SYNOPSIS
--------
[verse]
-'git merge' [-n] [--stat] [--no-commit] [--squash] [-s <strategy>]...
- [-m <msg>] <commit>...
+'git merge' [-n] [--stat] [--no-commit] [--squash]
+ [-s <strategy>] [-X <strategy-option>]
+ [--[no-]rerere-autoupdate] [-m <msg>] <commit>...
'git merge' <msg> HEAD <commit>...
+'git merge' --abort
DESCRIPTION
-----------
historical reasons. Do not use it from the command line or in
new scripts. It is the same as `git merge -m <msg> <commit>...`.
+The third syntax ("`git merge --abort`") can only be run after the
+merge has resulted in conflicts. 'git merge --abort' will abort the
+merge process and try to reconstruct the pre-merge state. However,
+if there were uncommitted changes when the merge started (and
+especially if those changes were further modified after the merge
+was started), 'git merge --abort' will in some cases be unable to
+reconstruct the original (pre-merge) changes. Therefore:
+
*Warning*: Running 'git merge' with uncommitted changes is
discouraged: while possible, it leaves you in a state that is hard to
back out of in the case of a conflict.
-m <msg>::
Set the commit message to be used for the merge commit (in
- case one is created). The 'git fmt-merge-msg' command can be
- used to give a good default for automated 'git merge'
- invocations.
+ case one is created).
++
+If `--log` is specified, a shortlog of the commits being merged
+will be appended to the specified message.
++
+The 'git fmt-merge-msg' command can be
+used to give a good default for automated 'git merge'
+invocations.
+
+--rerere-autoupdate::
+--no-rerere-autoupdate::
+ Allow the rerere mechanism to update the index with the
+ result of auto-conflict resolution if possible.
+
+--abort::
+ Abort the current conflict resolution process, and
+ try to reconstruct the pre-merge state.
++
+If there were uncommitted worktree changes present when the merge
+started, 'git merge --abort' will in some cases be unable to
+reconstruct these changes. It is therefore recommended to always
+commit or stash your changes before running 'git merge'.
++
+'git merge --abort' is equivalent to 'git reset --merge' when
+`MERGE_HEAD` is present.
<commit>...::
Commits, usually other branch heads, to merge into our branch.
If all named commits are already ancestors of `HEAD`, 'git merge'
will exit early with the message "Already up-to-date."
-HOW MERGE WORKS
----------------
+FAST-FORWARD MERGE
+------------------
-A merge is always between the current `HEAD` and one or more
-commits (usually a branch head or tag).
+Often the current branch head is an ancestor of the named commit.
+This is the most common case especially when invoked from 'git
+pull': you are tracking an upstream repository, you have committed
+no local changes, and now you want to update to a newer upstream
+revision. In this case, a new commit is not needed to store the
+combined history; instead, the `HEAD` (along with the index) is
+updated to point at the named commit, without creating an extra
+merge commit.
-Two kinds of merge can happen:
+This behavior can be suppressed with the `--no-ff` option.
-* `HEAD` is already contained in the merged commit. This is the
- most common case especially when invoked from 'git pull':
- you are tracking an upstream repository, have committed no local
- changes and now you want to update to a newer upstream revision.
- Your `HEAD` (and the index) is updated to point at the merged
- commit, without creating an extra merge commit. This is
- called "Fast-forward".
+TRUE MERGE
+----------
-* Both the merged commit and `HEAD` are independent and must be
- tied together by a merge commit that has both of them as its parents.
- The rest of this section describes this "True merge" case.
+Except in a fast-forward merge (see above), the branches to be
+merged must be tied together by a merge commit that has both of them
+as its parents.
-The chosen merge strategy merges the two commits into a single
-new source tree.
-When things merge cleanly, this is what happens:
+A merged version reconciling the changes from all branches to be
+merged is committed, and your `HEAD`, index, and working tree are
+updated to it. It is possible to have modifications in the working
+tree as long as they do not overlap; the update will preserve them.
-1. The results are updated both in the index file and in your
- working tree;
-2. Index file is written out as a tree;
-3. The tree gets committed; and
-4. The `HEAD` pointer gets advanced.
+When it is not obvious how to reconcile the changes, the following
+happens:
-Because of 2., we require that the original state of the index
-file matches exactly the current `HEAD` commit; otherwise we
-will write out your local changes already registered in your
-index file along with the merge result, which is not good.
-Because 1. involves only those paths differing between your
-branch and the branch you are merging
-(which is typically a fraction of the whole tree), you can
-have local modifications in your working tree as long as they do
-not overlap with what the merge updates.
-
-When there are conflicts, the following happens:
-
-1. `HEAD` stays the same.
-
-2. Cleanly merged paths are updated both in the index file and
+1. The `HEAD` pointer stays the same.
+2. The `MERGE_HEAD` ref is set to point to the other branch head.
+3. Paths that merged cleanly are updated both in the index file and
in your working tree.
-
-3. For conflicting paths, the index file records up to three
- versions; stage1 stores the version from the common ancestor,
- stage2 from `HEAD`, and stage3 from the other branch (you
+4. For conflicting paths, the index file records up to three
+ versions: stage 1 stores the version from the common ancestor,
+ stage 2 from `HEAD`, and stage 3 from `MERGE_HEAD` (you
can inspect the stages with `git ls-files -u`). The working
tree files contain the result of the "merge" program; i.e. 3-way
- merge results with familiar conflict markers `<<< === >>>`.
-
-4. No other changes are done. In particular, the local
+ merge results with familiar conflict markers `<<<` `===` `>>>`.
+5. No other changes are made. In particular, the local
modifications you had before you started merge will stay the
same and the index entries for them stay as they were,
i.e. matching `HEAD`.
If you tried a merge which resulted in complex conflicts and
-want to start over, you can recover with `git reset --merge`.
+want to start over, you can recover with `git merge --abort`.
HOW CONFLICTS ARE PRESENTED
---------------------------
* Decide not to merge. The only clean-ups you need are to reset
the index file to the `HEAD` commit to reverse 2. and to clean
- up working tree changes made by 2. and 3.; `git-reset --hard` can
- be used for this.
+ up working tree changes made by 2. and 3.; `git merge --abort`
+ can be used for this.
* Resolve the conflicts. Git will mark the conflicts in
the working tree. Edit the files into shape and
mergetool which will work you through the merge.
* Look at the diffs. `git diff` will show a three-way diff,
- highlighting changes from both the HEAD and their versions.
+ highlighting changes from both the `HEAD` and `MERGE_HEAD`
+ versions.
- * Look at the diffs
on their own. `git log --merge -p <path>`
- will show diffs first for the HEAD version and then
- their version.
+ * Look at the diffs
from each branch. `git log --merge -p <path>`
+ will show diffs first for the `HEAD` version and then the
+ `MERGE_HEAD` version.
* Look at the originals. `git show :1:filename` shows the
- common ancestor, `git show :2:filename` shows the HEAD
- version and `git show :3:filename` shows their version.
+ common ancestor, `git show :2:filename` shows the `HEAD`
+ version, and `git show :3:filename` shows the `MERGE_HEAD`
+ version.
EXAMPLES