A boolean to enable/disable color in the output of
linkgit:git-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
linkgit:git-log[1], and linkgit:git-show[1] will use color
for all patches. If it is set to `true` or `auto`, those
commands will only use color when output is to the terminal.
- Defaults to false.
+ If unset, then the value of `color.ui` is used (`auto` by
+ default).
+
This does not affect linkgit:git-format-patch[1] or the
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
color.grep::
When set to `always`, always highlight matches. When `false` (or
`never`), never. When set to `true` or `auto`, use color only
- when the output is written to the terminal. Defaults to `false`.
+ when the output is written to the terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.grep.<slot>::
Use customized color for grep colorization. `<slot>` specifies which
and displays (such as those used by "git-add --interactive" and
"git-clean --interactive"). When false (or `never`), never.
When set to `true` or `auto`, use colors only when the output is
- to the terminal. Defaults to false.
+ to the terminal. If unset, then the value of `color.ui` is
+ used (`auto` by default).
color.interactive.<slot>::
Use customized color for 'git add --interactive' and 'git clean
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.status.<slot>::
Use customized color for status colorization. `<slot>` is
gc.aggressiveDepth::
The depth parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
- to 250.
+ to 50.
gc.aggressiveWindow::
The window size parameter used in the delta compression
Override the grace period with this config variable. The value
"now" may be used to disable this grace period and always prune
unreachable objects immediately, or "never" may be used to
- suppress pruning.
+ suppress pruning. This feature helps prevent corruption when
+ 'git gc' runs concurrently with another process writing to the
+ repository; see the "NOTES" section of linkgit:git-gc[1].
gc.worktreePruneExpire::
When 'git gc' is run, it calls
a username in the URL, as libcurl normally requires a username for
authentication.
+http.delegation::
+ Control GSSAPI credential delegation. The delegation is disabled
+ by default in libcurl since version 7.21.7. Set parameter to tell
+ the server what it is allowed to delegate when it comes to user
+ credentials. Used with GSS/kerberos. Possible values are:
++
+--
+* `none` - Don't allow any delegation.
+* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
+ Kerberos service ticket, which is a matter of realm policy.
+* `always` - Unconditionally allow the server to delegate.
+--
+
+
http.extraHeader::
Pass an additional HTTP header when communicating with a server. If
more than one such entry exists, all of them are added as extra
of common USER_AGENT strings (but not including those like git/1.7.1).
Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.
+http.followRedirects::
+ Whether git should follow HTTP redirects. If set to `true`, git
+ will transparently follow any redirect issued by a server it
+ encounters. If set to `false`, git will treat all redirects as
+ errors. If set to `initial`, git will follow redirects only for
+ the initial request to a remote, but not for subsequent
+ follow-up HTTP requests. Since git uses the redirected URL as
+ the base for the follow-up requests, this is generally
+ sufficient. The default is `initial`.
+
http.<url>.*::
Any of the http.* options above can be applied selectively to some URLs.
For a config key to match a URL, each element of the config key is
Note that an alias with the same name as a built-in format
will be silently ignored.
+protocol.allow::
+ If set, provide a user defined default policy for all protocols which
+ don't explicitly have a policy (`protocol.<name>.allow`). By default,
+ if unset, known-safe protocols (http, https, git, ssh, file) have a
+ default policy of `always`, known-dangerous protocols (ext) have a
+ default policy of `never`, and all other protocols have a default
+ policy of `user`. Supported policies:
++
+--
+
+* `always` - protocol is always able to be used.
+
+* `never` - protocol is never able to be used.
+
+* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
+ either unset or has a value of 1. This policy should be used when you want a
+ protocol to be directly usable by the user but don't want it used by commands which
+ execute clone/fetch/push commands without user input, e.g. recursive
+ submodule initialization.
+
+--
+
+protocol.<name>.allow::
+ Set a policy to be used by protocol `<name>` with clone/fetch/push
+ commands. See `protocol.allow` above for the available policies.
++
+The protocol names currently used by git are:
++
+--
+ - `file`: any local file-based path (including `file://` URLs,
+ or local paths)
+
+ - `git`: the anonymous git protocol over a direct TCP
+ connection (or proxy, if configured)
+
+ - `ssh`: git over ssh (including `host:path` syntax,
+ `ssh://`, etc).
+
+ - `http`: git over http, both "smart http" and "dumb http".
+ Note that this does _not_ include `https`; if you want to configure
+ both, you must do so individually.
+
+ - any external helpers are named by their protocol (e.g., use
+ `hg` to allow the `git-remote-hg` helper)
+--
+
pull.ff::
By default, Git does not create an extra merge commit when merging
a commit that is a descendant of the current commit. Instead, the
command in the todo-list.
Defaults to "ignore".
-rebase.instructionFormat
+rebase.instructionFormat::
A format string, as specified in linkgit:git-log[1], to be used for
the instruction list during an interactive rebase. The format will automatically
have the long commit hash prepended to the format.
option will show diffstat of the stash. Defaults to true.
See description of 'show' command in linkgit:git-stash[1].
-submodule.<name>.path::
submodule.<name>.url::
- The path within this project and URL for a submodule. These
- variables are initially populated by 'git submodule init'. See
- linkgit:git-submodule[1] and linkgit:gitmodules[5] for
- details.
+ The URL for a submodule. This variable is copied from the .gitmodules
+ file to the git config via 'git submodule init'. The user can change
+ the configured URL before obtaining the submodule via 'git submodule
+ update'. After obtaining the submodule, the presence of this variable
+ is used as a sign whether the submodule is of interest to git commands.
+ See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
submodule.<name>.update::
The default update procedure for a submodule. This variable
`refs/namespaces/bar/refs/heads/master` are still advertised as so-called
"have" lines. In order to match refs before stripping, add a `^` in front of
the ref name. If you combine `!` and `^`, `!` must be specified first.
++
+Even if you hide refs, a client may still be able to steal the target
+objects via the techniques described in the "SECURITY" section of the
+linkgit:gitnamespaces[7] man page; it's best to keep private data in a
+separate repository.
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
uploadarchive.allowUnreachable::
If true, allow clients to use `git archive --remote` to request
any tree, whether reachable from the ref tips or not. See the
- discussion in the `SECURITY` section of
+ discussion in the "SECURITY" section of
linkgit:git-upload-archive[1] for more details. Defaults to
`false`.
When `uploadpack.hideRefs` is in effect, allow `upload-pack`
to accept a fetch request that asks for an object at the tip
of a hidden ref (by default, such a request is rejected).
- see also `uploadpack.hideRefs`.
+ See also `uploadpack.hideRefs`. Even if this is false, a client
+ may be able to steal objects via the techniques described in the
+ "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's
+ best to keep private data in a separate repository.
uploadpack.allowReachableSHA1InWant::
Allow `upload-pack` to accept a fetch request that asks for an
object that is reachable from any ref tip. However, note that
calculating object reachability is computationally expensive.
+ Defaults to `false`. Even if this is false, a client may be able
+ to steal objects via the techniques described in the "SECURITY"
+ section of the linkgit:gitnamespaces[7] man page; it's best to
+ keep private data in a separate repository.
+
+uploadpack.allowAnySHA1InWant::
+ Allow `upload-pack` to accept a fetch request that asks for any
+ object at all.
Defaults to `false`.
uploadpack.keepAlive::