-----------
Inspects, updates and manages submodules.
-A submodule allows you to keep another Git repository in a subdirectory
-of your repository. The other repository has its own history, which does not
-interfere with the history of the current repository. This can be used to
-have external dependencies such as third party libraries for example.
-
-When cloning or pulling a repository containing submodules however,
-these will not be checked out by default; the 'init' and 'update'
-subcommands will maintain submodules checked out and at
-appropriate revision in your working tree.
-
-Submodules are composed from a so-called `gitlink` tree entry
-in the main repository that refers to a particular commit object
-within the inner repository that is completely separate.
-A record in the `.gitmodules` (see linkgit:gitmodules[5]) file at the
-root of the source tree assigns a logical name to the submodule and
-describes the default URL the submodule shall be cloned from.
-The logical name can be used for overriding this URL within your
-local repository configuration (see 'submodule init').
-
-Submodules are not to be confused with remotes, which are other
-repositories of the same project; submodules are meant for
-different projects you would like to make part of your source tree,
-while the history of the two projects still stays completely
-independent and you cannot modify the contents of the submodule
-from within the main project.
-If you want to merge the project histories and want to treat the
-aggregated whole as a single project from then on, you may want to
-add a remote for the other project and use the 'subtree' merge strategy,
-instead of treating the other project as a submodule. Directories
-that come from both projects can be cloned and checked out as a whole
-if you choose to go that route.
+For more information about submodules, see linkgit:gitsubmodules[7].
COMMANDS
--------
to the changeset to be committed next to the current
project: the current project is termed the "superproject".
+
-This requires at least one argument: <repository>. The optional
-argument <path> is the relative location for the cloned submodule
-to exist in the superproject. If <path> is not given, the
-"humanish" part of the source repository is used ("repo" for
-"/path/to/repo.git" and "foo" for "host.xz:foo/.git").
-The <path> is also used as the submodule's logical name in its
-configuration entries unless `--name` is used to specify a logical name.
-+
<repository> is the URL of the new submodule's origin repository.
This may be either an absolute URL, or (if it begins with ./
-or ../), the location relative to the superproject's origin
+or ../), the location relative to the superproject's default remote
repository (Please note that to specify a repository 'foo.git'
which is located right next to a superproject 'bar.git', you'll
have to use '../foo.git' instead of './foo.git' - as one might expect
when following the rules for relative URLs - because the evaluation
of relative URLs in Git is identical to that of relative directories).
-If the superproject doesn't have an origin configured
++
+The default remote is the remote of the remote tracking branch
+of the current branch. If no such remote tracking branch exists or
+the HEAD is detached, "origin" is assumed to be the default remote.
+If the superproject doesn't have a default remote configured
the superproject is its own authoritative upstream and the current
working directory is used instead.
+
-<path> is the relative location for the cloned submodule to
-exist in the superproject. If <path> does not exist, then the
-submodule is created by cloning from the named URL. If <path> does
-exist and is already a valid Git repository, then this is added
-to the changeset without cloning. This second form is provided
-to ease creating a new submodule from scratch, and presumes
-the user will later push the submodule to the given URL.
+The optional argument <path> is the relative location for the cloned
+submodule to exist in the superproject. If <path> is not given, the
+canonical part of the source repository is used ("repo" for
+"/path/to/repo.git" and "foo" for "host.xz:foo/.git"). If <path>
+exists and is already a valid Git repository, then it is staged
+for commit without cloning. The <path> is also used as the submodule's
+logical name in its configuration entries unless `--name` is used
+to specify a logical name.
+
-In either case, the given URL is recorded into .gitmodules for
-use by subsequent users cloning the superproject. If the URL is
-given relative to the superproject's repository, the presumption
-is the superproject and submodule repositories will be kept
-together in the same relative location, and only the
-superproject's URL needs to be provided: git-submodule will correctly
-locate the submodule using the relative URL in .gitmodules.
+The given URL is recorded into `.gitmodules` for use by subsequent users
+cloning the superproject. If the URL is given relative to the
+superproject's repository, the presumption is the superproject and
+submodule repositories will be kept together in the same relative
+location, and only the superproject's URL needs to be provided.
+git-submodule will correctly locate the submodule using the relative
+URL in `.gitmodules`.
status [--cached] [--recursive] [--] [<path>...]::
Show the status of the submodules. This will print the SHA-1 of the
init [--] [<path>...]::
Initialize the submodules recorded in the index (which were
- added and committed elsewhere) by copying submodule
- names and urls from .gitmodules to .git/config.
