dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive, allow only alphanumeric
characters and `-`, and must start with an alphabetic character. Some
-variables may appear multiple times.
+variables may appear multiple times; we say then that the variable is
+multivalued.
Syntax
~~~~~~
The file consists of sections and variables. A section begins with
the name of the section in square brackets and continues until the next
-section begins. Section names are not case sensitive. Only alphanumeric
+section begins. Section names are case-insensitive. Only alphanumeric
characters, `-` and `.` are allowed in section names. Each variable
must belong to some section, which means that there must be a section
header before the first setting of a variable.
--------
Subsection names are case sensitive and can contain any characters except
-newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`,
-respectively). Section headers cannot span multiple
+newline (doublequote `"` and backslash can be included by escaping them
+as `\"` and `\\`, respectively). Section headers cannot span multiple
lines. Variables may belong directly to a section or to a given subsection.
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form
-'name = value'. If there is no equal sign on the line, the entire line
-is taken as 'name' and the variable is recognized as boolean "true".
+'name = value' (or just 'name', which is a short-hand to say that
+the variable is the boolean "true").
The variable names are case-insensitive, allow only alphanumeric characters
-and `-`, and must start with an alphabetic character. There can be more
-than one value for a given variable; we say then that the variable is
-multivalued.
+and `-`, and must start with an alphabetic character.
-Leading and trailing whitespace in a variable value is discarded.
-Internal whitespace within a variable value is retained verbatim.
+A line that defines a value can be continued to the next line by
+ending it with a `\`; the backquote and the end-of-line are
+stripped. Leading whitespaces after 'name =', the remainder of the
+line after the first comment character '#' or ';', and trailing
+whitespaces of the line are discarded unless they are enclosed in
+double quotes. Internal whitespaces within the value are retained
+verbatim.
-The values following the equals sign in variable assign are all either
-a string, an integer, or a boolean. Boolean values may be given as yes/no,
-1/0, true/false or on/off. Case is not significant in boolean values, when
-converting value to the canonical form using '--bool' type specifier;
-'git config' will ensure that the output is "true" or "false".
-
-String values may be entirely or partially enclosed in double quotes.
-You need to enclose variable values in double quotes if you want to
-preserve leading or trailing whitespace, or if the variable value contains
-comment characters (i.e. it contains '#' or ';').
-Double quote `"` and backslash `\` characters in variable values must
-be escaped: use `\"` for `"` and `\\` for `\`.
+Inside double quotes, double quote `"` and backslash `\` characters
+must be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
and `\b` for backspace (BS). Other char escape sequences (including octal
escape sequences) are invalid.
-Variable values ending in a `\` are continued on the next line in the
-customary UNIX fashion.
-
-Some variables may require a special value format.
Includes
~~~~~~~~
path = foo ; expand "foo" relative to the current file
path = ~/foo ; expand "foo" in your $HOME directory
+
+Values
+~~~~~~
+
+Values of many variables are treated as a simple string, but there
+are variables that take values of specific types and there are rules
+as to how to spell them.
+
+boolean::
+
+ When a variable is said to take a boolean value, many
+ synonyms are accepted for 'true' and 'false'; these are all
+ case-insensitive.
+
+ true;; Boolean true can be spelled as `yes`, `on`, `true`,
+ or `1`. Also, a variable defined without `= <value>`
+ is taken as true.
+
+ false;; Boolean false can be spelled as `no`, `off`,
+ `false`, or `0`.
++
+When converting value to the canonical form using '--bool' type
+specifier; 'git config' will ensure that the output is "true" or
+"false" (spelled in lowercase).
+
+integer::
+ The value for many variables that specify various sizes can
+ be suffixed with `k`, `M`,... to mean "scale the number by
+ 1024", "by 1024x1024", etc.
+
+color::
+ The value for a variables that takes a color is a list of
+ colors (at most two) and attributes (at most one), separated
+ by spaces. The colors accepted are `normal`, `black`,
+ `red`, `green`, `yellow`, `blue`, `magenta`, `cyan` and
+ `white`; the attributes are `bold`, `dim`, `ul`, `blink` and
+ `reverse`. The first color given is the foreground; the
+ second is the background. The position of the attribute, if
+ any, doesn't matter. Attributes may be turned off
+ specifically by prefixing them with `no` (e.g., `noreverse`,
+ `noul`, etc).
++
+Colors (foreground and background) may also be given as numbers between
+0 and 255; these use ANSI 256-color mode (but note that not all
+terminals may support this). If your terminal supports it, you may also
+specify 24-bit RGB values as hex, like `#ff0ab3`.
++
+The attributes are meant to be reset at the beginning of each item
+in the colored output, so setting color.decorate.branch to `black`
+will paint that branch name in a plain `black`, even if the previous
+thing on the same output line (e.g. opening parenthesis before the
+list of branch names in `log --decorate` output) is set to be
+painted with `bold` or some other attribute.
