append_todo_help () {
gettext "
Commands:
- p, pick = use commit
- r, reword = use commit, but edit the commit message
- e, edit = use commit, but stop for amending
- s, squash = use commit, but meld into previous commit
- f, fixup = like \"squash\", but discard this commit's log message
- x, exec = run command (the rest of the line) using shell
- d, drop = remove commit
+p, pick = use commit
+r, reword = use commit, but edit the commit message
+e, edit = use commit, but stop for amending
+s, squash = use commit, but meld into previous commit
+f, fixup = like \"squash\", but discard this commit's log message
+x, exec = run command (the rest of the line) using shell
+d, drop = remove commit
These lines can be re-ordered; they are executed from top to bottom.
" | git stripspace --comment-lines >>"$todo"
done
}
-# skip picking commits whose parents are unchanged
-skip_unnecessary_picks () {
- fd=3
- while read -r command rest
- do
- # fd=3 means we skip the command
- case "$fd,$command" in
- 3,pick|3,p)
- # pick a commit whose parent is current $onto -> skip
- sha1=${rest%% *}
- case "$(git rev-parse --verify --quiet "$sha1"^)" in
- "$onto"*)
- onto=$sha1
- ;;
- *)
- fd=1
- ;;
- esac
- ;;
- 3,"$comment_char"*|3,)
- # copy comments
- ;;
- *)
- fd=1
- ;;
- esac
- printf '%s\n' "$command${rest:+ }$rest" >&$fd
- done <"$todo" >"$todo.new" 3>>"$done" &&
- mv -f "$todo".new "$todo" &&
- case "$(peek_next_command)" in
- squash|s|fixup|f)
- record_in_rewritten "$onto"
- ;;
- esac ||
- die "$(gettext "Could not skip unnecessary pick commands")"
-}
-
-transform_todo_ids () {
- while read -r command rest
- do
- case "$command" in
- "$comment_char"* | exec)
- # Be careful for oddball commands like 'exec'
- # that do not have a SHA-1 at the beginning of $rest.
- ;;
- *)
- sha1=$(git rev-parse --verify --quiet "$@" ${rest%%[ ]*}) &&
- rest="$sha1 ${rest#*[ ]}"
- ;;
- esac
- printf '%s\n' "$command${rest:+ }$rest"
- done <"$todo" >"$todo.new" &&
- mv -f "$todo.new" "$todo"
-}
-
expand_todo_ids() {
- transform_todo_ids
+ git rebase--helper --expand-ids
}
collapse_todo_ids() {
- transform_todo_ids --short
-}
-
-# Rearrange the todo list that has both "pick sha1 msg" and
-# "pick sha1 fixup!/squash! msg" appears in it so that the latter
-# comes immediately after the former, and change "pick" to
-# "fixup"/"squash".
-#
-# Note that if the config has specified a custom instruction format
-# each log message will be re-retrieved in order to normalize the
-# autosquash arrangement
-rearrange_squash () {
- # extract fixup!/squash! lines and resolve any referenced sha1's
- while read -r pick sha1 message
- do
- test -z "${format}" || message=$(git log -n 1 --format="%s" ${sha1})
- case "$message" in
- "squash! "*|"fixup! "*)
- action="${message%%!*}"
- rest=$message
- prefix=
- # skip all squash! or fixup! (but save for later)
- while :
- do
- case "$rest" in
- "squash! "*|"fixup! "*)
- prefix="$prefix${rest%%!*},"
- rest="${rest#*! }"
- ;;
- *)
- break
- ;;
- esac
- done
- printf '%s %s %s %s\n' "$sha1" "$action" "$prefix" "$rest"
- # if it's a single word, try to resolve to a full sha1 and
- # emit a second copy. This allows us to match on both message
- # and on sha1 prefix
- if test "${rest#* }" = "$rest"; then
- fullsha="$(git rev-parse -q --verify "$rest" 2>/dev/null)"
- if test -n "$fullsha"; then
- # prefix the action to uniquely identify this line as
- # intended for full sha1 match
- echo "$sha1 +$action $prefix $fullsha"
- fi
- fi
- esac
- done >"$1.sq" <"$1"
- test -s "$1.sq" || return
-
- used=
- while read -r pick sha1 message
- do
- case " $used" in
- *" $sha1 "*) continue ;;
- esac
- printf '%s\n' "$pick $sha1 $message"
- test -z "${format}" || message=$(git log -n 1 --format="%s" ${sha1})
