--------
[verse]
'git checkout' [-q] [-f] [-m] [<branch>]
-'git checkout' [-q] [-f] [-m] [--detach] [<commit>]
+'git checkout' [-q] [-f] [-m] --detach [<branch>]
+'git checkout' [-q] [-f] [-m] [--detach] <commit>
'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>]
'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>...
'git checkout' [-p|--patch] [<tree-ish>] [--] [<paths>...]
successful.
'git checkout' --detach [<branch>]::
-'git checkout' <commit>::
+'git checkout' [--detach] <commit>::
Prepare to work on top of <commit>, by detaching HEAD at it
(see "DETACHED HEAD" section), and updating the index and the
tree will be the state recorded in the commit plus the local
modifications.
+
-Passing `--detach` forces this behavior in the case of a <branch> (without
-the option, giving a branch name to the command would check out the branch,
-instead of detaching HEAD at it), or the current commit,
-if no <branch> is specified.
+When the <commit> argument is a branch name, the `--detach` option can
+be used to detach HEAD at the tip of the branch (`git checkout
+<branch>` would check out that branch without detaching HEAD).
++
+Omitting <branch> detaches HEAD at the tip of the current branch.
'git checkout' [-p|--patch] [<tree-ish>] [--] <pathspec>...::
"--track" in linkgit:git-branch[1] for details.
+
If no '-b' option is given, the name of the new branch will be
-derived from the remote-tracking branch. If "remotes/" or "refs/remotes/"
-is prefixed it is stripped away, and then the part up to the
-next slash (which would be the nickname of the remote) is removed.
+derived from the remote-tracking branch, by looking at the local part of
+the refspec configured for the corresponding remote, and then stripping
+the initial part up to the "*".
This would tell us to use "hack" as the local branch when branching
off of "origin/hack" (or "remotes/origin/hack", or even
"refs/remotes/origin/hack"). If the given name has no slash, or the above
Afterwards you will be ready to prepare your new files, repopulating the
working tree, by copying them from elsewhere, extracting a tarball, etc.
+--ignore-skip-worktree-bits::
+ In sparse checkout mode, `git checkout -- <paths>` would
+ update only entries matched by <paths> and sparse patterns
+ in $GIT_DIR/info/sparse-checkout. This option ignores
+ the sparse patterns and adds back any files in <paths>.
+
-m::
--merge::
When switching branches,
edits from your current working tree. See the ``Interactive Mode''
section of linkgit:git-add[1] to learn how to operate the `--patch` mode.
+--to=<path>::
+ Check out a branch in a separate working directory at
+ `<path>`. A new working directory is linked to the current
+ repository, sharing everything except working directory
+ specific files such as HEAD, index... See "MULTIPLE WORKING
+ TREES" section for more information.
+
+--ignore-other-worktrees::
+ `git checkout` refuses when the wanted ref is already checked
+ out by another worktree. This option makes it check the ref
+ out anyway. In other words, the ref can be held by more than one
+ worktree.
+
<branch>::
Branch to checkout; if it refers to a branch (i.e., a name that,
when prepended with "refs/heads/", is a valid ref), then that
commit, your HEAD becomes "detached" and you are no longer on
any branch (see below for details).
+
-As a special case, the `"@{-N}"` syntax for the N-th last branch
-checks out the branch (instead of detaching). You may also specify
+As a special case, the `"@{-N}"` syntax for the N-th last branch/commit
+checks out branches (instead of detaching). You may also specify
`-` which is synonymous with `"@{-1}"`.
+
As a further special case, you may use `"A...B"` as a shortcut for the
$ git log -g -2 HEAD
------------
+MULTIPLE WORKING TREES
+----------------------
+
+A git repository can support multiple working trees, allowing you to check
+out more than one branch at a time. With `git checkout --to` a new working
+tree is associated with the repository. This new working tree is called a
+"linked working tree" as opposed to the "main working tree" prepared by "git
+init" or "git clone". A repository has one main working tree (if it's not a
+bare repository) and zero or more linked working trees.
+
+Each linked working tree has a private sub-directory in the repository's
+$GIT_DIR/worktrees directory. The private sub-directory's name is usually
+the base name of the linked working tree's path, possibly appended with a
+number to make it unique. For example, when `$GIT_DIR=/path/main/.git` the
+command `git checkout --to /path/other/test-next next` creates the linked
+working tree in `/path/other/test-next` and also creates a
+`$GIT_DIR/worktrees/test-next` directory (or `$GIT_DIR/worktrees/test-next1`
+if `test-next` is already taken).
+
+Within a linked working tree, $GIT_DIR is set to point to this private
+directory (e.g. `/path/main/.git/worktrees/test-next` in the example) and
+$GIT_COMMON_DIR is set to point back to the main working tree's $GIT_DIR
+(e.g. `/path/main/.git`). These settings are made in a `.git` file located at
+the top directory of the linked working tree.
+
+Path resolution via `git rev-parse --git-path` uses either
+$GIT_DIR or $GIT_COMMON_DIR depending on the path. For example, in the
+linked working tree `git rev-parse --git-path HEAD` returns
+`/path/main/.git/worktrees/test-next/HEAD` (not
+`/path/other/test-next/.git/HEAD` or `/path/main/.git/HEAD`) while `git
+rev-parse --git-path refs/heads/master` uses
+$GIT_COMMON_DIR and returns `/path/main/.git/refs/heads/master`,
+since refs are shared across all working trees.
+
+See linkgit:gitrepository-layout[5] for more information. The rule of
+thumb is do not make any assumption about whether a path belongs to
+$GIT_DIR or $GIT_COMMON_DIR when you need to directly access something
+inside $GIT_DIR. Use `git rev-parse --git-path` to get the final path.
+
+When you are done with a linked working tree you can simply delete it.
+The working tree's entry in the repository's $GIT_DIR/worktrees
+directory will eventually be removed automatically (see
+`gc.pruneworktreesexpire` in linkgit::git-config[1]), or you can run
+`git worktree prune` in the main or any linked working tree to
+clean up any stale entries in $GIT_DIR/worktrees.
+
+If you move a linked working directory to another file system, or
+within a file system that does not support hard links, you need to run
+at least one git command inside the linked working directory
+(e.g. `git status`) in order to update its entry in $GIT_DIR/worktrees
+so that it does not get automatically removed.
+
+To prevent a $GIT_DIR/worktrees entry from from being pruned (which
+can be useful in some situations, such as when the
+entry's working tree is stored on a portable device), add a file named
+'locked' to the entry's directory. The file contains the reason in
+plain text. For example, if a linked working tree's `.git` file points
+to `/path/main/.git/worktrees/test-next` then a file named
+`/path/main/.git/worktrees/test-next/locked` will prevent the
+`test-next` entry from being pruned. See
+linkgit:gitrepository-layout[5] for details.
+
+Multiple checkout support for submodules is incomplete. It is NOT
+recommended to make multiple checkouts of a superproject.
+
EXAMPLES
--------