----
git-cvsserver - A CVS server emulator for git
-
SYNOPSIS
--------
+
+SSH:
+
[verse]
-export CVS_SERVER=git-cvsserver
+export CVS_SERVER="git cvsserver"
'cvs' -d :ext:user@server/path/repo.git co <HEAD_name>
+pserver (/etc/inetd.conf):
+
+[verse]
+cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver
+
+Usage:
+
+[verse]
+'git-cvsserver' [options] [pserver|server] [<directory> ...]
+
+OPTIONS
+-------
+
+All these options obviously only make sense if enforced by the server side.
+They have been implemented to resemble the linkgit:git-daemon[1] options as
+closely as possible.
+
+--base-path <path>::
+Prepend 'path' to requested CVSROOT
+
+--strict-paths::
+Don't allow recursing into subdirectories
+
+--export-all::
+Don't check for `gitcvs.enabled` in config. You also have to specify a list
+of allowed directories (see below) if you want to use this option.
+
+-V::
+--version::
+Print version information and exit
+
+-h::
+-H::
+--help::
+Print usage information and exit
+
+<directory>::
+You can specify a list of allowed directories. If no directories
+are given, all are allowed. This is an additional restriction, gitcvs
+access still needs to be enabled by the `gitcvs.enabled` config option
+unless '--export-all' was given, too.
+
DESCRIPTION
-----------
LIMITATIONS
-----------
-Currently gitcvs only works over ssh connections.
+CVS clients cannot tag, branch or perform GIT merges.
+
+'git-cvsserver' maps GIT branches to CVS modules. This is very different
+from what most CVS users would expect since in CVS modules usually represent
+one or more directories.
INSTALLATION
------------
-1. Put server.pl somewhere useful on the same machine that is hosting your git repos
+1. If you are going to offer CVS access via pserver, add a line in
+ /etc/inetd.conf like
++
+--
+------
+ cvspserver stream tcp nowait nobody git-cvsserver pserver
+
+------
+Note: Some inetd servers let you specify the name of the executable
+independently of the value of argv[0] (i.e. the name the program assumes
+it was executed with). In this case the correct line in /etc/inetd.conf
+looks like
+
+------
+ cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver
+
+------
+
+Only anonymous access is provided by pserve by default. To commit you
+will have to create pserver accounts, simply add a gitcvs.authdb
+setting in the config file of the repositories you want the cvsserver
+to allow writes to, for example:
+
+------
+
+ [gitcvs]
+ authdb = /etc/cvsserver/passwd
+
+------
+The format of these files is username followed by the crypted password,
+for example:
+
+------
+ myuser:$1Oyx5r9mdGZ2
+ myuser:$1$BA)@$vbnMJMDym7tA32AamXrm./
+------
+You can use the 'htpasswd' facility that comes with Apache to make these
+files, but Apache's MD5 crypt method differs from the one used by most C
+library's crypt() function, so don't use the -m option.
+
+Alternatively you can produce the password with perl's crypt() operator:
+-----
+ perl -e 'my ($user, $pass) = @ARGV; printf "%s:%s\n", $user, crypt($user, $pass)' $USER password
+-----
+
+Then provide your password via the pserver method, for example:
+------
+ cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name>
+------
+No special setup is needed for SSH access, other than having GIT tools
+in the PATH. If you have clients that do not accept the CVS_SERVER
+environment variable, you can rename 'git-cvsserver' to `cvs`.
+
+Note: Newer CVS versions (>= 1.12.11) also support specifying
+CVS_SERVER directly in CVSROOT like
+
+------
+cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name>
+------
+This has the advantage that it will be saved in your 'CVS/Root' files and
+you don't need to worry about always setting the correct environment
+variable. SSH users restricted to 'git-shell' don't need to override the default
+with CVS_SERVER (and shouldn't) as 'git-shell' understands `cvs` to mean
+'git-cvsserver' and pretends that the other end runs the real 'cvs' better.
+--
2. For each repo that you want accessible from CVS you need to edit config in
the repo and add the following section.
-
++
+--
+------
[gitcvs]
enabled=1
+ # optional for debugging
logfile=/path/to/logfile
- n.b. you need to ensure each user that is going to invoke server.pl has
- write access to the log file.
+------
+Note: you need to ensure each user that is going to invoke 'git-cvsserver' has
+write access to the log file and to the database (see
+<<dbbackend,Database Backend>>. If you want to offer write access over
+SSH, the users of course also need write access to the git repository itself.
+
+You also need to ensure that each repository is "bare" (without a git index
+file) for `cvs commit` to work. See linkgit:gitcvs-migration[7].
+
+[[configaccessmethod]]
+All configuration variables can also be overridden for a specific method of
+access. Valid method names are "ext" (for SSH access) and "pserver". The
+following example configuration would disable pserver access while still
+allowing access over SSH.
