# to protect the history!
#
-# Test that submodule contents are currently not updated when switching
-# between commits that change a submodule.
-test_submodule_switch () {
+# Internal function; use test_submodule_switch() or
+# test_submodule_forced_switch() instead.
+test_submodule_switch_common() {
command="$1"
######################### Appearing submodule #########################
# Switching to a commit letting a submodule appear creates empty dir ...
test_submodule_content sub1 origin/add_sub1
)
'
- # ... and doesn't care if it already exists ...
+ # ... and doesn't care if it already exists.
test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" '
prolog &&
reset_work_tree_to no_submodule &&
test_submodule_content sub1 origin/add_sub1
)
'
- # ... unless there is an untracked file in its place.
- test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" '
- prolog &&
- reset_work_tree_to no_submodule &&
- (
- cd submodule_update &&
- git branch -t add_sub1 origin/add_sub1 &&
- >sub1 &&
- test_must_fail $command add_sub1 &&
- test_superproject_content origin/no_submodule &&
- test_must_be_empty sub1
- )
- '
# Replacing a tracked file with a submodule produces an empty
# directory ...
test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" '
# submodule files with the newly checked out ones in the
# directory of the same name while it shouldn't.
RESULT="failure"
+ elif test "$KNOWN_FAILURE_FORCED_SWITCH_TESTS" = 1
+ then
+ # All existing tests that use test_submodule_forced_switch()
+ # require this.
+ RESULT="failure"
else
RESULT="success"
fi
test_submodule_content sub1 origin/modify_sub1
)
'
-
# Updating a submodule to an invalid sha1 doesn't update the
# submodule's work tree, subsequent update will fail
test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" '
'
}
-# Test that submodule contents are currently not updated when switching
-# between commits that change a submodule, but throwing away local changes in
+# Declares and invokes several tests that, in various situations, checks that
+# the provided transition function:
+# - succeeds in updating the worktree and index of a superproject to a target
+# commit, or fails atomically (depending on the test situation)
+# - if succeeds, the contents of submodule directories are unchanged
+# - if succeeds, once "git submodule update" is invoked, the contents of
+# submodule directories are updated
+#
+# If the command under test is known to not work with submodules in certain
+# conditions, set the appropriate KNOWN_FAILURE_* variable used in the tests
+# below to 1.
+#
+# Use as follows:
+#
+# my_func () {
+# target=$1
+# # Do something here that updates the worktree and index to match target,
+# # but not any submodule directories.
+# }
+# test_submodule_switch "my_func"
+test_submodule_switch () {
+ command="$1"
+ test_submodule_switch_common "$command"
+
+ # An empty directory does not prevent the creation of a submodule of
+ # the same name, but a file does.
+ test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" '
+ prolog &&
+ reset_work_tree_to no_submodule &&
+ (
+ cd submodule_update &&
+ git branch -t add_sub1 origin/add_sub1 &&
+ >sub1 &&
+ test_must_fail $command add_sub1 &&
+ test_superproject_content origin/no_submodule &&
+ test_must_be_empty sub1
+ )
+ '
+}
+
+# Same as test_submodule_switch(), except that throwing away local changes in
# the superproject is allowed.
test_submodule_forced_switch () {
command="$1"
- ######################### Appearing submodule #########################
- # Switching to a commit letting a submodule appear creates empty dir ...
- test_expect_success "$command: added submodule creates empty directory" '
+ KNOWN_FAILURE_FORCED_SWITCH_TESTS=1
+ test_submodule_switch_common "$command"
+
+ # When forced, a file in the superproject does not prevent creating a
+ # submodule of the same name.
+ test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
+ >sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
- test_dir_is_empty sub1 &&
- git submodule update --init --recursive &&
- test_submodule_content sub1 origin/add_sub1
+ test_dir_is_empty sub1
)
'
- # ... and doesn't care if it already exists ...
- test_expect_success "$command: added submodule leaves existing empty directory alone" '
+}
+
+# Test that submodule contents are correctly updated when switching
+# between commits that change a submodule.
