-Commit Formatting
-~~~~~~~~~~~~~~~~~
-
-ifdef::git-rev-list[]
-Using these options, linkgit:git-rev-list[1] will act similar to the
-more specialized family of commit log tools: linkgit:git-log[1],
-linkgit:git-show[1], and linkgit:git-whatchanged[1]
-endif::git-rev-list[]
-
-include::pretty-options.txt[]
-
---relative-date::
-
- Synonym for `--date=relative`.
-
---date={relative,local,default,iso,rfc,short,raw}::
-
- Only takes effect for dates shown in human-readable format, such
- as when using "--pretty". `log.date` config variable sets a default
- value for log command's --date option.
-+
-`--date=relative` shows dates relative to the current time,
-e.g. "2 hours ago".
-+
-`--date=local` shows timestamps in user's local timezone.
-+
-`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format.
-+
-`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822
-format, often found in E-mail messages.
-+
-`--date=short` shows only date but not time, in `YYYY-MM-DD` format.
-+
-`--date=raw` shows the date in the internal raw git format `%s %z` format.
-+
-`--date=default` shows timestamps in the original timezone
-(either committer's or author's).
-
-ifdef::git-rev-list[]
---header::
-
- Print the contents of the commit in raw-format; each record is
- separated with a NUL character.
-endif::git-rev-list[]
-
---parents::
-
- Print the parents of the commit. Also enables parent
- rewriting, see 'History Simplification' below.
-
---children::
-
- Print the children of the commit. Also enables parent
- rewriting, see 'History Simplification' below.
-
-ifdef::git-rev-list[]
---timestamp::
- Print the raw commit timestamp.
-endif::git-rev-list[]
-
---left-right::
-
- Mark which side of a symmetric diff a commit is reachable from.
- Commits from the left side are prefixed with `<` and those from
- the right with `>`. If combined with `--boundary`, those
- commits are prefixed with `-`.
-+
-For example, if you have this topology:
-+
------------------------------------------------------------------------
- y---b---b branch B
- / \ /
- / .
- / / \
- o---x---a---a branch A
------------------------------------------------------------------------
-+
-you would get an output like this:
-+
------------------------------------------------------------------------
- $ git rev-list --left-right --boundary --pretty=oneline A...B
-
- >bbbbbbb... 3rd on b
- >bbbbbbb... 2nd on b
- <aaaaaaa... 3rd on a
- <aaaaaaa... 2nd on a
- -yyyyyyy... 1st on b
- -xxxxxxx... 1st on a
------------------------------------------------------------------------
-
---graph::
-
- Draw a text-based graphical representation of the commit history
- on the left hand side of the output. This may cause extra lines
- to be printed in between commits, in order for the graph history
- to be drawn properly.
-+
-This implies the '--topo-order' option by default, but the
-'--date-order' option may also be specified.
-
-ifndef::git-rev-list[]
-Diff Formatting
-~~~~~~~~~~~~~~~
-
-Below are listed options that control the formatting of diff output.
-Some of them are specific to linkgit:git-rev-list[1], however other diff
-options may be given. See linkgit:git-diff-files[1] for more options.
-
--c::
-
- With this option, diff output for a merge commit
- shows the differences from each of the parents to the merge result
- simultaneously instead of showing pairwise diff between a parent
- and the result one at a time. Furthermore, it lists only files
- which were modified from all parents.
-
---cc::
-
- This flag implies the '-c' options and further compresses the
- patch output by omitting uninteresting hunks whose contents in
- the parents have only two variants and the merge result picks
- one of them without modification.
-
--m::
-
- This flag makes the merge commits show the full diff like
- regular commits; for each merge parent, a separate log entry
- and diff is generated. An exception is that only diff against
- the first parent is shown when '--first-parent' option is given;
- in that case, the output represents the changes the merge
- brought _into_ the then-current branch.
-
--r::
-
- Show recursive diffs.
-
--t::
-
- Show the tree objects in the diff output. This implies '-r'.
-endif::git-rev-list[]
-
Commit Limiting
~~~~~~~~~~~~~~~
Besides specifying a range of commits that should be listed using the
special notations explained in the description, additional commit
-limiting may be applied.
+limiting may be applied. Note that they are applied before commit
+ordering and formatting options, such as '--reverse'.
--
-n 'number'::
--max-count=<number>::
- Limit the number of commits output.
+ Limit the number of commits to output.
--skip=<number>::
Pretend as if all the refs in `refs/` are listed on the
command line as '<commit>'.
