sub usage {
print <<EOT;
-git-send-email [options] <file | directory>...
-Options:
- --from Specify the "From:" line of the email to be sent.
-
- --to Specify the primary "To:" line of the email.
-
- --cc Specify an initial "Cc:" list for the entire series
- of emails.
-
- --cc-cmd Specify a command to execute per file which adds
- per file specific cc address entries
-
- --bcc Specify a list of email addresses that should be Bcc:
- on all the emails.
-
- --compose Use \$GIT_EDITOR, core.editor, \$EDITOR, or \$VISUAL to edit
- an introductory message for the patch series.
-
- --subject Specify the initial "Subject:" line.
- Only necessary if --compose is also set. If --compose
- is not set, this will be prompted for.
-
- --in-reply-to Specify the first "In-Reply-To:" header line.
- Only used if --compose is also set. If --compose is not
- set, this will be prompted for.
-
- --chain-reply-to If set, the replies will all be to the previous
- email sent, rather than to the first email sent.
- Defaults to on.
-
- --signed-off-cc Automatically add email addresses that appear in
- Signed-off-by: or Cc: lines to the cc: list. Defaults to on.
-
- --identity The configuration identity, a subsection to prioritise over
- the default section.
-
- --smtp-server If set, specifies the outgoing SMTP server to use.
- Defaults to localhost. Port number can be specified here with
- hostname:port format or by using --smtp-server-port option.
-
- --smtp-server-port Specify a port on the outgoing SMTP server to connect to.
-
- --smtp-user The username for SMTP-AUTH.
-
- --smtp-pass The password for SMTP-AUTH.
-
- --smtp-ssl If set, connects to the SMTP server using SSL.
-
- --suppress-cc Suppress the specified category of auto-CC. The category
- can be one of 'author' for the patch author, 'self' to
- avoid copying yourself, 'sob' for Signed-off-by lines,
- 'cccmd' for the output of the cccmd, or 'all' to suppress
- all of these.
-
- --suppress-from Suppress sending emails to yourself. Defaults to off.
-
- --thread Specify that the "In-Reply-To:" header should be set on all
- emails. Defaults to on.
-
- --quiet Make git-send-email less verbose. One line per email
- should be all that is output.
-
- --dry-run Do everything except actually send the emails.
-
- --envelope-sender Specify the envelope sender used to send the emails.
-
- --no-validate Don't perform any sanity checks on patches.
+git send-email [options] <file | directory>...
+
+ Composing:
+ --from <str> * Email From:
+ --to <str> * Email To:
+ --cc <str> * Email Cc:
+ --bcc <str> * Email Bcc:
+ --subject <str> * Email "Subject:"
+ --in-reply-to <str> * Email "In-Reply-To:"
+ --compose * Open an editor for introduction.
+
+ Sending:
+ --envelope-sender <str> * Email envelope sender.
+ --smtp-server <str:int> * Outgoing SMTP server to use. The port
+ is optional. Default 'localhost'.
+ --smtp-server-port <int> * Outgoing SMTP server port.
+ --smtp-user <str> * Username for SMTP-AUTH.
+ --smtp-pass <str> * Password for SMTP-AUTH; not necessary.
+ --smtp-encryption <str> * tls or ssl; anything else disables.
+ --smtp-ssl * Deprecated. Use '--smtp-encryption ssl'.
+
+ Automating:
+ --identity <str> * Use the sendemail.<id> options.
+ --cc-cmd <str> * Email Cc: via `<str> \$patch_path`
+ --suppress-cc <str> * author, self, sob, cccmd, all.
+ --[no-]signed-off-by-cc * Send to Cc: and Signed-off-by:
+ addresses. Default on.
+ --[no-]suppress-from * Send to self. Default off.
+ --[no-]chain-reply-to * Chain In-Reply-To: fields. Default on.
+ --[no-]thread * Use In-Reply-To: field. Default on.
+
+ Administering:
+ --quiet * Output one line of info per email.
+ --dry-run * Don't actually send the emails.
+ --[no-]validate * Perform patch sanity checks. Default on.
