use Term::ANSIColor;
use File::Temp qw/ tempdir tempfile /;
use File::Spec::Functions qw(catdir catfile);
-use Error qw(:try);
+use Git::LoadCPAN::Error qw(:try);
use Cwd qw(abs_path cwd);
use Git;
use Git::I18N;
+use Net::Domain ();
+use Net::SMTP ();
+use Git::LoadCPAN::Mail::Address;
Getopt::Long::Configure qw/ pass_through /;
--[no-]cc <str> * Email Cc:
--[no-]bcc <str> * Email Bcc:
--subject <str> * Email "Subject:"
+ --reply-to <str> * Email "Reply-To:"
--in-reply-to <str> * Email "In-Reply-To:"
--[no-]xmailer * Add "X-Mailer:" header (default).
--[no-]annotate * Review each patch that will be sent in an editor.
# Variables we fill in automatically, or via prompting:
my (@to,$no_to,@initial_to,@cc,$no_cc,@initial_cc,@bcclist,$no_bcc,@xh,
- $initial_in_reply_to,$initial_subject,@files,
+ $initial_in_reply_to,$reply_to,$initial_subject,@files,
$author,$sender,$smtp_authpass,$annotate,$use_xmailer,$compose,$time);
my $envelope_sender;
my (@suppress_cc);
my ($auto_8bit_encoding);
my ($compose_encoding);
-my ($target_xfer_encoding);
+my $target_xfer_encoding = 'auto';
my ($debug_net_smtp) = 0; # Net::SMTP, see send_message()
$rc = GetOptions(
"sender|from=s" => \$sender,
"in-reply-to=s" => \$initial_in_reply_to,
+ "reply-to=s" => \$reply_to,
"subject=s" => \$initial_subject,
"to=s" => \@initial_to,
"to-cmd=s" => \$to_cmd,
die __("Cannot run git format-patch from outside a repository\n")
if $format_patch and not $repo;
+die __("`batch-size` and `relogin` must be specified together " .
+ "(via command-line or configuration option)\n")
+ if defined $relogin_delay and not defined $batch_size;
+
# Now, let's fill any that aren't set in with defaults:
sub read_config {
($repocommitter) = Git::ident_person(@repo, 'committer');
sub parse_address_line {
- return Git::parse_mailboxes($_[0]);
+ return map { $_->format } Mail::Address->parse($_[0]);
}
sub split_addrs {
if ($validate) {
foreach my $f (@files) {
unless (-p $f) {
- my $error = validate_patch($f);
+ my $error = validate_patch($f, $target_xfer_encoding);
$error and die sprintf(__("fatal: %s: %s\nwarning: no patches were sent\n"),
$f, $error);
}
my $tpl_sender = $sender || $repoauthor || $repocommitter || '';
my $tpl_subject = $initial_subject || '';
my $tpl_in_reply_to = $initial_in_reply_to || '';
+ my $tpl_reply_to = $reply_to || '';
print $c <<EOT1, Git::prefix_lines("GIT: ", __ <<EOT2), <<EOT3;
From $tpl_sender # This line is ignored.
Clear the body content if you don't wish to send a summary.
EOT2
From: $tpl_sender
+Reply-To: $tpl_reply_to
Subject: $tpl_subject
In-Reply-To: $tpl_in_reply_to
if ($parsed_email{'In-Reply-To'}) {
$initial_in_reply_to = delete($parsed_email{'In-Reply-To'});
}
+ if ($parsed_email{'Reply-To'}) {
+ $reply_to = delete($parsed_email{'Reply-To'});
+ }
if ($parsed_email{'Subject'}) {
$initial_subject = delete($parsed_email{'Subject'});
print $c2 "Subject: " .
