------------------
The git configuration file contains a number of variables that affect
-the git command's behavior. `.git/config` file for each repository
-is used to store the information for that repository, and
-`$HOME/.gitconfig` is used to store per user information to give
-fallback values for `.git/config` file. The file `/etc/gitconfig`
-can be used to store system-wide defaults.
-
-They can be used by both the git plumbing
-and the porcelains. The variables are divided into sections, where
-in the fully qualified variable name the variable itself is the last
+the git command's behavior. The `.git/config` file in each repository
+is used to store the configuration for that repository, and
+`$HOME/.gitconfig` is used to store a per-user configuration as
+fallback values for the `.git/config` file. The file `/etc/gitconfig`
+can be used to store a system-wide default configuration.
+
+The configuration variables are used by both the git plumbing
+and the porcelains. The variables are divided into sections, wherein
+the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive and only alphanumeric
characters are allowed. Some variables may appear multiple times.
The file consists of sections and variables. A section begins with
the name of the section in square brackets and continues until the next
section begins. Section names are not case sensitive. Only alphanumeric
-characters, '`-`' and '`.`' are allowed in section names. Each variable
-must belong to some section, which means that there must be section
-header before first setting of a variable.
+characters, `-` and `.` are allowed in section names. Each variable
+must belong to some section, which means that there must be a section
+header before the first setting of a variable.
Sections can be further divided into subsections. To begin a subsection
put its name in double quotes, separated by space from the section name,
-in the section header, like in example below:
+in the section header, like in the example below:
--------
[section "subsection"]
--------
-Subsection names can contain any characters except newline (doublequote
-'`"`' and backslash have to be escaped as '`\"`' and '`\\`',
-respectively) and are case sensitive. Section header cannot span multiple
+Subsection names are case sensitive and can contain any characters except
+newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`,
+respectively). Section headers cannot span multiple
lines. Variables may belong directly to a section or to a given subsection.
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
-There is also (case insensitive) alternative `[section.subsection]` syntax.
-In this syntax subsection names follow the same restrictions as for section
-name.
+There is also a case insensitive alternative `[section.subsection]` syntax.
+In this syntax, subsection names follow the same restrictions as for section
+names.
-All the other lines are recognized as setting variables, in the form
+All the other lines (and the remainder of the line after the section
+header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
The variable names are case-insensitive and only alphanumeric
-characters and '`-`' are allowed. There can be more than one value
+characters and `-` are allowed. There can be more than one value
for a given variable; we say then that variable is multivalued.
Leading and trailing whitespace in a variable value is discarded.
The values following the equals sign in variable assign are all either
a string, an integer, or a boolean. Boolean values may be given as yes/no,
-0/1 or true/false. Case is not significant in boolean values, when
+1/0, true/false or on/off. Case is not significant in boolean values, when
converting value to the canonical form using '--bool' type specifier;
-'git-config' will ensure that the output is "true" or "false".
+'git config' will ensure that the output is "true" or "false".
String values may be entirely or partially enclosed in double quotes.
-You need to enclose variable value in double quotes if you want to
-preserve leading or trailing whitespace, or if variable value contains
-beginning of comment characters (if it contains '#' or ';').
-Double quote '`"`' and backslash '`\`' characters in variable value must
-be escaped: use '`\"`' for '`"`' and '`\\`' for '`\`'.
-
-The following escape sequences (beside '`\"`' and '`\\`') are recognized:
-'`\n`' for newline character (NL), '`\t`' for horizontal tabulation (HT, TAB)
-and '`\b`' for backspace (BS). No other char escape sequence, nor octal
+You need to enclose variable values in double quotes if you want to
+preserve leading or trailing whitespace, or if the variable value contains
+comment characters (i.e. it contains '#' or ';').
+Double quote `"` and backslash `\` characters in variable values must
+be escaped: use `\"` for `"` and `\\` for `\`.
+
+The following escape sequences (beside `\"` and `\\`) are recognized:
+`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
+and `\b` for backspace (BS). No other char escape sequence, nor octal
char sequences are valid.
-Variable value ending in a '`\`' is continued on the next line in the
+Variable values ending in a `\` are continued on the next line in the
customary UNIX fashion.
-Some variables may require special value format.
+Some variables may require a special value format.
Example
~~~~~~~
in the appropriate manual page. You will find a description of non-core
porcelain configuration variables in the respective porcelain documentation.
+advice.*::
+ When set to 'true', display the given optional help message.
+ When set to 'false', do not display. The configuration variables
+ are:
++
+--
+ pushNonFastForward::
+ Advice shown when linkgit:git-push[1] refuses
+ non-fast-forward refs. Default: true.
+ statusHints::
+ Directions on how to stage/unstage/add shown in the
+ output of linkgit:git-status[1] and the template shown
+ when writing commit messages. Default: true.
+ commitBeforeMerge::
+ Advice shown when linkgit:git-merge[1] refuses to
+ merge to avoid overwriting local changes.
+ Default: true.
+ resolveConflict::
+ Advices shown by various commands when conflicts
+ prevent the operation from being performed.
+ Default: true.
+ implicitIdentity::
+ Advice on how to set your identity configuration when
+ your information is guessed from the system username and
+ domain name. Default: true.
+
+ detachedHead::
+ Advice shown when you used linkgit::git-checkout[1] to
+ move to the detach HEAD state, to instruct how to create
+ a local branch after the fact. Default: true.
+--
+
core.fileMode::
If false, the executable bit differences between the index and
the working copy are ignored; useful on broken filesystems like FAT.
- See linkgit:git-update-index[1]. True by default.
+ See linkgit:git-update-index[1].
++
+The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
+will probe and set core.fileMode false if appropriate when the
+repository is created.
+
+core.ignoreCygwinFSTricks::
+ This option is only used by Cygwin implementation of Git. If false,
+ the Cygwin stat() and lstat() functions are used. This may be useful
+ if your repository consists of a few separate directories joined in
+ one hierarchy using Cygwin mount. If true, Git uses native Win32 API
+ whenever it is possible and falls back to Cygwin functions only to
+ handle symbol links. The native mode is more than twice faster than
+ normal Cygwin l/stat() functions. True by default, unless core.filemode
+ is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's
+ POSIX emulation is required to support core.filemode.
+
+core.ignorecase::
+ If true, this option enables various workarounds to enable
+ git to work better on filesystems that are not case sensitive,
+ like FAT. For example, if a directory listing finds
+ "makefile" when git expects "Makefile", git will assume
+ it is really the same file, and continue to remember it as
+ "Makefile".
++
+The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
+will probe and set core.ignorecase true if appropriate when the repository
+is created.
core.trustctime::
If false, the ctime differences between the index and the
quoted without `-z` regardless of the setting of this
variable.
-core.autocrlf::
- If true, makes git convert `CRLF` at the end of lines in text files to
- `LF` when reading from the filesystem, and convert in reverse when
- writing to the filesystem. The variable can be set to
- 'input', in which case the conversion happens only while
- reading from the filesystem but files are written out with
- `LF` at the end of lines. Currently, which paths to consider
- "text" (i.e. be subjected to the autocrlf mechanism) is
- decided purely based on the contents.
+core.eol::
+ Sets the line ending type to use in the working directory for
+ files that have the `text` property set. Alternatives are
+ 'lf', 'crlf' and 'native', which uses the platform's native
+ line ending. The default value is `native`. See
+ linkgit:gitattributes[5] for more information on end-of-line
+ conversion.
core.safecrlf::
- If true, makes git check if converting `CRLF` as controlled by
- `core.autocrlf` is reversible. Git will verify if a command
+ If true, makes git check if converting `CRLF` is reversible when
+ end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
For example, committing a file followed by checking out the
same file should yield the original file in the work tree. If
irreversible conversion but continue the operation.
+
CRLF conversion bears a slight chance of corrupting data.
