}
test_decode_color () {
- sed -e 's/.\[1m/<WHITE>/g' \
- -e 's/.\[31m/<RED>/g' \
- -e 's/.\[32m/<GREEN>/g' \
- -e 's/.\[33m/<YELLOW>/g' \
- -e 's/.\[34m/<BLUE>/g' \
- -e 's/.\[35m/<MAGENTA>/g' \
- -e 's/.\[36m/<CYAN>/g' \
- -e 's/.\[m/<RESET>/g'
+ awk '
+ function name(n) {
+ if (n == 0) return "RESET";
+ if (n == 1) return "BOLD";
+ if (n == 30) return "BLACK";
+ if (n == 31) return "RED";
+ if (n == 32) return "GREEN";
+ if (n == 33) return "YELLOW";
+ if (n == 34) return "BLUE";
+ if (n == 35) return "MAGENTA";
+ if (n == 36) return "CYAN";
+ if (n == 37) return "WHITE";
+ if (n == 40) return "BLACK";
+ if (n == 41) return "BRED";
+ if (n == 42) return "BGREEN";
+ if (n == 43) return "BYELLOW";
+ if (n == 44) return "BBLUE";
+ if (n == 45) return "BMAGENTA";
+ if (n == 46) return "BCYAN";
+ if (n == 47) return "BWHITE";
+ }
+ {
+ while (match($0, /\x1b\[[0-9;]*m/) != 0) {
+ printf "%s<", substr($0, 1, RSTART-1);
+ codes = substr($0, RSTART+2, RLENGTH-3);
+ if (length(codes) == 0)
+ printf "%s", name(0)
+ else {
+ n = split(codes, ary, ";");
+ sep = "";
+ for (i = 1; i <= n; i++) {
+ printf "%s%s", sep, name(ary[i]);
+ sep = ";"
+ }
+ }
+ printf ">";
+ $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
+ }
+ print
+ }
+ '
+}
+
+nul_to_q () {
+ perl -pe 'y/\000/Q/'
}
q_to_nul () {
tr '\015' Q | sed -e 's/Q$//'
}
+# In some bourne shell implementations, the "unset" builtin returns
+# nonzero status when a variable to be unset was not set in the first
+# place.
+#
+# Use sane_unset when that should not be considered an error.
+
+sane_unset () {
+ unset "$@"
+ return 0
+}
+
test_tick () {
if test -z "${test_tick+set}"
then
satisfied=" "
test_have_prereq () {
- case $satisfied in
- *" $1 "*)
- : yes, have it ;;
- *)
- ! : nope ;;
+ # prerequisites can be concatenated with ','
+ save_IFS=$IFS
+ IFS=,
+ set -- $*
+ IFS=$save_IFS
+
+ total_prereq=0
+ ok_prereq=0
+ missing_prereq=
+
+ for prerequisite
+ do
+ total_prereq=$(($total_prereq + 1))
+ case $satisfied in
+ *" $prerequisite "*)
+ ok_prereq=$(($ok_prereq + 1))
+ ;;
+ *)
+ # Keep a list of missing prerequisites
+ if test -z "$missing_prereq"
+ then
+ missing_prereq=$prerequisite
+ else
+ missing_prereq="$prerequisite,$missing_prereq"
+ fi
+ esac
+ done
+
+ test $total_prereq = $ok_prereq
+}
+
+test_declared_prereq () {
+ case ",$test_prereq," in
+ *,$1,*)
+ return 0
+ ;;
esac
+ return 1
}
# You are not expected to call test_ok_ and test_failure_ directly, use
break
esac
done
- if test -z "$to_skip" && test -n "$prereq" &&
- ! test_have_prereq "$prereq"
+ if test -z "$to_skip" && test -n "$test_prereq" &&
+ ! test_have_prereq "$test_prereq"
then
to_skip=t
fi
case "$to_skip" in
t)
+ of_prereq=
+ if test "$missing_prereq" != "$test_prereq"
+ then
+ of_prereq=" of $test_prereq"
+ fi
+
say_color skip >&3 "skipping test: $@"
- say_color skip "ok $test_count # skip $1"
+ say_color skip "ok $test_count # skip $1 (missing $missing_prereq${of_prereq})"
: true
;;
*)
}
