'init'::
Creates an empty git repository with additional metadata
directories for git-svn. The Subversion URL must be specified
- as a command-line argument.
+ as a command-line argument. Optionally, the target directory
+ to operate on can be specified as a second argument. Normally
+ this command initializes the current directory.
'fetch'::
Note: You should never attempt to modify the remotes/git-svn
branch outside of git-svn. Instead, create a branch from
-remotes/git-svn and work on that branch. Use the 'commit'
+remotes/git-svn and work on that branch. Use the 'dcommit'
command (see below) to write git commits back to
remotes/git-svn.
manually joining branches on commit.
'dcommit'::
- Commit all diffs from the current HEAD directly to the SVN
+ Commit all diffs from a specified head directly to the SVN
repository, and then rebase or reset (depending on whether or
- not there is a diff between SVN and HEAD). It is recommended
+ not there is a diff between SVN and head). It is recommended
that you run git-svn fetch and rebase (not pull) your commits
against the latest changes in the SVN repository.
- This is advantageous over 'commit' (below) because it produces
+ An optional command-line argument may be specified as an
+ alternative to HEAD.
+ This is advantageous over 'set-tree' (below) because it produces
cleaner, more linear history.
-'commit'::
+'log'::
+ This should make it easy to look up svn log messages when svn
+ users refer to -r/--revision numbers.
+
+ The following features from `svn log' are supported:
+
+ --revision=<n>[:<n>] - is supported, non-numeric args are not:
+ HEAD, NEXT, BASE, PREV, etc ...
+ -v/--verbose - it's not completely compatible with
+ the --verbose output in svn log, but
+ reasonably close.
+ --limit=<n> - is NOT the same as --max-count,
+ doesn't count merged/excluded commits
+ --incremental - supported
+
+ New features:
+
+ --show-commit - shows the git commit sha1, as well
+ --oneline - our version of --pretty=oneline
+
+ Any other arguments are passed directly to `git log'
+
+'set-tree'::
+ You should consider using 'dcommit' instead of this command.
Commit specified commit or tree objects to SVN. This relies on
your imported fetch data being up-to-date. This makes
absolutely no attempts to do patching when committing to SVN, it
directories. The output is suitable for appending to
the $GIT_DIR/info/exclude file.
+'commit-diff'::
+ Commits the diff of two tree-ish arguments from the
+ command-line. This command is intended for interopability with
+ git-svnimport and does not rely on being inside an git-svn
+ init-ed repository. This command takes three arguments, (a) the
+ original tree to diff against, (b) the new tree result, (c) the
+ URL of the target Subversion repository. The final argument
+ (URL) may be omitted if you are working from a git-svn-aware
+ repository (that has been init-ed with git-svn).
+ The -r<revision> option is required for this.
+
+'graft-branches'::
+ This command attempts to detect merges/branches from already
+ imported history. Techniques used currently include regexes,
+ file copies, and tree-matches). This command generates (or
+ modifies) the $GIT_DIR/info/grafts file. This command is
+ considered experimental, and inherently flawed because
+ merge-tracking in SVN is inherently flawed and inconsistent
+ across different repositories.
+
+'multi-init'::
+ This command supports git-svnimport-like command-line syntax for
+ importing repositories that are layed out as recommended by the
+ SVN folks. This is a bit more tolerant than the git-svnimport
+ command-line syntax and doesn't require the user to figure out
+ where the repository URL ends and where the repository path
+ begins.
+
+'multi-fetch'::
+ This runs fetch on all known SVN branches we're tracking. This
+ will NOT discover new branches (unlike git-svnimport), so
+ multi-init will need to be re-run (it's idempotent).
+
--
OPTIONS
-------
--
+--shared::
+--template=<template_directory>::
+ Only used with the 'init' command.
+ These are passed directly to gitlink:git-init-db[1].
+
-r <ARG>::
--revision <ARG>::
-::
--stdin::
-Only used with the 'commit' command.
+Only used with the 'set-tree' command.
Read a list of commits from stdin and commit them in reverse
order. Only the leading sha1 is read from each line, so
--rmdir::
-Only used with the 'commit' command.
+Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands.