EOT
exit(1);
# Example reply to:
#$initial_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
-my $repo = Git->repository();
+my $repo = eval { Git->repository() };
+my @repo = $repo ? ($repo) : ();
my $term = eval {
$ENV{"GIT_SEND_EMAIL_NOTTY"}
? new Term::ReadLine 'git-send-email', \*STDIN, \*STDOUT
# Variables with corresponding config settings
my ($thread, $chain_reply_to, $suppress_from, $signed_off_cc, $cc_cmd);
-my ($smtp_server, $smtp_server_port, $smtp_authuser, $smtp_ssl);
+my ($smtp_server, $smtp_server_port, $smtp_authuser, $smtp_encryption);
my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts);
-my ($no_validate);
+my ($validate);
my (@suppress_cc);
my %config_bool_settings = (
"chainreplyto" => [\$chain_reply_to, 1],
"suppressfrom" => [\$suppress_from, undef],
"signedoffcc" => [\$signed_off_cc, undef],
- "smtpssl" => [\$smtp_ssl, 0],
+ "validate" => [\$validate, 1],
);
my %config_settings = (
"smtpuser" => \$smtp_authuser,
"smtppass" => \$smtp_authpass,
"to" => \@to,
+ "cc" => \@initial_cc,
"cccmd" => \$cc_cmd,
"aliasfiletype" => \$aliasfiletype,
"bcc" => \@bcclist,
"aliasesfile" => \@alias_files,
"suppresscc" => \@suppress_cc,
+ "envelopesender" => \$envelope_sender,
);
# Handle Uncouth Termination
"smtp-server-port=s" => \$smtp_server_port,
"smtp-user=s" => \$smtp_authuser,
"smtp-pass:s" => \$smtp_authpass,
- "smtp-ssl!" => \$smtp_ssl,
+ "smtp-ssl" => sub { $smtp_encryption = 'ssl' },
+ "smtp-encryption=s" => \$smtp_encryption,
"identity=s" => \$identity,
"compose" => \$compose,
"quiet" => \$quiet,
"dry-run" => \$dry_run,
"envelope-sender=s" => \$envelope_sender,
"thread!" => \$thread,
- "no-validate" => \$no_validate,
+ "validate!" => \$validate,
);
unless ($rc) {
foreach my $setting (keys %config_bool_settings) {
my $target = $config_bool_settings{$setting}->[0];
- $$target = $repo->config_bool("$prefix.$setting") unless (defined $$target);
+ $$target = Git::config_bool(@repo, "$prefix.$setting") unless (defined $$target);
}
foreach my $setting (keys %config_settings) {
my $target = $config_settings{$setting};
if (ref($target) eq "ARRAY") {
unless (@$target) {
- my @values = $repo->config("$prefix.$setting");
+ my @values = Git::config(@repo, "$prefix.$setting");
@$target = @values if (@values && defined $values[0]);
}
}
else {
- $$target = $repo->config("$prefix.$setting") unless (defined $$target);
+ $$target = Git::config(@repo, "$prefix.$setting") unless (defined $$target);
+ }
+ }
+
+ if (!defined $smtp_encryption) {
+ my $enc = Git::config(@repo, "$prefix.smtpencryption");
+ if (defined $enc) {
+ $smtp_encryption = $enc;
+ } elsif (Git::config_bool(@repo, "$prefix.smtpssl")) {
+ $smtp_encryption = 'ssl';
}
}
}
# read configuration from [sendemail "$identity"], fall back on [sendemail]
-$identity = $repo->config("sendemail.identity") unless (defined $identity);
+$identity = Git::config(@repo, "sendemail.identity") unless (defined $identity);
read_config("sendemail.$identity") if (defined $identity);
read_config("sendemail");
${$setting->[0]} = $setting->[1] unless (defined (${$setting->[0]}));
}
+# 'default' encryption is none -- this only prevents a warning
+$smtp_encryption = '' unless (defined $smtp_encryption);
+
# Set CC suppressions
my(%suppress_cc);
if (@suppress_cc) {
}
}
-my ($repoauthor) = $repo->ident_person('author');
-my ($repocommitter) = $repo->ident_person('committer');
+my ($repoauthor, $repocommitter);
+($repoauthor) = Git::ident_person(@repo, 'author');
+($repocommitter) = Git::ident_person(@repo, 'committer');
# Verify the user input
push @files, grep { -f $_ } map { +$f . "/" . $_ }
sort readdir(DH);
- } elsif (-f $f) {
+ } elsif (-f $f or -p $f) {
push @files, $f;
} else {
}
}
-if (!$no_validate) {
+if ($validate) {
foreach my $f (@files) {
- my $error = validate_patch($f);
- $error and die "fatal: $f: $error\nwarning: no patches were sent\n";
+ unless (-p $f) {
+ my $error = validate_patch($f);
+ $error and die "fatal: $f: $error\nwarning: no patches were sent\n";
+ }
}
}
my $prompting = 0;
if (!defined $sender) {
- $sender = $repoauthor || $repocommitter;
+ $sender = $repoauthor || $repocommitter || '';
while (1) {
$_ = $term->readline("Who should the emails appear to be from? [$sender] ");
}
my $to = $_;
- push @to, split /,/, $to;
+ push @to, split /,\s*/, $to;
$prompting++;
}
EOT
close(C);
- my $editor = $ENV{GIT_EDITOR} || $repo->config("core.editor") || $ENV{VISUAL} || $ENV{EDITOR} || "vi";
- system('sh', '-c', '$0 $@', $editor, $compose_filename);
+ my $editor = $ENV{GIT_EDITOR} || Git::config(@repo, "core.editor") || $ENV{VISUAL} || $ENV{EDITOR} || "vi";
+ system('sh', '-c', $editor.' "$@"', $editor, $compose_filename);
open(C2,">",$compose_filename . ".final")
or die "Failed to open $compose_filename.final : " . $!;
die "The required SMTP server is not properly defined."
}
- if ($smtp_ssl) {
+ if ($smtp_encryption eq 'ssl') {
$smtp_server_port ||= 465; # ssmtp
require Net::SMTP::SSL;
$smtp ||= Net::SMTP::SSL->new($smtp_server, Port => $smtp_server_port);
$smtp ||= Net::SMTP->new((defined $smtp_server_port)
? "$smtp_server:$smtp_server_port"
: $smtp_server);
+ if ($smtp_encryption eq 'tls') {
+ require Net::SMTP::SSL;
+ $smtp->command('STARTTLS');
+ $smtp->response();
+ if ($smtp->code == 220) {
+ $smtp = Net::SMTP::SSL->start_SSL($smtp)
+ or die "STARTTLS failed! ".$smtp->message;
+ $smtp_encryption = '';
+ # Send EHLO again to receive fresh
+ # supported commands
+ $smtp->hello();
+ } else {
+ die "Server does not support STARTTLS! ".$smtp->message;
+ }
+ }
}
if (!$smtp) {
}
elsif (/^Content-type:/i) {
$has_content_type = 1;
- if (/charset="?[^ "]+/) {
+ if (/charset="?([^ "]+)/) {
$body_encoding = $1;
}
push @xh, $_;