test_expect_failure () {
- test "$#" = 3 && { prereq=$1; shift; } || prereq=
+ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
test "$#" = 2 ||
error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
+ export test_prereq
if ! test_skip "$@"
then
say >&3 "checking known breakage: $2"
}
test_expect_success () {
- test "$#" = 3 && { prereq=$1; shift; } || prereq=
+ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
test "$#" = 2 ||
error "bug in the test script: not 2 or 3 parameters to test-expect-success"
+ export test_prereq
if ! test_skip "$@"
then
say >&3 "expecting success: $2"
echo >&3 ""
}
-test_expect_code () {
- test "$#" = 4 && { prereq=$1; shift; } || prereq=
- test "$#" = 3 ||
- error "bug in the test script: not 3 or 4 parameters to test-expect-code"
- if ! test_skip "$@"
- then
- say >&3 "expecting exit code $1: $3"
- test_run_ "$3"
- if [ "$?" = 0 -a "$eval_ret" = "$1" ]
- then
- test_ok_ "$2"
- else
- test_failure_ "$@"
- fi
- fi
- echo >&3 ""
-}
-
# test_external runs external test scripts that provide continuous
# test output about their progress, and succeeds/fails on
# zero/non-zero exit code. It outputs the test output on stdout even
# Usage: test_external description command arguments...
# Example: test_external 'Perl API' perl ../path/to/test.pl
test_external () {
- test "$#" = 4 && { prereq=$1; shift; } || prereq=
+ test "$#" = 4 && { test_prereq=$1; shift; } || test_prereq=
test "$#" = 3 ||
error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
descr="$1"
shift
+ export test_prereq
if ! test_skip "$descr" "$@"
then
# Announce the script to reduce confusion about the
fi
}
+# debugging-friendly alternatives to "test [-f|-d|-e]"
+# The commands test the existence or non-existence of $1. $2 can be
+# given to provide a more precise diagnosis.
+test_path_is_file () {
+ if ! [ -f "$1" ]
+ then
+ echo "File $1 doesn't exist. $*"
+ false
+ fi
+}
+
+test_path_is_dir () {
+ if ! [ -d "$1" ]
+ then
+ echo "Directory $1 doesn't exist. $*"
+ false
+ fi
+}
+
+test_path_is_missing () {
+ if [ -e "$1" ]
+ then
+ echo "Path exists:"
+ ls -ld "$1"
+ if [ $# -ge 1 ]; then
+ echo "$*"
+ fi
+ false
+ fi
+}
+
+# test_line_count checks that a file has the number of lines it
+# ought to. For example:
+#
+# test_expect_success 'produce exactly one line of output' '
+# do something >output &&
+# test_line_count = 1 output
+# '
+#
+# is like "test $(wc -l <output) = 1" except that it passes the
+# output through when the number of lines is wrong.
+
+test_line_count () {
+ if test $# != 3
+ then
+ error "bug in the test script: not 3 parameters to test_line_count"
+ elif ! test $(wc -l <"$3") "$1" "$2"
+ then
+ echo "test_line_count: line count for $3 !$1 $2"
+ cat "$3"
+ return 1
+ fi
+}
+
# This is not among top-level (test_expect_success | test_expect_failure)
# but is a prefix that can be used in the test script, like:
#
test_must_fail () {
"$@"
- test $? -gt 0 -a $? -le 129 -o $? -gt 192
+ exit_code=$?