---branches[=pattern]::
+--branches[=<pattern>]::
Pretend as if all the refs in `refs/heads` are listed
- on the command line as '<commit>'. If `pattern` is given, limit
+ on the command line as '<commit>'. If '<pattern>' is given, limit
branches to ones matching given shell glob. If pattern lacks '?',
'*', or '[', '/*' at the end is implied.
---tags[=pattern]::
+--tags[=<pattern>]::
Pretend as if all the refs in `refs/tags` are listed
- on the command line as '<commit>'. If `pattern` is given, limit
+ on the command line as '<commit>'. If '<pattern>' is given, limit
tags to ones matching given shell glob. If pattern lacks '?', '*',
or '[', '/*' at the end is implied.
---remotes[=pattern]::
+--remotes[=<pattern>]::
Pretend as if all the refs in `refs/remotes` are listed
- on the command line as '<commit>'. If `pattern`is given, limit
- remote tracking branches to ones matching given shell glob.
+ on the command line as '<commit>'. If '<pattern>' is given, limit
+ remote-tracking branches to ones matching given shell glob.
If pattern lacks '?', '*', or '[', '/*' at the end is implied.
---glob=glob-pattern::
- Pretend as if all the refs matching shell glob `glob-pattern`
+--glob=<glob-pattern>::
+ Pretend as if all the refs matching shell glob '<glob-pattern>'
are listed on the command line as '<commit>'. Leading 'refs/',
is automatically prepended if missing. If pattern lacks '?', '*',
or '[', '/*' at the end is implied.
reflog entries from the most recent one to older ones.
When this option is used you cannot specify commits to
exclude (that is, '{caret}commit', 'commit1..commit2',
- nor 'commit1...commit2' notations cannot be used).
+ nor 'commit1\...commit2' notations cannot be used).
+
With '\--pretty' format other than oneline (for obvious reasons),
this causes the output to have two extra lines of information
merges from the resulting history, as there are no selected
commits contributing to this merge.
+--ancestry-path::
+
+ When given a range of commits to display (e.g. 'commit1..commit2'
+ or 'commit2 {caret}commit1'), only display commits that exist
+ directly on the ancestry chain between the 'commit1' and
+ 'commit2', i.e. commits that are both descendants of 'commit1',
+ and ancestors of 'commit2'.
+
A more detailed explanation follows.
Suppose you specified `foo` as the <paths>. We shall call commits
+
-----------------------------------------------------------------------
.-A---N---O
- / /
+ / / /
I---------D
-----------------------------------------------------------------------
+
one of the parents is TREESAME, we follow only that one, so the other
sides of the merge are never walked.
-Finally, there is a fourth simplification mode available:
-
--simplify-merges::
First, build a history graph in the same way that
removed completely, because it had one parent and is TREESAME.
--
+Finally, there is a fifth simplification mode available:
+
+--ancestry-path::
+
+ Limit the displayed commits to those directly on the ancestry
+ chain between the "from" and "to" commits in the given commit
+ range. I.e. only display commits that are ancestor of the "to"
+ commit, and descendants of the "from" commit.
++
+As an example use case, consider the following commit history:
++
+-----------------------------------------------------------------------
+ D---E-------F
+ / \ \
+ B---C---G---H---I---J
+ / \
+ A-------K---------------L--M
+-----------------------------------------------------------------------
++
+A regular 'D..M' computes the set of commits that are ancestors of `M`,
+but excludes the ones that are ancestors of `D`. This is useful to see
+what happened to the history leading to `M` since `D`, in the sense
+that "what does `M` have that did not exist in `D`". The result in this
+example would be all the commits, except `A` and `B` (and `D` itself,
+of course).
++
+When we want to find out what commits in `M` are contaminated with the
+bug introduced by `D` and need fixing, however, we might want to view
+only the subset of 'D..M' that are actually descendants of `D`, i.e.
+excluding `C` and `K`. This is exactly what the '\--ancestry-path'
+option does. Applied to the 'D..M' range, it results in:
++
+-----------------------------------------------------------------------
+ E-------F
+ \ \
+ G---H---I---J
+ \
+ L--M
+-----------------------------------------------------------------------
+
The '\--simplify-by-decoration' option allows you to view only the
big picture of the topology of the history, by omitting commits
that are not referenced by tags. Commits are marked as !TREESAME
--do-walk::
Overrides a previous --no-walk.