+# Test that the following transitions are correctly handled:
+# (These tests are also above in the case where we expect no change
+# in the submodule)
+# - Updated submodule
+# - New submodule
+# - Removed submodule
+# - Directory containing tracked files replaced by submodule
+# - Submodule replaced by tracked files in directory
+# - Submodule replaced by tracked file with the same name
+# - tracked file replaced by submodule
+#
+# New test cases
+# - Removing a submodule with a git directory absorbs the submodules
+# git directory first into the superproject.
+
+# Internal function; use test_submodule_switch_recursing_with_args() or
+# test_submodule_forced_switch_recursing_with_args() instead.
+test_submodule_recursing_with_args_common() {
+ command="$1"
+
+ ######################### Appearing submodule #########################
+ # Switching to a commit letting a submodule appear checks it out ...
+ test_expect_success "$command: added submodule is checked out" '
prolog &&
- reset_work_tree_to no_submodule &&
+ reset_work_tree_to_interested no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
- mkdir sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
- test_dir_is_empty sub1 &&
- git submodule update --init --recursive &&
test_submodule_content sub1 origin/add_sub1
)
'
- # ... unless there is an untracked file in its place.
- test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
+ # ... ignoring an empty existing directory.
+ test_expect_success "$command: added submodule is checked out in empty dir" '
prolog &&
- reset_work_tree_to no_submodule &&
+ reset_work_tree_to_interested no_submodule &&
(
cd submodule_update &&
+ mkdir sub1 &&
git branch -t add_sub1 origin/add_sub1 &&
- >sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
- test_dir_is_empty sub1
+ test_submodule_content sub1 origin/add_sub1
)
'
- # Replacing a tracked file with a submodule produces an empty
- # directory ...
- test_expect_success "$command: replace tracked file with submodule creates empty directory" '
+ test_expect_success "$command: submodule branch is not changed, detach HEAD instead" '
prolog &&
- reset_work_tree_to replace_sub1_with_file &&
+ reset_work_tree_to_interested add_sub1 &&
+ (
+ cd submodule_update &&
+ git -C sub1 checkout -b keep_branch &&
+ git -C sub1 rev-parse HEAD >expect &&
+ git branch -t check-keep origin/modify_sub1 &&
+ $command check-keep &&
+ test_superproject_content origin/modify_sub1 &&
+ test_submodule_content sub1 origin/modify_sub1 &&
+ git -C sub1 rev-parse keep_branch >actual &&
+ test_cmp expect actual &&
+ test_must_fail git -C sub1 symbolic-ref HEAD
+ )
+ '
+
+ # Replacing a tracked file with a submodule produces a checked out submodule
+ test_expect_success "$command: replace tracked file with submodule checks out submodule" '
+ prolog &&
+ reset_work_tree_to_interested replace_sub1_with_file &&
(
cd submodule_update &&
git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
$command replace_file_with_sub1 &&
test_superproject_content origin/replace_file_with_sub1 &&
- test_dir_is_empty sub1 &&
- git submodule update --init --recursive &&
test_submodule_content sub1 origin/replace_file_with_sub1
)
'
- # ... as does removing a directory with tracked files with a
- # submodule.
+ # ... as does removing a directory with tracked files with a submodule.
test_expect_success "$command: replace directory with submodule" '
prolog &&
- reset_work_tree_to replace_sub1_with_directory &&
+ reset_work_tree_to_interested replace_sub1_with_directory &&
(
cd submodule_update &&
git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
$command replace_directory_with_sub1 &&
test_superproject_content origin/replace_directory_with_sub1 &&
- test_dir_is_empty sub1 &&
- git submodule update --init --recursive &&
test_submodule_content sub1 origin/replace_directory_with_sub1
)
'
######################## Disappearing submodule #######################
- # Removing a submodule doesn't remove its work tree ...
- test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
+ # Removing a submodule removes its work tree ...