-autocrlf=true will convert CRLF to LF during commit and LF to
+When it is enabled, git will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
+
Note, this safety check does not mean that a checkout will generate a
file identical to the original file for a different setting of
-`core.autocrlf`, but only for the current one. For example, a text
-file with `LF` would be accepted with `core.autocrlf=input` and could
-later be checked out with `core.autocrlf=true`, in which case the
+`core.eol` and `core.autocrlf`, but only for the current one. For
+example, a text file with `LF` would be accepted with `core.eol=lf`
+and could later be checked out with `core.eol=crlf`, in which case the
resulting file would contain `CRLF`, although the original file
contained `LF`. However, in both work trees the line endings would be
consistent, that is either all `LF` or all `CRLF`, but never mixed. A
file with mixed line endings would be reported by the `core.safecrlf`
mechanism.
+core.autocrlf::
+ Setting this variable to "true" is almost the same as setting
+ the `text` attribute to "auto" on all files except that text
+ files are not guaranteed to be normalized: files that contain
+ `CRLF` in the repository will not be touched. Use this
+ setting if you want to have `CRLF` line endings in your
+ working directory even though the repository does not have
+ normalized line endings. This variable can be set to 'input',
+ in which case no output conversion is performed.
+
core.symlinks::
If false, symbolic links are checked out as small plain files that
contain the link text. linkgit:git-update-index[1] and
linkgit:git-add[1] will not change the recorded type to regular
file. Useful on filesystems like FAT that do not support
- symbolic links. True by default.
+ symbolic links.
++
+The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
+will probe and set core.symlinks false if appropriate when the repository
+is created.
core.gitProxy::
A "proxy command" to execute (as 'command host port') instead
Can be overridden by the 'GIT_PROXY_COMMAND' environment variable
(which always applies universally, without the special "for"
handling).
++
+The special string `none` can be used as the proxy command to
+specify that no proxy be used for a given domain pattern.
+This is useful for excluding servers inside a firewall from
+proxy use, while defaulting to a common proxy for external domains.
core.ignoreStat::
If true, commands which modify both the working tree and the index
= true).
core.worktree::
- Set the path to the working tree. The value will not be
- used in combination with repositories found automatically in
- a .git directory (i.e. $GIT_DIR is not set).
+ Set the path to the root of the working tree.
This can be overridden by the GIT_WORK_TREE environment
- variable and the '--work-tree' command line option. It can be
- a absolute path or relative path to the directory specified by
- --git-dir or GIT_DIR.
- Note: If --git-dir or GIT_DIR are specified but none of
+ variable and the '--work-tree' command line option.
+ The value can be an absolute path or relative to the path to
+ the .git directory, which is either specified by --git-dir
+ or GIT_DIR, or automatically discovered.
+ If --git-dir or GIT_DIR is specified but none of
--work-tree, GIT_WORK_TREE and core.worktree is specified,
- the current working directory is regarded as the top directory
+ the current working directory is regarded as the top level
of your working tree.
++
+Note that this variable is honored even when set in a configuration
+file in a ".git" subdirectory of a directory and its value differs
+from the latter directory (e.g. "/path/to/.git/config" has
+core.worktree set to "/different/path"), which is most likely a
+misconfiguration. Running git commands in the "/path/to" directory will
+still use "/different/path" as the root of the work tree and can cause
+confusion unless you know what you are doing (e.g. you are creating a
+read-only snapshot of the same index to a location different from the
+repository's usual working tree).
core.logAllRefUpdates::
Enable the reflog. Updates to a ref <ref> is logged to the file
SHA1, the date/time and the reason of the update, but
only when the file exists. If this configuration
variable is set to true, missing "$GIT_DIR/logs/<ref>"
- file is automatically created for branch heads.
+ file is automatically created for branch heads (i.e. under
+ refs/heads/), remote refs (i.e. under refs/remotes/),
+ note refs (i.e. under refs/notes/), and the symbolic ref HEAD.
+
This information can be used to determine what commit
was the tip of a branch "2 days ago".
group-shareable. When 'umask' (or 'false'), git will use permissions
reported by umask(2). When '0xxx', where '0xxx' is an octal number,
files in the repository will have this mode value. '0xxx' will override
- user's umask value, and thus, users with a safe umask (0077) can use
- this option. Examples: '0660' is equivalent to 'group'. '0640' is a
+ user's umask value (whereas the other options will only override
+ requested parts of the user's umask value). Examples: '0660' will make
+ the repo read/write-able for the owner and group, but inaccessible to
+ others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
repository that is group-readable but not group-writable.
See linkgit:git-init[1]. False by default.
core.deltaBaseCacheLimit::
Maximum number of bytes to reserve for caching base objects
- that multiple deltafied objects reference. By storing the
+ that may be referenced by multiple deltified objects. By storing the
entire decompressed base objects in a cache Git is able
to avoid unpacking and decompressing frequently used base
objects multiple times.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
+core.bigFileThreshold::
+ Files larger than this size are stored deflated, without
+ attempting delta compression. Storing large files without
+ delta compression avoids excessive memory usage, at the
+ slight expense of increased disk usage.
++
+Default is 512 MiB on all platforms. This should be reasonable
+for most projects as source code and other text files can still
+be delta compressed, but larger binary media files won't be.
++
+Common unit suffixes of 'k', 'm', or 'g' are supported.
+
core.excludesfile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', git looks into this file for patterns
- of files which are not meant to be tracked. See
- linkgit:gitignore[5].
+ of files which are not meant to be tracked. "{tilde}/" is expanded
+ to the value of `$HOME` and "{tilde}user/" to the specified user's
+ home directory. See linkgit:gitignore[5].
+
+core.askpass::
+ Some commands (e.g. svn and http interfaces) that interactively
+ ask for a password can be told to use an external program given
+ via the value of this variable. Can be overridden by the 'GIT_ASKPASS'
+ environment variable. If not set, fall back to the value of the
+ 'SSH_ASKPASS' environment variable or, failing that, a simple password
+ prompt. The external program shall be given a suitable prompt as
+ command line argument and write the password on its STDOUT.
+
+core.attributesfile::
+ In addition to '.gitattributes' (per-directory) and
+ '.git/info/attributes', git looks into this file for attributes
+ (see linkgit:gitattributes[5]). Path expansions are made the same
+ way as for `core.excludesfile`.
core.editor::
Commands such as `commit` and `tag` that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
- `GIT_EDITOR` is not set. The order of preference is
- `GIT_EDITOR` environment, `core.editor`, `VISUAL` and
- `EDITOR` environment variables and then finally `vi`.
+ `GIT_EDITOR` is not set. See linkgit:git-var[1].
core.pager::
- The command that git will use to paginate output. Can be overridden
- with the `GIT_PAGER` environment variable.
+ The command that git will use to paginate output. Can
+ be overridden with the `GIT_PAGER` environment
+ variable. Note that git sets the `LESS` environment
+ variable to `FRSX` if it is unset when it runs the
+ pager. One can change these settings by setting the
+ `LESS` variable to some other value. Alternately,
+ these settings can be overridden on a project or
+ global basis by setting the `core.pager` option.
+ Setting `core.pager` has no affect on the `LESS`
+ environment variable behaviour above, so if you want
+ to override git's default settings this way, you need
+ to be explicit. For example, to disable the S option
+ in a backward compatible manner, set `core.pager`
+ to `less -+$LESS -FRX`. This will be passed to the
+ shell by git, which will translate the final command to
+ `LESS=FRSX less -+FRSX -FRX`.
core.whitespace::
A comma separated list of common whitespace problems to
- notice. 'git-diff' will use `color.diff.whitespace` to
- highlight them, and 'git-apply --whitespace=error' will
+ notice. 'git diff' will use `color.diff.whitespace` to
+ highlight them, and 'git apply --whitespace=error' will
consider them as errors. You can prefix `-` to disable
any of them (e.g. `-trailing-space`):
+
-* `trailing-space` treats trailing whitespaces at the end of the line
+* `blank-at-eol` treats trailing whitespaces at the end of the line
as an error (enabled by default).
