--quiet Make git-send-email less verbose. One line per email
should be all that is output.
+ --dry-run Do everything except actually send the emails.
+
+ --envelope-sender Specify the envelope sender used to send the emails.
+
EOT
exit(1);
}
my ($chain_reply_to, $quiet, $suppress_from, $no_signed_off_cc,
$dry_run) = (1, 0, 0, 0, 0);
my $smtp_server;
+my $envelope_sender;
# Example reply to:
#$initial_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
$term = new FakeTerm "$@: going non-interactive";
}
-my $def_chain = $repo->config_boolean('sendemail.chainreplyto');
-if ($def_chain and $def_chain eq 'false') {
+my $def_chain = $repo->config_bool('sendemail.chainreplyto');
+if (defined $def_chain and not $def_chain) {
$chain_reply_to = 0;
}
"suppress-from" => \$suppress_from,
"no-signed-off-cc|no-signed-off-by-cc" => \$no_signed_off_cc,
"dry-run" => \$dry_run,
+ "envelope-sender=s" => \$envelope_sender,
);
unless ($rc) {
my %parse_alias = (
# multiline formats can be supported in the future
mutt => sub { my $fh = shift; while (<$fh>) {
- if (/^alias\s+(\S+)\s+(.*)$/) {
+ if (/^\s*alias\s+(\S+)\s+(.*)$/) {
my ($alias, $addr) = ($1, $2);
$addr =~ s/#.*$//; # mutt allows # comments
# commas delimit multiple addresses
}
@to = expand_aliases(@to);
+@to = (map { sanitize_address_rfc822($_) } @to);
@initial_cc = expand_aliases(@initial_cc);
@bcclist = expand_aliases(@bcclist);
}
# Variables we set as part of the loop over files
-our ($message_id, $cc, %mail, $subject, $reply_to, $references, $message);
+our ($message_id, %mail, $subject, $reply_to, $references, $message);
sub extract_valid_address {
my $address = shift;
# 1 second since the last time we were called.
# We'll setup a template for the message id, using the "from" address:
-my $message_id_from = extract_valid_address($from);
-my $message_id_template = "<%s-git-send-email-$message_id_from>";
sub make_message_id
{
my $date = time;
my $pseudo_rand = int (rand(4200));
+ my $du_part;
+ for ($from, $committer, $author) {
+ $du_part = extract_valid_address($_);
+ last if ($du_part ne '');
+ }
+ if ($du_part eq '') {
+ use Sys::Hostname qw();
+ $du_part = 'user@' . Sys::Hostname::hostname();
+ }
+ my $message_id_template = "<%s-git-send-email-$du_part>";
$message_id = sprintf $message_id_template, "$date$pseudo_rand";
#print "new message id = $message_id\n"; # Was useful for debugging
}
-$cc = "";
$time = time - scalar $#files;
sub unquote_rfc2047 {
return "$_";
}
+# If an address contains a . in the name portion, the name must be quoted.
+sub sanitize_address_rfc822
+{
+ my ($recipient) = @_;
+ my ($recipient_name) = ($recipient =~ /^(.*?)\s+</);
+ if ($recipient_name && $recipient_name =~ /\./ && $recipient_name !~ /^".*"$/) {
+ my ($name, $addr) = ($recipient =~ /^(.*?)(\s+<.*)/);
+ $recipient = "\"$name\"$addr";
+ }
+ return $recipient;
+}
+
sub send_message
{
my @recipients = unique_email_list(@to);
+ @cc = (map { sanitize_address_rfc822($_) } @cc);
my $to = join (",\n\t", @recipients);
@recipients = unique_email_list(@recipients,@cc,@bcclist);
+ @recipients = (map { extract_valid_address($_) } @recipients);
my $date = format_2822_time($time++);
my $gitversion = '@@GIT_VERSION@@';
if ($gitversion =~ m/..GIT_VERSION../) {
$gitversion = Git::version();
}
- my ($author_name) = ($from =~ /^(.*?)\s+</);
- if ($author_name && $author_name =~ /\./ && $author_name !~ /^".*"$/) {
- my ($name, $addr) = ($from =~ /^(.*?)(\s+<.*)/);
- $from = "\"$name\"$addr";
+ my $cc = join(", ", unique_email_list(@cc));
+ my $ccline = "";
+ if ($cc ne '') {
+ $ccline = "\nCc: $cc";
}
+ $from = sanitize_address_rfc822($from);
+ make_message_id();
+
my $header = "From: $from
-To: $to
-Cc: $cc
+To: $to${ccline}
Subject: $subject
Date: $date
Message-Id: $message_id
$header .= join("\n", @xh) . "\n";
}
+ my @sendmail_parameters = ('-i', @recipients);
+ my $raw_from = $from;
+ $raw_from = $envelope_sender if (defined $envelope_sender);
+ $raw_from = extract_valid_address($raw_from);
+ unshift (@sendmail_parameters,
+ '-f', $raw_from) if(defined $envelope_sender);
+
if ($dry_run) {
# We don't want to send the email.
} elsif ($smtp_server =~ m#^/#) {
my $pid = open my $sm, '|-';
defined $pid or die $!;
if (!$pid) {
- exec($smtp_server,'-i',
- map { extract_valid_address($_) }
- @recipients) or die $!;
+ exec($smtp_server, @sendmail_parameters) or die $!;
}
print $sm "$header\n$message";
close $sm or die $?;
} else {
require Net::SMTP;
$smtp ||= Net::SMTP->new( $smtp_server );
- $smtp->mail( $from ) or die $smtp->message;
+ $smtp->mail( $raw_from ) or die $smtp->message;
$smtp->to( @recipients ) or die $smtp->message;
$smtp->data or die $smtp->message;
$smtp->datasend("$header\n$message") or die $smtp->message;
$smtp->ok or die "Failed to send $subject\n".$smtp->message;
}
if ($quiet) {
- printf "Sent %s\n", $subject;
+ printf (($dry_run ? "Dry-" : "")."Sent %s\n", $subject);
} else {
- print "OK. Log says:\nDate: $date\n";
- if ($smtp) {
+ print (($dry_run ? "Dry-" : "")."OK. Log says:\nDate: $date\n");
+ if ($smtp_server !~ m#^/#) {
print "Server: $smtp_server\n";
+ print "MAIL FROM:<$raw_from>\n";
+ print "RCPT TO:".join(',',(map { "<$_>" } @recipients))."\n";
} else {
- print "Sendmail: $smtp_server\n";
+ print "Sendmail: $smtp_server ".join(' ',@sendmail_parameters)."\n";
}
print "From: $from\nSubject: $subject\nCc: $cc\nTo: $to\n\n";
if ($smtp) {
$reply_to = $initial_reply_to;
$references = $initial_reply_to || '';
-make_message_id();
$subject = $initial_subject;
foreach my $t (@files) {
$subject = $1;
} elsif (/^(Cc|From):\s+(.*)$/) {
- if ($2 eq $from) {
+ if (unquote_rfc2047($2) eq $from) {
+ $from = $2;
next if ($suppress_from);
}
elsif ($1 eq 'From') {
$message = "From: $author_not_sender\n\n$message";
}
- $cc = join(", ", unique_email_list(@cc));
send_message();
$references = "$message_id";
}
}
- make_message_id();
}
if ($compose) {