git-push(1) =========== NAME ---- git-push - Update remote refs along with associated objects SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=] [--repo=] [-f | --force] [-v | --verbose] [-u | --set-upstream] [ ...] DESCRIPTION ----------- Updates remote refs using local refs, while sending objects necessary to complete the given refs. You can make interesting things happen to a repository every time you push into it, by setting up 'hooks' there. See documentation for linkgit:git-receive-pack[1]. OPTIONS[[OPTIONS]] ------------------ :: The "remote" repository that is destination of a push operation. This parameter can be either a URL (see the section <> below) or the name of a remote (see the section <> below). ...:: The format of a parameter is an optional plus `{plus}`, followed by the source ref , followed by a colon `:`, followed by the destination ref . It is used to specify with what object the ref in the remote repository is to be updated. + The is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or `HEAD` (see linkgit:git-rev-parse[1]). + The tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must be named. If `:` is omitted, the same ref as will be updated. + The object referenced by is used to update the reference on the remote side, but by default this is only allowed if the update can fast-forward . By having the optional leading `{plus}`, you can tell git to update the ref even when the update is not a fast-forward. This does *not* attempt to merge into . See EXAMPLES below for details. + `tag ` means the same as `refs/tags/:refs/tags/`. + Pushing an empty allows you to delete the ref from the remote repository. + The special refspec `:` (or `{plus}:` to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode if no explicit refspec is found (that is neither on the command line nor in any Push line of the corresponding remotes file---see below). --all:: Instead of naming each ref to push, specifies that all refs under `$GIT_DIR/refs/heads/` be pushed. --mirror:: Instead of naming each ref to push, specifies that all refs under `$GIT_DIR/refs/` (which includes but is not limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs will be force updated on the remote end, and deleted refs will be removed from the remote end. This is the default if the configuration option `remote..mirror` is set. -n:: --dry-run:: Do everything except actually send the updates. --porcelain:: Produce machine-readable output. The output status line for each ref will be tab-separated and sent to stdout instead of stderr. The full symbolic names of the refs will be given. --delete:: All listed refs are deleted from the remote repository. This is the same as prefixing all refs with a colon. --tags:: All refs under `$GIT_DIR/refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. --receive-pack=:: --exec=:: Path to the 'git-receive-pack' program on the remote end. Sometimes useful when pushing to a remote repository over ssh, and you do not have the program in a directory on the default $PATH. -f:: --force:: Usually, the command refuses to update a remote ref that is not an ancestor of the local ref used to overwrite it. This flag disables the check. This can cause the remote repository to lose commits; use it with care. --repo=:: This option is only relevant if no argument is passed in the invocation. In this case, 'git push' derives the remote name from the current branch: If it tracks a remote branch, then that remote repository is pushed to. Otherwise, the name "origin" is used. For this latter case, this option can be used to override the name "origin". In other words, the difference between these two commands + -------------------------- git push public #1 git push --repo=public #2 -------------------------- + is that #1 always pushes to "public" whereas #2 pushes to "public" only if the current branch does not track a remote branch. This is useful if you write an alias or script around 'git push'. -u:: --set-upstream:: For every branch that is up to date or successfully pushed, add upstream (tracking) reference, used by argument-less linkgit:git-pull[1] and other commands. For more information, see 'branch..merge' in linkgit:git-config[1]. --thin:: --no-thin:: These options are passed to 'git send-pack'. Thin transfer spends extra cycles to minimize the number of objects to be sent and meant to be used on slower connection. -q:: --quiet:: Suppress all output, including the listing of updated refs, unless an error occurs. Progress is not reported to the standard error stream. -v:: --verbose:: Run verbosely. --progress:: Progress status is reported on the standard error stream by default when it is attached to a terminal, unless -q is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. include::urls-remotes.txt[] OUTPUT ------ The output of "git push" depends on the transport method used; this section describes the output when pushing over the git protocol (either locally or via ssh). The status of the push is output in tabular form, with each line representing the status of a single ref. Each line is of the form: ------------------------------- -> () ------------------------------- If --porcelain is used, then each line of the output is of the form: ------------------------------- \t : \t () ------------------------------- The status of up-to-date refs is shown only if --porcelain or --verbose option is used. flag:: A single character indicating the status of the ref: (space);; for a successfully pushed fast-forward; `{plus}`;; for a successful forced update; `-`;; for a successfully deleted ref; `*`;; for a successfully pushed new ref; `!`;; for a ref that was rejected or failed to push; and `=`;; for a ref that was up to date and did not need pushing. summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `..` in most cases, and `...