$initial_in_reply_to = "<$initial_in_reply_to>" if $initial_in_reply_to ne '';
}
+if (defined $reply_to) {
+ $reply_to =~ s/^\s+|\s+$//g;
+ ($reply_to) = expand_aliases($reply_to);
+ $reply_to = sanitize_address($reply_to);
+}
+
if (!defined $smtp_server) {
my @sendmail_paths = qw( /usr/sbin/sendmail /usr/lib/sendmail );
push @sendmail_paths, map {"$_/sendmail"} split /:/, $ENV{PATH};
sub maildomain_net {
my $maildomain;
- if (eval { require Net::Domain; 1 }) {
- my $domain = Net::Domain::domainname();
- $maildomain = $domain if valid_fqdn($domain);
- }
+ my $domain = Net::Domain::domainname();
+ $maildomain = $domain if valid_fqdn($domain);
return $maildomain;
}
sub maildomain_mta {
my $maildomain;
- if (eval { require Net::SMTP; 1 }) {
- for my $host (qw(mailhost localhost)) {
- my $smtp = Net::SMTP->new($host);
- if (defined $smtp) {
- my $domain = $smtp->domain;
- $smtp->quit;
+ for my $host (qw(mailhost localhost)) {
+ my $smtp = Net::SMTP->new($host);
+ if (defined $smtp) {
+ my $domain = $smtp->domain;
+ $smtp->quit;
- $maildomain = $domain if valid_fqdn($domain);
+ $maildomain = $domain if valid_fqdn($domain);
- last if $maildomain;
- }
+ last if $maildomain;
}
}
return File::Spec::Functions::file_name_is_absolute($path);
}
-# Returns 1 if the message was sent, and 0 otherwise.
-# In actuality, the whole program dies when there
-# is an error sending a message.
+# Prepares the email, then asks the user what to do.
+#
+# If the user chooses to send the email, it's sent and 1 is returned.
+# If the user chooses not to send the email, 0 is returned.
+# If the user decides they want to make further edits, -1 is returned and the
+# caller is expected to call send_message again after the edits are performed.
+#
+# If an error occurs sending the email, this just dies.
sub send_message {
my @recipients = unique_email_list(@to);
$header .= "In-Reply-To: $in_reply_to\n";
$header .= "References: $references\n";
}
+ if ($reply_to) {
+ $header .= "Reply-To: $reply_to\n";
+ }
if (@xh) {
$header .= join("\n", @xh) . "\n";
}
EOF
}
- # TRANSLATORS: Make sure to include [y] [n] [q] [a] in your
+ # TRANSLATORS: Make sure to include [y] [n] [e] [q] [a] in your
# translation. The program will only accept English input
# at this point.
- $_ = ask(__("Send this email? ([y]es|[n]o|[q]uit|[a]ll): "),
- valid_re => qr/^(?:yes|y|no|n|quit|q|all|a)/i,
+ $_ = ask(__("Send this email? ([y]es|[n]o|[e]dit|[q]uit|[a]ll): "),
+ valid_re => qr/^(?:yes|y|no|n|edit|e|quit|q|all|a)/i,
default => $ask_default);
die __("Send this email reply required") unless defined $_;
if (/^n/i) {
return 0;
+ } elsif (/^e/i) {
+ return -1;
} elsif (/^q/i) {
cleanup_compose_files();
exit(0);
SSL => 1);
}
}
- else {
+ elsif (!$smtp) {
$smtp_server_port ||= 25;
$smtp ||= Net::SMTP->new($smtp_server,
Hello => $smtp_domain,
$smtp->starttls(ssl_verify_params())
or die sprintf(__("STARTTLS failed! %s"), IO::Socket::SSL::errstr());
}
- $smtp_encryption = '';
# Send EHLO again to receive fresh
# supported commands
$smtp->hello($smtp_domain);
$subject = $initial_subject;
$message_num = 0;
-foreach my $t (@files) {
+# Prepares the email, prompts the user, sends it out
+# Returns 0 if an edit was done and the function should be called again, or 1
+# otherwise.
