git-remote-mediawiki: allow a domain to be set for authentication
[gitweb.git] / git-bisect.sh
index b2186a86279e8919214bb205400a05f32a316c3b..e0ca3fb853083d0ebdfe11e5eb3fead4723248ad 100755 (executable)
@@ -2,38 +2,47 @@
 
 USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]'
 LONG_USAGE='git bisect help
-        print this long help message.
-git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
-        reset bisect state and start bisection.
+       print this long help message.
+git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
+       reset bisect state and start bisection.
 git bisect bad [<rev>]
-        mark <rev> a known-bad revision.
+       mark <rev> a known-bad revision.
 git bisect good [<rev>...]
-        mark <rev>... known-good revisions.
+       mark <rev>... known-good revisions.
 git bisect skip [(<rev>|<range>)...]
-        mark <rev>... untestable revisions.
+       mark <rev>... untestable revisions.
 git bisect next
-        find next bisection to test and check it out.
+       find next bisection to test and check it out.
 git bisect reset [<commit>]
-        finish bisection search and go back to commit.
+       finish bisection search and go back to commit.
 git bisect visualize
-        show bisect status in gitk.
+       show bisect status in gitk.
 git bisect replay <logfile>
-        replay bisection log.
+       replay bisection log.
 git bisect log
-        show bisect log.
+       show bisect log.
 git bisect run <cmd>...
-        use <cmd>... to automatically bisect.
+       use <cmd>... to automatically bisect.
 
 Please use "git help bisect" to get the full man page.'
 
 OPTIONS_SPEC=
 . git-sh-setup
 . git-sh-i18n
-require_work_tree
 
 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
 
+bisect_head()
+{
+       if test -f "$GIT_DIR/BISECT_HEAD"
+       then
+               echo BISECT_HEAD
+       else
+               echo HEAD
+       fi
+}
+
 bisect_autostart() {
        test -s "$GIT_DIR/BISECT_START" || {
                (
@@ -45,7 +54,7 @@ bisect_autostart() {
                        # TRANSLATORS: Make sure to include [Y] and [n] in your
                        # translation. The program will only accept English input
                        # at this point.
-           gettext "Do you want me to do it for you [Y/n]? " >&2
+                       gettext "Do you want me to do it for you [Y/n]? " >&2
                        read yesno
                        case "$yesno" in
                        [Nn]*)
@@ -59,6 +68,50 @@ bisect_autostart() {
 }
 
 bisect_start() {
+       #
+       # Check for one bad and then some good revisions.
+       #
+       has_double_dash=0
+       for arg; do
+               case "$arg" in --) has_double_dash=1; break ;; esac
+       done
+       orig_args=$(git rev-parse --sq-quote "$@")
+       bad_seen=0
+       eval=''
+       if test "z$(git rev-parse --is-bare-repository)" != zfalse
+       then
+               mode=--no-checkout
+       else
+               mode=''
+       fi
+       while [ $# -gt 0 ]; do
+               arg="$1"
+               case "$arg" in
+               --)
+                       shift
+                       break
+               ;;
+               --no-checkout)
+                       mode=--no-checkout
+                       shift ;;
+               --*)
+                       die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
+               *)
+                       rev=$(git rev-parse -q --verify "$arg^{commit}") || {
+                               test $has_double_dash -eq 1 &&
+                               die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
+                               break
+                       }
+                       case $bad_seen in
+                       0) state='bad' ; bad_seen=1 ;;
+                       *) state='good' ;;
+                       esac
+                       eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
+                       shift
+                       ;;
+               esac
+       done
+
        #
        # Verify HEAD.
        #
@@ -74,7 +127,10 @@ bisect_start() {
        then
                # Reset to the rev from where we started.
                start_head=$(cat "$GIT_DIR/BISECT_START")
-               git checkout "$start_head" -- || exit
+               if test "z$mode" != "z--no-checkout"
+               then
+                       git checkout "$start_head" --
+               fi
        else
                # Get rev from where we start.
                case "$head" in
@@ -97,39 +153,6 @@ bisect_start() {
        #
        bisect_clean_state || exit
 
