In this syntax, subsection names follow the same restrictions as for section
names.
-All the other lines are recognized as setting variables, in the form
+All the other lines (and the remainder of the line after the section
+header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
The variable names are case-insensitive and only alphanumeric
in the appropriate manual page. You will find a description of non-core
porcelain configuration variables in the respective porcelain documentation.
+advice.*::
+ When set to 'true', display the given optional help message.
+ When set to 'false', do not display. The configuration variables
+ are:
++
+--
+ pushNonFastForward::
+ Advice shown when linkgit:git-push[1] refuses
+ non-fast-forward refs. Default: true.
+ statusHints::
+ Directions on how to stage/unstage/add shown in the
+ output of linkgit:git-status[1] and the template shown
+ when writing commit messages. Default: true.
+--
+
core.fileMode::
If false, the executable bit differences between the index and
the working copy are ignored; useful on broken filesystems like FAT.
Commands such as `commit` and `tag` that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
- `GIT_EDITOR` is not set. The order of preference is
- `GIT_EDITOR` environment, `core.editor`, `VISUAL` and
- `EDITOR` environment variables and then finally `vi`.
+ `GIT_EDITOR` is not set. See linkgit:git-var[1].
core.pager::
The command that git will use to paginate output. Can
consider them as errors. You can prefix `-` to disable
any of them (e.g. `-trailing-space`):
+
-* `trailing-space` treats trailing whitespaces at the end of the line
+* `blank-at-eol` treats trailing whitespaces at the end of the line
as an error (enabled by default).
* `space-before-tab` treats a space character that appears immediately
before a tab character in the initial indent part of the line as an
error (enabled by default).
* `indent-with-non-tab` treats a line that is indented with 8 or more
space characters as an error (not enabled by default).
+* `blank-at-eof` treats blank lines added at the end of file as an error
+ (enabled by default).
+* `trailing-space` is a short-hand to cover both `blank-at-eol` and
+ `blank-at-eof`.
* `cr-at-eol` treats a carriage-return at the end of line as
part of the line terminator, i.e. with it, `trailing-space`
does not trigger if the character before such a carriage-return
Set this config setting to 'rename' there; However, This will remove the
check that makes sure that existing object files will not get overwritten.
+core.notesRef::
+ When showing commit messages, also show notes which are stored in
+ the given ref. This ref is expected to contain files named
+ after the full SHA-1 of the commit they annotate.
++
+If such a file exists in the given ref, the referenced blob is read, and
+appended to the commit message, separated by a "Notes:" line. If the
+given ref itself does not exist, it is not an error, but means that no
+notes should be printed.
++
+This setting defaults to "refs/notes/commits", and can be overridden by
+the `GIT_NOTES_REF` environment variable.
+
add.ignore-errors::
Tells 'git-add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
executed from the top-level directory of a repository, which may
not necessarily be the current directory.
+apply.ignorewhitespace::
+ When set to 'change', tells 'git-apply' to ignore changes in
+ whitespace, in the same way as the '--ignore-space-change'
+ option.
+ When set to one of: no, none, never, false tells 'git-apply' to
+ respect all whitespace differences.
+ See linkgit:git-apply[1].
+
apply.whitespace::
Tells 'git-apply' how to handle whitespaces, in the same way
as the '--whitespace' option. See linkgit:git-apply[1].
branch.<name>.mergeoptions::
Sets default options for merging into branch <name>. The syntax and
- supported options are equal to that of linkgit:git-merge[1], but
+ supported options are the same as those of linkgit:git-merge[1], but
option values containing whitespace characters are currently not
supported.
A boolean to enable/disable colored output when the pager is in
use (default is true).
+color.showbranch::
+ A boolean to enable/disable color in the output of
+ linkgit:git-show-branch[1]. May be set to `always`,
+ `false` (or `never`) or `auto` (or `true`), in which case colors are used
+ only when the output is to a terminal. Defaults to false.
+
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment
variable.
+http.sslCertPasswordProtected::
+ Enable git's password prompt for the SSL certificate. Otherwise
+ OpenSSL will prompt the user, possibly many times, if the
+ certificate or private key is encrypted. Can be overridden by the
+ 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.
+
http.sslCAInfo::
File containing the certificates to verify the peer with when
fetching or pushing over HTTPS. Can be overridden by the
How many HTTP requests to launch in parallel. Can be overridden
by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
+http.postBuffer::
+ Maximum size in bytes of the buffer used by smart HTTP
+ transports when POSTing data to the remote system.
