# You should have received a copy of the GNU General Public License
# along with this program. If not, see http://www.gnu.org/licenses/ .
-# Keep the original TERM for say_color
-ORIGINAL_TERM=$TERM
-
# Test the binaries we have just built. The tests are kept in
# t/ subdirectory and are run in 'trash directory' subdirectory.
if test -z "$TEST_DIRECTORY"
esac
# For repeatability, reset the environment to known value.
+# TERM is sanitized below, after saving color control sequences.
LANG=C
LC_ALL=C
PAGER=cat
TZ=UTC
-TERM=dumb
-export LANG LC_ALL PAGER TERM TZ
+export LANG LC_ALL PAGER TZ
EDITOR=:
# A call to "unset" with no arguments causes at least Solaris 10
# /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets
# Zero SHA-1
_z40=0000000000000000000000000000000000000000
+EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904
+EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
+
# Line feed
LF='
'
# when case-folding filenames
u200c=$(printf '\342\200\214')
-export _x05 _x40 _z40 LF u200c
+export _x05 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB
# Each test should start with something like this, after copyright notices:
#
# This test checks if command xyzzy does the right thing...
# '
# . ./test-lib.sh
+test "x$TERM" != "xdumb" && (
+ test -t 1 &&
+ tput bold >/dev/null 2>&1 &&
+ tput setaf 1 >/dev/null 2>&1 &&
+ tput sgr0 >/dev/null 2>&1
+ ) &&
+ color=t
-unset color
while test "$#" -ne 0
do
case "$1" in
}
run_list=$1; shift ;;
--run=*)
- run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;;
+ run_list=${1#--*=}; shift ;;
-h|--h|--he|--hel|--help)
help=t; shift ;;
-v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
verbose=t; shift ;;
--verbose-only=*)
- verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
+ verbose_only=${1#--*=}
shift ;;
-q|--q|--qu|--qui|--quie|--quiet)
# Ignore --quiet under a TAP::Harness. Saying how many tests
valgrind=memcheck
shift ;;
--valgrind=*)
- valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)')
+ valgrind=${1#--*=}
shift ;;
--valgrind-only=*)
- valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
+ valgrind_only=${1#--*=}
shift ;;
--tee)
shift ;; # was handled already
--root=*)
- root=$(expr "z$1" : 'z[^=]*=\(.*\)')
+ root=${1#--*=}
shift ;;
--chain-lint)
GIT_TEST_CHAIN_LINT=1
verbose=t
fi
+if test -n "$color"
+then
+ # Save the color control sequences now rather than run tput
+ # each time say_color() is called. This is done for two
+ # reasons:
+ # * TERM will be changed to dumb
+ # * HOME will be changed to a temporary directory and tput
+ # might need to read ~/.terminfo from the original HOME
+ # directory to get the control sequences
+ # Note: This approach assumes the control sequences don't end
+ # in a newline for any terminal of interest (command
+ # substitutions strip trailing newlines). Given that most
+ # (all?) terminals in common use are related to ECMA-48, this
+ # shouldn't be a problem.
+ say_color_error=$(tput bold; tput setaf 1) # bold red
+ say_color_skip=$(tput setaf 4) # blue
+ say_color_warn=$(tput setaf 3) # brown/yellow
+ say_color_pass=$(tput setaf 2) # green
+ say_color_info=$(tput setaf 6) # cyan
+ say_color_reset=$(tput sgr0)
+ say_color_="" # no formatting for normal text
+ say_color () {
+ test -z "$1" && test -n "$quiet" && return
+ eval "say_color_color=\$say_color_$1"
+ shift
+ printf "%s\\n" "$say_color_color$*$say_color_reset"
+ }
+else
+ say_color() {
+ test -z "$1" && test -n "$quiet" && return
+ shift
+ printf "%s\n" "$*"
+ }
+fi
+
+TERM=dumb
+export TERM
+
error () {
say_color error "error: $*"
GIT_EXIT_OK=t
exec 4>/dev/null 3>/dev/null
fi
+# Send any "-x" output directly to stderr to avoid polluting tests
+# which capture stderr. We can do this unconditionally since it
+# has no effect if tracing isn't turned on.
+#
+# Note that this sets up the trace fd as soon as we assign the variable, so it
+# must come after the creation of descriptor 4 above. Likewise, we must never
+# unset this, as it has the side effect of closing descriptor 4, which we
+# use to show verbose tests to the user.
+#
+# Note also that we don't need or want to export it. The tracing is local to
+# this shell, and we would not want to influence any shells we exec.
+BASH_XTRACEFD=4
+
test_failure=0
test_count=0
test_fixed=0
fi
}
+want_trace () {
+ test "$trace" = t && test "$verbose" = t
+}
+
# This is a separate function because some tests use
# "return" to end a test_expect_success block early
# (and we want to make sure we run any cleanup like
test_eval_inner_ () {
# Do not add anything extra (including LF) after '$*'
eval "
- test \"$trace\" = t && set -x
+ want_trace && set -x
$*"
}
{
test_eval_inner_ "$@" </dev/null >&3 2>&4
test_eval_ret_=$?
