# The default target of this Makefile is...
-all:
+all::
-# Define MOZILLA_SHA1 environment variable when running make to make use of
-# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
-# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
-# choice) has very fast version optimized for i586.
-#
# Define NO_OPENSSL environment variable if you do not have OpenSSL.
# This also implies MOZILLA_SHA1.
#
# Define ARM_SHA1 environment variable when running make to make use of
# a bundled SHA1 routine optimized for ARM.
#
+# Define MOZILLA_SHA1 environment variable when running make to make use of
+# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
+# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
+# choice) has very fast version optimized for i586.
+#
# Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
#
# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
#
# Define NO_MMAP if you want to avoid mmap.
#
-# Define WITH_OWN_SUBPROCESS_PY if you want to use with python 2.3.
+# Define NO_PREAD if you have a problem with pread() system call (e.g.
+# cygwin.dll before v1.5.22).
+#
+# Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
+# generally faster on your platform than accessing the working directory.
+#
+# Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
+# the executable mode bit, but doesn't really do so.
#
# Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
#
#
# Define NO_ICONV if your libc does not properly support iconv.
#
-# Define NO_ACCURATE_DIFF if your diff program at least sometimes misses
-# a missing newline at the end of the file.
+# Define NO_R_TO_GCC if your gcc does not like "-R/path/lib" that
+# tells runtime paths to dynamic libraries; "-Wl,-rpath=/path/lib"
+# is used instead.
#
-# Define COLLISION_CHECK below if you believe that SHA1's
-# 1461501637330902918203684832716283019655932542976 hashes do not give you
-# sufficient guarantee that no collisions between objects will ever happen.
-
# Define USE_NSEC below if you want git to care about sub-second file mtimes
# and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
# it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
# randomly break unless your underlying filesystem supports those sub-second
# times (my ext3 doesn't).
-
+#
# Define USE_STDEV below if you want git to care about the underlying device
# change being considered an inode change from the update-cache perspective.
+#
+# Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
+# MakeMaker (e.g. using ActiveState under Cygwin).
+#
GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE
@$(SHELL_PATH) ./GIT-VERSION-GEN
bindir = $(prefix)/bin
gitexecdir = $(bindir)
template_dir = $(prefix)/share/git-core/templates/
-GIT_PYTHON_DIR = $(prefix)/share/git-core/python
# DESTDIR=
# default configuration for gitweb
GITWEB_CSS = gitweb.css
GITWEB_LOGO = git-logo.png
GITWEB_FAVICON = git-favicon.png
+GITWEB_SITE_HEADER =
+GITWEB_SITE_FOOTER =
-export prefix bindir gitexecdir template_dir GIT_PYTHON_DIR
+export prefix bindir gitexecdir template_dir
CC = gcc
AR = ar
### --- END CONFIGURATION SECTION ---
+# Those must not be GNU-specific; they are shared with perl/ which may
+# be built by a different compiler. (Note that this is an artifact now
+# but it still might be nice to keep that distinction.)
+BASIC_CFLAGS =
+BASIC_LDFLAGS =
+
SCRIPT_SH = \
- git-bisect.sh git-branch.sh git-checkout.sh \
- git-cherry.sh git-clean.sh git-clone.sh git-commit.sh \
- git-fetch.sh \
+ git-bisect.sh git-checkout.sh \
+ git-clean.sh git-clone.sh git-commit.sh \
+ git-fetch.sh git-gc.sh \
git-ls-remote.sh \
git-merge-one-file.sh git-parse-remote.sh \
git-pull.sh git-rebase.sh \
git-lost-found.sh git-quiltimport.sh
SCRIPT_PERL = \
+ git-add--interactive.perl \
git-archimport.perl git-cvsimport.perl git-relink.perl \
- git-shortlog.perl git-rerere.perl \
- git-annotate.perl git-cvsserver.perl \
+ git-cvsserver.perl git-remote.perl \
git-svnimport.perl git-cvsexportcommit.perl \
git-send-email.perl git-svn.perl
-SCRIPT_PYTHON = \
- git-merge-recursive-old.py
-
SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
$(patsubst %.perl,%,$(SCRIPT_PERL)) \
- $(patsubst %.py,%,$(SCRIPT_PYTHON)) \
git-cherry-pick git-status git-instaweb
-# The ones that do not have to link with lcrypto, lz nor xdiff.