- used="$used$sha1 "
- while read -r squash action msg_prefix msg_content
- do
- case " $used" in
- *" $squash "*) continue ;;
- esac
- emit=0
- case "$action" in
- +*)
- action="${action#+}"
- # full sha1 prefix test
- case "$msg_content" in "$sha1"*) emit=1;; esac ;;
- *)
- # message prefix test
- case "$message" in "$msg_content"*) emit=1;; esac ;;
- esac
- if test $emit = 1; then
- if test -n "${format}"
- then
- msg_content=$(git log -n 1 --format="${format}" ${squash})
- else
- msg_content="$(echo "$msg_prefix" | sed "s/,/! /g")$msg_content"
- fi
- printf '%s\n' "$action $squash $msg_content"
- used="$used$squash "
- fi
- done <"$1.sq"
- done >"$1.rearranged" <"$1"
- cat "$1.rearranged" >"$1"
- rm -f "$1.sq" "$1.rearranged"
+ git rebase--helper --shorten-ids
}
# Add commands after a pick or after a squash/fixup serie
mv "$1.new" "$1"
}
-# Check if the SHA-1 passed as an argument is a
-# correct one, if not then print $2 in "$todo".badsha
-# $1: the SHA-1 to test
-# $2: the line number of the input
-# $3: the input filename
-check_commit_sha () {
- badsha=0
- if test -z "$1"
- then
- badsha=1
- else
- sha1_verif="$(git rev-parse --verify --quiet $1^{commit})"
- if test -z "$sha1_verif"
- then
- badsha=1
- fi
- fi
-
- if test $badsha -ne 0
- then
- line="$(sed -n -e "${2}p" "$3")"
- warn "$(eval_gettext "\
-Warning: the SHA-1 is missing or isn't a commit in the following line:
- - \$line")"
- warn
- fi
-
- return $badsha
-}
-
-# prints the bad commits and bad commands
-# from the todolist in stdin
-check_bad_cmd_and_sha () {
- retval=0
- lineno=0
- while read -r command rest
- do
- lineno=$(( $lineno + 1 ))
- case $command in
- "$comment_char"*|''|noop|x|exec)
- # Doesn't expect a SHA-1
- ;;
- "$cr")
- # Work around CR left by "read" (e.g. with Git for
- # Windows' Bash).
- ;;
- pick|p|drop|d|reword|r|edit|e|squash|s|fixup|f)
- if ! check_commit_sha "${rest%%[ ]*}" "$lineno" "$1"
- then
- retval=1
- fi
- ;;
- *)
- line="$(sed -n -e "${lineno}p" "$1")"
- warn "$(eval_gettext "\
-Warning: the command isn't recognized in the following line:
- - \$line")"
- warn
- retval=1
- ;;
- esac
- done <"$1"
- return $retval
-}
-
-# Print the list of the SHA-1 of the commits
-# from stdin to stdout
-todo_list_to_sha_list () {
- git stripspace --strip-comments |
- while read -r command sha1 rest
- do
- case $command in
- "$comment_char"*|''|noop|x|"exec")
- ;;
- *)
- long_sha=$(git rev-list --no-walk "$sha1" 2>/dev/null)
- printf "%s\n" "$long_sha"
- ;;
- esac
- done
-}
-
-# Use warn for each line in stdin
-warn_lines () {
- while read -r line
- do
- warn " - $line"
- done
-}
-
# Switch to the branch in $into and notify it in the reflog
checkout_onto () {
GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name"
printf '%s' "$check_level" | tr 'A-Z' 'a-z'
}
-# Check if the user dropped some commits by mistake
-# Behaviour determined by rebase.missingCommitsCheck.
-# Check if there is an unrecognized command or a
-# bad SHA-1 in a command.
-check_todo_list () {
- raise_error=f
-
- check_level=$(get_missing_commit_check_level)
-
- case "$check_level" in
- warn|error)
- # Get the SHA-1 of the commits
- todo_list_to_sha_list <"$todo".backup >"$todo".oldsha1
- todo_list_to_sha_list <"$todo" >"$todo".newsha1
-
- # Sort the SHA-1 and compare them
- sort -u "$todo".oldsha1 >"$todo".oldsha1+
- mv "$todo".oldsha1+ "$todo".oldsha1
- sort -u "$todo".newsha1 >"$todo".newsha1+
- mv "$todo".newsha1+ "$todo".newsha1
- comm -2 -3 "$todo".oldsha1 "$todo".newsha1 >"$todo".miss
-
- # Warn about missing commits
- if test -s "$todo".miss
- then
- test "$check_level" = error && raise_error=t
-
- warn "$(gettext "\
-Warning: some commits may have been dropped accidentally.