- if test "$trace" = t
+ if want_trace
then
set +x
if test "$test_eval_ret_" != 0
test_cleanup=:
expecting_failure=$2
- if test "${GIT_TEST_CHAIN_LINT:-0}" != 0; then
+ if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then
+ # turn off tracing for this test-eval, as it simply creates
+ # confusing noise in the "-x" output
+ trace_tmp=$trace
+ trace=
# 117 is magic because it is unlikely to match the exit
# code of other programs
test_eval_ "(exit 117) && $1"
if test "$?" != 117; then
error "bug in the test script: broken &&-chain: $1"
fi
+ trace=$trace_tmp
fi
setup_malloc_check
# override all git executables in TEST_DIRECTORY/..
GIT_VALGRIND=$TEST_DIRECTORY/valgrind
mkdir -p "$GIT_VALGRIND"/bin
- for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
+ for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/t/helper/test-*
do
make_valgrind_symlink $file
done
error "You haven't built things yet, have you?"
}
-if ! test -x "$GIT_BUILD_DIR"/test-chmtime
+if ! test -x "$GIT_BUILD_DIR"/t/helper/test-chmtime
then
echo >&2 'You need to build test-chmtime:'
- echo >&2 'Run "make test-chmtime" in the source (toplevel) directory'
+ echo >&2 'Run "make t/helper/test-chmtime" in the source (toplevel) directory'
exit 1
fi
GNUPGHOME="$HOME/gnupg-home-not-used"
export HOME GNUPGHOME
-# run the tput tests *after* changing HOME (in case ncurses needs
-# ~/.terminfo for $TERM)
-test -n "${color+set}" || test "x$ORIGINAL_TERM" != "xdumb" && (
- TERM=$ORIGINAL_TERM &&
- export TERM &&
- test -t 1 &&
- tput bold >/dev/null 2>&1 &&
- tput setaf 1 >/dev/null 2>&1 &&
- tput sgr0 >/dev/null 2>&1
- ) &&
- color=t
-
-if test -n "$color"
-then
- say_color () {
- (
- TERM=$ORIGINAL_TERM
- export TERM
- case "$1" in
- error)
- tput bold; tput setaf 1;; # bold red
- skip)
- tput setaf 4;; # blue
- warn)
- tput setaf 3;; # brown/yellow
- pass)
- tput setaf 2;; # green
- info)
- tput setaf 6;; # cyan
- *)
- test -n "$quiet" && return;;
- esac
- shift
- printf "%s" "$*"
- tput sgr0
- echo
- )
- }
-else
- say_color() {
- test -z "$1" && test -n "$quiet" && return
- shift
- printf "%s\n" "$*"
- }
-fi
-
if test -z "$TEST_NO_CREATE_REPO"
then
test_create_repo "$TRASH_DIRECTORY"
y="$*"
fi
- while echo "$y"
+ i=0
+ while test $i -lt 99
do
- :
+ echo "$y"
+ i=$(($i+1))
done
}
test_lazy_prereq PIPE '
# test whether the filesystem supports FIFOs
case $(uname -s) in
- CYGWIN*)
+ CYGWIN*|MINGW*)
false
;;
*)
test "$uid" != 0
'
-# On a filesystem that lacks SANITY, a file can be deleted even if
-# the containing directory doesn't have write permissions, or a file
-# can be accessed even if the containing directory doesn't have read
-# or execute permissions, causing our tests that validate that Git
-# works sensibly in such situations.
+# SANITY is about "can you correctly predict what the filesystem would
+# do by only looking at the permission bits of the files and
+# directories?" A typical example of !SANITY is running the test
+# suite as root, where a test may expect "chmod -r file && cat file"
+# to fail because file is supposed to be unreadable after a successful
+# chmod. In an environment (i.e. combination of what filesystem is
+# being used and who is running the tests) that lacks SANITY, you may
+# be able to delete or create a file when the containing directory
+# doesn't have write permissions, or access a file even if the
+# containing directory doesn't have read or execute permissions.
+
test_lazy_prereq SANITY '
mkdir SANETESTD.1 SANETESTD.2 &&
chmod +w SANETESTD.1 SANETESTD.2 &&
>SANETESTD.1/x 2>SANETESTD.2/x &&
chmod -w SANETESTD.1 &&
+ chmod -r SANETESTD.1/x &&
chmod -rx SANETESTD.2 ||
error "bug in test sript: cannot prepare SANETESTD"
+ ! test -r SANETESTD.1/x &&
! rm SANETESTD.1/x && ! test -f SANETESTD.2/x
status=$?
}
test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true'
+
+build_option () {
+ git version --build-options |
+ sed -ne "s/^$1: //p"
+}
+
+test_lazy_prereq LONG_IS_64BIT '
+ test 8 -le "$(build_option sizeof-long)"
+'