+ test_expect_success "$command: removed submodule removes submodules working tree" '
prolog &&
- reset_work_tree_to add_sub1 &&
+ reset_work_tree_to_interested add_sub1 &&
(
cd submodule_update &&
git branch -t remove_sub1 origin/remove_sub1 &&
$command remove_sub1 &&
test_superproject_content origin/remove_sub1 &&
- test_submodule_content sub1 origin/add_sub1
+ ! test -e sub1
)
'
- # ... especially when it contains a .git directory.
- test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
+ # ... absorbing a .git directory along the way.
+ test_expect_success "$command: removed submodule absorbs submodules .git directory" '
prolog &&
- reset_work_tree_to add_sub1 &&
+ reset_work_tree_to_interested add_sub1 &&
(
cd submodule_update &&
git branch -t remove_sub1 origin/remove_sub1 &&
replace_gitfile_with_git_dir sub1 &&
+ rm -rf .git/modules &&
$command remove_sub1 &&
test_superproject_content origin/remove_sub1 &&
- test_git_directory_is_unchanged sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
- # Replacing a submodule with files in a directory must fail as the
- # submodule work tree isn't removed ...
- test_expect_failure "$command: replace submodule with a directory must fail" '
- prolog &&
- reset_work_tree_to add_sub1 &&
- (
- cd submodule_update &&
- git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
- test_must_fail $command replace_sub1_with_directory &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
- # ... especially when it contains a .git directory.
- test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" '
- prolog &&
- reset_work_tree_to add_sub1 &&
- (
- cd submodule_update &&
- git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
- replace_gitfile_with_git_dir sub1 &&
- test_must_fail $command replace_sub1_with_directory &&
- test_superproject_content origin/add_sub1 &&
- test_git_directory_is_unchanged sub1 &&
- test_submodule_content sub1 origin/add_sub1
+ ! test -e sub1 &&
+ test_git_directory_exists sub1
)
'
- # Replacing it with a file must fail as it could throw away any local
- # work tree changes ...
- test_expect_failure "$command: replace submodule with a file must fail" '
+
+ # Replacing it with a file ...
+ test_expect_success "$command: replace submodule with a file" '
prolog &&
- reset_work_tree_to add_sub1 &&
+ reset_work_tree_to_interested add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
- test_must_fail $command replace_sub1_with_file &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
+ $command replace_sub1_with_file &&
+ test_superproject_content origin/replace_sub1_with_file &&
+ test -f sub1
)
'
- # ... or even destroy unpushed parts of submodule history if that
- # still uses a .git directory.
- test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
+ RESULTDS=success
+ if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
+ then
+ RESULTDS=failure
+ fi
+ # ... must check its local work tree for untracked files
+ test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" '
prolog &&
- reset_work_tree_to add_sub1 &&
+ reset_work_tree_to_interested add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
- replace_gitfile_with_git_dir sub1 &&
+ : >sub1/untrackedfile &&
test_must_fail $command replace_sub1_with_file &&
test_superproject_content origin/add_sub1 &&
- test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
+ test -f sub1/untracked_file
)
'
########################## Modified submodule #########################
- # Updating a submodule sha1 doesn't update the submodule's work tree
- test_expect_success "$command: modified submodule does not update submodule work tree" '
+ # Updating a submodule sha1 updates the submodule's work tree
+ test_expect_success "$command: modified submodule updates submodule work tree" '
prolog &&
- reset_work_tree_to add_sub1 &&
+ reset_work_tree_to_interested add_sub1 &&
(
cd submodule_update &&
git branch -t modify_sub1 origin/modify_sub1 &&
$command modify_sub1 &&
test_superproject_content origin/modify_sub1 &&
- test_submodule_content sub1 origin/add_sub1 &&
- git submodule update &&
test_submodule_content sub1 origin/modify_sub1
)
'
# Updating a submodule to an invalid sha1 doesn't update the
- # submodule's work tree, subsequent update will fail
- test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
+ # superproject nor the submodule's work tree.