+sub process_file {
+ my ($t) = @_;
+
open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t);
my $author = undef;
elsif (/^Content-Transfer-Encoding: (.*)/i) {
$xfer_encoding = $1 if not defined $xfer_encoding;
}
+ elsif (/^In-Reply-To: (.*)/i) {
+ $in_reply_to = $1;
+ }
+ elsif (/^References: (.*)/i) {
+ $references = $1;
+ }
elsif (!/^Date:\s/i && /^[-A-Za-z]+:\s+\S/) {
push @xh, $_;
}
-
} else {
# In the traditional
# "send lots of email" format,
}
}
}
- if (defined $target_xfer_encoding) {
- $xfer_encoding = '8bit' if not defined $xfer_encoding;
- $message = apply_transfer_encoding(
- $message, $xfer_encoding, $target_xfer_encoding);
- $xfer_encoding = $target_xfer_encoding;
- }
- if (defined $xfer_encoding) {
- push @xh, "Content-Transfer-Encoding: $xfer_encoding";
- }
- if (defined $xfer_encoding or $has_content_type) {
- unshift @xh, 'MIME-Version: 1.0' unless $has_mime_version;
- }
+ $xfer_encoding = '8bit' if not defined $xfer_encoding;
+ ($message, $xfer_encoding) = apply_transfer_encoding(
+ $message, $xfer_encoding, $target_xfer_encoding);
+ push @xh, "Content-Transfer-Encoding: $xfer_encoding";
+ unshift @xh, 'MIME-Version: 1.0' unless $has_mime_version;
$needs_confirm = (
$confirm eq "always" or
}
my $message_was_sent = send_message();
+ if ($message_was_sent == -1) {
+ do_edit($t);
+ return 0;
+ }
# set up for the next message
if ($thread && $message_was_sent &&
undef $auth;
sleep($relogin_delay) if defined $relogin_delay;
}
+
+ return 1;
+}
+
+foreach my $t (@files) {
+ while (!process_file($t)) {
+ # user edited the file
+ }
}
# Execute a command (e.g. $to_cmd) to get a list of email addresses
$message = MIME::Base64::decode($message)
if ($from eq 'base64');
+ $to = ($message =~ /.{999,}/) ? 'quoted-printable' : '8bit'
+ if $to eq 'auto';
+
die __("cannot send message as 7bit")
if ($to eq '7bit' and $message =~ /[^[:ascii:]]/);
- return $message
+ return ($message, $to)
if ($to eq '7bit' or $to eq '8bit');
- return MIME::QuotedPrint::encode($message, "\n", 0)
+ return (MIME::QuotedPrint::encode($message, "\n", 0), $to)
if ($to eq 'quoted-printable');
- return MIME::Base64::encode($message, "\n")
+ return (MIME::Base64::encode($message, "\n"), $to)
if ($to eq 'base64');
die __("invalid transfer encoding");
}
}
sub validate_patch {
- my $fn = shift;
+ my ($fn, $xfer_encoding) = @_;
if ($repo) {
my $validate_hook = catfile(catdir($repo->repo_path(), 'hooks'),
return $hook_error if $hook_error;
}
- open(my $fh, '<', $fn)
- or die sprintf(__("unable to open %s: %s\n"), $fn, $!);
- while (my $line = <$fh>) {
- if (length($line) > 998) {
- return sprintf(__("%s: patch contains a line longer than 998 characters"), $.);
+ # Any long lines will be automatically fixed if we use a suitable transfer
+ # encoding.
+ unless ($xfer_encoding =~ /^(?:auto|quoted-printable|base64)$/) {
+ open(my $fh, '<', $fn)
+ or die sprintf(__("unable to open %s: %s\n"), $fn, $!);
+ while (my $line = <$fh>) {
+ if (length($line) > 998) {
+ return sprintf(__("%s: patch contains a line longer than 998 characters"), $.);
+ }
}
}
return;