+
+
Variables
~~~~~~~~~
for abbreviated object names to stay unique for sufficiently long
time.
-add.ignore-errors::
add.ignoreErrors::
+add.ignore-errors (deprecated)::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
- option of linkgit:git-add[1]. Older versions of Git accept only
- `add.ignore-errors`, which does not follow the usual naming
- convention for configuration variables. Newer versions of Git
- honor `add.ignoreErrors` as well.
+ option of linkgit:git-add[1]. `add.ignore-errors` is deprecated,
+ as it does not follow the usual naming convention for configuration
+ variables.
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
`remote` (a remote-tracking branch in refs/remotes/),
`upstream` (upstream tracking branch), `plain` (other
refs).
-+
-The value for these configuration variables is a list of colors (at most
-two) and attributes (at most one), separated by spaces. The colors
-accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`,
-`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
-`blink` and `reverse`. The first color given is the foreground; the
-second is the background. The position of the attribute, if any,
-doesn't matter. Attributes may be turned off specifically by prefixing
-them with `no` (e.g., `noreverse`, `noul`, etc).
-+
-Colors (foreground and background) may also be given as numbers between
-0 and 255; these use ANSI 256-color mode (but note that not all
-terminals may support this). If your terminal supports it, you may also
-specify 24-bit RGB values as hex, like `#ff0ab3`.
color.diff::
Whether to use ANSI escape sequences to add color to patches.
of `plain` (context text), `meta` (metainformation), `frag`
(hunk header), 'func' (function in hunk header), `old` (removed lines),
`new` (added lines), `commit` (commit headers), or `whitespace`
- (highlighting whitespace errors). The values of these variables may be
- specified as in color.branch.<slot>.
+ (highlighting whitespace errors).
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
separators between fields on a line (`:`, `-`, and `=`)
and between hunks (`--`)
--
-+
-The values of these variables may be specified as in color.branch.<slot>.
color.interactive::
When set to `always`, always use colors for interactive prompts
Use customized color for 'git add --interactive' and 'git clean
--interactive' output. `<slot>` may be `prompt`, `header`, `help`
or `error`, for four distinct types of normal output from
- interactive commands. The values of these variables may be
- specified as in color.branch.<slot>.
+ interactive commands.
color.pager::
A boolean to enable/disable colored output when the pager is in
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
`untracked` (files which are not tracked by Git),
- `branch` (the current branch), or
+ `branch` (the current branch),
`nobranch` (the color the 'no branch' warning is shown in, defaulting
- to red). The values of these variables may be specified as in
- color.branch.<slot>.
+ to red), or
+ `unmerged` (files which have unmerged changes).
color.ui::
This variable determines the default value for variables such
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
linkgit:git-whatchanged[1] assume `--use-mailmap`.
+mailinfo.scissors::
+ If true, makes linkgit:git-mailinfo[1] (and therefore
+ linkgit:git-am[1]) act by default as if the --scissors option
+ was provided on the command-line. When active, this features
+ removes everything from the message body before a scissors
+ line (i.e. consisting mainly of ">8", "8<" and "-").
+
mailmap.file::
The location of an augmenting mailmap file. The default
mailmap, located in the root of the repository, is loaded
true. You should not generally need to turn this off unless
you are debugging pack bitmaps.
-pack.writebitmaps::
+pack.writebitmaps (deprecated)::
This is a deprecated synonym for `repack.writeBitmaps`.
pack.writeBitmapHashCache::
See linkgit:git-send-email[1] for description. Note that this
setting is not subject to the 'identity' mechanism.
-sendemail.smtpssl::
+sendemail.smtpssl (deprecated)::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
sendemail.smtpsslcertpath::
sendemail.xmailer::
See linkgit:git-send-email[1] for description.
-sendemail.signedoffcc::
+sendemail.signedoffcc (deprecated)::
Deprecated alias for 'sendemail.signedoffbycc'.
showbranch.default::
submodule.<name>.path::
submodule.<name>.url::
+ The path within this project and URL for a submodule. These
+ variables are initially populated by 'git submodule init'. See
+ linkgit:git-submodule[1] and linkgit:gitmodules[5] for
+ details.
+
submodule.<name>.update::
- The path within this project, URL, and the updating strategy
- for a submodule. These variables are initially populated
- by 'git submodule init'; edit them to override the
- URL and other values found in the `.gitmodules` file. See
- linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+ The default update procedure for a submodule. This variable
+ is populated by `git submodule init` from the
+ linkgit:gitmodules[5] file. See description of 'update'
+ command in linkgit:git-submodule[1].
submodule.<name>.branch::
The remote branch name for a submodule, used by `git submodule