Checklist (and a short version for the impatient): - make commits of logical units - check for unnecessary whitespace with "git diff --check" before committing - do not check in commented out code or unneeded files - provide a meaningful commit message - the first line of the commit message should be a short description and should skip the full stop - if you want your work included in git.git, add a "Signed-off-by: Your Name " line to the commit message (or just use the option "-s" when committing) to confirm that you agree to the Developer's Certificate of Origin - do not PGP sign your patch - use "git format-patch -M" to create the patch - do not attach your patch, but read in the mail body, unless you cannot teach your mailer to leave the formatting of the patch alone. - be careful doing cut & paste into your mailer, not to corrupt whitespaces. - provide additional information (which is unsuitable for the commit message) between the "---" and the diffstat - send the patch to the list _and_ the maintainer - if you change, add, or remove a command line option or make some other user interface change, the associated documentation should be updated as well. Long version: I started reading over the SubmittingPatches document for Linux kernel, primarily because I wanted to have a document similar to it for the core GIT to make sure people understand what they are doing when they write "Signed-off-by" line. But the patch submission requirements are a lot more relaxed here on the technical/contents front, because the core GIT is thousand times smaller ;-). So here is only the relevant bits. (1) Make separate commits for logically separate changes. Unless your patch is really trivial, you should not be sending out a patch that was generated between your working tree and your commit head. Instead, always make a commit with complete commit message and generate a series of patches from your repository. It is a good discipline. Describe the technical detail of the change(s). If your description starts to get too long, that's a sign that you probably need to split up your commit to finer grained pieces. Oh, another thing. I am picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped in templates/hooks--pre-commit. To help ensure this does not happen, run git diff --check on your changes before you commit. (2) Generate your patch using git tools out of your commits. git based diff tools (git, Cogito, and StGIT included) generate unidiff which is the preferred format. You do not have to be afraid to use -M option to "git diff" or "git format-patch", if your patch involves file renames. The receiving end can handle them just fine. Please make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch after generating it, to ensure accuracy. Before sending out, please make sure it cleanly applies to the "master" branch head. If you are preparing a work based on "next" branch, that is fine, but please mark it as such. (3) Sending your patches. People on the git mailing list need to be able to read and comment on the changes you are submitting. It is important for a developer to be able to "quote" your changes, using standard e-mail tools, so that they may comment on specific portions of your code. For this reason, all patches should be submitted "inline". WARNING: Be wary of your MUAs word-wrap corrupting your patch. Do not cut-n-paste your patch; you can lose tabs that way if you are not careful. It is a common convention to prefix your subject line with [PATCH]. This lets people easily distinguish patches from other e-mail discussions. "git format-patch" command follows the best current practice to format the body of an e-mail message. At the beginning of the patch should come your commit message, ending with the Signed-off-by: lines, and a line that consists of three dashes, followed by the diffstat information and the patch itself. If you are forwarding a patch from somebody else, optionally, at the beginning of the e-mail message just before the commit message starts, you can put a "From: " line to name that person. You often want to add additional explanation about the patch, other than the commit message itself. Place such "cover letter" material between the three dash lines and the diffstat. Do not attach the patch as a MIME attachment, compressed or not. Do not let your e-mail client send quoted-printable. Do not let your e-mail client send format=flowed which would destroy whitespaces in your patches. Many popular e-mail applications will not always transmit a MIME attachment as plain text, making it impossible to comment on your code. A MIME attachment also takes a bit more time to process. This does not decrease the likelihood of your MIME-attached change being accepted, but it makes it more likely that it will be postponed. Exception: If your mailer is mangling patches then someone may ask you to re-send them using MIME, that is OK. Do not PGP sign your patch, at least for now. Most likely, your maintainer or other people on the list would not have your PGP key and would not bother obtaining it anyway. Your patch is not judged by who you are; a good patch from an unknown origin has a far better chance of being accepted than a patch from a known, respected origin that is done poorly or does incorrect things. If you really really really really want to do a PGP signed patch, format it as "multipart/signed", not a text/plain message that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is not a text/plain, it's something else. Note that your maintainer does not necessarily read everything on the git mailing list. If your patch is for discussion first, send it "To:" the mailing list, and optionally "cc:" him. If it is trivially correct or after the list reached a consensus, send it "To:" the maintainer and optionally "cc:" the list. Also note that your maintainer does not actively involve himself in maintaining what are in contrib/ hierarchy. When you send fixes and enhancements to them, do not forget to "cc: " the person who primarily worked on that hierarchy in contrib/. (4) Sign your work To improve tracking of who did what, we've borrowed the "sign-off" procedure from the Linux kernel project on patches that are being emailed around. Although core GIT is a lot smaller project it is a good discipline to follow it. The sign-off is a simple line at the end of the