+------
+ [gitcvs]
+ enabled=0
+
+ [gitcvs "ext"]
+ enabled=1
+------
+--
+3. If you didn't specify the CVSROOT/CVS_SERVER directly in the checkout command,
+ automatically saving it in your 'CVS/Root' files, then you need to set them
+ explicitly in your environment. CVSROOT should be set as per normal, but the
+ directory should point at the appropriate git repo. As above, for SSH clients
+ _not_ restricted to 'git-shell', CVS_SERVER should be set to 'git-cvsserver'.
++
+--
+------
+ export CVSROOT=:ext:user@server:/var/git/project.git
+ export CVS_SERVER="git cvsserver"
+------
+--
+4. For SSH clients that will make commits, make sure their server-side
+ .ssh/environment files (or .bashrc, etc., according to their specific shell)
+ export appropriate values for GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL,
+ GIT_COMMITTER_NAME, and GIT_COMMITTER_EMAIL. For SSH clients whose login
+ shell is bash, .bashrc may be a reasonable alternative.
+
+5. Clients should now be able to check out the project. Use the CVS 'module'
+ name to indicate what GIT 'head' you want to check out. This also sets the
+ name of your newly checked-out directory, unless you tell it otherwise with
+ `-d <dir_name>`. For example, this checks out 'master' branch to the
+ `project-master` directory:
++
+------
+ cvs co -d project-master master
+------
+
+[[dbbackend]]
+Database Backend
+----------------
+
+'git-cvsserver' uses one database per git head (i.e. CVS module) to
+store information about the repository to maintain consistent
+CVS revision numbers. The database needs to be
+updated (i.e. written to) after every commit.
+
+If the commit is done directly by using `git` (as opposed to
+using 'git-cvsserver') the update will need to happen on the
+next repository access by 'git-cvsserver', independent of
+access method and requested operation.
+
+That means that even if you offer only read access (e.g. by using
+the pserver method), 'git-cvsserver' should have write access to
+the database to work reliably (otherwise you need to make sure
+that the database is up-to-date any time 'git-cvsserver' is executed).
+
+By default it uses SQLite databases in the git directory, named
+`gitcvs.<module_name>.sqlite`. Note that the SQLite backend creates
+temporary files in the same directory as the database file on
+write so it might not be enough to grant the users using
+'git-cvsserver' write access to the database file without granting
+them write access to the directory, too.
+
+The database can not be reliably regenerated in a
+consistent form after the branch it is tracking has changed.
+Example: For merged branches, 'git-cvsserver' only tracks
+one branch of development, and after a 'git merge' an
+incrementally updated database may track a different branch
+than a database regenerated from scratch, causing inconsistent
+CVS revision numbers. `git-cvsserver` has no way of knowing which
+branch it would have picked if it had been run incrementally
+pre-merge. So if you have to fully or partially (from old
+backup) regenerate the database, you should be suspicious
+of pre-existing CVS sandboxes.
+
+You can configure the database backend with the following
+configuration variables:
+
+Configuring database backend
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'git-cvsserver' uses the Perl DBI module. Please also read
+its documentation if changing these variables, especially
+about `DBI->connect()`.
+
+gitcvs.dbname::
+ Database name. The exact meaning depends on the
+ selected database driver, for SQLite this is a filename.
+ Supports variable substitution (see below). May
+ not contain semicolons (`;`).
+ Default: '%Ggitcvs.%m.sqlite'
+
+gitcvs.dbdriver::
+ Used DBI driver. You can specify any available driver
+ for this here, but it might not work. cvsserver is tested
+ with 'DBD::SQLite', reported to work with
+ 'DBD::Pg', and reported *not* to work with 'DBD::mysql'.
+ Please regard this as an experimental feature. May not
+ contain colons (`:`).
+ Default: 'SQLite'
+
+gitcvs.dbuser::
+ Database user. Only useful if setting `dbdriver`, since
+ SQLite has no concept of database users. Supports variable
+ substitution (see below).
+
+gitcvs.dbpass::
+ Database password. Only useful if setting `dbdriver`, since
+ SQLite has no concept of database passwords.
+
+gitcvs.dbTableNamePrefix::
+ Database table name prefix. Supports variable substitution
+ (see below). Any non-alphabetic characters will be replaced
+ with underscores.
+
+All variables can also be set per access method, see <<configaccessmethod,above>>.
+
+Variable substitution
+^^^^^^^^^^^^^^^^^^^^^
+In `dbdriver` and `dbuser` you can use the following variables:
+
+%G::
+ git directory name
+%g::
+ git directory name, where all characters except for
+ alpha-numeric ones, `.`, and `-` are replaced with
+ `_` (this should make it easier to use the directory
+ name in a filename if wanted)
+%m::
+ CVS module/git head name
+%a::
+ access method (one of "ext" or "pserver")
+%u::
+ Name of the user running 'git-cvsserver'.
+ If no name can be determined, the
+ numeric uid is used.
+
+ENVIRONMENT
+-----------
-5. On each client machine you need to set the following variables.
- CVSROOT should be set as per normal, but the directory should point at the
- appropriate git repo.