+ test_expect_success "$command: updating to a missing submodule commit fails" '
prolog &&
- reset_work_tree_to add_sub1 &&
+ reset_work_tree_to_interested add_sub1 &&
(
cd submodule_update &&
git branch -t invalid_sub1 origin/invalid_sub1 &&
- $command invalid_sub1 &&
- test_superproject_content origin/invalid_sub1 &&
- test_submodule_content sub1 origin/add_sub1 &&
- test_must_fail git submodule update &&
+ test_must_fail $command invalid_sub1 &&
+ test_superproject_content origin/add_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
- # Updating a submodule from an invalid sha1 doesn't update the
- # submodule's work tree, subsequent update will succeed
- test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" '
- prolog &&
- reset_work_tree_to invalid_sub1 &&
- (
- cd submodule_update &&
- git branch -t valid_sub1 origin/valid_sub1 &&
- $command valid_sub1 &&
- test_superproject_content origin/valid_sub1 &&
- test_dir_is_empty sub1 &&
- git submodule update --init --recursive &&
- test_submodule_content sub1 origin/valid_sub1
- )
- '
}
-# Test that submodule contents are correctly updated when switching
-# between commits that change a submodule.
-# Test that the following transitions are correctly handled:
-# (These tests are also above in the case where we expect no change
-# in the submodule)
-# - Updated submodule
-# - New submodule
-# - Removed submodule
-# - Directory containing tracked files replaced by submodule
-# - Submodule replaced by tracked files in directory
-# - Submodule replaced by tracked file with the same name
-# - tracked file replaced by submodule
+# Declares and invokes several tests that, in various situations, checks that
+# the provided Git command, when invoked with --recurse-submodules:
+# - succeeds in updating the worktree and index of a superproject to a target
+# commit, or fails atomically (depending on the test situation)
+# - if succeeds, the contents of submodule directories are updated
#
-# New test cases
-# - Removing a submodule with a git directory absorbs the submodules
-# git directory first into the superproject.
-
+# Specify the Git command so that "git $GIT_COMMAND --recurse-submodules"
+# works.
+#
+# If the command under test is known to not work with submodules in certain
+# conditions, set the appropriate KNOWN_FAILURE_* variable used in the tests
+# below to 1.
+#
+# Use as follows:
+#
+# test_submodule_switch_recursing_with_args "$GIT_COMMAND"
test_submodule_switch_recursing_with_args () {
cmd_args="$1"
command="git $cmd_args --recurse-submodules"
+ test_submodule_recursing_with_args_common "$command"
+
RESULTDS=success
if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
then
then
RESULTOI=failure
fi
- ######################### Appearing submodule #########################
- # Switching to a commit letting a submodule appear checks it out ...
- test_expect_success "$command: added submodule is checked out" '
- prolog &&
- reset_work_tree_to_interested no_submodule &&
- (
- cd submodule_update &&
- git branch -t add_sub1 origin/add_sub1 &&
- $command add_sub1 &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
- # ... ignoring an empty existing directory ...
- test_expect_success "$command: added submodule is checked out in empty dir" '
- prolog &&
- reset_work_tree_to_interested no_submodule &&
- (
- cd submodule_update &&
- mkdir sub1 &&
- git branch -t add_sub1 origin/add_sub1 &&
- $command add_sub1 &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
- # ... unless there is an untracked file in its place.
+ # Switching to a commit letting a submodule appear cannot override an
+ # untracked file.
test_expect_success "$command: added submodule doesn't remove untracked file with same name" '
prolog &&
reset_work_tree_to_interested no_submodule &&
test_submodule_content sub1 origin/add_sub1
)
'
- # Replacing a tracked file with a submodule produces a checked out submodule
- test_expect_success "$command: replace tracked file with submodule checks out submodule" '
- prolog &&
- reset_work_tree_to_interested replace_sub1_with_file &&
- (
- cd submodule_update &&
- git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
- $command replace_file_with_sub1 &&
- test_superproject_content origin/replace_file_with_sub1 &&
- test_submodule_content sub1 origin/replace_file_with_sub1
- )
- '
- # ... as does removing a directory with tracked files with a submodule.