explanation for the patch, which certifies that you wrote it or otherwise have the right to pass it on as a open-source patch. The rules are pretty simple: if you can certify the below: Developer's Certificate of Origin 1.1 By making a contribution to this project, I certify that: (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; or (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; or (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. then you just add a line saying Signed-off-by: Random J Developer This line can be automatically added by git if you run the git-commit command with the -s option. Some people also put extra tags at the end. They'll just be ignored for now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. ------------------------------------------------ MUA specific hints Some of patches I receive or pick up from the list share common patterns of breakage. Please make sure your MUA is set up properly not to corrupt whitespaces. Here are two common ones I have seen: * Empty context lines that do not have _any_ whitespace. * Non empty context lines that have one extra whitespace at the beginning. One test you could do yourself if your MUA is set up correctly is: * Send the patch to yourself, exactly the way you would, except To: and Cc: lines, which would not contain the list and maintainer address. * Save that patch to a file in UNIX mailbox format. Call it say a.patch. * Try to apply to the tip of the "master" branch from the git.git public repository: $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply $ git checkout test-apply $ git reset --hard $ git applymbox a.patch If it does not apply correctly, there can be various reasons. * Your patch itself does not apply cleanly. That is _bad_ but does not have much to do with your MUA. Please rebase the patch appropriately. * Your MUA corrupted your patch; applymbox would complain that the patch does not apply. Look at .dotest/ subdirectory and see what 'patch' file contains and check for the common corruption patterns mentioned above. * While you are at it, check what are in 'info' and 'final-commit' files as well. If what is in 'final-commit' is not exactly what you would want to see in the commit log message, it is very likely that your maintainer would end up hand editing the log message when he applies your patch. Things like "Hi, this is my first patch.\n", if you really want to put in the patch e-mail, should come after the three-dash line that signals the end of the commit message. Pine ---- (Johannes Schindelin) I don't know how many people still use pine, but for those poor souls it may be good to mention that the quell-flowed-text is needed for recent versions. ... the "no-strip-whitespace-before-send" option, too. AFAIK it was introduced in 4.60. (Linus Torvalds) And 4.58 needs at least this. --- diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1) Author: Linus Torvalds Date: Mon Aug 15 17:23:51 2005 -0700 Fix pine whitespace-corruption bug There's no excuse for unconditionally removing whitespace from the pico buffers on close. diff --git a/pico/pico.c b/pico/pico.c --- a/pico/pico.c +++ b/pico/pico.c @@ -219,7 +219,9 @@ PICO *pm; switch(pico_all_done){ /* prepare for/handle final events */ case COMP_EXIT : /* already confirmed */ packheader(); +#if 0 stripwhitespace(); +#endif c |= COMP_EXIT; break; (Daniel Barkalow) > A patch to SubmittingPatches, MUA specific help section for > users of Pine 4.63 would be very much appreciated. Ah, it looks like a recent version changed the default behavior to do the right thing, and inverted the sense of the configuration option. (Either that or Gentoo did it.) So you need to set the "no-strip-whitespace-before-send" option, unless the option you have is "strip-whitespace-before-send", in which case you should avoid checking it. Thunderbird ----------- (A Large Angry SCM) Here are some hints on how to successfully submit patches inline using Thunderbird. This recipe appears to work with the current [*1*] Thunderbird from Suse. The following Thunderbird extensions are needed: AboutConfig 0.5 http://aboutconfig.mozdev.org/ External Editor 0.7.2 http://globs.org/articles.php?lng=en&pg=8 1) Prepare the patch as a text file using your method of choice. 2) Before opening a compose window, use Edit->Account Settings to uncheck the "Compose messages in HTML format" setting in the "Composition & Addressing" panel of the account to be used to send the patch. [*2*] 3) In the main Thunderbird window, _before_ you open the compose window for the patch, use Tools->about:config to set the following to the indicated values: mailnews.send_plaintext_flowed => false mailnews.wraplength => 0 4) Open a compose window and click the external editor icon. 5) In the external editor window, read in the patch file and exit the editor normally. 6) Back in the compose window: Add whatever other text you wish to the message, complete the addressing and subject fields, and press send. 7) Optionally, undo the about:config/account settings changes made in steps 2 & 3. [Footnotes] *1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse 9.3 professional updates. *2* It may be possible to do this with about:config and the following settings but I haven't tried, yet. mail.html_compose => false mail.identity.default.compose_html => false mail.identity.id?.compose_html => false Gnus ---- '|' in the *Summary* buffer can be used to pipe the current message to an external program, and this is a handy way to drive "git am". However, if the message is MIME encoded, what is piped into the program is the representation you see in your *Article* buffer after unwrapping MIME. This is often not what you would want for two reasons. It tends to screw up non ASCII characters (most notably in people's names), and also whitespaces (fatal in patches). Running 'C-u g' to display the message in raw form before using '|' to run the pipe can work this problem around. KMail ----- This should help you to submit patches inline using KMail. 1) Prepare the patch as a text file. 2) Click on New Mail. 3) Go under "Options" in the Composer window and be sure that "Word wrap" is not set. 4) Use Message -> Insert file... and insert the patch. 5) Back in the compose window: add whatever other text you wish to the message, complete the addressing and subject fields, and press send.