* `space-before-tab` treats a space character that appears immediately
before a tab character in the initial indent part of the line as an
error (enabled by default).
* `indent-with-non-tab` treats a line that is indented with 8 or more
space characters as an error (not enabled by default).
+* `tab-in-indent` treats a tab character in the initial indent part of
+ the line as an error (not enabled by default).
+* `blank-at-eof` treats blank lines added at the end of file as an error
+ (enabled by default).
+* `trailing-space` is a short-hand to cover both `blank-at-eol` and
+ `blank-at-eof`.
* `cr-at-eol` treats a carriage-return at the end of line as
part of the line terminator, i.e. with it, `trailing-space`
does not trigger if the character before such a carriage-return
is not a whitespace (not enabled by default).
+* `tabwidth=<n>` tells how many character positions a tab occupies; this
+ is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent`
+ errors. The default tab width is 8. Allowed values are 1 to 63.
core.fsyncobjectfiles::
This boolean will enable 'fsync()' when writing object files.
journalling (traditional UNIX filesystems) or that only journal metadata
and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
+core.preloadindex::
+ Enable parallel index preload for operations like 'git diff'
++
+This can speed up operations like 'git diff' and 'git status' especially
+on filesystems like NFS that have weak caching semantics and thus
+relatively high IO latencies. With this set to 'true', git will do the
+index comparison to the filesystem data in parallel, allowing
+overlapping IO's.
+
+core.createObject::
+ You can set this to 'link', in which case a hardlink followed by
+ a delete of the source are used to make sure that object creation
+ will not overwrite existing objects.
++
+On some file system/operating system combinations, this is unreliable.
+Set this config setting to 'rename' there; However, This will remove the
+check that makes sure that existing object files will not get overwritten.
+
+core.notesRef::
+ When showing commit messages, also show notes which are stored in
+ the given ref. The ref must be fully qualified. If the given
+ ref does not exist, it is not an error but means that no
+ notes should be printed.
++
+This setting defaults to "refs/notes/commits", and it can be overridden by
+the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1].
+
+core.sparseCheckout::
+ Enable "sparse checkout" feature. See section "Sparse checkout" in
+ linkgit:git-read-tree[1] for more information.
+
+core.abbrev::
+ Set the length object names are abbreviated to. If unspecified,
+ many commands abbreviate to 7 hexdigits, which may not be enough
+ for abbreviated object names to stay unique for sufficiently long
+ time.
+
+add.ignore-errors::
+add.ignoreErrors::
+ Tells 'git add' to continue adding files when some files cannot be
+ added due to indexing errors. Equivalent to the '--ignore-errors'
+ option of linkgit:git-add[1]. Older versions of git accept only
+ `add.ignore-errors`, which does not follow the usual naming
+ convention for configuration variables. Newer versions of git
+ honor `add.ignoreErrors` as well.
+
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
after defining "alias.last = cat-file commit HEAD", the invocation
it will be treated as a shell command. For example, defining
"alias.new = !gitk --all --not ORIG_HEAD", the invocation
"git new" is equivalent to running the shell command
-"gitk --all --not ORIG_HEAD".
+"gitk --all --not ORIG_HEAD". Note that shell commands will be
+executed from the top-level directory of a repository, which may
+not necessarily be the current directory.
+'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix'
+from the original current directory. See linkgit:git-rev-parse[1].
+
+am.keepcr::
+ If true, git-am will call git-mailsplit for patches in mbox format
+ with parameter '--keep-cr'. In this case git-mailsplit will
+ not remove `\r` from lines ending with `\r\n`. Can be overridden
+ by giving '--no-keep-cr' from the command line.
+ See linkgit:git-am[1], linkgit:git-mailsplit[1].
+
+apply.ignorewhitespace::
+ When set to 'change', tells 'git apply' to ignore changes in
+ whitespace, in the same way as the '--ignore-space-change'
+ option.
+ When set to one of: no, none, never, false tells 'git apply' to
+ respect all whitespace differences.
+ See linkgit:git-apply[1].
apply.whitespace::
- Tells 'git-apply' how to handle whitespaces, in the same way
+ Tells 'git apply' how to handle whitespaces, in the same way
as the '--whitespace' option. See linkgit:git-apply[1].
branch.autosetupmerge::
- Tells 'git-branch' and 'git-checkout' to setup new branches
+ Tells 'git branch' and 'git checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
starting point branch. Note that even if this option is not set,
this behavior can be chosen per-branch using the `--track`
and `--no-track` options. The valid settings are: `false` -- no
automatic setup is done; `true` -- automatic setup is done when the
- starting point is a remote branch; `always` -- automatic setup is
- done when the starting point is either a local branch or remote
+ starting point is a remote-tracking branch; `always` --
+ automatic setup is done when the starting point is either a
+ local branch or remote-tracking
branch. This option defaults to true.
branch.autosetuprebase::
- When a new branch is created with 'git-branch' or 'git-checkout'
+ When a new branch is created with 'git branch' or 'git checkout'
that tracks another branch, this variable tells git to set
up pull to rebase instead of merge (see "branch.<name>.rebase").
When `never`, rebase is never automatically set to true.
When `local`, rebase is set to true for tracked branches of
other local branches.
When `remote`, rebase is set to true for tracked branches of
- remote branches.
+ remote-tracking branches.
When `always`, rebase will be set to true for all tracking
branches.
See "branch.autosetupmerge" for details on how to set up a
This option defaults to never.
branch.<name>.remote::
- When in branch <name>, it tells 'git-fetch' which remote to fetch.
- If this option is not given, 'git-fetch' defaults to remote "origin".
+ When in branch <name>, it tells 'git fetch' and 'git push' which
+ remote to fetch from/push to. It defaults to `origin` if no remote is
+ configured. `origin` is also used if you are not on any branch.
branch.<name>.merge::
- When in branch <name>, it tells 'git-fetch' the default
+ Defines, together with branch.<name>.remote, the upstream branch
+ for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
+ branch to merge and can also affect 'git push' (see push.default).
+ When in branch <name>, it tells 'git fetch' the default
refspec to be marked for merging in FETCH_HEAD. The value is
handled like the remote part of a refspec, and must match a
ref which is fetched from the remote given by
"branch.<name>.remote".
- The merge information is used by 'git-pull' (which at first calls
- 'git-fetch') to lookup the default branch for merging. Without
- this option, 'git-pull' defaults to merge the first refspec fetched.
+ The merge information is used by 'git pull' (which at first calls
+ 'git fetch') to lookup the default branch for merging. Without
+ this option, 'git pull' defaults to merge the first refspec fetched.
Specify multiple values to get an octopus merge.
- If you wish to setup 'git-pull' so that it merges into <name> from
+ If you wish to setup 'git pull' so that it merges into <name> from
another branch in the local repository, you can point
branch.<name>.merge to the desired branch, and use the special setting
`.` (a period) for branch.<name>.remote.
branch.<name>.mergeoptions::
Sets default options for merging into branch <name>. The syntax and
- supported options are equal to that of linkgit:git-merge[1], but
+ supported options are the same as those of linkgit:git-merge[1], but
option values containing whitespace characters are currently not
supported.
browser.<tool>.cmd::
Specify the command to invoke the specified browser. The
specified command is evaluated in shell with the URLs passed
- as arguments. (See linkgit:git-web--browse[1].)
+ as arguments. (See linkgit:git-web{litdd}browse[1].)
browser.<tool>.path::
Override the path for the given tool that may be used to
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
`current` (the current branch), `local` (a local branch),
- `remote` (a tracking branch in refs/remotes/), `plain` (other
+ `remote` (a remote-tracking branch in refs/remotes/), `plain` (other
refs).