- Optional <path> arguments limit which submodules will be initialized.
- It will also copy the value of `submodule.$name.update` into
- .git/config.
- The key used in .git/config is `submodule.$name.url`.
- This command does not alter existing information in .git/config.
- You can then customize the submodule clone URLs in .git/config
- for your local setup and proceed to `git submodule update`;
- you can also just use `git submodule update --init` without
- the explicit 'init' step if you do not intend to customize
- any submodule locations.
+ added and committed elsewhere) by setting `submodule.$name.url`
+ in .git/config. It uses the same setting from `.gitmodules` as
+ a template. If the URL is relative, it will be resolved using
+ the default remote. If there is no default remote, the current
+ repository will be assumed to be upstream.
++
+Optional <path> arguments limit which submodules will be initialized.
+If no path is specified and submodule.active has been configured, submodules
+configured to be active will be initialized, otherwise all submodules are
+initialized.
++
+When present, it will also copy the value of `submodule.$name.update`.
+This command does not alter existing information in .git/config.
+You can then customize the submodule clone URLs in .git/config
+for your local setup and proceed to `git submodule update`;
+you can also just use `git submodule update --init` without
+the explicit 'init' step if you do not intend to customize
+any submodule locations.
++
+See the add subcommand for the definition of default remote.
deinit [-f|--force] (--all|[--] <path>...)::
Unregister the given submodules, i.e. remove the whole
tree. Further calls to `git submodule update`, `git submodule foreach`
and `git submodule sync` will skip any unregistered submodules until
they are initialized again, so use this command if you don't want to
- have a local checkout of the submodule in your working tree anymore. If
- you really want to remove a submodule from the repository and commit
- that use linkgit:git-rm[1] instead.
+ have a local checkout of the submodule in your working tree anymore.
+
When the command is run without pathspec, it errors out,
instead of deinit-ing everything, to prevent mistakes.
+
If `--force` is specified, the submodule's working tree will
be removed even if it contains local modifications.
++
+If you really want to remove a submodule from the repository and commit
+that use linkgit:git-rm[1] instead. See linkgit:gitsubmodules[7] for removal
+options.
update [--init] [--remote] [-N|--no-fetch] [--[no-]recommend-shallow] [-f|--force] [--checkout|--rebase|--merge] [--reference <repository>] [--depth <depth>] [--recursive] [--jobs <n>] [--] [<path>...]::
+
none;; the submodule is not updated.
If the submodule is not yet initialized, and you just want to use the
-setting as stored in .gitmodules, you can automatically initialize the
+setting as stored in `.gitmodules`, you can automatically initialize the
submodule with the `--init` option.
If `--recursive` is specified, this command will recurse into the
Evaluates an arbitrary shell command in each checked out submodule.
The command has access to the variables $name, $path, $sha1 and
$toplevel:
- $name is the name of the relevant submodule section in .gitmodules,
+ $name is the name of the relevant submodule section in `.gitmodules`,
$path is the name of the submodule directory relative to the
superproject, $sha1 is the commit as recorded in the superproject,
and $toplevel is the absolute path to the top-level of the superproject.
sync [--recursive] [--] [<path>...]::
Synchronizes submodules' remote URL configuration setting
- to the value specified in .gitmodules. It will only affect those
+ to the value specified in `.gitmodules`. It will only affect those
submodules which already have a URL entry in .git/config (that is the
case when they are initialized or freshly added). This is useful when
submodule URLs change upstream and you need to update your local
--[no-]recommend-shallow::
This option is only valid for the update command.
The initial clone of a submodule will use the recommended
- `submodule.<name>.shallow` as provided by the .gitmodules file
+ `submodule.<name>.shallow` as provided by the `.gitmodules` file
by default. To ignore the suggestions use `--no-recommend-shallow`.
-j <n>::
FILES
-----
-When initializing submodules, a .gitmodules file in the top-level directory
+When initializing submodules, a `.gitmodules` file in the top-level directory
of the containing repository is used to find the url of each submodule.
This file should be formatted in the same way as `$GIT_DIR/config`. The key
to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5]
for details.
+SEE ALSO
+--------
+linkgit:gitsubmodules[7], linkgit:gitmodules[5].
+
GIT
---
Part of the linkgit:git[1] suite