+
+Commit Formatting
+~~~~~~~~~~~~~~~~~
+
+ifdef::git-rev-list[]
+Using these options, linkgit:git-rev-list[1] will act similar to the
+more specialized family of commit log tools: linkgit:git-log[1],
+linkgit:git-show[1], and linkgit:git-whatchanged[1]
+endif::git-rev-list[]
+
+include::pretty-options.txt[]
+
+--relative-date::
+
+ Synonym for `--date=relative`.
+
+--date=(relative|local|default|iso|rfc|short|raw)::
+
+ Only takes effect for dates shown in human-readable format, such
+ as when using "--pretty". `log.date` config variable sets a default
+ value for log command's --date option.
++
+`--date=relative` shows dates relative to the current time,
+e.g. "2 hours ago".
++
+`--date=local` shows timestamps in user's local timezone.
++
+`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format.
++
+`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822
+format, often found in E-mail messages.
++
+`--date=short` shows only date but not time, in `YYYY-MM-DD` format.
++
+`--date=raw` shows the date in the internal raw git format `%s %z` format.
++
+`--date=default` shows timestamps in the original timezone
+(either committer's or author's).
+
+ifdef::git-rev-list[]
+--header::
+
+ Print the contents of the commit in raw-format; each record is
+ separated with a NUL character.
+endif::git-rev-list[]
+
+--parents::
+
+ Print also the parents of the commit (in the form "commit parent...").
+ Also enables parent rewriting, see 'History Simplification' below.
+
+--children::
+
+ Print also the children of the commit (in the form "commit child...").
+ Also enables parent rewriting, see 'History Simplification' below.
+
+ifdef::git-rev-list[]
+--timestamp::
+ Print the raw commit timestamp.
+endif::git-rev-list[]
+
+--left-right::
+
+ Mark which side of a symmetric diff a commit is reachable from.
+ Commits from the left side are prefixed with `<` and those from
+ the right with `>`. If combined with `--boundary`, those
+ commits are prefixed with `-`.
++
+For example, if you have this topology:
++
+-----------------------------------------------------------------------
+ y---b---b branch B
+ / \ /
+ / .
+ / / \
+ o---x---a---a branch A
+-----------------------------------------------------------------------
++
+you would get an output like this:
++
+-----------------------------------------------------------------------
+ $ git rev-list --left-right --boundary --pretty=oneline A...B
+
+ >bbbbbbb... 3rd on b
+ >bbbbbbb... 2nd on b
+ <aaaaaaa... 3rd on a
+ <aaaaaaa... 2nd on a
+ -yyyyyyy... 1st on b
+ -xxxxxxx... 1st on a
+-----------------------------------------------------------------------
+
+--graph::
+
+ Draw a text-based graphical representation of the commit history
+ on the left hand side of the output. This may cause extra lines
+ to be printed in between commits, in order for the graph history
+ to be drawn properly.
++
+This enables parent rewriting, see 'History Simplification' below.
++
+This implies the '--topo-order' option by default, but the
+'--date-order' option may also be specified.
+
+ifdef::git-rev-list[]
+--count::
+ Print a number stating how many commits would have been
+ listed, and suppress all other output. When used together
+ with '--left-right', instead print the counts for left and
+ right commits, separated by a tab.
+endif::git-rev-list[]
+
+
+ifndef::git-rev-list[]
+Diff Formatting
+~~~~~~~~~~~~~~~
+
+Below are listed options that control the formatting of diff output.
+Some of them are specific to linkgit:git-rev-list[1], however other diff
+options may be given. See linkgit:git-diff-files[1] for more options.
+
+-c::
+
+ With this option, diff output for a merge commit
+ shows the differences from each of the parents to the merge result
+ simultaneously instead of showing pairwise diff between a parent
+ and the result one at a time. Furthermore, it lists only files
+ which were modified from all parents.
+
+--cc::
+
+ This flag implies the '-c' options and further compresses the
+ patch output by omitting uninteresting hunks whose contents in
+ the parents have only two variants and the merge result picks
+ one of them without modification.
+
+-m::
+
+ This flag makes the merge commits show the full diff like
+ regular commits; for each merge parent, a separate log entry
+ and diff is generated. An exception is that only diff against
+ the first parent is shown when '--first-parent' option is given;
+ in that case, the output represents the changes the merge
+ brought _into_ the then-current branch.
+
+-r::
+
+ Show recursive diffs.
+
+-t::
+
+ Show the tree objects in the diff output. This implies '-r'.
+
+-s::
+ Suppress diff output.
+endif::git-rev-list[]