use Data::Dumper;
use File::Basename qw(basename dirname);
use File::Spec;
+use Git;
-our ($opt_h, $opt_P, $opt_p, $opt_v, $opt_c, $opt_f, $opt_a, $opt_m, $opt_d, $opt_u, $opt_w);
+our ($opt_h, $opt_P, $opt_p, $opt_v, $opt_c, $opt_f, $opt_a, $opt_m, $opt_d, $opt_u, $opt_w, $opt_W, $opt_k);
-getopts('uhPpvcfam:d:w:');
+getopts('uhPpvcfkam:d:w:W');
$opt_h && usage();
die "Need at least one commit identifier!" unless @ARGV;
-if ($opt_w) {
+# Get git-config settings
+my $repo = Git->repository();
+$opt_w = $repo->config('cvsexportcommit.cvsdir') unless defined $opt_w;
+
+if ($opt_w || $opt_W) {
# Remember where GIT_DIR is before changing to CVS checkout
unless ($ENV{GIT_DIR}) {
# No GIT_DIR set. Figure it out for ourselves
}
# Make sure GIT_DIR is absolute
$ENV{GIT_DIR} = File::Spec->rel2abs($ENV{GIT_DIR});
+}
+if ($opt_w) {
if (! -d $opt_w."/CVS" ) {
die "$opt_w is not a CVS checkout";
}
}
}
+my $go_back_to = 0;
+
+if ($opt_W) {
+ $opt_v && print "Resetting to $parent\n";
+ $go_back_to = `git symbolic-ref HEAD 2> /dev/null ||
+ git rev-parse HEAD` || die "Could not determine current branch";
+ system("git checkout -q $parent^0") && die "Could not check out $parent^0";
+}
+
$opt_v && print "Applying to CVS commit $commit from parent $parent\n";
# grab the commit message
foreach my $name (keys %todo) {
my $basename = basename($name);
- $basename = "no file " . $basename if (exists($added{$basename}));
- chomp($basename);
+ # CVS reports files that don't exist in the current revision as
+ # "no file $basename" in its "status" output, so we should
+ # anticipate that. Totally unknown files will have a status
+ # "Unknown". However, if they exist in the Attic, their status
+ # will be "Up-to-date" (this means they were added once but have
+ # been removed).
+ $basename = "no file $basename" if $added{$basename};
+
+ $basename =~ s/^\s+//;
+ $basename =~ s/\s+$//;
if (!exists($fullname{$basename})) {
$fullname{$basename} = $name;
push (@canstatusfiles2, $name);
delete($todo{$name});
- }
+ }
}
my @cvsoutput;
@cvsoutput = xargs_safe_pipe_capture([@cvs, 'status'], @canstatusfiles2);
foreach my $l (@cvsoutput) {
- chomp $l;
- if ($l =~ /^File:\s+(.*\S)\s+Status: (.*)$/) {
- if (!exists($fullname{$1})) {
- print STDERR "Huh? Status reported for unexpected file '$1'\n";
- } else {
- $cvsstat{$fullname{$1}} = $2;
- }
- }
+ chomp $l;
+ next unless
+ my ($file, $status) = $l =~ /^File:\s+(.*\S)\s+Status: (.*)$/;
+
+ my $fullname = $fullname{$file};
+ print STDERR "Huh? Status '$status' reported for unexpected file '$file'\n"
+ unless defined $fullname;
+
+ # This response means the file does not exist except in
+ # CVS's attic, so set the status accordingly
+ $status = "In-attic"
+ if $file =~ /^no file /
+ && $status eq 'Up-to-date';
+
+ $cvsstat{$fullname{$file}} = $status
+ if defined $fullname{$file};
}
}
}
-# ... validate new files,
+# ... Validate that new files have the correct status
foreach my $f (@afiles) {
- if (defined ($cvsstat{$f}) and $cvsstat{$f} ne "Unknown") {
- $dirty = 1;
+ next unless defined(my $stat = $cvsstat{$f});
+
+ # This means the file has never been seen before
+ next if $stat eq 'Unknown';
+
+ # This means the file has been seen before but was removed
+ next if $stat eq 'In-attic';
+
+ $dirty = 1;
warn "File $f is already known in your CVS checkout -- perhaps it has been added by another user. Or this may indicate that it exists on a different branch. If this is the case, use -f to force the merge.\n";
warn "Status was: $cvsstat{$f}\n";
- }
}
+
# ... validate known files.
foreach my $f (@files) {
next if grep { $_ eq $f } @afiles;
$dirty = 1;
warn "File $f not up to date but has status '$cvsstat{$f}' in your CVS checkout!\n";
}
+
+ # Depending on how your GIT tree got imported from CVS you may
+ # have a conflict between expanded keywords in your CVS tree and
+ # unexpanded keywords in the patch about to be applied.
+ if ($opt_k) {
+ my $orig_file ="$f.orig";
+ rename $f, $orig_file;
+ open(FILTER_IN, "<$orig_file") or die "Cannot open $orig_file\n";
+ open(FILTER_OUT, ">$f") or die "Cannot open $f\n";
+ while (<FILTER_IN>)
+ {
+ my $line = $_;
+ $line =~ s/\$([A-Z][a-z]+):[^\$]+\$/\$$1\$/g;
+ print FILTER_OUT $line;
+ }
+ close FILTER_IN;
+ close FILTER_OUT;
+ }
}
+
if ($dirty) {
if ($opt_f) { warn "The tree is not clean -- forced merge\n";
$dirty = 0;
}
print "Applying\n";
-`GIT_DIR= git-apply $context --summary --numstat --apply <.cvsexportcommit.diff` || die "cannot patch";
+if ($opt_W) {
+ system("git checkout -q $commit^0") && die "cannot patch";
+} else {
+ `GIT_DIR= git-apply $context --summary --numstat --apply <.cvsexportcommit.diff` || die "cannot patch";
+}
print "Patch applied successfully. Adding new files and directories to CVS\n";
my $dirtypatch = 0;
print "using a patch program. After applying the patch and resolving the\n";
print "problems you may commit using:";
print "\n cd \"$opt_w\"" if $opt_w;
- print "\n $cmd\n\n";
+ print "\n $cmd\n";
+ print "\n git checkout $go_back_to\n" if $go_back_to;
+ print "\n";
exit(1);
}
# clean up
unlink(".cvsexportcommit.diff");
+if ($opt_W) {
+ system("git checkout $go_back_to") && die "cannot move back to $go_back_to";
+ if (!($go_back_to =~ /^[0-9a-fA-F]{40}$/)) {
+ system("git symbolic-ref HEAD $go_back_to") &&
+ die "cannot move back to $go_back_to";
+ }
+}
+
# CVS version 1.11.x and 1.12.x sleeps the wrong way to ensure the timestamp
# used by CVS and the one set by subsequence file modifications are different.
# If they are not different CVS will not detect changes.
sub usage {
print STDERR <<END;
-Usage: GIT_DIR=/path/to/.git ${\basename $0} [-h] [-p] [-v] [-c] [-f] [-u] [-w cvsworkdir] [-m msgprefix] [ parent ] commit
+Usage: GIT_DIR=/path/to/.git git cvsexportcommit [-h] [-p] [-v] [-c] [-f] [-u] [-k] [-w cvsworkdir] [-m msgprefix] [ parent ] commit
END
exit(1);
}