- CVS_SERVER should be set to the server.pl script that has been put on the
- remote machine.
+These variables obviate the need for command-line options in some
+circumstances, allowing easier restricted usage through git-shell.
-6. Clients should now be able to check out modules (where modules are the names
- of branches in git).
- $ cvs co -d mylocaldir master
+GIT_CVSSERVER_BASE_PATH takes the place of the argument to --base-path.
+
+GIT_CVSSERVER_ROOT specifies a single-directory whitelist. The
+repository must still be configured to allow access through
+git-cvsserver, as described above.
+
+When these environment variables are set, the corresponding
+command-line arguments may not be used.
Eclipse CVS Client Notes
------------------------
To get a checkout with the Eclipse CVS client:
-1. Create a new project from CVS checkout, giving it repository and module
-2. Context Menu->Team->Share Project...
-3. Enter the repository and module information again and click Finish
-4. The Synchronize view appears. Untick "launch commit wizard" to avoid
-committing the .project file, and select HEAD as the tag to synchronize to.
-Update all incoming changes.
-
-Note that most versions of Eclipse ignore CVS_SERVER (which you can set in
-the Preferences->Team->CVS->ExtConnection pane), so you may have to
-rename, alias or symlink git-cvsserver to 'cvs' on the server.
+1. Select "Create a new project -> From CVS checkout"
+2. Create a new location. See the notes below for details on how to choose the
+ right protocol.
+3. Browse the 'modules' available. It will give you a list of the heads in
+ the repository. You will not be able to browse the tree from there. Only
+ the heads.
+4. Pick 'HEAD' when it asks what branch/tag to check out. Untick the
+ "launch commit wizard" to avoid committing the .project file.
+
+Protocol notes: If you are using anonymous access via pserver, just select that.
+Those using SSH access should choose the 'ext' protocol, and configure 'ext'
+access on the Preferences->Team->CVS->ExtConnection pane. Set CVS_SERVER to
+"`git cvsserver`". Note that password support is not good when using 'ext',
+you will definitely want to have SSH keys setup.
+
+Alternatively, you can just use the non-standard extssh protocol that Eclipse
+offer. In that case CVS_SERVER is ignored, and you will have to replace
+the cvs utility on the server with 'git-cvsserver' or manipulate your `.bashrc`
+so that calling 'cvs' effectively calls 'git-cvsserver'.
Clients known to work
---------------------
-CVS 1.12.9 on Debian
-CVS 1.11.17 on MacOSX (from Fink package)
-Eclipse 3.0, 3.1.2 on MacOSX (see Eclipse CVS Client Notes)
-TortoiseCVS
+- CVS 1.12.9 on Debian
+- CVS 1.11.17 on MacOSX (from Fink package)
+- Eclipse 3.0, 3.1.2 on MacOSX (see Eclipse CVS Client Notes)
+- TortoiseCVS
Operations supported
--------------------
Legacy monitoring operations are not supported (edit, watch and related).
Exports and tagging (tags and branches) are not supported at this stage.
-The server will set the -k mode to binary when relevant. In proper GIT
-tradition, the contents of the files are always respected.
-No keyword expansion or newline munging is supported.
+CRLF Line Ending Conversions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Dependencies
-------------
+By default the server leaves the '-k' mode blank for all files,
+which causes the CVS client to treat them as a text files, subject
+to end-of-line conversion on some platforms.
-git-cvsserver depends on DBD::SQLite.
+You can make the server use the end-of-line conversion attributes to
+set the '-k' modes for files by setting the `gitcvs.usecrlfattr`
+config variable. See linkgit:gitattributes[5] for more information
+about end-of-line conversion.
-Copyright and Authors
----------------------
-
-This program is copyright The Open University UK - 2006.
+Alternatively, if `gitcvs.usecrlfattr` config is not enabled
+or the attributes do not allow automatic detection for a filename, then
+the server uses the `gitcvs.allbinary` config for the default setting.
+If `gitcvs.allbinary` is set, then file not otherwise
+specified will default to '-kb' mode. Otherwise the '-k' mode
+is left blank. But if `gitcvs.allbinary` is set to "guess", then
+the correct '-k' mode will be guessed based on the contents of
+the file.
-Authors: Martyn Smith <martyn@catalyst.net.nz>
- Martin Langhoff <martin@catalyst.net.nz>
- with ideas and patches from participants of the git-list <git@vger.kernel.org>.
+For best consistency with 'cvs', it is probably best to override the
+defaults by setting `gitcvs.usecrlfattr` to true,
+and `gitcvs.allbinary` to "guess".
-Documentation
---------------
-Documentation by Martyn Smith <martyn@catalyst.net.nz> and Martin Langhoff <martin@catalyst.net.nz>Matthias Urlichs <smurf@smurf.noris.de>.
+Dependencies
+------------
+'git-cvsserver' depends on DBD::SQLite.
GIT
---
-Part of the gitlink:git[7] suite
+Part of the linkgit:git[1] suite