1024", "by 1024x1024", etc.
color::
- The value for a variables that takes a color is a list of
- colors (at most two) and attributes (at most one), separated
- by spaces. The colors accepted are `normal`, `black`,
- `red`, `green`, `yellow`, `blue`, `magenta`, `cyan` and
- `white`; the attributes are `bold`, `dim`, `ul`, `blink` and
- `reverse`. The first color given is the foreground; the
- second is the background. The position of the attribute, if
- any, doesn't matter. Attributes may be turned off specifically
- by prefixing them with `no` (e.g., `noreverse`, `noul`, etc).
-+
-Colors (foreground and background) may also be given as numbers between
-0 and 255; these use ANSI 256-color mode (but note that not all
-terminals may support this). If your terminal supports it, you may also
-specify 24-bit RGB values as hex, like `#ff0ab3`.
-+
-The attributes are meant to be reset at the beginning of each item
-in the colored output, so setting color.decorate.branch to `black`
-will paint that branch name in a plain `black`, even if the previous
-thing on the same output line (e.g. opening parenthesis before the
-list of branch names in `log --decorate` output) is set to be
-painted with `bold` or some other attribute.
+ The value for a variable that takes a color is a list of
+ colors (at most two, one for foreground and one for background)
+ and attributes (as many as you want), separated by spaces.
++
+The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
+`blue`, `magenta`, `cyan` and `white`. The first color given is the
+foreground; the second is the background.
++
+Colors may also be given as numbers between 0 and 255; these use ANSI
+256-color mode (but note that not all terminals may support this). If
+your terminal supports it, you may also specify 24-bit RGB values as
+hex, like `#ff0ab3`.
++
+The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
+`italic`, and `strike` (for crossed-out or "strikethrough" letters).
+The position of any attributes with respect to the colors
+(before, after, or in between), doesn't matter. Specific attributes may
+be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
+`no-ul`, etc).
++
+For git's pre-defined color slots, the attributes are meant to be reset
+at the beginning of each item in the colored output. So setting
+`color.decorate.branch` to `black` will paint that branch name in a
+plain `black`, even if the previous thing on the same output line (e.g.
+opening parenthesis before the list of branch names in `log --decorate`
+output) is set to be painted with `bold` or some other attribute.
+However, custom log formats may do more complicated and layered
+coloring, and the negated forms may be useful there.
pathname::
A variable that takes a pathname value can be given a
This is useful for excluding servers inside a firewall from
proxy use, while defaulting to a common proxy for external domains.
+core.sshCommand::
+ If this variable is set, `git fetch` and `git push` will
+ use the specified command instead of `ssh` when they need to
+ connect to a remote system. The command is in the same form as
+ the `GIT_SSH_COMMAND` environment variable and is overridden
+ when the environment variable is set.
+
core.ignoreStat::
If true, Git will avoid using lstat() calls to detect if files have
changed by setting the "assume-unchanged" bit for those tracked files
A boolean to enable/disable color in the output of
linkgit:git-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
linkgit:git-log[1], and linkgit:git-show[1] will use color
for all patches. If it is set to `true` or `auto`, those
commands will only use color when output is to the terminal.
- Defaults to false.
+ If unset, then the value of `color.ui` is used (`auto` by
+ default).
+
This does not affect linkgit:git-format-patch[1] or the
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
color.grep::
When set to `always`, always highlight matches. When `false` (or
`never`), never. When set to `true` or `auto`, use color only
- when the output is written to the terminal. Defaults to `false`.
+ when the output is written to the terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.grep.<slot>::
Use customized color for grep colorization. `<slot>` specifies which
and displays (such as those used by "git-add --interactive" and
"git-clean --interactive"). When false (or `never`), never.
When set to `true` or `auto`, use colors only when the output is
- to the terminal. Defaults to false.