-SIMPLE_PROGRAMS = \
- git-daemon$X
-
# ... and all the rest that could be moved out of bindir to gitexecdir
PROGRAMS = \
- git-convert-objects$X git-fetch-pack$X git-fsck-objects$X \
+ git-convert-objects$X git-fetch-pack$X git-fsck$X \
git-hash-object$X git-index-pack$X git-local-fetch$X \
+ git-fast-import$X \
git-merge-base$X \
+ git-daemon$X \
git-merge-index$X git-mktag$X git-mktree$X git-patch-id$X \
git-peek-remote$X git-receive-pack$X \
git-send-pack$X git-shell$X \
git-update-server-info$X \
git-upload-pack$X git-verify-pack$X \
git-pack-redundant$X git-var$X \
- git-describe$X git-merge-tree$X git-blame$X git-imap-send$X \
+ git-merge-tree$X git-imap-send$X \
git-merge-recursive$X \
$(EXTRA_PROGRAMS)
EXTRA_PROGRAMS =
BUILT_INS = \
- git-format-patch$X git-show$X git-whatchanged$X \
- git-get-tar-commit-id$X \
+ git-format-patch$X git-show$X git-whatchanged$X git-cherry$X \
+ git-get-tar-commit-id$X git-init$X git-repo-config$X \
+ git-fsck-objects$X \
$(patsubst builtin-%.o,git-%$X,$(BUILTIN_OBJS))
# what 'all' will build and 'install' will install, in gitexecdir
-ALL_PROGRAMS = $(PROGRAMS) $(SIMPLE_PROGRAMS) $(SCRIPTS)
+ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
# Backward compatibility -- to be removed after 1.0
PROGRAMS += git-ssh-pull$X git-ssh-push$X
ifndef PERL_PATH
PERL_PATH = /usr/bin/perl
endif
-ifndef PYTHON_PATH
- PYTHON_PATH = /usr/bin/python
-endif
-PYMODULES = \
- gitMergeCommon.py
+export PERL_PATH
LIB_FILE=libgit.a
XDIFF_LIB=xdiff/lib.a
archive.h blob.h cache.h commit.h csum-file.h delta.h grep.h \
diff.h object.h pack.h pkt-line.h quote.h refs.h list-objects.h sideband.h \
run-command.h strbuf.h tag.h tree.h git-compat-util.h revision.h \
- tree-walk.h log-tree.h dir.h path-list.h unpack-trees.h builtin.h
+ tree-walk.h log-tree.h dir.h path-list.h unpack-trees.h builtin.h \
+ utf8.h reflog-walk.h
DIFF_OBJS = \
diff.o diff-lib.o diffcore-break.o diffcore-order.o \
interpolate.o \
lockfile.o \
object.o pack-check.o patch-delta.o path.o pkt-line.o sideband.o \
+ reachable.o reflog-walk.o \
quote.o read-cache.o refs.o run-command.o dir.o object-refs.o \
server-info.o setup.o sha1_file.o sha1_name.o strbuf.o \
tag.o tree.o usage.o config.o environment.o ctype.o copy.o \
- fetch-clone.o revision.o pager.o tree-walk.o xdiff-interface.o \
+ revision.o pager.o tree-walk.o xdiff-interface.o \
write_or_die.o trace.o list-objects.o grep.o \
alloc.o merge-file.o path-list.o help.o unpack-trees.o $(DIFF_OBJS) \
- color.o wt-status.o archive-zip.o archive-tar.o