+
The value for these configuration variables is a list of colors (at most
doesn't matter.
color.diff::
- When set to `always`, always use colors in patch.
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ Whether to use ANSI escape sequences to add color to patches.
+ If this is set to `always`, linkgit:git-diff[1],
+ linkgit:git-log[1], and linkgit:git-show[1] will use color
+ for all patches. If it is set to `true` or `auto`, those
+ commands will only use color when output is to the terminal.
+ Defaults to false.
++
+This does not affect linkgit:git-format-patch[1] nor the
+'git-diff-{asterisk}' plumbing commands. Can be overridden on the
+command line with the `--color[=<when>]` option.
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
of `plain` (context text), `meta` (metainformation), `frag`
- (hunk header), `old` (removed lines), `new` (added lines),
- `commit` (commit headers), or `whitespace` (highlighting
- whitespace errors). The values of these variables may be specified as
- in color.branch.<slot>.
+ (hunk header), 'func' (function in hunk header), `old` (removed lines),
+ `new` (added lines), `commit` (commit headers), or `whitespace`
+ (highlighting whitespace errors). The values of these variables may be
+ specified as in color.branch.<slot>.
+
+color.decorate.<slot>::
+ Use customized color for 'git log --decorate' output. `<slot>` is one
+ of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
+ branches, remote-tracking branches, tags, stash and HEAD, respectively.
+
+color.grep::
+ When set to `always`, always highlight matches. When `false` (or
+ `never`), never. When set to `true` or `auto`, use color only
+ when the output is written to the terminal. Defaults to `false`.
+
+color.grep.<slot>::
+ Use customized color for grep colorization. `<slot>` specifies which
+ part of the line to use the specified color, and is one of
++
+--
+`context`;;
+ non-matching text in context lines (when using `-A`, `-B`, or `-C`)
+`filename`;;
+ filename prefix (when not using `-h`)
+`function`;;
+ function name lines (when using `-p`)
+`linenumber`;;
+ line number prefix (when using `-n`)
+`match`;;
+ matching text
+`selected`;;
+ non-matching text in selected lines
+`separator`;;
+ separators between fields on a line (`:`, `-`, and `=`)
+ and between hunks (`--`)
+--
++
+The values of these variables may be specified as in color.branch.<slot>.
color.interactive::
When set to `always`, always use colors for interactive prompts
colors only when the output is to the terminal. Defaults to false.
color.interactive.<slot>::
- Use customized color for 'git-add --interactive'
- output. `<slot>` may be `prompt`, `header`, or `help`, for
- three distinct types of normal output from interactive
- programs. The values of these variables may be specified as
+ Use customized color for 'git add --interactive'
+ output. `<slot>` may be `prompt`, `header`, `help` or `error`, for
+ four distinct types of normal output from interactive
+ commands. The values of these variables may be specified as
in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
use (default is true).
+color.showbranch::
+ A boolean to enable/disable color in the output of
+ linkgit:git-show-branch[1]. May be set to `always`,
+ `false` (or `never`) or `auto` (or `true`), in which case colors are used
+ only when the output is to a terminal. Defaults to false.
+
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
one of `header` (the header text of the status message),
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
- `untracked` (files which are not tracked by git), or
+ `untracked` (files which are not tracked by git),
+ `branch` (the current branch), or
`nobranch` (the color the 'no branch' warning is shown in, defaulting
to red). The values of these variables may be specified as in
color.branch.<slot>.
+color.ui::
+ This variable determines the default value for variables such
+ as `color.diff` and `color.grep` that control the use of color
+ per command family. Its scope will expand as more commands learn
+ configuration to set a default for the `--color` option. Set it
+ to `always` if you want all output not intended for machine
+ consumption to use color, to `true` or `auto` if you want such
+ output to use color when written to the terminal, or to `false` or
+ `never` if you prefer git commands not to use color unless enabled
+ explicitly with some other configuration or the `--color` option.
+
+commit.status::
+ A boolean to enable/disable inclusion of status information in the
+ commit message template when using an editor to prepare the commit
+ message. Defaults to true.
+
commit.template::
Specify a file to use as the template for new commit messages.
+ "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
+ specified user's home directory.
-color.ui::
- When set to `always`, always use colors in all git commands which
- are capable of colored output. When false (or `never`), never. When
- set to `true` or `auto`, use colors only when the output is to the
- terminal. When more specific variables of color.* are set, they always
- take precedence over this setting. Defaults to false.
-
-diff.autorefreshindex::
- When using 'git-diff' to compare with work tree
- files, do not consider stat-only change as changed.
- Instead, silently run `git update-index --refresh` to
- update the cached stat information for paths whose
- contents in the work tree match the contents in the
- index. This option defaults to true. Note that this
- affects only 'git-diff' Porcelain, and not lower level
- 'diff' commands, such as 'git-diff-files'.
-
-diff.external::
- If this config variable is set, diff generation is not
- performed using the internal diff machinery, but using the
- given command. Can be overridden with the `GIT_EXTERNAL_DIFF'
- environment variable. The command is called with parameters
- as described under "git Diffs" in linkgit:git[1]. Note: if
- you want to use an external diff program only on a subset of
- your files, you might want to use linkgit:gitattributes[5] instead.
-
-diff.renameLimit::
- The number of files to consider when performing the copy/rename
- detection; equivalent to the 'git-diff' option '-l'.
-
-diff.renames::
- Tells git to detect renames. If set to any boolean value, it
- will enable basic rename detection. If set to "copies" or
- "copy", it will detect copies, as well.
+include::diff-config.txt[]
+
+difftool.<tool>.path::
+ Override the path for the given tool. This is useful in case
+ your tool is not in the PATH.
+
+difftool.<tool>.cmd::
+ Specify the command to invoke the specified diff tool.
+ The specified command is evaluated in shell with the following
+ variables available: 'LOCAL' is set to the name of the temporary
+ file containing the contents of the diff pre-image and 'REMOTE'
+ is set to the name of the temporary file containing the contents
+ of the diff post-image.
+
+difftool.prompt::
+ Prompt before each invocation of the diff tool.
+
+diff.wordRegex::
+ A POSIX Extended Regular Expression used to determine what is a "word"
+ when performing word-by-word difference calculations. Character
+ sequences that match the regular expression are "words", all other
+ characters are *ignorable* whitespace.
+
+fetch.recurseSubmodules::
+ This option can be either set to a boolean value or to 'on-demand'.
+ Setting it to a boolean changes the behavior of fetch and pull to
+ unconditionally recurse into submodules when set to true or to not
+ recurse at all when set to false. When set to 'on-demand' (the default
+ value), fetch and pull will only recurse into a populated submodule
+ when its superproject retrieves a commit that updates the submodule's
+ reference.
fetch.unpackLimit::
If the number of objects fetched over the git native
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
-format.numbered::
- A boolean which can enable sequence numbers in patch subjects.
- Setting this option to "auto" will enable it only if there is
- more than one patch. See --numbered option in
+format.attach::
+ Enable multipart/mixed attachments as the default for
+ 'format-patch'. The value can also be a double quoted string
+ which will enable attachments as the default and set the
+ value as the boundary. See the --attach option in
linkgit:git-format-patch[1].
+format.numbered::
+ A boolean which can enable or disable sequence numbers in patch
+ subjects. It defaults to "auto" which enables it only if there
+ is more than one patch. It can be enabled or disabled for all
+ messages by setting it to "true" or "false". See --numbered
+ option in linkgit:git-format-patch[1].
+
format.headers::
Additional email headers to include in a patch to be submitted
by mail. See linkgit:git-format-patch[1].
