and the porcelains. The variables are divided into sections, wherein
the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
-dot. The variable names are case-insensitive and only alphanumeric
-characters are allowed. Some variables may appear multiple times.
+dot. The variable names are case-insensitive, allow only alphanumeric
+characters and `-`, and must start with an alphabetic character. Some
+variables may appear multiple times.
Syntax
~~~~~~
header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
-The variable names are case-insensitive and only alphanumeric
-characters and `-` are allowed. There can be more than one value
-for a given variable; we say then that variable is multivalued.
+The variable names are case-insensitive, allow only alphanumeric characters
+and `-`, and must start with an alphabetic character. There can be more
+than one value for a given variable; we say then that the variable is
+multivalued.
Leading and trailing whitespace in a variable value is discarded.
Internal whitespace within a variable value is retained verbatim.
found at the location of the include directive. If the value of the
`include.path` variable is a relative path, the path is considered to be
relative to the configuration file in which the include directive was
-found. See below for examples.
+found. The value of `include.path` is subject to tilde expansion: `~/`
+is expanded to the value of `$HOME`, and `~user/` to the specified
+user's home directory. See below for examples.
Example
~~~~~~~
[include]
path = /path/to/foo.inc ; include by absolute path
path = foo ; expand "foo" relative to the current file
+ path = ~/foo ; expand "foo" in your $HOME directory
Variables
~~~~~~~~~
+
--
pushNonFastForward::
- Advice shown when linkgit:git-push[1] refuses
- non-fast-forward refs.
+ Set this variable to 'false' if you want to disable
+ 'pushNonFFCurrent', 'pushNonFFDefault', and
+ 'pushNonFFMatching' simultaneously.
+ pushNonFFCurrent::
+ Advice shown when linkgit:git-push[1] fails due to a
+ non-fast-forward update to the current branch.
+ pushNonFFDefault::
+ Advice to set 'push.default' to 'upstream' or 'current'
+ when you ran linkgit:git-push[1] and pushed 'matching
+ refs' by default (i.e. you did not provide an explicit
+ refspec, and no 'push.default' configuration was set)
+ and it resulted in a non-fast-forward error.
+ pushNonFFMatching::
+ Advice shown when you ran linkgit:git-push[1] and pushed
+ 'matching refs' explicitly (i.e. you used ':', or
+ specified a refspec that isn't your current branch) and
+ it resulted in a non-fast-forward error.
statusHints::
Directions on how to stage/unstage/add shown in the
output of linkgit:git-status[1] and the template shown
core.excludesfile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', git looks into this file for patterns
- of files which are not meant to be tracked. "{tilde}/" is expanded
- to the value of `$HOME` and "{tilde}user/" to the specified user's
+ of files which are not meant to be tracked. "`~/`" is expanded
+ to the value of `$HOME` and "`~user/`" to the specified user's
home directory. See linkgit:gitignore[5].
core.askpass::
fill rows before columns
`plain`;;
show in one column
+`dense`;;
+ make unequal size columns to utilize more space
+`nodense`;;
+ make equal size columns
--
+
This option defaults to 'never'.
+column.branch::
+ Specify whether to output branch listing in `git branch` in columns.
+ See `column.ui` for details.
+
+column.status::
+ Specify whether to output untracked files in `git status` in columns.
+ See `column.ui` for details.
+
+column.tag::
+ Specify whether to output tag listing in `git tag` in columns.
+ See `column.ui` for details.
+
commit.status::
A boolean to enable/disable inclusion of status information in the
commit message template when using an editor to prepare the commit
commit.template::
Specify a file to use as the template for new commit messages.
- "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
+ "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the
specified user's home directory.
credential.helper::
a boolean value, or `shallow` or `deep`. `shallow` threading
makes every mail a reply to the head of the series,
where the head is chosen from the cover letter, the
- `\--in-reply-to`, and the first patch mail, in this order.
+ `--in-reply-to`, and the first patch mail, in this order.
`deep` threading makes every mail a reply to the previous one.
A true boolean value is the same as `shallow`, and a false
value disables threading.