+ color.o wt-status.o archive-zip.o archive-tar.o shallow.o utf8.o
BUILTIN_OBJS = \
builtin-add.o \
+ builtin-annotate.o \
builtin-apply.o \
builtin-archive.o \
+ builtin-blame.o \
+ builtin-branch.o \
builtin-cat-file.o \
builtin-checkout-index.o \
builtin-check-ref-format.o \
builtin-commit-tree.o \
builtin-count-objects.o \
+ builtin-describe.o \
builtin-diff.o \
builtin-diff-files.o \
builtin-diff-index.o \
builtin-diff-tree.o \
builtin-fmt-merge-msg.o \
builtin-for-each-ref.o \
+ builtin-fsck.o \
builtin-grep.o \
builtin-init-db.o \
builtin-log.o \
builtin-ls-tree.o \
builtin-mailinfo.o \
builtin-mailsplit.o \
+ builtin-merge-file.o \
builtin-mv.o \
builtin-name-rev.o \
builtin-pack-objects.o \
builtin-prune-packed.o \
builtin-push.o \
builtin-read-tree.o \
- builtin-repo-config.o \
+ builtin-reflog.o \
+ builtin-config.o \
+ builtin-rerere.o \
builtin-rev-list.o \
builtin-rev-parse.o \
builtin-rm.o \
builtin-runstatus.o \
+ builtin-shortlog.o \
builtin-show-branch.o \
builtin-stripspace.o \
builtin-symbolic-ref.o \
builtin-pack-refs.o
GITLIBS = $(LIB_FILE) $(XDIFF_LIB)
-LIBS = $(GITLIBS) -lz
+EXTLIBS = -lz
#
# Platform specific tweaks
NEEDS_SSL_WITH_CRYPTO = YesPlease
NEEDS_LIBICONV = YesPlease
NO_STRLCPY = YesPlease
- ifndef NO_FINK
- ifeq ($(shell test -d /sw/lib && echo y),y)
- ALL_CFLAGS += -I/sw/include
- ALL_LDFLAGS += -L/sw/lib
- endif
- endif
- ifndef NO_DARWIN_PORTS
- ifeq ($(shell test -d /opt/local/lib && echo y),y)
- ALL_CFLAGS += -I/opt/local/include
- ALL_LDFLAGS += -L/opt/local/lib
- endif
- endif
endif
ifeq ($(uname_S),SunOS)
NEEDS_SOCKET = YesPlease
endif
INSTALL = ginstall
TAR = gtar
- ALL_CFLAGS += -D__EXTENSIONS__
+ BASIC_CFLAGS += -D__EXTENSIONS__
endif
ifeq ($(uname_O),Cygwin)
NO_D_TYPE_IN_DIRENT = YesPlease
NO_SYMLINK_HEAD = YesPlease
NEEDS_LIBICONV = YesPlease
NO_C99_FORMAT = YesPlease
+ NO_FAST_WORKING_DIRECTORY = UnfortunatelyYes
+ NO_TRUSTABLE_FILEMODE = UnfortunatelyYes
# There are conflicting reports about this.
# On some boxes NO_MMAP is needed, and not so elsewhere.
- # Try uncommenting this if you see things break -- YMMV.
- # NO_MMAP = YesPlease
+ # Try commenting this out if you suspect MMAP is more efficient
+ NO_MMAP = YesPlease
NO_IPV6 = YesPlease
X = .exe
endif
ifeq ($(uname_S),FreeBSD)
NEEDS_LIBICONV = YesPlease
- ALL_CFLAGS += -I/usr/local/include
- ALL_LDFLAGS += -L/usr/local/lib
+ BASIC_CFLAGS += -I/usr/local/include
+ BASIC_LDFLAGS += -L/usr/local/lib
endif
ifeq ($(uname_S),OpenBSD)
NO_STRCASESTR = YesPlease
NEEDS_LIBICONV = YesPlease
- ALL_CFLAGS += -I/usr/local/include