+format.to::
+format.cc::
+ Additional recipients to include in a patch to be submitted
+ by mail. See the --to and --cc options in
+ linkgit:git-format-patch[1].
+
+format.subjectprefix::
+ The default for format-patch is to output files with the '[PATCH]'
+ subject prefix. Use this variable to change that prefix.
+
+format.signature::
+ The default for format-patch is to output a signature containing
+ the git version number. Use this variable to change that default.
+ Set this variable to the empty string ("") to suppress
+ signature generation.
+
format.suffix::
The default for format-patch is to output files with the suffix
`.patch`. Use this variable to change that suffix (make sure to
See linkgit:git-log[1], linkgit:git-show[1],
linkgit:git-whatchanged[1].
+format.thread::
+ The default threading style for 'git format-patch'. Can be
+ a boolean value, or `shallow` or `deep`. `shallow` threading
+ makes every mail a reply to the head of the series,
+ where the head is chosen from the cover letter, the
+ `\--in-reply-to`, and the first patch mail, in this order.
+ `deep` threading makes every mail a reply to the previous one.
+ A true boolean value is the same as `shallow`, and a false
+ value disables threading.
+
+format.signoff::
+ A boolean value which lets you enable the `-s/--signoff` option of
+ format-patch by default. *Note:* Adding the Signed-off-by: line to a
+ patch should be a conscious act and means that you certify you have
+ the rights to submit this work under the same open source license.
+ Please see the 'SubmittingPatches' document for further discussion.
+
+filter.<driver>.clean::
+ The command which is used to convert the content of a worktree
+ file to a blob upon checkin. See linkgit:gitattributes[5] for
+ details.
+
+filter.<driver>.smudge::
+ The command which is used to convert the content of a blob
+ object to a worktree file upon checkout. See
+ linkgit:gitattributes[5] for details.
+
gc.aggressiveWindow::
The window size parameter used in the delta compression
- algorithm used by 'git-gc --aggressive'. This defaults
- to 10.
+ algorithm used by 'git gc --aggressive'. This defaults
+ to 250.
gc.auto::
When there are approximately more than this many loose
default value is 50. Setting this to 0 disables it.
gc.packrefs::
- 'git-gc' does not run `git pack-refs` in a bare repository by
- default so that older dumb-transport clients can still fetch
- from the repository. Setting this to `true` lets 'git-gc'
- to run `git pack-refs`. Setting this to `false` tells
- 'git-gc' never to run `git pack-refs`. The default setting is
- `notbare`. Enable it only when you know you do not have to
- support such clients. The default setting will change to `true`
- at some stage, and setting this to `false` will continue to
- prevent `git pack-refs` from being run from 'git-gc'.
+ Running `git pack-refs` in a repository renders it
+ unclonable by Git versions prior to 1.5.1.2 over dumb
+ transports such as HTTP. This variable determines whether
+ 'git gc' runs `git pack-refs`. This can be set to `notbare`
+ to enable it within all non-bare repos or it can be set to a
+ boolean value. The default is `true`.
gc.pruneexpire::
- When 'git-gc' is run, it will call 'prune --expire 2.weeks.ago'.
- Override the grace period with this config variable.
+ When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
+ Override the grace period with this config variable. The value
+ "now" may be used to disable this grace period and always prune
+ unreachable objects immediately.
gc.reflogexpire::
- 'git-reflog expire' removes reflog entries older than
- this time; defaults to 90 days.
+gc.<pattern>.reflogexpire::
+ 'git reflog expire' removes reflog entries older than
+ this time; defaults to 90 days. With "<pattern>" (e.g.
+ "refs/stash") in the middle the setting applies only to
+ the refs that match the <pattern>.
gc.reflogexpireunreachable::
- 'git-reflog expire' removes reflog entries older than
+gc.<ref>.reflogexpireunreachable::
+ 'git reflog expire' removes reflog entries older than
this time and are not reachable from the current tip;
- defaults to 30 days.
+ defaults to 30 days. With "<pattern>" (e.g. "refs/stash")
+ in the middle, the setting applies only to the refs that
+ match the <pattern>.
gc.rerereresolved::
Records of conflicted merge you resolved earlier are
- kept for this many days when 'git-rerere gc' is run.
+ kept for this many days when 'git rerere gc' is run.
The default is 60 days. See linkgit:git-rerere[1].
gc.rerereunresolved::
Records of conflicted merge you have not resolved are
- kept for this many days when 'git-rerere gc' is run.
+ kept for this many days when 'git rerere gc' is run.
The default is 15 days. See linkgit:git-rerere[1].
-rerere.autoupdate::
- When set to true, `git-rerere` updates the index with the
- resulting contents after it cleanly resolves conflicts using
- previously recorded resolution. Defaults to false.
-
-rerere.enabled::
- Activate recording of resolved conflicts, so that identical
- conflict hunks can be resolved automatically, should they
- be encountered again. linkgit:git-rerere[1] command is by
- default enabled if you create `rr-cache` directory under
- `$GIT_DIR`, but can be disabled by setting this option to false.
+gitcvs.commitmsgannotation::
+ Append this string to each commit message. Set to empty string
+ to disable this feature. Defaults to "via git-CVS emulator".
gitcvs.enabled::
Whether the CVS server interface is enabled for this repository.
Path to a log file where the CVS server interface well... logs
various stuff. See linkgit:git-cvsserver[1].
-gitcvs.usecrlfattr
- If true, the server will look up the `crlf` attribute for
- files to determine the '-k' modes to use. If `crlf` is set,
- the '-k' mode will be left blank, so cvs clients will
- treat it as text. If `crlf` is explicitly unset, the file
+gitcvs.usecrlfattr::
+ If true, the server will look up the end-of-line conversion
+ attributes for files to determine the '-k' modes to use. If
+ the attributes force git to treat a file as text,
+ the '-k' mode will be left blank so CVS clients will
+ treat it as text. If they suppress text conversion, the file
will be set with '-kb' mode, which suppresses any newline munging
- the client might otherwise do. If `crlf` is not specified,
- then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5].
+ the client might otherwise do. If the attributes do not allow
+ the file type to be determined, then 'gitcvs.allbinary' is
+ used. See linkgit:gitattributes[5].
gitcvs.allbinary::
This is used if 'gitcvs.usecrlfattr' does not resolve
is one of "ext" and "pserver") to make them apply only for the given
access method.
+grep.lineNumber::
+ If set to true, enable '-n' option by default.
+
+grep.extendedRegexp::
+ If set to true, enable '--extended-regexp' option by default.
+
gui.commitmsgwidth::
Defines how wide the commit message window is in the
linkgit:git-gui[1]. "75" is the default.
Specifies how many context lines should be used in calls to diff
made by the linkgit:git-gui[1]. The default is "5".
+gui.encoding::
+ Specifies the default encoding to use for displaying of
+ file contents in linkgit:git-gui[1] and linkgit:gitk[1].
+ It can be overridden by setting the 'encoding' attribute
+ for relevant files (see linkgit:gitattributes[5]).
+ If this option is not set, the tools default to the
+ locale encoding.
+
gui.matchtrackingbranch::
Determines if new branches created with linkgit:git-gui[1] should
default to tracking remote branches with matching names or
linkgit:git-gui[1].
gui.pruneduringfetch::
- "true" if linkgit:git-gui[1] should prune tracking branches when
+ "true" if linkgit:git-gui[1] should prune remote-tracking branches when
performing a fetch. The default value is "false".
gui.trustmtime::
the linkgit:git-gui[1]. When set to "none" spell checking is turned
off.
+gui.fastcopyblame::
+ If true, 'git gui blame' uses `-C` instead of `-C -C` for original
+ location detection. It makes blame significantly faster on huge
+ repositories at the expense of less thorough copy detection.
+
+gui.copyblamethreshold::
+ Specifies the threshold to use in 'git gui blame' original location
+ detection, measured in alphanumeric characters. See the
+ linkgit:git-blame[1] manual for more information on copy detection.