-Dropped commits (newer to older):")"
-
- # Make the list user-friendly and display
- opt="--no-walk=sorted --format=oneline --abbrev-commit --stdin"
- git rev-list $opt <"$todo".miss | warn_lines
-
- warn "$(gettext "\
-To avoid this message, use \"drop\" to explicitly remove a commit.
-
-Use 'git config rebase.missingCommitsCheck' to change the level of warnings.
-The possible behaviours are: ignore, warn, error.")"
- warn
- fi
- ;;
- ignore)
- ;;
- *)
- warn "$(eval_gettext "Unrecognized setting \$check_level for option rebase.missingCommitsCheck. Ignoring.")"
- ;;
- esac
-
- if ! check_bad_cmd_and_sha "$todo"
- then
- raise_error=t
- fi
-
- if test $raise_error = t
- then
- # Checkout before the first commit of the
- # rebase: this way git rebase --continue
- # will work correctly as it expects HEAD to be
- # placed before the commit of the next action
- checkout_onto
-
- warn "$(gettext "You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.")"
- die "$(gettext "Or you can abort the rebase with 'git rebase --abort'.")"
- fi
-}
-
# The whole contents of this file is run by dot-sourcing it from
# inside a shell function. It used to be that "return"s we see
# below were not inside any function, and expected to return
revisions=$onto...$orig_head
shortrevisions=$shorthead
fi
-format=$(git config --get rebase.instructionFormat)
-# the 'rev-list .. | sed' requires %m to parse; the instruction requires %H to parse
-git rev-list $merges_option --format="%m%H ${format:-%s}" \
- --reverse --left-right --topo-order \
- $revisions ${restrict_revision+^$restrict_revision} | \
- sed -n "s/^>//p" |
-while read -r sha1 rest
-do
-
- if test -z "$keep_empty" && is_empty_commit $sha1 && ! is_merge_commit $sha1
- then
- comment_out="$comment_char "
- else
- comment_out=
- fi
+if test t != "$preserve_merges"
+then
+ git rebase--helper --make-script ${keep_empty:+--keep-empty} \
+ $revisions ${restrict_revision+^$restrict_revision} >"$todo"
+else
+ format=$(git config --get rebase.instructionFormat)
+ # the 'rev-list .. | sed' requires %m to parse; the instruction requires %H to parse
+ git rev-list $merges_option --format="%m%H ${format:-%s}" \
+ --reverse --left-right --topo-order \
+ $revisions ${restrict_revision+^$restrict_revision} | \
+ sed -n "s/^>//p" |
+ while read -r sha1 rest
+ do
+
+ if test -z "$keep_empty" && is_empty_commit $sha1 && ! is_merge_commit $sha1
+ then
+ comment_out="$comment_char "
+ else
+ comment_out=
+ fi
- if test t != "$preserve_merges"
- then
- printf '%s\n' "${comment_out}pick $sha1 $rest" >>"$todo"
- else
if test -z "$rebase_root"
then
preserve=t
touch "$rewritten"/$sha1
printf '%s\n' "${comment_out}pick $sha1 $rest" >>"$todo"
fi
- fi
-done
+ done
+fi
# Watch for commits that been dropped by --cherry-pick
if test t = "$preserve_merges"
fi
test -s "$todo" || echo noop >> "$todo"
-test -n "$autosquash" && rearrange_squash "$todo"
+test -z "$autosquash" || git rebase--helper --rearrange-squash || exit
test -n "$cmd" && add_exec_commands "$todo"
todocount=$(git stripspace --strip-comments <"$todo" | wc -l)
has_action "$todo" ||
return 2
-check_todo_list
+git rebase--helper --check-todo-list || {
+ ret=$?
+ checkout_onto
+ exit $ret
+}
expand_todo_ids
-test -d "$rewritten" || test -n "$force_rebase" || skip_unnecessary_picks
+test -d "$rewritten" || test -n "$force_rebase" ||
+onto="$(git rebase--helper --skip-unnecessary-picks)" ||
+die "Could not skip unnecessary pick commands"
checkout_onto
if test -z "$rebase_root" && test ! -d "$rewritten"