- test_expect_success "$command: replace directory with submodule" '
- prolog &&
- reset_work_tree_to_interested replace_sub1_with_directory &&
- (
- cd submodule_update &&
- git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
- $command replace_directory_with_sub1 &&
- test_superproject_content origin/replace_directory_with_sub1 &&
- test_submodule_content sub1 origin/replace_directory_with_sub1
- )
- '
- ######################## Disappearing submodule #######################
- # Removing a submodule removes its work tree ...
- test_expect_success "$command: removed submodule removes submodules working tree" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t remove_sub1 origin/remove_sub1 &&
- $command remove_sub1 &&
- test_superproject_content origin/remove_sub1 &&
- ! test -e sub1
- )
- '
- # ... absorbing a .git directory along the way.
- test_expect_success "$command: removed submodule absorbs submodules .git directory" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t remove_sub1 origin/remove_sub1 &&
- replace_gitfile_with_git_dir sub1 &&
- rm -rf .git/modules &&
- $command remove_sub1 &&
- test_superproject_content origin/remove_sub1 &&
- ! test -e sub1 &&
- test_git_directory_exists sub1
- )
- '
# Replacing a submodule with files in a directory must succeeds
# when the submodule is clean
test_expect_$RESULTDS "$command: replace submodule with a directory" '
)
'
- # Replacing it with a file ...
- test_expect_success "$command: replace submodule with a file" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
- $command replace_sub1_with_file &&
- test_superproject_content origin/replace_sub1_with_file &&
- test -f sub1
- )
- '
-
- # ... must check its local work tree for untracked files
- test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
- : >sub1/untrackedfile &&
- test_must_fail $command replace_sub1_with_file &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
-
# ... and ignored files are ignored
test_expect_success "$command: replace submodule with a file works ignores ignored files in submodule" '
test_when_finished "rm submodule_update/.git/modules/sub1/info/exclude" &&
)
'
- ########################## Modified submodule #########################
- # Updating a submodule sha1 updates the submodule's work tree
- test_expect_success "$command: modified submodule updates submodule work tree" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t modify_sub1 origin/modify_sub1 &&
- $command modify_sub1 &&
- test_superproject_content origin/modify_sub1 &&
- test_submodule_content sub1 origin/modify_sub1
- )
- '
-
test_expect_success "git -c submodule.recurse=true $cmd_args: modified submodule updates submodule work tree" '
prolog &&
reset_work_tree_to_interested add_sub1 &&
)
'
- # Updating a submodule to an invalid sha1 doesn't update the
- # superproject nor the submodule's work tree.
- test_expect_success "$command: updating to a missing submodule commit fails" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t invalid_sub1 origin/invalid_sub1 &&
- test_must_fail $command invalid_sub1 &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
-
# recursing deeper than one level doesn't work yet.
test_expect_success "$command: modified submodule updates submodule recursively" '
prolog &&
'
}
-# Test that submodule contents are updated when switching between commits
-# that change a submodule, but throwing away local changes in
-# the superproject as well as the submodule is allowed.
+# Same as test_submodule_switch_recursing_with_args(), except that throwing
+# away local changes in the superproject is allowed.
test_submodule_forced_switch_recursing_with_args () {
cmd_args="$1"
command="git $cmd_args --recurse-submodules"
+ test_submodule_recursing_with_args_common "$command"
+
RESULT=success
if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
then
RESULT=failure
fi
- ######################### Appearing submodule #########################
- # Switching to a commit letting a submodule appear creates empty dir ...
- test_expect_success "$command: added submodule is checked out" '
- prolog &&
- reset_work_tree_to_interested no_submodule &&
- (
- cd submodule_update &&
- git branch -t add_sub1 origin/add_sub1 &&
- $command add_sub1 &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
- # ... and doesn't care if it already exists ...
