Includes
~~~~~~~~
-You can include one config file from another by setting the special
+You can include a config file from another by setting the special
`include.path` variable to the name of the file to be included. The
variable takes a pathname as its value, and is subject to tilde
-expansion.
+expansion. `include.path` can be given multiple times.
-The
-included file is expanded immediately, as if its contents had been
+The included file is expanded immediately, as if its contents had been
found at the location of the include directive. If the value of the
-`include.path` variable is a relative path, the path is considered to be
-relative to the configuration file in which the include directive was
-found. See below for examples.
+`include.path` variable is a relative path, the path is considered to
+be relative to the configuration file in which the include directive
+was found. See below for examples.
+Conditional includes
+~~~~~~~~~~~~~~~~~~~~
+
+You can include a config file from another conditionally by setting a
+`includeIf.<condition>.path` variable to the name of the file to be
+included. The variable's value is treated the same way as
+`include.path`. `includeIf.<condition>.path` can be given multiple times.
+
+The condition starts with a keyword followed by a colon and some data
+whose format and meaning depends on the keyword. Supported keywords
+are:
+
+`gitdir`::
+
+ The data that follows the keyword `gitdir:` is used as a glob
+ pattern. If the location of the .git directory matches the
+ pattern, the include condition is met.
++
+The .git location may be auto-discovered, or come from `$GIT_DIR`
+environment variable. If the repository is auto discovered via a .git
+file (e.g. from submodules, or a linked worktree), the .git location
+would be the final location where the .git directory is, not where the
+.git file is.
++
+The pattern can contain standard globbing wildcards and two additional
+ones, `**/` and `/**`, that can match multiple path components. Please
+refer to linkgit:gitignore[5] for details. For convenience:
+
+ * If the pattern starts with `~/`, `~` will be substituted with the
+ content of the environment variable `HOME`.
+
+ * If the pattern starts with `./`, it is replaced with the directory
+ containing the current config file.
+
+ * If the pattern does not start with either `~/`, `./` or `/`, `**/`
+ will be automatically prepended. For example, the pattern `foo/bar`
+ becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
+
+ * If the pattern ends with `/`, `**` will be automatically added. For
+ example, the pattern `foo/` becomes `foo/**`. In other words, it
+ matches "foo" and everything inside, recursively.
+
+`gitdir/i`::
+ This is the same as `gitdir` except that matching is done
+ case-insensitively (e.g. on case-insensitive file sytems)
+
+A few more notes on matching via `gitdir` and `gitdir/i`:
+
+ * Symlinks in `$GIT_DIR` are not resolved before matching.
+
+ * Note that "../" is not special and will match literally, which is
+ unlikely what you want.
Example
~~~~~~~
path = foo ; expand "foo" relative to the current file
path = ~/foo ; expand "foo" in your `$HOME` directory
+ ; include if $GIT_DIR is /path/to/foo/.git
+ [includeIf "gitdir:/path/to/foo/.git"]
+ path = /path/to/foo.inc
+
+ ; include for all repositories inside /path/to/group
+ [includeIf "gitdir:/path/to/group/"]
+ path = /path/to/foo.inc
+
+ ; include for all repositories inside $HOME/to/group
+ [includeIf "gitdir:~/to/group/"]
+ path = /path/to/foo.inc
Values
~~~~~~
be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
`no-ul`, etc).
+
+An empty color string produces no color effect at all. This can be used
+to avoid coloring specific elements without disabling color entirely.
++
For git's pre-defined color slots, the attributes are meant to be reset
at the beginning of each item in the colored output. So setting
`color.decorate.branch` to `black` will paint that branch name in a
"`$GIT_DIR/logs/<ref>`", by appending the new and old
SHA-1, the date/time and the reason of the update, but
only when the file exists. If this configuration
- variable is set to true, missing "`$GIT_DIR/logs/<ref>`"
+ variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`"
file is automatically created for branch heads (i.e. under
- refs/heads/), remote refs (i.e. under refs/remotes/),
- note refs (i.e. under refs/notes/), and the symbolic ref HEAD.
+ `refs/heads/`), remote refs (i.e. under `refs/remotes/`),
+ note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`.
+ If it is set to `always`, then a missing reflog is automatically
+ created for any ref under `refs/`.
+
This information can be used to determine what commit
was the tip of a branch "2 days ago".
i.e. it cannot be used to follow multiple files and does not work well
on non-linear history.
+log.graphColors::
+ A list of colors, separated by commas, that can be used to draw
+ history lines in `git log --graph`.
+
log.showRoot::
If true, the initial commit will be shown as a big creation event.
This is equivalent to a diff against an empty tree.
value is set to `superproject` the submodule to be cloned computes
its alternates location relative to the superprojects alternate.
-submodule.alternateErrorStrategy
+submodule.alternateErrorStrategy::
Specifies how to treat errors with the alternates for a submodule
as computed via `submodule.alternateLocation`. Possible values are
`ignore`, `info`, `die`. Default is `die`.
This option is passed unchanged to gpg's --local-user parameter,
so you may specify a key using any method that gpg supports.
-versionsort.prereleaseSuffix::
- When version sort is used in linkgit:git-tag[1], prerelease
- tags (e.g. "1.0-rc1") may appear after the main release
- "1.0". By specifying the suffix "-rc" in this variable,
- "1.0-rc1" will appear before "1.0".
-+
-This variable can be specified multiple times, once per suffix. The
-order of suffixes in the config file determines the sorting order
-(e.g. if "-pre" appears before "-rc" in the config file then 1.0-preXX
-is sorted before 1.0-rcXX). The sorting order between different
-suffixes is undefined if they are in multiple config files.
+versionsort.prereleaseSuffix (deprecated)::
+ Deprecated alias for `versionsort.suffix`. Ignored if
+ `versionsort.suffix` is set.
+
+versionsort.suffix::
+ Even when version sort is used in linkgit:git-tag[1], tagnames
+ with the same base version but different suffixes are still sorted
+ lexicographically, resulting e.g. in prerelease tags appearing
+ after the main release (e.g. "1.0-rc1" after "1.0"). This
+ variable can be specified to determine the sorting order of tags
+ with different suffixes.
++
+By specifying a single suffix in this variable, any tagname containing
+that suffix will appear before the corresponding main release. E.g. if
+the variable is set to "-rc", then all "1.0-rcX" tags will appear before
+"1.0". If specified multiple times, once per suffix, then the order of
+suffixes in the configuration will determine the sorting order of tagnames
+with those suffixes. E.g. if "-pre" appears before "-rc" in the
+configuration, then all "1.0-preX" tags will be listed before any
+"1.0-rcX" tags. The placement of the main release tag relative to tags
+with various suffixes can be determined by specifying the empty suffix
+among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and
+"-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags
+are listed first, followed by "v4.8", then "v4.8-ckX" and finally
+"v4.8-bfsX".
++
+If more than one suffixes match the same tagname, then that tagname will
+be sorted according to the suffix which starts at the earliest position in
+the tagname. If more than one different matching suffixes start at
+that earliest position, then that tagname will be sorted according to the
+longest of those suffixes.
+The sorting order between different suffixes is undefined if they are
+in multiple config files.
web.browser::
Specify a web browser that may be used by some commands.