# operation then the filter signals that it cannot or does not want
# to process the file and any file after that is processed with the
# same command.
+# (5) If data with a pathname that is a key in the DELAY hash is
+# requested (e.g. "test-delay10.a") then the filter responds with
+# a "delay" status and sets the "requested" field in the DELAY hash.
+# The filter will signal the availability of this object after
+# "count" (field in DELAY hash) "list_available_blobs" commands.
+# (6) If data with the pathname "missing-delay.a" is processed that the
+# filter will drop the path from the "list_available_blobs" response.
+# (7) If data with the pathname "invalid-delay.a" is processed that the
+# filter will add the path "unfiltered" which was not delayed before
+# to the "list_available_blobs" response.
#
use strict;
open my $debug, ">>", $log_file or die "cannot open log file: $!";
+my %DELAY = (
+ 'test-delay10.a' => { "requested" => 0, "count" => 1 },
+ 'test-delay11.a' => { "requested" => 0, "count" => 1 },
+ 'test-delay20.a' => { "requested" => 0, "count" => 2 },
+ 'test-delay10.b' => { "requested" => 0, "count" => 1 },
+ 'missing-delay.a' => { "requested" => 0, "count" => 1 },
+ 'invalid-delay.a' => { "requested" => 0, "count" => 1 },
+);
+
sub rot13 {
my $str = shift;
$str =~ y/A-Za-z/N-ZA-Mn-za-m/;
sub packet_txt_read {
my ( $res, $buf ) = packet_bin_read();
- unless ( $buf =~ s/\n$// ) {
+ unless ( $buf eq '' or $buf =~ s/\n$// ) {
die "A non-binary line MUST be terminated by an LF.";
}
return ( $res, $buf );
( packet_txt_read() eq ( 0, "capability=clean" ) ) || die "bad capability";
( packet_txt_read() eq ( 0, "capability=smudge" ) ) || die "bad capability";
+( packet_txt_read() eq ( 0, "capability=delay" ) ) || die "bad capability";
( packet_bin_read() eq ( 1, "" ) ) || die "bad capability end";
foreach (@capabilities) {
$debug->flush();
while (1) {
- my ($command) = packet_txt_read() =~ /^command=(.+)$/;
+ my ( $command ) = packet_txt_read() =~ /^command=(.+)$/;
print $debug "IN: $command";
$debug->flush();
- my ($pathname) = packet_txt_read() =~ /^pathname=(.+)$/;
- print $debug " $pathname";
- $debug->flush();
-
- if ( $pathname eq "" ) {
- die "bad pathname '$pathname'";
- }
+ if ( $command eq "list_available_blobs" ) {
+ # Flush
+ packet_bin_read();
- # Flush
- packet_bin_read();
-
- my $input = "";
- {
- binmode(STDIN);
- my $buffer;
- my $done = 0;
- while ( !$done ) {
- ( $done, $buffer ) = packet_bin_read();
- $input .= $buffer;
+ foreach my $pathname ( sort keys %DELAY ) {
+ if ( $DELAY{$pathname}{"requested"} >= 1 ) {
+ $DELAY{$pathname}{"count"} = $DELAY{$pathname}{"count"} - 1;
+ if ( $pathname eq "invalid-delay.a" ) {
+ # Send Git a pathname that was not delayed earlier
+ packet_txt_write("pathname=unfiltered");
+ }
+ if ( $pathname eq "missing-delay.a" ) {
+ # Do not signal Git that this file is available
+ } elsif ( $DELAY{$pathname}{"count"} == 0 ) {
+ print $debug " $pathname";
+ packet_txt_write("pathname=$pathname");
+ }
+ }
}
- print $debug " " . length($input) . " [OK] -- ";
- $debug->flush();
- }
-
- my $output;
- if ( $pathname eq "error.r" or $pathname eq "abort.r" ) {
- $output = "";
- }
- elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) {
- $output = rot13($input);
- }
- elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) {
- $output = rot13($input);
- }
- else {
- die "bad command '$command'";
- }
- if ( $pathname eq "error.r" ) {