Remove directories from the SVN tree if there are no files left
behind. SVN can version empty directories, and they are not
-e::
--edit::
-Only used with the 'commit' command.
+Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands.
Edit the commit message before committing to SVN. This is off by
default for objects that are commits, and forced on when committing
-l<num>::
--find-copies-harder::
-Both of these are only used with the 'commit' command.
+Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands.
They are both passed directly to git-diff-tree see
gitlink:git-diff-tree[1] for more information.
appropriate entry. Re-running the previous git-svn command
after the authors-file is modified should continue operation.
-repo-config key: svn.authors-file
+repo-config key: svn.authorsfile
+
+-q::
+--quiet::
+ Make git-svn less verbose. This only affects git-svn if you
+ have the SVN::* libraries installed and are using them.
+
+--repack[=<n>]::
+--repack-flags=<flags>
+ These should help keep disk usage sane for large fetches
+ with many revisions.
+
+ --repack takes an optional argument for the number of revisions
+ to fetch before repacking. This defaults to repacking every
+ 1000 commits fetched if no argument is specified.
+
+ --repack-flags are passed directly to gitlink:git-repack[1].
+
+repo-config key: svn.repack
+repo-config key: svn.repackflags
-m::
--merge::
-b<refname>::
--branch <refname>::
-Used with 'fetch' or 'commit'.
+Used with 'fetch', 'dcommit' or 'set-tree'.
This can be used to join arbitrary git branches to remotes/git-svn
on new commits where the tree object is equivalent.
'<<tracking-multiple-repos,Tracking Multiple Repositories or Branches>>'
for more information on using GIT_SVN_ID.
+--follow-parent::
+ This is especially helpful when we're tracking a directory
+ that has been moved around within the repository, or if we
+ started tracking a branch and never tracked the trunk it was
+ descended from.
+
+ This relies on the SVN::* libraries to work.
+
+repo-config key: svn.followparent
+
+--no-metadata::
+ This gets rid of the git-svn-id: lines at the end of every commit.
+
+ With this, you lose the ability to use the rebuild command. If
+ you ever lose your .git/svn/git-svn/.rev_db file, you won't be
+ able to fetch again, either. This is fine for one-shot imports.
+
+ The 'git-svn log' command will not work on repositories using this,
+ either.
+
+repo-config key: svn.nometadata
+
--
COMPATIBILITY OPTIONS
--no-ignore-externals::
Only used with the 'fetch' and 'rebuild' command.
+This command has no effect when you are using the SVN::*
+libraries with git, svn:externals are always avoided.
+
By default, git-svn passes --ignore-externals to svn to avoid
fetching svn:external trees into git. Pass this flag to enable
externals tracking directly via git.
repo-config key: svn.noignoreexternals
+--ignore-nodate::
+Only used with the 'fetch' command.
+
+By default git-svn will crash if it tries to import a revision
+from SVN which has '(no date)' listed as the date of the revision.
+This is repository corruption on SVN's part, plain and simple.
+But sometimes you really need those revisions anyway.
+
+If supplied git-svn will convert '(no date)' entries to the UNIX
+epoch (midnight on Jan. 1, 1970). Yes, that's probably very wrong.
+SVN was very wrong.
+
--
Basic Examples
~~~~~~~~~~~~~~
-Tracking and contributing to an Subversion managed-project:
+Tracking and contributing to a Subversion-managed project:
------------------------------------------------------------------------
-# Initialize a tree (like git init-db):
+# Initialize a repo (like git init-db):
git-svn init http://svn.foo.org/project/trunk
# Fetch remote revisions:
git-svn fetch
# Create your own branch to hack on:
git checkout -b my-branch remotes/git-svn
-# Commit only the git commits you want to SVN:
- git-svn commit <tree-ish> [<tree-ish_2> ...]
-# Commit all the git commits from my-branch that don't exist in SVN:
- git-svn commit remotes/git-svn..my-branch
+# Do some work, and then commit your new changes to SVN, as well as
+# automatically updating your working HEAD:
+ git-svn dcommit
# Something is committed to SVN, rebase the latest into your branch:
git-svn fetch && git rebase remotes/git-svn
# Append svn:ignore settings to the default git exclude file:
---------------
Originally, git-svn recommended that the remotes/git-svn branch be
-pulled from. This is because the author favored 'git-svn commit B'
-to commit a single head rather than the 'git-svn commit A..B' notation
+pulled from. This is because the author favored 'git-svn set-tree B'
+to commit a single head rather than the 'git-svn set-tree A..B' notation
to commit multiple commits.
