and the porcelains. The variables are divided into sections, wherein
the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
-dot. The variable names are case-insensitive and only alphanumeric
-characters are allowed. Some variables may appear multiple times.
+dot. The variable names are case-insensitive, allow only alphanumeric
+characters and `-`, and must start with an alphabetic character. Some
+variables may appear multiple times.
Syntax
~~~~~~
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
-There is also a case insensitive alternative `[section.subsection]` syntax.
-In this syntax, subsection names follow the same restrictions as for section
-names.
+There is also a deprecated `[section.subsection]` syntax. With this
+syntax, the subsection name is converted to lower-case and is also
+compared case sensitively. These subsection names follow the same
+restrictions as section names.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
-The variable names are case-insensitive and only alphanumeric
-characters and `-` are allowed. There can be more than one value
-for a given variable; we say then that variable is multivalued.
+The variable names are case-insensitive, allow only alphanumeric characters
+and `-`, and must start with an alphabetic character. There can be more
+than one value for a given variable; we say then that the variable is
+multivalued.
Leading and trailing whitespace in a variable value is discarded.
Internal whitespace within a variable value is retained verbatim.
Some variables may require a special value format.
+Includes
+~~~~~~~~
+
+You can include one config file from another by setting the special
+`include.path` variable to the name of the file to be included. The
+included file is expanded immediately, as if its contents had been
+found at the location of the include directive. If the value of the
+`include.path` variable is a relative path, the path is considered to be
+relative to the configuration file in which the include directive was
+found. See below for examples.
+
Example
~~~~~~~
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
+ [include]
+ path = /path/to/foo.inc ; include by absolute path
+ path = foo ; expand "foo" relative to the current file
+
Variables
~~~~~~~~~
porcelain configuration variables in the respective porcelain documentation.
advice.*::
- When set to 'true', display the given optional help message.
- When set to 'false', do not display. The configuration variables
- are:
+ These variables control various optional help messages designed to
+ aid new users. All 'advice.*' variables default to 'true', and you
+ can tell Git that you do not need help by setting these to 'false':
+
--
pushNonFastForward::
- Advice shown when linkgit:git-push[1] refuses
- non-fast-forward refs. Default: true.
+ Set this variable to 'false' if you want to disable
+ 'pushNonFFCurrent', 'pushNonFFDefault', and
+ 'pushNonFFMatching' simultaneously.
+ pushNonFFCurrent::
+ Advice shown when linkgit:git-push[1] fails due to a
+ non-fast-forward update to the current branch.
+ pushNonFFDefault::
+ Advice to set 'push.default' to 'upstream' or 'current'
+ when you ran linkgit:git-push[1] and pushed 'matching
+ refs' by default (i.e. you did not provide an explicit
+ refspec, and no 'push.default' configuration was set)
+ and it resulted in a non-fast-forward error.
+ pushNonFFMatching::
+ Advice shown when you ran linkgit:git-push[1] and pushed
+ 'matching refs' explicitly (i.e. you used ':', or
+ specified a refspec that isn't your current branch) and
+ it resulted in a non-fast-forward error.
statusHints::
Directions on how to stage/unstage/add shown in the
output of linkgit:git-status[1] and the template shown
- when writing commit messages. Default: true.
+ when writing commit messages.
commitBeforeMerge::
Advice shown when linkgit:git-merge[1] refuses to
merge to avoid overwriting local changes.
- Default: true.
resolveConflict::
Advices shown by various commands when conflicts
prevent the operation from being performed.
- Default: true.
implicitIdentity::
Advice on how to set your identity configuration when
your information is guessed from the system username and
- domain name. Default: true.
-
+ domain name.
detachedHead::
- Advice shown when you used linkgit::git-checkout[1] to
+ Advice shown when you used linkgit:git-checkout[1] to
move to the detach HEAD state, to instruct how to create
- a local branch after the fact. Default: true.
+ a local branch after the fact.
--
core.fileMode::
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
+sequence.editor::
+ Text editor used by `git rebase -i` for editing the rebase insn file.
+ The value is meant to be interpreted by the shell when it is used.
+ It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
+ When not configured the default commit message editor is used instead.
+
core.pager::
The command that git will use to paginate output. Can
be overridden with the `GIT_PAGER` environment
branch.<name>.rebase::
When true, rebase the branch <name> on top of the fetched branch,
instead of merging the default branch from the default remote when
- "git pull" is run.
- *NOTE*: this is a possibly dangerous operation; do *not* use
- it unless you understand the implications (see linkgit:git-rebase[1]
- for details).