` for forced non-fast-forward updates). For a failed update, more details are given for the failure. The string `rejected` indicates that git did not try to send the ref at all (typically because it is not a fast-forward). The string `remote rejected` indicates that the remote end refused the update; this rejection is typically caused by a hook on the remote side. The string `remote failure` indicates that the remote end did not report the successful update of the ref (perhaps because of a temporary error on the remote side, a break in the network connection, or other transient error). from:: The name of the local ref being pushed, minus its `refs//` prefix. In the case of deletion, the name of the local ref is omitted. to:: The name of the remote ref being updated, minus its `refs//` prefix. reason:: A human-readable explanation. In the case of successfully pushed refs, no explanation is needed. For a failed ref, the reason for failure is described. Note about fast-forwards ------------------------ When an update changes a branch (or more in general, a ref) that used to point at commit A to point at another commit B, it is called a fast-forward update if and only if B is a descendant of A. In a fast-forward update from A to B, the set of commits that the original commit A built on top of is a subset of the commits the new commit B builds on top of. Hence, it does not lose any history. In contrast, a non-fast-forward update will lose history. For example, suppose you and somebody else started at the same commit X, and you built a history leading to commit B while the other person built a history leading to commit A. The history looks like this: ---------------- B / ---X---A ---------------- Further suppose that the other person already pushed changes leading to A back to the original repository you two obtained the original commit X. The push done by the other person updated the branch that used to point at commit X to point at commit A. It is a fast-forward. But if you try to push, you will attempt to update the branch (that now points at A) with commit B. This does _not_ fast-forward. If you did so, the changes introduced by commit A will be lost, because everybody will now start building on top of B. The command by default does not allow an update that is not a fast-forward to prevent such loss of history. If you do not want to lose your work (history from X to B) nor the work by the other person (history from X to A), you would need to first fetch the history from the repository, create a history that contains changes done by both parties, and push the result back. You can perform "git pull", resolve potential conflicts, and "git push" the result. A "git pull" will create a merge commit C between commits A and B. ---------------- B---C / / ---X---A ---------------- Updating A with the resulting merge commit will fast-forward and your push will be accepted. Alternatively, you can rebase your change between X and B on top of A, with "git pull --rebase", and push the result back. The rebase will create a new commit D that builds the change between X and B on top of A. ---------------- B D / / ---X---A ---------------- Again, updating A with this commit will fast-forward and your push will be accepted. There is another common situation where you may encounter non-fast-forward rejection when you try to push, and it is possible even when you are pushing into a repository nobody else pushes into. After you push commit A yourself (in the first picture in this section), replace it with "git commit --amend" to produce commit B, and you try to push it out, because forgot that you have pushed A out already. In such a case, and only if you are certain that nobody in the meantime fetched your earlier commit A (and started building on top of it), you can run "git push --force" to overwrite it. In other words, "git push --force" is a method reserved for a case where you do mean to lose history. Examples -------- git push:: Works like `git push `, where is the current branch's remote (or `origin`, if no remote is configured for the current branch). git push origin:: Without additional configuration, works like `git push origin :`. + The default behavior of this command when no is given can be configured by setting the `push` option of the remote. + For example, to default to pushing only the current branch to `origin` use `git config remote.origin.push HEAD`. Any valid (like the ones in the examples below) can be configured as the default for `git push origin`. git push origin ::: Push "matching" branches to `origin`. See in the <> section above for a description of "matching" branches. git push origin master:: Find a ref that matches `master` in the source repository (most likely, it would find `refs/heads/master`), and update the same ref (e.g. `refs/heads/master`) in `origin` repository with it. If `master` did not exist remotely, it would be created. git push origin HEAD:: A handy way to push the current branch to the same name on the remote. git push origin master:satellite/master dev:satellite/dev:: Use the source ref that matches `master` (e.g. `refs/heads/master`) to update the ref that matches `satellite/master` (most probably `refs/remotes/satellite/master`) in the `origin` repository, then do the same for `dev` and `satellite/dev`. git push origin HEAD:master:: Push the current branch to the remote ref matching `master` in the `origin` repository. This form is convenient to push the current branch without thinking about its local name. git push origin master:refs/heads/experimental:: Create the branch `experimental` in the `origin` repository by copying the current `master` branch. This form is only needed to create a new branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work. git push origin :experimental:: Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. git push origin {plus}dev:master:: Update the origin repository's master branch with the dev branch, allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the following situation, where a fast-forward is not possible: + ---- o---o---o---A---B origin/master \ X---Y---Z dev ---- + The above command would change the origin repository to + ---- A---B (unnamed branch) / o---o---o---X---Y---Z master ---- + Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. Author ------ Written by Junio C Hamano , later rewritten in C by Linus Torvalds Documentation -------------- Documentation by Junio C Hamano and the git-list . GIT --- Part of the linkgit:git[1] suite