+
+gui.blamehistoryctx::
+ Specifies the radius of history context in days to show in
+ linkgit:gitk[1] for the selected commit, when the `Show History
+ Context` menu item is invoked from 'git gui blame'. If this
+ variable is set to zero, the whole history is shown.
+
+guitool.<name>.cmd::
+ Specifies the shell command line to execute when the corresponding item
+ of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
+ mandatory for every tool. The command is executed from the root of
+ the working directory, and in the environment it receives the name of
+ the tool as 'GIT_GUITOOL', the name of the currently selected file as
+ 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
+ the head is detached, 'CUR_BRANCH' is empty).
+
+guitool.<name>.needsfile::
+ Run the tool only if a diff is selected in the GUI. It guarantees
+ that 'FILENAME' is not empty.
+
+guitool.<name>.noconsole::
+ Run the command silently, without creating a window to display its
+ output.
+
+guitool.<name>.norescan::
+ Don't rescan the working directory for changes after the tool
+ finishes execution.
+
+guitool.<name>.confirm::
+ Show a confirmation dialog before actually running the tool.
+
+guitool.<name>.argprompt::
+ Request a string argument from the user, and pass it to the tool
+ through the 'ARGS' environment variable. Since requesting an
+ argument implies confirmation, the 'confirm' option has no effect
+ if this is enabled. If the option is set to 'true', 'yes', or '1',
+ the dialog uses a built-in generic prompt; otherwise the exact
+ value of the variable is used.
+
+guitool.<name>.revprompt::
+ Request a single valid revision from the user, and set the
+ 'REVISION' environment variable. In other aspects this option
+ is similar to 'argprompt', and can be used together with it.
+
+guitool.<name>.revunmerged::
+ Show only unmerged branches in the 'revprompt' subdialog.
+ This is useful for tools similar to merge or rebase, but not
+ for things like checkout or reset.
+
+guitool.<name>.title::
+ Specifies the title to use for the prompt dialog. The default
+ is the tool name.
+
+guitool.<name>.prompt::
+ Specifies the general prompt string to display at the top of
+ the dialog, before subsections for 'argprompt' and 'revprompt'.
+ The default value includes the actual command.
+
help.browser::
Specify the browser that will be used to display help in the
'web' format. See linkgit:git-help[1].
Values 'man', 'info', 'web' and 'html' are supported. 'man' is
the default. 'web' and 'html' are the same.
+help.autocorrect::
+ Automatically correct and execute mistyped commands after
+ waiting for the given number of deciseconds (0.1 sec). If more
+ than one command can be deduced from the entered text, nothing
+ will be executed. If the value of this option is negative,
+ the corrected command will be executed immediately. If the
+ value is 0 - the command will be just shown but not executed.
+ This is the default.
+
http.proxy::
Override the HTTP proxy, normally configured using the 'http_proxy'
environment variable (see linkgit:curl[1]). This can be overridden
on a per-remote basis; see remote.<name>.proxy
+http.cookiefile::
+ File containing previously stored cookie lines which should be used
+ in the git http session, if they match the server. The file format
+ of the file to read cookies from should be plain HTTP headers or
+ the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
+ NOTE that the file specified with http.cookiefile is only used as
+ input. No cookies will be stored in the file.
+
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment
over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment
variable.
+http.sslCertPasswordProtected::
+ Enable git's password prompt for the SSL certificate. Otherwise
+ OpenSSL will prompt the user, possibly many times, if the
+ certificate or private key is encrypted. Can be overridden by the
+ 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.
+
http.sslCAInfo::
File containing the certificates to verify the peer with when
fetching or pushing over HTTPS. Can be overridden by the
How many HTTP requests to launch in parallel. Can be overridden
by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
+http.minSessions::
+ The number of curl sessions (counted across slots) to be kept across
+ requests. They will not be ended with curl_easy_cleanup() until
+ http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
+ value will be capped at 1. Defaults to 1.
+
+http.postBuffer::
+ Maximum size in bytes of the buffer used by smart HTTP
+ transports when POSTing data to the remote system.
+ For requests larger than this buffer size, HTTP/1.1 and
+ Transfer-Encoding: chunked is used to avoid creating a
+ massive pack file locally. Default is 1 MiB, which is
+ sufficient for most requests.
+
http.lowSpeedLimit, http.lowSpeedTime::
If the HTTP transfer speed is less than 'http.lowSpeedLimit'
for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'
environment variable. Default is false (curl will use EPSV).
+http.useragent::
+ The HTTP USER_AGENT string presented to an HTTP server. The default
+ value represents the version of the client git such as git/1.7.1.
+ This option allows you to override this value to a more common value
+ such as Mozilla/4.0. This may be necessary, for instance, if
+ connecting through a firewall that restricts HTTP connections to a set
+ of common USER_AGENT strings (but not including those like git/1.7.1).
+ Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.
+
i18n.commitEncoding::
Character encoding the commit messages are stored in; git itself
does not care per se, but this information is necessary e.g. when
i18n.logOutputEncoding::
Character encoding the commit messages are converted to when
- running 'git-log' and friends.
+ running 'git log' and friends.
+
+imap::
+ The configuration variables in the 'imap' section are described
+ in linkgit:git-imap-send[1].
+
+init.templatedir::
+ Specify the directory from which templates will be copied.
+ (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
instaweb.browser::
Specify the program that will be used to browse your working
be bound to the local IP (127.0.0.1).
instaweb.modulepath::
- The module path for an apache httpd used by linkgit:git-instaweb[1].
+ The default module path for linkgit:git-instaweb[1] to use
+ instead of /usr/lib/apache2/modules. Only used if httpd
+ is Apache.
instaweb.port::
The port number to bind the gitweb httpd to. See
linkgit:git-instaweb[1].
+interactive.singlekey::
+ In interactive commands, allow the user to provide one-letter
+ input with a single key (i.e., without hitting enter).
+ Currently this is used by the `\--patch` mode of
+ linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
+ linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
+ setting is silently ignored if portable keystroke input
+ is not available.
+
+log.abbrevCommit::
+ If true, makes linkgit:git-log[1], linkgit:git-show[1], and
+ linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may
+ override this option with `\--no-abbrev-commit`.
+
log.date::
- Set default date-time mode for the log command. Setting log.date
- value is similar to using 'git-log'\'s --date option. The value is one of the
- following alternatives: {relative,local,default,iso,rfc,short}.
- See linkgit:git-log[1].
+ Set the default date-time mode for the 'log' command.
+ Setting a value for log.date is similar to using 'git log''s
+ `\--date` option. Possible values are `relative`, `local`,
+ `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]
+ for details.
+
+log.decorate::
+ Print out the ref names of any commits that are shown by the log
+ command. If 'short' is specified, the ref name prefixes 'refs/heads/',
+ 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
+ specified, the full ref name (including prefix) will be printed.
+ This is the same as the log commands '--decorate' option.
log.showroot::
If true, the initial commit will be shown as a big creation event.
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
normally hide the root commit will now show it. True by default.
+mailmap.file::
+ The location of an augmenting mailmap file. The default
+ mailmap, located in the root of the repository, is loaded
+ first, then the mailmap file pointed to by this variable.
+ The location of the mailmap file may be in a repository
+ subdirectory, or somewhere outside of the repository itself.
+ See linkgit:git-shortlog[1] and linkgit:git-blame[1].
+
man.viewer::
Specify the programs that may be used to display help in the
'man' format. See linkgit:git-help[1].
-include::merge-config.txt[]
-
man.<tool>.cmd::
Specify the command to invoke the specified man viewer. The
specified command is evaluated in shell with the man page
Override the path for the given tool that may be used to
display help in the 'man' format. See linkgit:git-help[1].