- test_expect_success "$command: added submodule ignores empty directory" '
- prolog &&
- reset_work_tree_to_interested no_submodule &&
- (
- cd submodule_update &&
- git branch -t add_sub1 origin/add_sub1 &&
- mkdir sub1 &&
- $command add_sub1 &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
- # ... not caring about an untracked file either
+ # Switching to a commit letting a submodule appear does not care about
+ # an untracked file.
test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
prolog &&
reset_work_tree_to_interested no_submodule &&
test_submodule_content sub1 origin/add_sub1
)
'
- # Replacing a tracked file with a submodule checks out the submodule
- test_expect_success "$command: replace tracked file with submodule populates the submodule" '
- prolog &&
- reset_work_tree_to_interested replace_sub1_with_file &&
- (
- cd submodule_update &&
- git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
- $command replace_file_with_sub1 &&
- test_superproject_content origin/replace_file_with_sub1 &&
- test_submodule_content sub1 origin/replace_file_with_sub1
- )
- '
- # ... as does removing a directory with tracked files with a
- # submodule.
- test_expect_success "$command: replace directory with submodule" '
- prolog &&
- reset_work_tree_to_interested replace_sub1_with_directory &&
- (
- cd submodule_update &&
- git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
- $command replace_directory_with_sub1 &&
- test_superproject_content origin/replace_directory_with_sub1 &&
- test_submodule_content sub1 origin/replace_directory_with_sub1
- )
- '
- ######################## Disappearing submodule #######################
- # Removing a submodule doesn't remove its work tree ...
- test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t remove_sub1 origin/remove_sub1 &&
- $command remove_sub1 &&
- test_superproject_content origin/remove_sub1 &&
- ! test -e sub1
- )
- '
- # ... especially when it contains a .git directory.
- test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t remove_sub1 origin/remove_sub1 &&
- replace_gitfile_with_git_dir sub1 &&
- rm -rf .git/modules/sub1 &&
- $command remove_sub1 &&
- test_superproject_content origin/remove_sub1 &&
- test_git_directory_exists sub1 &&
- ! test -e sub1
- )
- '
# Replacing a submodule with files in a directory ...
test_expect_success "$command: replace submodule with a directory" '
prolog &&
test_git_directory_exists sub1
)
'
- # Replacing it with a file
- test_expect_success "$command: replace submodule with a file" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
- $command replace_sub1_with_file &&
- test_superproject_content origin/replace_sub1_with_file
- )
- '
# ... even if the submodule contains ignored files
test_expect_success "$command: replace submodule with a file ignoring ignored files" '
)
'
- # ... but stops for untracked files that would be lost
- test_expect_$RESULT "$command: replace submodule with a file stops for untracked files" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
- : >sub1/untracked_file &&
- test_must_fail $command replace_sub1_with_file &&
- test_superproject_content origin/add_sub1 &&
- test -f sub1/untracked_file
- )
- '
-
- ########################## Modified submodule #########################
- # Updating a submodule sha1 updates the submodule's work tree
- test_expect_success "$command: modified submodule updates submodule work tree" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t modify_sub1 origin/modify_sub1 &&
- $command modify_sub1 &&
- test_superproject_content origin/modify_sub1 &&
- test_submodule_content sub1 origin/modify_sub1
- )
- '
- # Updating a submodule to an invalid sha1 doesn't update the
- # submodule's work tree, subsequent update will fail
- test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
- prolog &&
- reset_work_tree_to_interested add_sub1 &&
- (
- cd submodule_update &&
- git branch -t invalid_sub1 origin/invalid_sub1 &&
- test_must_fail $command invalid_sub1 &&
- test_superproject_content origin/add_sub1 &&
- test_submodule_content sub1 origin/add_sub1
- )
- '
# Updating a submodule from an invalid sha1 updates
test_expect_success "$command: modified submodule does update submodule work tree from invalid commit" '
prolog &&