+ if test $exit_code = 0; then
+ echo >&2 "test_must_fail: command succeeded: $*"
+ return 1
+ elif test $exit_code -gt 129 -a $exit_code -le 192; then
+ echo >&2 "test_must_fail: died by signal: $*"
+ return 1
+ elif test $exit_code = 127; then
+ echo >&2 "test_must_fail: command not found: $*"
+ return 1
+ fi
+ return 0
}
# Similar to test_must_fail, but tolerates success, too. This is
test_might_fail () {
"$@"
- test $? -ge 0 -a $? -le 129 -o $? -gt 192
+ exit_code=$?
+ if test $exit_code -gt 129 -a $exit_code -le 192; then
+ echo >&2 "test_might_fail: died by signal: $*"
+ return 1
+ elif test $exit_code = 127; then
+ echo >&2 "test_might_fail: command not found: $*"
+ return 1
+ fi
+ return 0
+}
+
+# Similar to test_must_fail and test_might_fail, but check that a
+# given command exited with a given exit code. Meant to be used as:
+#
+# test_expect_success 'Merge with d/f conflicts' '
+# test_expect_code 1 git merge "merge msg" B master
+# '
+
+test_expect_code () {
+ want_code=$1
+ shift
+ "$@"
+ exit_code=$?
+ if test $exit_code = $want_code
+ then
+ echo >&2 "test_expect_code: command exited with $exit_code: $*"
+ return 0
+ else
+ echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*"
+ return 1
+ fi
}
# test_cmp is a helper function to compare actual and expected output.
test_create_repo () {
test "$#" = 1 ||
error "bug in the test script: not 1 parameter to test-create-repo"
- owd=`pwd`
repo="$1"
mkdir -p "$repo"
- cd "$repo" || error "Cannot setup test environment"
- "$GIT_EXEC_PATH/git-init" "--template=$TEST_DIRECTORY/../templates/blt/" >&3 2>&4 ||
- error "cannot run git init -- have you built things yet?"
- mv .git/hooks .git/hooks-disabled
- cd "$owd"
+ (
+ cd "$repo" || error "Cannot setup test environment"
+ "$GIT_EXEC_PATH/git-init" "--template=$GIT_BUILD_DIR/templates/blt/" >&3 2>&4 ||
+ error "cannot run git init -- have you built things yet?"
+ mv .git/hooks .git/hooks-disabled
+ ) || exit
}
test_done () {
GIT_EXIT_OK=t
- test_results_dir="$TEST_DIRECTORY/test-results"
- mkdir -p "$test_results_dir"
- test_results_path="$test_results_dir/${0%.sh}-$$.counts"
- echo "total $test_count" >> $test_results_path
- echo "success $test_success" >> $test_results_path
- echo "fixed $test_fixed" >> $test_results_path
- echo "broken $test_broken" >> $test_results_path
- echo "failed $test_failure" >> $test_results_path
- echo "" >> $test_results_path
+ if test -z "$HARNESS_ACTIVE"; then
+ test_results_dir="$TEST_DIRECTORY/test-results"
+ mkdir -p "$test_results_dir"
+ test_results_path="$test_results_dir/${0%.sh}-$$.counts"
+
+ echo "total $test_count" >> $test_results_path
+ echo "success $test_success" >> $test_results_path
+ echo "fixed $test_fixed" >> $test_results_path
+ echo "broken $test_broken" >> $test_results_path
+ echo "failed $test_failure" >> $test_results_path
+ echo "" >> $test_results_path
+ fi
if test "$test_fixed" != 0
then
# Test the binaries we have just built. The tests are kept in
# t/ subdirectory and are run in 'trash directory' subdirectory.
-TEST_DIRECTORY=$(pwd)
+if test -z "$TEST_DIRECTORY"
+then
+ # We allow tests to override this, in case they want to run tests
+ # outside of t/, e.g. for running tests on the test library
+ # itself.
+ TEST_DIRECTORY=$(pwd)
+fi
+GIT_BUILD_DIR="$TEST_DIRECTORY"/..