+include::merge-config.txt[]
+
mergetool.<tool>.path::
Override the path for the given tool. This is useful in case
your tool is not in the PATH.
is set to `false` then this file is not preserved. Defaults to
`true` (i.e. keep the backup files).
+mergetool.keepTemporaries::
+ When invoking a custom merge tool, git uses a set of temporary
+ files to pass to the tool. If the tool returns an error and this
+ variable is set to `true`, then these temporary files will be
+ preserved, otherwise they will be removed after the tool has
+ exited. Defaults to `false`.
+
+mergetool.prompt::
+ Prompt before each invocation of the merge resolution program.
+
+notes.displayRef::
+ The (fully qualified) refname from which to show notes when
+ showing commit messages. The value of this variable can be set
+ to a glob, in which case notes from all matching refs will be
+ shown. You may also specify this configuration variable
+ several times. A warning will be issued for refs that do not
+ exist, but a glob that does not match any refs is silently
+ ignored.
++
+This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
+environment variable, which must be a colon separated list of refs or
+globs.
++
+The effective value of "core.notesRef" (possibly overridden by
+GIT_NOTES_REF) is also implicitly added to the list of refs to be
+displayed.
+
+notes.rewrite.<command>::
+ When rewriting commits with <command> (currently `amend` or
+ `rebase`) and this variable is set to `true`, git
+ automatically copies your notes from the original to the
+ rewritten commit. Defaults to `true`, but see
+ "notes.rewriteRef" below.
+
+notes.rewriteMode::
+ When copying notes during a rewrite (see the
+ "notes.rewrite.<command>" option), determines what to do if
+ the target commit already has a note. Must be one of
+ `overwrite`, `concatenate`, or `ignore`. Defaults to
+ `concatenate`.
++
+This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
+environment variable.
+
+notes.rewriteRef::
+ When copying notes during a rewrite, specifies the (fully
+ qualified) ref whose notes should be copied. The ref may be a
+ glob, in which case notes in all matching refs will be copied.
+ You may also specify this configuration several times.
++
+Does not have a default value; you must configure this variable to
+enable note rewriting.
++
+This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
+environment variable, which must be a colon separated list of refs or
+globs.
+
pack.window::
The size of the window used by linkgit:git-pack-objects[1] when no
window size is given on the command line. Defaults to 10.
not set, defaults to -1, the zlib default, which is "a default
compromise between speed and compression (currently equivalent
to level 6)."
++
+Note that changing the compression level will not automatically recompress
+all existing objects. You can force recompression by passing the -F option
+to linkgit:git-repack[1].
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
- linkgit:git-pack-objects[1].
- A value of 0 means no limit. Defaults to 0.
+ linkgit:git-pack-objects[1] before writing them out to a pack.
+ This cache is used to speed up the writing object phase by not
+ having to recompute the final delta result once the best match
+ for all objects is found. Repacking large repositories on machines
+ which are tight with memory might be badly impacted by this though,
+ especially if this cache pushes the system into swapping.
+ A value of 0 means no limit. The smallest size of 1 byte may be
+ used to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit::
The maximum size of a delta, that is cached in
- linkgit:git-pack-objects[1]. Defaults to 1000.
+ linkgit:git-pack-objects[1]. This cache is used to speed up the
+ writing object phase by not having to recompute the final delta
+ result once the best match for all objects is found. Defaults to 1000.
pack.threads::
Specifies the number of threads to spawn when searching for best
the `{asterisk}.idx` file.
pack.packSizeLimit::
- The default maximum size of a pack. This setting only affects
- packing to a file, i.e. the git:// protocol is unaffected. It
- can be overridden by the `\--max-pack-size` option of
- linkgit:git-repack[1].
+ The maximum size of a pack. This setting only affects
+ packing to a file when repacking, i.e. the git:// protocol
+ is unaffected. It can be overridden by the `\--max-pack-size`
+ option of linkgit:git-repack[1]. The minimum size allowed is
+ limited to 1 MiB. The default is unlimited.
+ Common unit suffixes of 'k', 'm', or 'g' are
+ supported.
pager.<cmd>::
- Allows to set your own pager preferences for each command, overriding
- the default. If `\--pager` or `\--no-pager` is specified on the command
- line, it takes precedence over this option.
+ If the value is boolean, turns on or off pagination of the
+ output of a particular git subcommand when writing to a tty.
+ Otherwise, turns on pagination for the subcommand using the
+ pager specified by the value of `pager.<cmd>`. If `\--paginate`
+ or `\--no-pager` is specified on the command line, it takes
+ precedence over this option. To disable pagination for all
+ commands, set `core.pager` or `GIT_PAGER` to `cat`.
+
+pretty.<name>::
+ Alias for a --pretty= format string, as specified in
+ linkgit:git-log[1]. Any aliases defined here can be used just
+ as the built-in pretty formats could. For example,
+ running `git config pretty.changelog "format:{asterisk} %H %s"`
+ would cause the invocation `git log --pretty=changelog`
+ to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`.
+ Note that an alias with the same name as a built-in format
+ will be silently ignored.
pull.octopus::
The default merge strategy to use when pulling multiple branches
pull.twohead::
The default merge strategy to use when pulling a single branch.
+push.default::
+ Defines the action git push should take if no refspec is given
+ on the command line, no refspec is configured in the remote, and
+ no refspec is implied by any of the options given on the command
+ line. Possible values are:
++
+* `nothing` - do not push anything.
+* `matching` - push all matching branches.
+ All branches having the same name in both ends are considered to be
+ matching. This is the default.
+* `upstream` - push the current branch to its upstream branch.
+* `tracking` - deprecated synonym for `upstream`.
+* `current` - push the current branch to a branch of the same name.
+
+rebase.stat::
+ Whether to show a diffstat of what changed upstream since the last
+ rebase. False by default.
+
+rebase.autosquash::
+ If set to true enable '--autosquash' option by default.
+
+receive.autogc::
+ By default, git-receive-pack will run "git-gc --auto" after
+ receiving data from git-push and updating refs. You can stop
+ it by setting this variable to false.
+
+receive.fsckObjects::
+ If it is set to true, git-receive-pack will check all received
+ objects. It will abort in the case of a malformed object or a
+ broken link. The result of an abort are only dangling objects.
+ Defaults to false.
+
+receive.unpackLimit::
+ If the number of objects received in a push is below this
+ limit then the objects will be unpacked into loose object
+ files. However if the number of received objects equals or
+ exceeds this limit then the received pack will be stored as
+ a pack, after adding any missing delta bases. Storing the
+ pack from a push can make the push operation complete faster,
+ especially on slow filesystems. If not set, the value of
+ `transfer.unpackLimit` is used instead.
+
+receive.denyDeletes::
+ If set to true, git-receive-pack will deny a ref update that deletes
+ the ref. Use this to prevent such a ref deletion via a push.
+
+receive.denyDeleteCurrent::
+ If set to true, git-receive-pack will deny a ref update that
+ deletes the currently checked out branch of a non-bare repository.
+
+receive.denyCurrentBranch::
+ If set to true or "refuse", git-receive-pack will deny a ref update
+ to the currently checked out branch of a non-bare repository.
+ Such a push is potentially dangerous because it brings the HEAD
+ out of sync with the index and working tree. If set to "warn",
+ print a warning of such a push to stderr, but allow the push to
+ proceed. If set to false or "ignore", allow such pushes with no
+ message. Defaults to "refuse".
+
+receive.denyNonFastForwards::
+ If set to true, git-receive-pack will deny a ref update which is
+ not a fast-forward. Use this to prevent such an update via a push,
+ even if that push is forced. This configuration variable is
+ set when initializing a shared repository.
+
+receive.updateserverinfo::
+ If set to true, git-receive-pack will run git-update-server-info
+ after receiving data from git-push and updating refs.