+ to the terminal. If unset, then the value of `color.ui` is
+ used (`auto` by default).
color.interactive.<slot>::
Use customized color for 'git add --interactive' and 'git clean
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.status.<slot>::
Use customized color for status colorization. `<slot>` is
difftool.prompt::
Prompt before each invocation of the diff tool.
+fastimport.unpackLimit::
+ If the number of objects imported by linkgit:git-fast-import[1]
+ is below this limit, then the objects will be unpacked into
+ loose object files. However if the number of imported objects
+ equals or exceeds this limit then the pack will be stored as a
+ pack. Storing the pack from a fast-import can make the import
+ operation complete faster, especially on slow filesystems. If
+ not set, the value of `transfer.unpackLimit` is used instead.
+
fetch.recurseSubmodules::
This option can be either set to a boolean value or to 'on-demand'.
Setting it to a boolean changes the behavior of fetch and pull to
If true, fetch will automatically behave as if the `--prune`
option was given on the command line. See also `remote.<name>.prune`.
+fetch.output::
+ Control how ref update status is printed. Valid values are
+ `full` and `compact`. Default value is `full`. See section
+ OUTPUT in linkgit:git-fetch[1] for detail.
+
format.attach::
Enable multipart/mixed attachments as the default for
'format-patch'. The value can also be a double quoted string
value as the boundary. See the --attach option in
linkgit:git-format-patch[1].
+format.from::
+ Provides the default value for the `--from` option to format-patch.
+ Accepts a boolean value, or a name and email address. If false,
+ format-patch defaults to `--no-from`, using commit authors directly in
+ the "From:" field of patch mails. If true, format-patch defaults to
+ `--from`, using your committer identity in the "From:" field of patch
+ mails and including a "From:" field in the body of the patch mail if
+ different. If set to a non-boolean value, format-patch uses that
+ value instead of your committer identity. Defaults to false.
+
format.numbered::
A boolean which can enable or disable sequence numbers in patch
subjects. It defaults to "auto" which enables it only if there
gc.aggressiveDepth::
The depth parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
- to 250.
+ to 50.
gc.aggressiveWindow::
The window size parameter used in the delta compression
receive.advertiseAtomic::
By default, git-receive-pack will advertise the atomic push
- capability to its clients. If you don't want to this capability
- to be advertised, set this variable to false.
+ capability to its clients. If you don't want to advertise this
+ capability, set this variable to false.
+
+receive.advertisePushOptions::
+ By default, git-receive-pack will advertise the push options
+ capability to its clients. If you don't want to advertise this
+ capability, set this variable to false.
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
can be safely ignored such as invalid committer email addresses.
Note: corrupt objects cannot be skipped with this setting.
+receive.keepAlive::
+ After receiving the pack from the client, `receive-pack` may
+ produce no output (if `--quiet` was specified) while processing
+ the pack, causing some networks to drop the TCP connection.
+ With this option set, if `receive-pack` does not transmit
+ any data in this phase for `receive.keepAlive` seconds, it will
+ send a short keepalive packet. The default is 5 seconds; set
+ to 0 to disable keepalives entirely.
+
receive.unpackLimit::
If the number of objects received in a push is below this
limit then the objects will be unpacked into loose object
`uploadpack.keepAlive` seconds. Setting this option to 0
disables keepalive packets entirely. The default is 5 seconds.
+uploadpack.packObjectsHook::
+ If this option is set, when `upload-pack` would run
+ `git pack-objects` to create a packfile for a client, it will
+ run this shell command instead. The `pack-objects` command and
+ arguments it _would_ have run (including the `git pack-objects`
+ at the beginning) are appended to the shell command. The stdin
+ and stdout of the hook are treated as if `pack-objects` itself
+ was run. I.e., `upload-pack` will feed input intended for
+ `pack-objects` to the hook, and expects a completed packfile on
+ stdout.
++
+Note that this configuration variable is ignored if it is seen in the
+repository-level config (this is a safety measure against fetching from
+untrusted repositories).
+
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a