- ALL_LDFLAGS += -L/usr/local/lib
+ BASIC_CFLAGS += -I/usr/local/include
+ BASIC_LDFLAGS += -L/usr/local/lib
endif
ifeq ($(uname_S),NetBSD)
ifeq ($(shell expr "$(uname_R)" : '[01]\.'),2)
NEEDS_LIBICONV = YesPlease
endif
- ALL_CFLAGS += -I/usr/pkg/include
- ALL_LDFLAGS += -L/usr/pkg/lib -Wl,-rpath,/usr/pkg/lib
+ BASIC_CFLAGS += -I/usr/pkg/include
+ BASIC_LDFLAGS += -L/usr/pkg/lib
+ ALL_LDFLAGS += -Wl,-rpath,/usr/pkg/lib
endif
ifeq ($(uname_S),AIX)
NO_STRCASESTR=YesPlease
NO_STRLCPY = YesPlease
NO_SOCKADDR_STORAGE=YesPlease
SHELL_PATH=/usr/gnu/bin/bash
- ALL_CFLAGS += -DPATH_MAX=1024
+ BASIC_CFLAGS += -DPATH_MAX=1024
# for now, build 32-bit version
- ALL_LDFLAGS += -L/usr/lib32
+ BASIC_LDFLAGS += -L/usr/lib32
endif
ifneq (,$(findstring arm,$(uname_M)))
ARM_SHA1 = YesPlease
-include config.mak.autogen
-include config.mak
-ifdef WITH_OWN_SUBPROCESS_PY
- PYMODULES += compat/subprocess.py
-else
- ifeq ($(NO_PYTHON),)
- ifneq ($(shell $(PYTHON_PATH) -c 'import subprocess;print"OK"' 2>/dev/null),OK)
- PYMODULES += compat/subprocess.py
+ifeq ($(uname_S),Darwin)
+ ifndef NO_FINK
+ ifeq ($(shell test -d /sw/lib && echo y),y)
+ BASIC_CFLAGS += -I/sw/include
+ BASIC_LDFLAGS += -L/sw/lib
+ endif
+ endif
+ ifndef NO_DARWIN_PORTS
+ ifeq ($(shell test -d /opt/local/lib && echo y),y)
+ BASIC_CFLAGS += -I/opt/local/include
+ BASIC_LDFLAGS += -L/opt/local/lib
endif
endif
endif
+ifdef NO_R_TO_GCC_LINKER
+ # Some gcc does not accept and pass -R to the linker to specify
+ # the runtime dynamic library path.
+ CC_LD_DYNPATH = -Wl,-rpath=
+else
+ CC_LD_DYNPATH = -R
+endif
+
ifndef NO_CURL
ifdef CURLDIR
- # This is still problematic -- gcc does not always want -R.
- ALL_CFLAGS += -I$(CURLDIR)/include
- CURL_LIBCURL = -L$(CURLDIR)/lib -R$(CURLDIR)/lib -lcurl
+ # Try "-Wl,-rpath=$(CURLDIR)/lib" in such a case.
+ BASIC_CFLAGS += -I$(CURLDIR)/include
+ CURL_LIBCURL = -L$(CURLDIR)/lib $(CC_LD_DYNPATH)$(CURLDIR)/lib -lcurl
else
CURL_LIBCURL = -lcurl
endif
ifndef NO_OPENSSL
OPENSSL_LIBSSL = -lssl
ifdef OPENSSLDIR
- # Again this may be problematic -- gcc does not always want -R.
- ALL_CFLAGS += -I$(OPENSSLDIR)/include
- OPENSSL_LINK = -L$(OPENSSLDIR)/lib -R$(OPENSSLDIR)/lib
+ BASIC_CFLAGS += -I$(OPENSSLDIR)/include
+ OPENSSL_LINK = -L$(OPENSSLDIR)/lib $(CC_LD_DYNPATH)$(OPENSSLDIR)/lib
else
OPENSSL_LINK =
endif
else
- ALL_CFLAGS += -DNO_OPENSSL
+ BASIC_CFLAGS += -DNO_OPENSSL
MOZILLA_SHA1 = 1
OPENSSL_LIBSSL =
endif
endif
ifdef NEEDS_LIBICONV
ifdef ICONVDIR
- # Again this may be problematic -- gcc does not always want -R.
