. This is often not what you would want for two reasons. It tends to screw up non ASCII characters (most notably in people's names), and also whitespaces (fatal in patches). Running 'C-u g' to display the message in raw form before using '|' to run the pipe can work this problem around.