-       #
-       # Check for one bad and then some good revisions.
-       #
-       has_double_dash=0
-       for arg; do
-           case "$arg" in --) has_double_dash=1; break ;; esac
-       done
-       orig_args=$(git rev-parse --sq-quote "$@")
-       bad_seen=0
-       eval=''
-       while [ $# -gt 0 ]; do
-           arg="$1"
-           case "$arg" in
-           --)
-               shift
-               break
-               ;;
-           *)
-               rev=$(git rev-parse -q --verify "$arg^{commit}") || {
-                   test $has_double_dash -eq 1 &&
-                       die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
-                   break
-               }
-               case $bad_seen in
-               0) state='bad' ; bad_seen=1 ;;
-               *) state='good' ;;
-               esac
-               eval="$eval bisect_write '$state' '$rev' 'nolog'; "
-               shift
-               ;;
-           esac
-       done
-
        #
        # Change state.
        # In case of mistaken revs or checkout error, or signals received,
@@ -143,9 +166,12 @@ bisect_start() {
        #
        # Write new start state.
        #
-       echo "$start_head" >"$GIT_DIR/BISECT_START" &&
+       echo "$start_head" >"$GIT_DIR/BISECT_START" && {
+               test "z$mode" != "z--no-checkout" ||
+               git update-ref --no-deref BISECT_HEAD "$start_head"
+       } &&
        git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
-       eval "$eval" &&
+       eval "$eval true" &&
        echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
        #
        # Check if we can proceed to the next bisect state.
@@ -176,7 +202,8 @@ is_expected_rev() {
 
 check_expected_revs() {
        for _rev in "$@"; do
-               if ! is_expected_rev "$_rev"; then
+               if ! is_expected_rev "$_rev"
+               then
                        rm -f "$GIT_DIR/BISECT_ANCESTORS_OK"
                        rm -f "$GIT_DIR/BISECT_EXPECTED_REV"
                        return
@@ -185,18 +212,18 @@ check_expected_revs() {
 }
 
 bisect_skip() {
-        all=''
+       all=''
        for arg in "$@"
        do
-           case "$arg" in
-            *..*)
-               revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
-            *)
-                revs=$(git rev-parse --sq-quote "$arg") ;;
-           esac
-            all="$all $revs"
-        done
-        eval bisect_state 'skip' $all
+               case "$arg" in
+               *..*)
+                       revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
+               *)
+                       revs=$(git rev-parse --sq-quote "$arg") ;;
+               esac
+               all="$all $revs"
+       done
+       eval bisect_state 'skip' $all
 }
 
 bisect_state() {
@@ -206,8 +233,8 @@ bisect_state() {
        0,*)
                die "$(gettext "Please call 'bisect_state' with at least one argument.")" ;;
        1,bad|1,good|1,skip)
-               rev=$(git rev-parse --verify HEAD) ||
-                       die "$(gettext "Bad rev input: HEAD")"
+               rev=$(git rev-parse --verify $(bisect_head)) ||
+                       die "$(gettext "Bad rev input: $(bisect_head)")"
                bisect_write "$state" "$rev"
                check_expected_revs "$rev" ;;
        2,bad|*,good|*,skip)
@@ -291,10 +318,10 @@ bisect_next() {
        bisect_next_check good
 
        # Perform all bisection computation, display and checkout
-       git bisect--helper --next-all
+       git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
        res=$?
 
-        # Check if we should exit because bisection is finished
+       # Check if we should exit because bisection is finished
        test $res -eq 10 && exit 0
 
        # Check for an error in the bisection process
@@ -309,7 +336,8 @@ bisect_visualize() {
        if test $# = 0
        then
                if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
-                  type gitk >/dev/null 2>&1; then
+                       type gitk >/dev/null 2>&1
+               then
                        set gitk
                else
                        set git log
@@ -333,19 +361,20 @@ bisect_reset() {
        case "$#" in
        0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
        1) git rev-parse --quiet --verify "$1^{commit}" > /dev/null || {
-              invalid="$1"
-              die "$(eval_gettext "'\$invalid' is not a valid commit")"
-          }
-          branch="$1" ;;
+                       invalid="$1"
+                       die "$(eval_gettext "'\$invalid' is not a valid commit")"
+               }
+               branch="$1" ;;
        *)
-           usage ;;
+               usage ;;
        esac
-       if git checkout "$branch" -- ; then
-               bisect_clean_state
-       else
+
+       if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" --
+       then
                die "$(eval_gettext "Could not check out original HEAD '\$branch'.
 Try 'git bisect reset <commit>'.")"
        fi
+       bisect_clean_state
 }
 
 bisect_clean_state() {
@@ -362,7 +391,8 @@ bisect_clean_state() {
        rm -f "$GIT_DIR/BISECT_RUN" &&
        # Cleanup head-name if it got left by an old version of git-bisect
        rm -f "$GIT_DIR/head-name" &&
-
+       git update-ref -d --no-deref BISECT_HEAD &&
+       # clean up BISECT_START last
        rm -f "$GIT_DIR/BISECT_START"
 }
 