- ALL_CFLAGS += -I$(ICONVDIR)/include
- ICONV_LINK = -L$(ICONVDIR)/lib -R$(ICONVDIR)/lib
+ BASIC_CFLAGS += -I$(ICONVDIR)/include
+ ICONV_LINK = -L$(ICONVDIR)/lib $(CC_LD_DYNPATH)$(ICONVDIR)/lib
else
ICONV_LINK =
endif
- LIBS += $(ICONV_LINK) -liconv
+ EXTLIBS += $(ICONV_LINK) -liconv
endif
ifdef NEEDS_SOCKET
- LIBS += -lsocket
- SIMPLE_LIB += -lsocket
+ EXTLIBS += -lsocket
endif
ifdef NEEDS_NSL
- LIBS += -lnsl
- SIMPLE_LIB += -lnsl
+ EXTLIBS += -lnsl
endif
ifdef NO_D_TYPE_IN_DIRENT
- ALL_CFLAGS += -DNO_D_TYPE_IN_DIRENT
+ BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
endif
ifdef NO_D_INO_IN_DIRENT
- ALL_CFLAGS += -DNO_D_INO_IN_DIRENT
+ BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
endif
ifdef NO_C99_FORMAT
- ALL_CFLAGS += -DNO_C99_FORMAT
+ BASIC_CFLAGS += -DNO_C99_FORMAT
endif
ifdef NO_SYMLINK_HEAD
- ALL_CFLAGS += -DNO_SYMLINK_HEAD
+ BASIC_CFLAGS += -DNO_SYMLINK_HEAD
endif
ifdef NO_STRCASESTR
COMPAT_CFLAGS += -DNO_STRCASESTR
COMPAT_CFLAGS += -DNO_MMAP
COMPAT_OBJS += compat/mmap.o
endif
+ifdef NO_PREAD
+ COMPAT_CFLAGS += -DNO_PREAD
+ COMPAT_OBJS += compat/pread.o
+endif
+ifdef NO_FAST_WORKING_DIRECTORY
+ BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
+endif
+ifdef NO_TRUSTABLE_FILEMODE
+ BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
+endif
ifdef NO_IPV6
- ALL_CFLAGS += -DNO_IPV6
+ BASIC_CFLAGS += -DNO_IPV6
endif
ifdef NO_SOCKADDR_STORAGE
ifdef NO_IPV6
- ALL_CFLAGS += -Dsockaddr_storage=sockaddr_in
+ BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
else
- ALL_CFLAGS += -Dsockaddr_storage=sockaddr_in6
+ BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
endif
endif
ifdef NO_INET_NTOP
endif
ifdef NO_ICONV
- ALL_CFLAGS += -DNO_ICONV
+ BASIC_CFLAGS += -DNO_ICONV
endif
ifdef PPC_SHA1
LIB_OBJS += mozilla-sha1/sha1.o
else
SHA1_HEADER = <openssl/sha.h>
- LIBS += $(LIB_4_CRYPTO)
+ EXTLIBS += $(LIB_4_CRYPTO)
endif
endif
endif
-ifdef NO_ACCURATE_DIFF
- ALL_CFLAGS += -DNO_ACCURATE_DIFF
+ifdef NO_PERL_MAKEMAKER
+ export NO_PERL_MAKEMAKER
endif
# Shell quote (do not use $(call) to accommodate ancient setups);
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
-PYTHON_PATH_SQ = $(subst ','\'',$(PYTHON_PATH))
-GIT_PYTHON_DIR_SQ = $(subst ','\'',$(GIT_PYTHON_DIR))
-ALL_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' $(COMPAT_CFLAGS)
+LIBS = $(GITLIBS) $(EXTLIBS)
+
+BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' $(COMPAT_CFLAGS)
LIB_OBJS += $(COMPAT_OBJS)
-export prefix TAR INSTALL DESTDIR SHELL_PATH template_dir
+
+ALL_CFLAGS += $(BASIC_CFLAGS)
+ALL_LDFLAGS += $(BASIC_LDFLAGS)
+
+export prefix gitexecdir TAR INSTALL DESTDIR SHELL_PATH template_dir
+
+
### Build rules
-all: $(ALL_PROGRAMS) $(BUILT_INS) git$X gitk gitweb/gitweb.cgi \
- git-merge-recur$X
+all:: $(ALL_PROGRAMS) $(BUILT_INS) git$X gitk gitweb/gitweb.cgi
+ifneq (,$X)
+ $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) git$X)), rm -f '$p';)
+endif
-all:
+all::
+ $(MAKE) -C git-gui all