This is the default.
http.proxy::
- Override the HTTP proxy, normally configured using the 'http_proxy'
- environment variable (see linkgit:curl[1]). This can be overridden
- on a per-remote basis; see remote.<name>.proxy
+ Override the HTTP proxy, normally configured using the 'http_proxy',
+ 'https_proxy', and 'all_proxy' environment variables (see
+ `curl(1)`). This can be overridden on a per-remote basis; see
+ remote.<name>.proxy
http.cookiefile::
File containing previously stored cookie lines which should be used
interactive.singlekey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
- Currently this is used by the `\--patch` mode of
+ Currently this is used by the `--patch` mode of
linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
setting is silently ignored if portable keystroke input
log.abbrevCommit::
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
- linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may
- override this option with `\--no-abbrev-commit`.
+ linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
+ override this option with `--no-abbrev-commit`.
log.date::
Set the default date-time mode for the 'log' command.
Setting a value for log.date is similar to using 'git log''s
- `\--date` option. Possible values are `relative`, `local`,
+ `--date` option. Possible values are `relative`, `local`,
`default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]
for details.
and this config option ignored whenever the corresponding pack is
larger than 2 GB.
+
-If you have an old git that does not understand the version 2 `{asterisk}.idx` file,
+If you have an old git that does not understand the version 2 `*.idx` file,
cloning or fetching over a non native protocol (e.g. "http" and "rsync")
-that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the
+that will copy both `*.pack` file and corresponding `*.idx` file from the
other side may give you a repository that cannot be accessed with your
-older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however,
+older version of git. If the `*.pack` file is smaller than 2 GB, however,
you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
-the `{asterisk}.idx` file.
+the `*.idx` file.
pack.packSizeLimit::
The maximum size of a pack. This setting only affects
packing to a file when repacking, i.e. the git:// protocol
- is unaffected. It can be overridden by the `\--max-pack-size`
+ is unaffected. It can be overridden by the `--max-pack-size`
option of linkgit:git-repack[1]. The minimum size allowed is
limited to 1 MiB. The default is unlimited.
Common unit suffixes of 'k', 'm', or 'g' are
If the value is boolean, turns on or off pagination of the
output of a particular git subcommand when writing to a tty.
Otherwise, turns on pagination for the subcommand using the
- pager specified by the value of `pager.<cmd>`. If `\--paginate`
- or `\--no-pager` is specified on the command line, it takes
+ pager specified by the value of `pager.<cmd>`. If `--paginate`
+ or `--no-pager` is specified on the command line, it takes
precedence over this option. To disable pagination for all
commands, set `core.pager` or `GIT_PAGER` to `cat`.
Alias for a --pretty= format string, as specified in
linkgit:git-log[1]. Any aliases defined here can be used just
as the built-in pretty formats could. For example,
- running `git config pretty.changelog "format:{asterisk} %H %s"`
+ running `git config pretty.changelog "format:* %H %s"`
would cause the invocation `git log --pretty=changelog`
- to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`.
+ to be equivalent to running `git log "--pretty=format:* %H %s"`.
Note that an alias with the same name as a built-in format
will be silently ignored.
line. Possible values are:
+
* `nothing` - do not push anything.
-* `matching` - push all matching branches.
- All branches having the same name in both ends are considered to be
- matching. This is the default.
+* `matching` - push all branches having the same name in both ends.
+ This is for those who prepare all the branches into a publishable
+ shape and then push them out with a single command. It is not
+ appropriate for pushing into a repository shared by multiple users,
+ since locally stalled branches will attempt a non-fast forward push
+ if other users updated the branch.
+ +
+ This is currently the default, but Git 2.0 will change the default
+ to `simple`.
* `upstream` - push the current branch to its upstream branch.
-* `tracking` - deprecated synonym for `upstream`.
+ With this, `git push` will update the same remote ref as the one which
+ is merged by `git pull`, making `push` and `pull` symmetrical.
+ See "branch.<name>.merge" for how to configure the upstream branch.
+* `simple` - like `upstream`, but refuses to push if the upstream
+ branch's name is different from the local one. This is the safest
+ option and is well-suited for beginners. It will become the default
+ in Git 2.0.
* `current` - push the current branch to a branch of the same name.
+ +
+ The `simple`, `current` and `upstream` modes are for those who want to
+ push out a single branch after finishing work, even when the other
+ branches are not yet ready to be pushed out. If you are working with
+ other people to push into the same shared repository, you would want
+ to use one of these.
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
remote.<name>.mirror::
If true, pushing to this remote will automatically behave
- as if the `\--mirror` option was given on the command line.
+ as if the `--mirror` option was given on the command line.
remote.<name>.skipDefaultUpdate::
If true, this remote will be skipped by default when updating