+
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
+remote.<name>.pushurl::
+ The push URL of a remote repository. See linkgit:git-push[1].
+
remote.<name>.proxy::
For remotes that require curl (http, https and ftp), the URL to
the proxy to use for that remote. Set to the empty string to
remote.<name>.skipDefaultUpdate::
If true, this remote will be skipped by default when updating
- using the update subcommand of linkgit:git-remote[1].
+ using linkgit:git-fetch[1] or the `update` subcommand of
+ linkgit:git-remote[1].
+
+remote.<name>.skipFetchAll::
+ If true, this remote will be skipped by default when updating
+ using linkgit:git-fetch[1] or the `update` subcommand of
+ linkgit:git-remote[1].
remote.<name>.receivepack::
The default program to execute on the remote side when pushing. See
remote.<name>.tagopt::
Setting this value to \--no-tags disables automatic tag following when
- fetching from remote <name>
+ fetching from remote <name>. Setting it to \--tags will fetch every
+ tag from remote <name>, even if they are not reachable from remote
+ branch heads. Passing these flags directly to linkgit:git-fetch[1] can
+ override this setting. See options \--tags and \--no-tags of
+ linkgit:git-fetch[1].
+
+remote.<name>.vcs::
+ Setting this to a value <vcs> will cause git to interact with
+ the remote with the git-remote-<vcs> helper.
remotes.<group>::
The list of remotes which are fetched by "git remote update
"false" and repack. Access from old git versions over the
native protocol are unaffected by this option.
+rerere.autoupdate::
+ When set to true, `git-rerere` updates the index with the
+ resulting contents after it cleanly resolves conflicts using
+ previously recorded resolution. Defaults to false.
+
+rerere.enabled::
+ Activate recording of resolved conflicts, so that identical
+ conflict hunks can be resolved automatically, should they
+ be encountered again. linkgit:git-rerere[1] command is by
+ default enabled if you create `rr-cache` directory under
+ `$GIT_DIR`, but can be disabled by setting this option to false.
+
+sendemail.identity::
+ A configuration identity. When given, causes values in the
+ 'sendemail.<identity>' subsection to take precedence over
+ values in the 'sendemail' section. The default identity is
+ the value of 'sendemail.identity'.
+
+sendemail.smtpencryption::
+ See linkgit:git-send-email[1] for description. Note that this
+ setting is not subject to the 'identity' mechanism.
+
+sendemail.smtpssl::
+ Deprecated alias for 'sendemail.smtpencryption = ssl'.
+
+sendemail.<identity>.*::
+ Identity-specific versions of the 'sendemail.*' parameters
+ found below, taking precedence over those when the this
+ identity is selected, through command-line or
+ 'sendemail.identity'.
+
+sendemail.aliasesfile::
+sendemail.aliasfiletype::
+sendemail.bcc::
+sendemail.cc::
+sendemail.cccmd::
+sendemail.chainreplyto::
+sendemail.confirm::
+sendemail.envelopesender::
+sendemail.from::
+sendemail.multiedit::
+sendemail.signedoffbycc::
+sendemail.smtppass::
+sendemail.suppresscc::
+sendemail.suppressfrom::
+sendemail.to::
+sendemail.smtpdomain::
+sendemail.smtpserver::
+sendemail.smtpserverport::
+sendemail.smtpserveroption::
+sendemail.smtpuser::
+sendemail.thread::
+sendemail.validate::
+ See linkgit:git-send-email[1] for description.
+
+sendemail.signedoffcc::
+ Deprecated alias for 'sendemail.signedoffbycc'.
+
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
the untracked files. Possible values are:
+
--
- - 'no' - Show no untracked files
- - 'normal' - Shows untracked files and directories
- - 'all' - Shows also individual files in untracked directories.
+* `no` - Show no untracked files.
+* `normal` - Show untracked files and directories.
+* `all` - Show also individual files in untracked directories.
--
+
If this variable is not specified, it defaults to 'normal'.
This variable can be overridden with the -u|--untracked-files option
of linkgit:git-status[1] and linkgit:git-commit[1].
+status.submodulesummary::
+ Defaults to false.
+ If this is set to a non zero number or true (identical to -1 or an
+ unlimited number), the submodule summary will be enabled and a
+ summary of commits for modified submodules will be shown (see
+ --summary-limit option of linkgit:git-submodule[1]).
+
+submodule.<name>.path::
+submodule.<name>.url::
+submodule.<name>.update::
+ The path within this project, URL, and the updating strategy
+ for a submodule. These variables are initially populated
+ by 'git submodule init'; edit them to override the
+ URL and other values found in the `.gitmodules` file. See
+ linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+
+submodule.<name>.fetchRecurseSubmodules::
+ This option can be used to control recursive fetching of this
+ submodule. It can be overridden by using the --[no-]recurse-submodules
+ command line option to "git fetch" and "git pull".
+ This setting will override that from in the linkgit:gitmodules[5]
+ file.
+
+submodule.<name>.ignore::
+ Defines under what circumstances "git status" and the diff family show
+ a submodule as modified. When set to "all", it will never be considered
+ modified, "dirty" will ignore all changes to the submodules work tree and
+ takes only differences between the HEAD of the submodule and the commit
+ recorded in the superproject into account. "untracked" will additionally
+ let submodules with modified tracked files in their work tree show up.
+ Using "none" (the default when this option is not set) also shows
+ submodules that have untracked files in their work tree as changed.
+ This setting overrides any setting made in .gitmodules for this submodule,
+ both settings can be overridden on the command line by using the
+ "--ignore-submodules" option.
+
tar.umask::
This variable can be used to restrict the permission bits of
tar archive entries. The default is 0002, which turns off the
archiving user's umask will be used instead. See umask(2) and
linkgit:git-archive[1].
+transfer.unpackLimit::
+ When `fetch.unpackLimit` or `receive.unpackLimit` are
+ not set, the value of this variable is used instead.
+ The default value is 100.
+
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
+url.<base>.pushInsteadOf::
+ Any URL that starts with this value will not be pushed to;
+ instead, it will be rewritten to start with <base>, and the
+ resulting URL will be pushed to. In cases where some site serves
+ a large number of repositories, and serves them with multiple
+ access methods, some of which do not allow push, this feature
+ allows people to specify a pull-only URL and have git
+ automatically use an appropriate URL to push, even for a
+ never-before-seen repository on the site. When more than one
+ pushInsteadOf strings match a given URL, the longest match is
+ used. If a remote has an explicit pushurl, git will ignore this
+ setting for that remote.
+
user.email::
Your email address to be recorded in any newly created commits.
Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and
unchanged to gpg's --local-user parameter, so you may specify a key
using any method that gpg supports.
-imap::
- The configuration variables in the 'imap' section are described
- in linkgit:git-imap-send[1].
-
-receive.fsckObjects::
- If it is set to true, git-receive-pack will check all received
- objects. It will abort in the case of a malformed object or a
- broken link. The result of an abort are only dangling objects.
- Defaults to false.
-
-receive.unpackLimit::
- If the number of objects received in a push is below this
- limit then the objects will be unpacked into loose object
- files. However if the number of received objects equals or
- exceeds this limit then the received pack will be stored as
- a pack, after adding any missing delta bases. Storing the
- pack from a push can make the push operation complete faster,
- especially on slow filesystems. If not set, the value of
- `transfer.unpackLimit` is used instead.
-
-receive.denyNonFastForwards::
- If set to true, git-receive-pack will deny a ref update which is
- not a fast forward. Use this to prevent such an update via a push,
- even if that push is forced. This configuration variable is
- set when initializing a shared repository.
-
-transfer.unpackLimit::
- When `fetch.unpackLimit` or `receive.unpackLimit` are
- not set, the value of this variable is used instead.
- The default value is 100.
-
web.browser::
Specify a web browser that may be used by some commands.
Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]