+ $(MAKE) -C perl PERL_PATH='$(PERL_PATH_SQ)' prefix='$(prefix_SQ)' all
$(MAKE) -C templates
strip: $(PROGRAMS) git$X
help.o: common-cmds.h
-git-merge-recur$X: git-merge-recursive$X
- rm -f $@ && ln git-merge-recursive$X $@
-
$(BUILT_INS): git$X
rm -f $@ && ln git$X $@
-e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
-e 's/@@NO_CURL@@/$(NO_CURL)/g' \
- -e 's/@@NO_PYTHON@@/$(NO_PYTHON)/g' \
$@.sh >$@+
chmod +x $@+
mv $@+ $@
-$(patsubst %.perl,%,$(SCRIPT_PERL)) : % : %.perl
- rm -f $@ $@+
- sed -e '1s|#!.*perl|#!$(PERL_PATH_SQ)|' \
- -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
- $@.perl >$@+
- chmod +x $@+
- mv $@+ $@
+$(patsubst %.perl,%,$(SCRIPT_PERL)): perl/perl.mak
+
+perl/perl.mak: GIT-CFLAGS
+ $(MAKE) -C perl PERL_PATH='$(PERL_PATH_SQ)' prefix='$(prefix_SQ)' $(@F)
-$(patsubst %.py,%,$(SCRIPT_PYTHON)) : % : %.py GIT-CFLAGS
+$(patsubst %.perl,%,$(SCRIPT_PERL)): % : %.perl
rm -f $@ $@+
- sed -e '1s|#!.*python|#!$(PYTHON_PATH_SQ)|' \
- -e 's|@@GIT_PYTHON_PATH@@|$(GIT_PYTHON_DIR_SQ)|g' \
+ INSTLIBDIR=`$(MAKE) -C perl -s --no-print-directory instlibdir` && \
+ sed -e '1{' \
+ -e ' s|#!.*perl|#!$(PERL_PATH_SQ)|' \
+ -e ' h' \
+ -e ' s=.*=use lib (split(/:/, $$ENV{GITPERLLIB} || "@@INSTLIBDIR@@"));=' \
+ -e ' H' \
+ -e ' x' \
+ -e '}' \
+ -e 's|@@INSTLIBDIR@@|'"$$INSTLIBDIR"'|g' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
- $@.py >$@+
+ $@.perl >$@+
chmod +x $@+
mv $@+ $@
-e 's|++GITWEB_CSS++|$(GITWEB_CSS)|g' \
-e 's|++GITWEB_LOGO++|$(GITWEB_LOGO)|g' \
-e 's|++GITWEB_FAVICON++|$(GITWEB_FAVICON)|g' \
+ -e 's|++GITWEB_SITE_HEADER++|$(GITWEB_SITE_HEADER)|g' \
+ -e 's|++GITWEB_SITE_FOOTER++|$(GITWEB_SITE_FOOTER)|g' \
$< >$@+
chmod +x $@+
mv $@+ $@
sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
-e 's/@@NO_CURL@@/$(NO_CURL)/g' \
- -e 's/@@NO_PYTHON@@/$(NO_PYTHON)/g' \
-e '/@@GITWEB_CGI@@/r gitweb/gitweb.cgi' \
-e '/@@GITWEB_CGI@@/d' \
-e '/@@GITWEB_CSS@@/r gitweb/gitweb.css' \
git$X git.spec \
$(patsubst %.sh,%,$(SCRIPT_SH)) \
$(patsubst %.perl,%,$(SCRIPT_PERL)) \
- $(patsubst %.py,%,$(SCRIPT_PYTHON)) \
: GIT-VERSION-FILE
%.o: %.c GIT-CFLAGS
git-%$X: %.o $(GITLIBS)
$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
-$(SIMPLE_PROGRAMS) : $(LIB_FILE)
-$(SIMPLE_PROGRAMS) : git-%$X : %.o
- $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
- $(LIB_FILE) $(SIMPLE_LIB)
-
ssh-pull.o: ssh-fetch.c
ssh-push.o: ssh-upload.c
git-local-fetch$X: fetch.o
$(LIB_FILE): $(LIB_OBJS)
rm -f $@ && $(AR) rcs $@ $(LIB_OBJS)
-XDIFF_OBJS=xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o
+XDIFF_OBJS=xdiff/xdiffi.o xdiff/xprepare.o xdiff/xutils.o xdiff/xemit.o \
+ xdiff/xmerge.o
+$(XDIFF_OBJS): xdiff/xinclude.h xdiff/xmacros.h xdiff/xdiff.h xdiff/xtypes.h \
+ xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h
$(XDIFF_LIB): $(XDIFF_OBJS)
rm -f $@ && $(AR) rcs $@ $(XDIFF_OBJS)
+perl/Makefile: perl/Git.pm perl/Makefile.PL GIT-CFLAGS
+ (cd perl && $(PERL_PATH) Makefile.PL \
+ PREFIX='$(prefix_SQ)')
+
doc:
