git-commit(1) ============= NAME ---- git-commit - Record changes to the repository SYNOPSIS -------- [verse] 'git commit' [-a | --interactive] [-s] [-v] [-u] [--amend] [--dry-run] [(-c | -C) ] [-F | -m ] [--dry-run] [--allow-empty] [--no-verify] [-e] [--author=] [--cleanup=] [--] [[-i | -o ]...] DESCRIPTION ----------- Stores the current contents of the index in a new commit along with a log message from the user describing the changes. The content to be added can be specified in several ways: 1. by using 'git-add' to incrementally "add" changes to the index before using the 'commit' command (Note: even modified files must be "added"); 2. by using 'git-rm' to remove files from the working tree and the index, again before using the 'commit' command; 3. by listing files as arguments to the 'commit' command, in which case the commit will ignore changes staged in the index, and instead record the current content of the listed files (which must already be known to git); 4. by using the -a switch with the 'commit' command to automatically "add" changes from all known files (i.e. all files that are already listed in the index) and to automatically "rm" files in the index that have been removed from the working tree, and then perform the actual commit; 5. by using the --interactive switch with the 'commit' command to decide one by one which files should be part of the commit, before finalizing the operation. Currently, this is done by invoking 'git-add --interactive'. The `--dry-run` option can be used to obtain a summary of what is included by any of the above for the next commit by giving the same set of parameters (options and paths). If you make a commit and then find a mistake immediately after that, you can recover from it with 'git-reset'. OPTIONS ------- -a:: --all:: Tell the command to automatically stage files that have been modified and deleted, but new files you have not told git about are not affected. -C :: --reuse-message=:: Take an existing commit object, and reuse the log message and the authorship information (including the timestamp) when creating the commit. -c :: --reedit-message=:: Like '-C', but with '-c' the editor is invoked, so that the user can further edit the commit message. --dry-run:: Do not actually make a commit, but show the list of paths with updates in the index, paths with changes in the work tree, and paths that are untracked, similar to the one that is given in the commit log editor. --short:: When doing a dry-run, give the output in the short-format. See linkgit:git-status[1] for details. Implies `--dry-run`. --porcelain:: When doing a dry-run, give the output in a porcelain-ready format. See linkgit:git-status[1] for details. Implies `--dry-run`. -z:: When showing `short` or `porcelain` status output, terminate entries in the status output with NUL, instead of LF. If no format is given, implies the `--porcelain` output format. -F :: --file=:: Take the commit message from the given file. Use '-' to read the message from the standard input. --author=:: Override the author name used in the commit. You can use the standard `A U Thor ` format. Otherwise, an existing commit that matches the given string and its author name is used. -m :: --message=:: Use the given as the commit message. -t :: --template=:: Use the contents of the given file as the initial version of the commit message. The editor is invoked and you can make subsequent changes. If a message is specified using the `-m` or `-F` options, this option has no effect. This overrides the `commit.template` configuration variable. -s:: --signoff:: Add Signed-off-by line by the committer at the end of the commit log message. -n:: --no-verify:: This option bypasses the pre-commit and commit-msg hooks. See also linkgit:githooks[5]. --allow-empty:: Usually recording a commit that has the exact same tree as its sole parent commit is a mistake, and the command prevents you from making such a commit. This option bypasses the safety, and is primarily for use by foreign scm interface scripts. --cleanup=:: This option sets how the commit message is cleaned up. The '' can be one of 'verbatim', 'whitespace', 'strip', and 'default'. The 'default' mode will strip leading and trailing empty lines and #commentary from the commit message only if the message is to be edited. Otherwise only whitespace removed. The 'verbatim' mode does not change message at all, 'whitespace' removes just leading/trailing whitespace lines and 'strip' removes both whitespace and commentary. -e:: --edit:: The message taken from file with `-F`, command line with `-m`, and from file with `-C` are usually used as the commit log message unmodified. This option lets you further edit the message taken from these sources. --amend:: Used to amend the tip of the current branch. Prepare the tree object you would want to replace the latest commit as usual (this includes the usual -i/-o and explicit paths), and the commit log editor is seeded with the commit message from the tip of the current branch. The commit you create replaces the current tip -- if it was a merge, it will have the parents of the current tip as parents -- so the current top commit is discarded. + -- It is a rough equivalent for: ------ $ git reset --soft HEAD^ $ ... do something else to come up with the right tree ... $ git commit -c ORIG_HEAD ------ but can be used to amend a merge commit. -- + You should understand the implications of rewriting history if you amend a commit that has already been published. (See the "RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) -i:: --include:: Before making a commit out of staged contents so far, stage the contents of paths given on the command line as well. This is usually