core.worktree::
Set the path to the root of the working tree.
This can be overridden by the GIT_WORK_TREE environment
- variable and the '--work-tree' command line option.
+ variable and the '--work-tree' command-line option.
The value can be an absolute path or relative to the path to
the .git directory, which is either specified by --git-dir
or GIT_DIR, or automatically discovered.
to avoid unpacking and decompressing frequently used base
objects multiple times.
+
-Default is 16 MiB on all platforms. This should be reasonable
+Default is 96 MiB on all platforms. This should be reasonable
for all users/operating systems, except on the largest projects.
You probably do not need to adjust this value.
+
environment variable. If not set, fall back to the value of the
'SSH_ASKPASS' environment variable or, failing that, a simple password
prompt. The external program shall be given a suitable prompt as
- command line argument and write the password on its STDOUT.
+ command-line argument and write the password on its STDOUT.
core.attributesfile::
In addition to '.gitattributes' (per-directory) and
messages consider a line that begins with this character
commented, and removes them after the editor returns
(default '#').
++
+If set to "auto", `git-commit` would select a character that is not
+the beginning character of any line in existing commit messages.
sequence.editor::
Text editor used by `git rebase -i` for editing the rebase instruction file.
configuration, then `$PAGER`, and then the default chosen at
compile time (usually 'less').
+
-When the `LESS` environment variable is unset, Git sets it to `FRSX`
+When the `LESS` environment variable is unset, Git sets it to `FRX`
(if `LESS` environment variable is set, Git does not change it at
all). If you want to selectively override Git's default setting
-for `LESS`, you can set `core.pager` to e.g. `less -+S`. This will
+for `LESS`, you can set `core.pager` to e.g. `less -S`. This will
be passed to the shell by Git, which will translate the final
-command to `LESS=FRSX less -+S`. The environment tells the command
-to set the `S` option to chop long lines but the command line
-resets it to the default to fold long lines.
+command to `LESS=FRX less -S`. The environment does not set the
+`S` option but the command line does, instructing less to truncate
+long lines. Similarly, setting `core.pager` to `less -+F` will
+deactivate the `F` option specified by the environment from the
+command-line, deactivating the "quit if one screen" behavior of
+`less`. One can specifically activate some flags for particular
+commands: for example, setting `pager.blame` to `less -S` enables
+line truncation only for `git blame`.
+
Likewise, when the `LV` environment variable is unset, Git sets it
to `-c`. You can override this setting by exporting `LV` with
+
This can speed up operations like 'git diff' and 'git status' especially
on filesystems like NFS that have weak caching semantics and thus
-relatively high IO latencies. With this set to 'true', Git will do the
+relatively high IO latencies. When enabled, Git will do the
index comparison to the filesystem data in parallel, allowing
-overlapping IO's.
+overlapping IO's. Defaults to true.
core.createObject::
You can set this to 'link', in which case a hardlink followed by
confusion and troubles with script usage, aliases that
hide existing Git commands are ignored. Arguments are split by
spaces, the usual shell quoting and escaping is supported.
- quote pair and a backslash can be used to quote them.
+ A quote pair or a backslash can be used to quote them.
+
If the alias expansion is prefixed with an exclamation point,
it will be treated as a shell command. For example, defining
Set this variable to the empty string ("") to suppress
signature generation.
+format.signaturefile::
+ Works just like format.signature except the contents of the
+ file specified by this variable will be used as the signature.
+
format.suffix::
The default for format-patch is to output files with the suffix
`.patch`. Use this variable to change that suffix (make sure to
gpg.program::
Use this custom program instead of "gpg" found on $PATH when
making or verifying a PGP signature. The program must support the
- same command line interface as GPG, namely, to verify a detached
+ same command-line interface as GPG, namely, to verify a detached
signature, "gpg --verify $file - <$signature" is run, and the
program is expected to signal a good signature by exiting with
code 0, and to generate an ascii-armored detached signature, the
if the file has been updated, otherwise the user is prompted to
indicate the success of the merge.
+mergetool.meld.hasOutput::
+ Older versions of `meld` do not support the `--output` option.
+ Git will attempt to detect whether `meld` supports `--output`
+ by inspecting the output of `meld --help`. Configuring
+ `mergetool.meld.hasOutput` will make Git skip these checks and
+ use the configured value instead. Setting `mergetool.meld.hasOutput`
+ to `true` tells Git to unconditionally use the `--output` option,
+ and `false` avoids using `--output`.
+
mergetool.keepBackup::
After performing a merge, the original file with conflict markers
can be saved as a file with a `.orig` extension. If this variable
you are debugging pack bitmaps.
pack.writebitmaps::
- When true, git will write a bitmap index when packing all
- objects to disk (e.g., when `git repack -a` is run). This
- index can speed up the "counting objects" phase of subsequent
- packs created for clones and fetches, at the cost of some disk
- space and extra time spent on the initial repack. Defaults to
- false.
+ This is a deprecated synonym for `repack.writeBitmaps`.
pack.writeBitmapHashCache::
When true, git will include a "hash cache" section in the bitmap
`--pack-kept-objects` was passed. See linkgit:git-repack[1] for
details. Defaults to `false` normally, but `true` if a bitmap
index is being written (either via `--write-bitmap-index` or
- `pack.writeBitmaps`).
+ `repack.writeBitmaps`).
+
+repack.writeBitmaps::
+ When true, git will write a bitmap index when packing all
+ objects to disk (e.g., when `git repack -a` is run). This
+ index can speed up the "counting objects" phase of subsequent
+ packs created for clones and fetches, at the cost of some disk
+ space and extra time spent on the initial repack. Defaults to
+ false.
rerere.autoupdate::
When set to true, `git-rerere` updates the index with the
files which are not currently tracked by Git. Directories which
contain only untracked files, are shown with the directory name
only. Showing untracked files means that Git needs to lstat() all
- all the files in the whole repository, which might be slow on some
+ the files in the whole repository, which might be slow on some
systems. So, this variable controls how the commands displays
the untracked files. Possible values are:
+
exception to that rule is that status and commit will show staged
submodule changes. To
also view the summary for ignored submodules you can either use
- the --ignore-submodules=dirty command line option or the 'git
+ the --ignore-submodules=dirty command-line option or the 'git
submodule summary' command, which shows a similar output but does
not honor these settings.
submodule.<name>.fetchRecurseSubmodules::
This option can be used to control recursive fetching of this
submodule. It can be overridden by using the --[no-]recurse-submodules
- command line option to "git fetch" and "git pull".
+ command-line option to "git fetch" and "git pull".
This setting will override that from in the linkgit:gitmodules[5]
file.
"--ignore-submodules" option. The 'git submodule' commands are not
affected by this setting.
+tag.sort::
+ This variable controls the sort ordering of tags when displayed by
+ linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the
+ value of this variable will be used as the default.
+
tar.umask::
This variable can be used to restrict the permission bits of
tar archive entries. The default is 0002, which turns off the