@@ -374,7 +404,8 @@ bisect_replay () {
        while read git bisect command rev
        do
                test "$git $bisect" = "git bisect" -o "$git" = "git-bisect" || continue
-               if test "$git" = "git-bisect"; then
+               if test "$git" = "git-bisect"
+               then
                        rev="$command"
                        command="$bisect"
                fi
@@ -392,65 +423,71 @@ bisect_replay () {
 }
 
 bisect_run () {
-    bisect_next_check fail
-
-    while true
-    do
-      command="$@"
-      eval_gettext "running \$command"; echo
-      "$@"
-      res=$?
-
-      # Check for really bad run error.
-      if [ $res -lt 0 -o $res -ge 128 ]; then
-         (
-           eval_gettext "bisect run failed:
+       bisect_next_check fail
+
+       while true
+       do
+               command="$@"
+               eval_gettext "running \$command"; echo
+               "$@"
+               res=$?
+
+               # Check for really bad run error.
+               if [ $res -lt 0 -o $res -ge 128 ]
+               then
+                       (
+                               eval_gettext "bisect run failed:
 exit code \$res from '\$command' is < 0 or >= 128" &&
-           echo
-         ) >&2
-         exit $res
-      fi
-
-      # Find current state depending on run success or failure.
-      # A special exit code of 125 means cannot test.
-      if [ $res -eq 125 ]; then
-         state='skip'
-      elif [ $res -gt 0 ]; then
-         state='bad'
-      else
-         state='good'
-      fi
-
-      # We have to use a subshell because "bisect_state" can exit.
-      ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
-      res=$?
-
-      cat "$GIT_DIR/BISECT_RUN"
-
-      if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
-               > /dev/null; then
-         (
-             gettext "bisect run cannot continue any more" &&
-             echo
-         ) >&2
-         exit $res
-      fi
-
-      if [ $res -ne 0 ]; then
-         (
-             eval_gettext "bisect run failed:
+                               echo
+                       ) >&2
+                       exit $res
+               fi
+
+               # Find current state depending on run success or failure.
+               # A special exit code of 125 means cannot test.
+               if [ $res -eq 125 ]
+               then
+                       state='skip'
+               elif [ $res -gt 0 ]
+               then
+                       state='bad'
+               else
+                       state='good'
+               fi
+
+               # We have to use a subshell because "bisect_state" can exit.
+               ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
+               res=$?
+
+               cat "$GIT_DIR/BISECT_RUN"
+
+               if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
+                       > /dev/null
+               then
+                       (
+                               gettext "bisect run cannot continue any more" &&
+                               echo
+                       ) >&2
+                       exit $res
+               fi
+
+               if [ $res -ne 0 ]
+               then
+                       (
+                               eval_gettext "bisect run failed:
 'bisect_state \$state' exited with error code \$res" &&
-             echo
-         ) >&2
-         exit $res
-      fi
+                               echo
+                       ) >&2
+                       exit $res
+               fi
 
-      if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
-         gettext "bisect run success"; echo
-         exit 0;
-      fi
+               if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null
+               then
+                       gettext "bisect run success"; echo
+                       exit 0;
+               fi
 
-    done
+       done
 }
 
 bisect_log () {
@@ -460,33 +497,33 @@ bisect_log () {
 
 case "$#" in
 0)
-    usage ;;
+       usage ;;
 *)
-    cmd="$1"
-    shift
-    case "$cmd" in
-    help)
-        git bisect -h ;;
-    start)
-        bisect_start "$@" ;;
-    bad|good)
-        bisect_state "$cmd" "$@" ;;
-    skip)
-        bisect_skip "$@" ;;
-    next)
-        # Not sure we want "next" at the UI level anymore.
-        bisect_next "$@" ;;
-    visualize|view)
-       bisect_visualize "$@" ;;
-    reset)
-        bisect_reset "$@" ;;
-    replay)
-       bisect_replay "$@" ;;
-    log)
-       bisect_log ;;
-    run)
-        bisect_run "$@" ;;
-    *)
-        usage ;;
-    esac
+       cmd="$1"
+       shift
+       case "$cmd" in
+       help)
+               git bisect -h ;;
+       start)
+               bisect_start "$@" ;;
+       bad|good)
+               bisect_state "$cmd" "$@" ;;
+       skip)
+               bisect_skip "$@" ;;
+       next)
+               # Not sure we want "next" at the UI level anymore.
+               bisect_next "$@" ;;
+       visualize|view)
+               bisect_visualize "$@" ;;
+       reset)
+               bisect_reset "$@" ;;
+       replay)
+               bisect_replay "$@" ;;
+       log)
+               bisect_log ;;
+       run)
+               bisect_run "$@" ;;
+       *)
+               usage ;;
+       esac
 esac