$(MAKE) -C Documentation all
find . -name '*.[hcS]' -print | xargs ctags -a
### Detect prefix changes
-TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):$(GIT_PYTHON_DIR_SQ):\
+TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
$(bindir_SQ):$(gitexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
GIT-CFLAGS: .FORCE-GIT-CFLAGS
# However, the environment gets quite big, and some programs have problems
# with that.
-export NO_PYTHON
export NO_SVN_TESTS
test: all
test-date$X: test-date.c date.o ctype.o
$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) test-date.c date.o ctype.o
-test-delta$X: test-delta.c diff-delta.o patch-delta.o
- $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $^
+test-delta$X: test-delta.o diff-delta.o patch-delta.o $(GITLIBS)
+ $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
test-dump-cache-tree$X: dump-cache-tree.o $(GITLIBS)
$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
check-sha1:: test-sha1$X
./test-sha1.sh
-check:
+check: common-cmds.h
for i in *.c; do sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; done
$(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexecdir_SQ)'
$(INSTALL) git$X gitk '$(DESTDIR_SQ)$(bindir_SQ)'
$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
- $(INSTALL) -d -m755 '$(DESTDIR_SQ)$(GIT_PYTHON_DIR_SQ)'
- $(INSTALL) $(PYMODULES) '$(DESTDIR_SQ)$(GIT_PYTHON_DIR_SQ)'
+ $(MAKE) -C perl prefix='$(prefix_SQ)' install
+ $(MAKE) -C git-gui install
if test 'z$(bindir_SQ)' != 'z$(gitexecdir_SQ)'; \
then \
ln -f '$(DESTDIR_SQ)$(bindir_SQ)/git$X' \
'$(DESTDIR_SQ)$(gitexecdir_SQ)/git$X'; \
fi
$(foreach p,$(BUILT_INS), rm -f '$(DESTDIR_SQ)$(gitexecdir_SQ)/$p' && ln '$(DESTDIR_SQ)$(gitexecdir_SQ)/git$X' '$(DESTDIR_SQ)$(gitexecdir_SQ)/$p' ;)
+ifneq (,$X)
+ $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) git$X)), rm -f '$(DESTDIR_SQ)$(gitexecdir_SQ)/$p';)
+endif
install-doc:
$(MAKE) -C Documentation install
+quick-install-doc:
+ $(MAKE) -C Documentation quick-install
mv $@+ $@
GIT_TARNAME=git-$(GIT_VERSION)
-dist: git.spec git-tar-tree
- ./git-tar-tree HEAD^{tree} $(GIT_TARNAME) > $(GIT_TARNAME).tar
+dist: git.spec git-archive
+ ./git-archive --format=tar \
+ --prefix=$(GIT_TARNAME)/ HEAD^{tree} > $(GIT_TARNAME).tar
@mkdir -p $(GIT_TARNAME)
@cp git.spec $(GIT_TARNAME)
@echo $(GIT_VERSION) > $(GIT_TARNAME)/version
+ @$(MAKE) -C git-gui TARDIR=../$(GIT_TARNAME)/git-gui dist-version
$(TAR) rf $(GIT_TARNAME).tar \
- $(GIT_TARNAME)/git.spec $(GIT_TARNAME)/version
+ $(GIT_TARNAME)/git.spec \
+ $(GIT_TARNAME)/version \
+ $(GIT_TARNAME)/git-gui/version
@rm -rf $(GIT_TARNAME)
gzip -f -9 $(GIT_TARNAME).tar
rm -f $(htmldocs).tar.gz $(manpages).tar.gz
rm -f gitweb/gitweb.cgi
$(MAKE) -C Documentation/ clean
- $(MAKE) -C templates clean
+ $(MAKE) -C perl clean
+ $(MAKE) -C git-gui clean
+ $(MAKE) -C templates/ clean
$(MAKE) -C t/ clean
rm -f GIT-VERSION-FILE GIT-CFLAGS
do \
case "$$v" in \
git-merge-octopus | git-merge-ours | git-merge-recursive | \
- git-merge-resolve | git-merge-stupid | git-merge-recur | \
- git-merge-recursive-old | \
+ git-merge-resolve | git-merge-stupid | \
git-ssh-pull | git-ssh-push ) continue ;; \
esac ; \
test -f "Documentation/$$v.txt" || \
*) echo "no link: $$v";; \
esac ; \
done | sort
+
+### Make sure built-ins do not have dups and listed in git.c
+#
+check-builtins::
+ ./check-builtins.sh