+ "git pull" is run. See "pull.rebase" for doing this in a non
+ branch-specific manner.
++
+*NOTE*: this is a possibly dangerous operation; do *not* use
+it unless you understand the implications (see linkgit:git-rebase[1]
+for details).
browser.<tool>.cmd::
Specify the command to invoke the specified browser. The
"{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
specified user's home directory.
+credential.helper::
+ Specify an external helper to be called when a username or
+ password credential is needed; the helper may consult external
+ storage to avoid prompting the user for the credentials. See
+ linkgit:gitcredentials[7] for details.
+
+credential.useHttpPath::
+ When acquiring credentials, consider the "path" component of an http
+ or https URL to be important. Defaults to false. See
+ linkgit:gitcredentials[7] for more information.
+
+credential.username::
+ If no username is set for a network authentication, use this username
+ by default. See credential.<context>.* below, and
+ linkgit:gitcredentials[7].
+
+credential.<url>.*::
+ Any of the credential.* options above can be applied selectively to
+ some credentials. For example "credential.https://example.com.username"
+ would set the default username only for https connections to
+ example.com. See linkgit:gitcredentials[7] for details on how URLs are
+ matched.
+
include::diff-config.txt[]
difftool.<tool>.path::
when its superproject retrieves a commit that updates the submodule's
reference.
+fetch.fsckObjects::
+ If it is set to true, git-fetch-pack will check all fetched
+ objects. It will abort in the case of a malformed object or a
+ broken link. The result of an abort are only dangling objects.
+ Defaults to false. If not set, the value of `transfer.fsckObjects`
+ is used instead.
+
fetch.unpackLimit::
If the number of objects fetched over the git native
transfer is below this
is one of "ext" and "pserver") to make them apply only for the given
access method.
+gitweb.category::
+gitweb.description::
+gitweb.owner::
+gitweb.url::
+ See linkgit:gitweb[1] for description.
+
+gitweb.avatar::
+gitweb.blame::
+gitweb.grep::
+gitweb.highlight::
+gitweb.patches::
+gitweb.pickaxe::
+gitweb.remote_heads::
+gitweb.showsizes::
+gitweb.snapshot::
+ See linkgit:gitweb.conf[5] for description.
+
grep.lineNumber::
If set to true, enable '-n' option by default.
grep.extendedRegexp::
If set to true, enable '--extended-regexp' option by default.
+gpg.program::
+ Use this custom program instead of "gpg" found on $PATH when
+ making or verifying a PGP signature. The program must support the
+ same command line interface as GPG, namely, to verify a detached
+ signature, "gpg --verify $file - <$signature" is run, and the
+ program is expected to signal a good signature by exiting with
+ code 0, and to generate an ascii-armored detached signature, the
+ standard input of "gpg -bsau $key" is fed with the contents to be
+ signed, and the program is expected to send the result to its
+ standard output.
+
gui.commitmsgwidth::
Defines how wide the commit message window is in the
linkgit:git-gui[1]. "75" is the default.
This is the default.
http.proxy::
- Override the HTTP proxy, normally configured using the 'http_proxy'
- environment variable (see linkgit:curl[1]). This can be overridden
- on a per-remote basis; see remote.<name>.proxy
+ Override the HTTP proxy, normally configured using the 'http_proxy',
+ 'https_proxy', and 'all_proxy' environment variables (see
+ `curl(1)`). This can be overridden on a per-remote basis; see
+ remote.<name>.proxy
http.cookiefile::
File containing previously stored cookie lines which should be used
Note that an alias with the same name as a built-in format
will be silently ignored.
+pull.rebase::
+ When true, rebase branches on top of the fetched branch, instead
+ of merging the default branch from the default remote when "git
+ pull" is run. See "branch.<name>.rebase" for setting this on a
+ per-branch basis.
++
+*NOTE*: this is a possibly dangerous operation; do *not* use
+it unless you understand the implications (see linkgit:git-rebase[1]
+for details).
+
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
- Defaults to false.
+ Defaults to false. If not set, the value of `transfer.fsckObjects`
+ is used instead.
receive.unpackLimit::
If the number of objects received in a push is below this
archiving user's umask will be used instead. See umask(2) and
linkgit:git-archive[1].
+transfer.fsckObjects::
+ When `fetch.fsckObjects` or `receive.fsckObjects` are
+ not set, the value of this variable is used instead.
+ Defaults to false.
+
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
not set, the value of this variable is used instead.