not what you want unless you are concluding a conflicted merge. -o:: --only:: Make a commit only from the paths specified on the command line, disregarding any contents that have been staged so far. This is the default mode of operation of 'git-commit' if any paths are given on the command line, in which case this option can be omitted. If this option is specified together with '--amend', then no paths need to be specified, which can be used to amend the last commit without committing changes that have already been staged. -u[]:: --untracked-files[=]:: Show untracked files (Default: 'all'). + The mode parameter is optional, and is used to specify the handling of untracked files. The possible options are: + -- - 'no' - Show no untracked files - 'normal' - Shows untracked files and directories - 'all' - Also shows individual files in untracked directories. -- + See linkgit:git-config[1] for configuration variable used to change the default for when the option is not specified. -v:: --verbose:: Show unified diff between the HEAD commit and what would be committed at the bottom of the commit message template. Note that this diff output doesn't have its lines prefixed with '#'. -q:: --quiet:: Suppress commit summary message. --dry-run:: Do not create a commit, but show a list of paths that are to be committed, paths with local changes that will be left uncommitted and paths that are untracked. \--:: Do not interpret any more arguments as options. ...:: When files are given on the command line, the command commits the contents of the named files, without recording the changes already staged. The contents of these files are also staged for the next commit on top of what have been staged before. EXAMPLES -------- When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area called the "index" with 'git-add'. A file can be reverted back, only in the index but not in the working tree, to that of the last commit with `git reset HEAD -- `, which effectively reverts 'git-add' and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, `git commit` (without any pathname parameter) is used to record what has been staged so far. This is the most basic form of the command. An example: ------------ $ edit hello.c $ git rm goodbye.c $ git add hello.c $ git commit ------------ Instead of staging files after each individual change, you can tell `git commit` to notice the changes to the files whose contents are tracked in your working tree and do corresponding `git add` and `git rm` for you. That is, this example does the same as the earlier example if there is no other change in your working tree: ------------ $ edit hello.c $ rm goodbye.c $ git commit -a ------------ The command `git commit -a` first looks at your working tree, notices that you have modified hello.c and removed goodbye.c, and performs necessary `git add` and `git rm` for you. After staging changes to many files, you can alter the order the changes are recorded in, by giving pathnames to `git commit`. When pathnames are given, the command makes a commit that only records the changes made to the named paths: ------------ $ edit hello.c hello.h $ git add hello.c hello.h $ edit Makefile $ git commit Makefile ------------ This makes a commit that records the modification to `Makefile`. The changes staged for `hello.c` and `hello.h` are not included in the resulting commit. However, their changes are not lost -- they are still staged and merely held back. After the above sequence, if you do: ------------ $ git commit ------------ this second commit would record the changes to `hello.c` and `hello.h` as expected. After a merge (initiated by 'git-merge' or 'git-pull') stops because of conflicts, cleanly merged paths are already staged to be committed for you, and paths that conflicted are left in unmerged state. You would have to first check which paths are conflicting with 'git-status' and after fixing them manually in your working tree, you would stage the result as usual with 'git-add': ------------ $ git status | grep unmerged unmerged: hello.c $ edit hello.c $ git add hello.c ------------ After resolving conflicts and staging the result, `git ls-files -u` would stop mentioning the conflicted path. When you are done, run `git commit` to finally record the merge: ------------ $ git commit ------------ As with the case to record your own changes, you can use `-a` option to save typing. One difference is that during a merge resolution, you cannot use `git commit` with pathnames to alter the order the changes are committed, because the merge should be recorded as a single commit. In fact, the command refuses to run when given pathnames (but see `-i` option). DISCUSSION ---------- Though not required, it's a good idea to begin the commit message with a single short (less than 50 character) line summarizing the change, followed by a blank line and then a more thorough description. Tools that turn commits into email, for example, use the first line on the Subject: line and the rest of the commit in the body. include::i18n.txt[] ENVIRONMENT AND CONFIGURATION VARIABLES --------------------------------------- The editor used to edit the commit log message will be chosen from the GIT_EDITOR environment variable, the core.editor configuration variable, the VISUAL environment variable, or the EDITOR environment variable (in that order). HOOKS ----- This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`, and `post-commit` hooks. See linkgit:githooks[5] for more information. SEE ALSO -------- linkgit:git-add[1], linkgit:git-rm[1], linkgit:git-mv[1], linkgit:git-merge[1], linkgit:git-commit-tree[1] Author ------ Written by Linus Torvalds and Junio C Hamano GIT --- Part of the linkgit:git[1] suite