-If you use 'git-svn commit A..B' to commit several diffs and you do not
+If you use 'git-svn set-tree A..B' to commit several diffs and you do not
have the latest remotes/git-svn merged into my-branch, you should use
'git rebase' to update your work branch instead of 'git pull'. 'pull'
can cause non-linear history to be flattened when committing into SVN,
DESIGN PHILOSOPHY
-----------------
Merge tracking in Subversion is lacking and doing branched development
-with Subversion is cumbersome as a result. git-svn completely forgoes
-any automated merge/branch tracking on the Subversion side and leaves it
-entirely up to the user on the git side. It's simply not worth it to do
-a useful translation when the original signal is weak.
+with Subversion is cumbersome as a result. git-svn does not do
+automated merge/branch tracking by default and leaves it entirely up to
+the user on the git side.
[[tracking-multiple-repos]]
TRACKING MULTIPLE REPOSITORIES OR BRANCHES
------------------------------------------
-This is for advanced users, most users should ignore this section.
-
Because git-svn does not care about relationships between different
branches or directories in a Subversion repository, git-svn has a simple
hack to allow it to track an arbitrary number of related _or_ unrelated
-SVN repositories via one git repository. Simply set the GIT_SVN_ID
-environment variable to a name other other than "git-svn" (the default)
-and git-svn will ignore the contents of the $GIT_DIR/git-svn directory
-and instead do all of its work in $GIT_DIR/$GIT_SVN_ID for that
-invocation. The interface branch will be remotes/$GIT_SVN_ID, instead of
-remotes/git-svn. Any remotes/$GIT_SVN_ID branch should never be modified
-by the user outside of git-svn commands.
+SVN repositories via one git repository. Simply use the --id/-i flag or
+set the GIT_SVN_ID environment variable to a name other other than
+"git-svn" (the default) and git-svn will ignore the contents of the
+$GIT_DIR/svn/git-svn directory and instead do all of its work in
+$GIT_DIR/svn/$GIT_SVN_ID for that invocation. The interface branch will
+be remotes/$GIT_SVN_ID, instead of remotes/git-svn. Any
+remotes/$GIT_SVN_ID branch should never be modified by the user outside
+of git-svn commands.
[[fetch-args]]
ADDITIONAL FETCH ARGUMENTS
Advanced Example: Tracking a Reorganized Repository
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Note: this example is now obsolete if you have SVN::* libraries
+installed. Simply use --follow-parent when fetching.
+
If you're tracking a directory that has moved, or otherwise been
branched or tagged off of another directory in the repository and you
care about the full history of the project, then you can read this
BUGS
----
-If somebody commits a conflicting changeset to SVN at a bad moment
-(right before you commit) causing a conflict and your commit to fail,
-your svn working tree ($GIT_DIR/git-svn/tree) may be dirtied. The
-easiest thing to do is probably just to rm -rf $GIT_DIR/git-svn/tree and
-run 'rebuild'.
+
+If you are not using the SVN::* Perl libraries and somebody commits a
+conflicting changeset to SVN at a bad moment (right before you commit)
+causing a conflict and your commit to fail, your svn working tree
+($GIT_DIR/git-svn/tree) may be dirtied. The easiest thing to do is
+probably just to rm -rf $GIT_DIR/git-svn/tree and run 'rebuild'. You
+can avoid this problem entirely by using 'dcommit'.
We ignore all SVN properties except svn:executable. Too difficult to
map them since we rely heavily on git write-tree being _exactly_ the
same on both the SVN and git working trees and I prefer not to clutter
working trees with metadata files.
-svn:keywords can't be ignored in Subversion (at least I don't know of
-a way to ignore them).
-
Renamed and copied directories are not detected by git and hence not
tracked when committing to SVN. I do not plan on adding support for
this as it's quite difficult and time-consuming to get working for all