- print $debug "[ERROR]\n";
- $debug->flush();
- packet_txt_write("status=error");
packet_flush();
- }
- elsif ( $pathname eq "abort.r" ) {
- print $debug "[ABORT]\n";
+
+ print $debug " [OK]\n";
$debug->flush();
- packet_txt_write("status=abort");
+ packet_txt_write("status=success");
packet_flush();
}
else {
- packet_txt_write("status=success");
- packet_flush();
+ my ( $pathname ) = packet_txt_read() =~ /^pathname=(.+)$/;
+ print $debug " $pathname";
+ $debug->flush();
+
+ if ( $pathname eq "" ) {
+ die "bad pathname '$pathname'";
+ }
+
+ # Read until flush
+ my ( $done, $buffer ) = packet_txt_read();
+ while ( $buffer ne '' ) {
+ if ( $buffer eq "can-delay=1" ) {
+ if ( exists $DELAY{$pathname} and $DELAY{$pathname}{"requested"} == 0 ) {
+ $DELAY{$pathname}{"requested"} = 1;
+ }
+ } else {
+ die "Unknown message '$buffer'";
+ }
- if ( $pathname eq "${command}-write-fail.r" ) {
- print $debug "[WRITE FAIL]\n";
+ ( $done, $buffer ) = packet_txt_read();
+ }
+
+ my $input = "";
+ {
+ binmode(STDIN);
+ my $buffer;
+ my $done = 0;
+ while ( !$done ) {
+ ( $done, $buffer ) = packet_bin_read();
+ $input .= $buffer;
+ }
+ print $debug " " . length($input) . " [OK] -- ";
$debug->flush();
- die "${command} write error";
}
- print $debug "OUT: " . length($output) . " ";
- $debug->flush();
+ my $output;
+ if ( exists $DELAY{$pathname} and exists $DELAY{$pathname}{"output"} ) {
+ $output = $DELAY{$pathname}{"output"}
+ }
+ elsif ( $pathname eq "error.r" or $pathname eq "abort.r" ) {
+ $output = "";
+ }
+ elsif ( $command eq "clean" and grep( /^clean$/, @capabilities ) ) {
+ $output = rot13($input);
+ }
+ elsif ( $command eq "smudge" and grep( /^smudge$/, @capabilities ) ) {
+ $output = rot13($input);
+ }
+ else {
+ die "bad command '$command'";
+ }
+
+ if ( $pathname eq "error.r" ) {
+ print $debug "[ERROR]\n";
+ $debug->flush();
+ packet_txt_write("status=error");
+ packet_flush();
+ }
+ elsif ( $pathname eq "abort.r" ) {
+ print $debug "[ABORT]\n";
+ $debug->flush();
+ packet_txt_write("status=abort");
+ packet_flush();
+ }
+ elsif ( $command eq "smudge" and
+ exists $DELAY{$pathname} and
+ $DELAY{$pathname}{"requested"} == 1
+ ) {
+ print $debug "[DELAYED]\n";
+ $debug->flush();
+ packet_txt_write("status=delayed");
+ packet_flush();
+ $DELAY{$pathname}{"requested"} = 2;
+ $DELAY{$pathname}{"output"} = $output;
+ }
+ else {
+ packet_txt_write("status=success");
+ packet_flush();
- while ( length($output) > 0 ) {
- my $packet = substr( $output, 0, $MAX_PACKET_CONTENT_SIZE );
- packet_bin_write($packet);
- # dots represent the number of packets
- print $debug ".";
- if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) {
- $output = substr( $output, $MAX_PACKET_CONTENT_SIZE );
+ if ( $pathname eq "${command}-write-fail.r" ) {
+ print $debug "[WRITE FAIL]\n";
+ $debug->flush();
+ die "${command} write error";
}
- else {
- $output = "";
+
+ print $debug "OUT: " . length($output) . " ";
+ $debug->flush();
+
+ while ( length($output) > 0 ) {
+ my $packet = substr( $output, 0, $MAX_PACKET_CONTENT_SIZE );
+ packet_bin_write($packet);
+ # dots represent the number of packets
+ print $debug ".";
+ if ( length($output) > $MAX_PACKET_CONTENT_SIZE ) {
+ $output = substr( $output, $MAX_PACKET_CONTENT_SIZE );
+ }
+ else {
+ $output = "";
+ }
}
+ packet_flush();
+ print $debug " [OK]\n";
+ $debug->flush();
+ packet_flush();
}
- packet_flush();
- print $debug " [OK]\n";
- $debug->flush();
- packet_flush();
}
}