+
if test -n "$valgrind"
then
make_symlink () {
test -x "$1" || return
base=$(basename "$1")
- symlink_target=$TEST_DIRECTORY/../$base
+ symlink_target=$GIT_BUILD_DIR/$base
# do not override scripts
if test -x "$symlink_target" &&
test ! -d "$symlink_target" &&
# override all git executables in TEST_DIRECTORY/..
GIT_VALGRIND=$TEST_DIRECTORY/valgrind
mkdir -p "$GIT_VALGRIND"/bin
- for file in $TEST_DIRECTORY/../git* $TEST_DIRECTORY/../test-*
+ for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
do
make_valgrind_symlink $file
done
elif test -n "$GIT_TEST_INSTALLED" ; then
GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) ||
error "Cannot run git from $GIT_TEST_INSTALLED."
- PATH=$GIT_TEST_INSTALLED:$TEST_DIRECTORY/..:$PATH
+ PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH
GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
else # normal case, use ../bin-wrappers only unless $with_dashes:
- git_bin_dir="$TEST_DIRECTORY/../bin-wrappers"
+ git_bin_dir="$GIT_BUILD_DIR/bin-wrappers"
if ! test -x "$git_bin_dir/git" ; then
if test -z "$with_dashes" ; then
say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH"
with_dashes=t
fi
PATH="$git_bin_dir:$PATH"
- GIT_EXEC_PATH=$TEST_DIRECTORY/..
+ GIT_EXEC_PATH=$GIT_BUILD_DIR
if test -n "$with_dashes" ; then
- PATH="$TEST_DIRECTORY/..:$PATH"
+ PATH="$GIT_BUILD_DIR:$PATH"
fi
fi
-GIT_TEMPLATE_DIR=$(pwd)/../templates/blt
+GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt
unset GIT_CONFIG
GIT_CONFIG_NOSYSTEM=1
GIT_CONFIG_NOGLOBAL=1
export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_CONFIG_NOGLOBAL
-. ../GIT-BUILD-OPTIONS
+. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS
if test -z "$GIT_TEST_CMP"
then
fi
fi
-GITPERLLIB=$(pwd)/../perl/blib/lib:$(pwd)/../perl/blib/arch/auto/Git
+GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git
export GITPERLLIB
-test -d ../templates/blt || {
+test -d "$GIT_BUILD_DIR"/templates/blt || {
error "You haven't built things yet, have you?"
}
if test -z "$GIT_TEST_INSTALLED" && test -z "$NO_PYTHON"
then
- GITPYTHONLIB="$(pwd)/../git_remote_helpers/build/lib"
+ GITPYTHONLIB="$GIT_BUILD_DIR/git_remote_helpers/build/lib"
export GITPYTHONLIB
- test -d ../git_remote_helpers/build || {
+ test -d "$GIT_BUILD_DIR"/git_remote_helpers/build || {
error "You haven't built git_remote_helpers yet, have you?"
}
fi
-if ! test -x ../test-chmtime; then
+if ! test -x "$GIT_BUILD_DIR"/test-chmtime; then
echo >&2 'You need to build test-chmtime:'
echo >&2 'Run "make test-chmtime" in the source (toplevel) directory'
exit 1
# in subprocesses like git equals our $PWD (for pathname comparisons).
cd -P "$test" || exit 1
+HOME=$(pwd)
+export HOME
+
this_test=${0##*/}
this_test=${this_test%%-*}
for skp in $GIT_SKIP_TESTS
# no POSIX permissions
# backslashes in pathspec are converted to '/'
# exec does not inherit the PID
+ test_set_prereq MINGW
;;
*)
test_set_prereq POSIXPERM
test_set_prereq BSLASHPSPEC
test_set_prereq EXECKEEPSPID
+ test_set_prereq NOT_MINGW
;;
esac
# test whether the filesystem supports symbolic links
ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS
rm -f y
+
+# When the tests are run as root, permission tests will report that
+# things are writable when they shouldn't be.
+test -w / || test_set_prereq SANITY