+ For requests larger than this buffer size, HTTP/1.1 and
+ Transfer-Encoding: chunked is used to avoid creating a
+ massive pack file locally. Default is 1 MiB, which is
+ sufficient for most requests.
+
http.lowSpeedLimit, http.lowSpeedTime::
If the HTTP transfer speed is less than 'http.lowSpeedLimit'
for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
- linkgit:git-pack-objects[1].
- A value of 0 means no limit. Defaults to 0.
+ linkgit:git-pack-objects[1] before writing them out to a pack.
+ This cache is used to speed up the writing object phase by not
+ having to recompute the final delta result once the best match
+ for all objects is found. Repacking large repositories on machines
+ which are tight with memory might be badly impacted by this though,
+ especially if this cache pushes the system into swapping.
+ A value of 0 means no limit. The smallest size of 1 byte may be
+ used to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit::
The maximum size of a delta, that is cached in
- linkgit:git-pack-objects[1]. Defaults to 1000.
+ linkgit:git-pack-objects[1]. This cache is used to speed up the
+ writing object phase by not having to recompute the final delta
+ result once the best match for all objects is found. Defaults to 1000.
pack.threads::
Specifies the number of threads to spawn when searching for best
Whether to show a diffstat of what changed upstream since the last
rebase. False by default.
+receive.autogc::
+ By default, git-receive-pack will run "git-gc --auto" after
+ receiving data from git-push and updating refs. You can stop
+ it by setting this variable to false.
+
receive.fsckObjects::
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
receive.denyNonFastForwards::
If set to true, git-receive-pack will deny a ref update which is
- not a fast forward. Use this to prevent such an update via a push,
+ not a fast-forward. Use this to prevent such an update via a push,
even if that push is forced. This configuration variable is
set when initializing a shared repository.
+receive.updateserverinfo::
+ If set to true, git-receive-pack will run git-update-server-info
+ after receiving data from git-push and updating refs.
+
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
+remote.<name>.pushurl::
+ The push URL of a remote repository. See linkgit:git-push[1].
+
remote.<name>.proxy::
For remotes that require curl (http, https and ftp), the URL to
the proxy to use for that remote. Set to the empty string to
default enabled if you create `rr-cache` directory under
`$GIT_DIR`, but can be disabled by setting this option to false.
+sendemail.identity::
+ A configuration identity. When given, causes values in the
+ 'sendemail.<identity>' subsection to take precedence over
+ values in the 'sendemail' section. The default identity is
+ the value of 'sendemail.identity'.
+
+sendemail.smtpencryption::
+ See linkgit:git-send-email[1] for description. Note that this
+ setting is not subject to the 'identity' mechanism.
+
+sendemail.smtpssl::
+ Deprecated alias for 'sendemail.smtpencryption = ssl'.
+
+sendemail.<identity>.*::
+ Identity-specific versions of the 'sendemail.*' parameters
+ found below, taking precedence over those when the this
+ identity is selected, through command-line or
+ 'sendemail.identity'.
+
+sendemail.aliasesfile::
+sendemail.aliasfiletype::
+sendemail.bcc::
+sendemail.cc::
+sendemail.cccmd::
+sendemail.chainreplyto::
+sendemail.confirm::
+sendemail.envelopesender::
+sendemail.from::
+sendemail.multiedit::
+sendemail.signedoffbycc::
+sendemail.smtppass::
+sendemail.suppresscc::
+sendemail.suppressfrom::
+sendemail.to::
+sendemail.smtpserver::
+sendemail.smtpserverport::
+sendemail.smtpuser::
+sendemail.thread::
+sendemail.validate::
+ See linkgit:git-send-email[1] for description.
+
+sendemail.signedoffcc::
+ Deprecated alias for 'sendemail.signedoffbycc'.
+
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
+url.<base>.pushInsteadOf::
+ Any URL that starts with this value will not be pushed to;
+ instead, it will be rewritten to start with <base>, and the
+ resulting URL will be pushed to. In cases where some site serves
+ a large number of repositories, and serves them with multiple
+ access methods, some of which do not allow push, this feature
+ allows people to specify a pull-only URL and have git
+ automatically use an appropriate URL to push, even for a
+ never-before-seen repository on the site. When more than one
+ pushInsteadOf strings match a given URL, the longest match is
+ used. If a remote has an explicit pushurl, git will ignore this
+ setting for that remote.
+
user.email::
Your email address to be recorded in any newly created commits.
Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and