precedence), `.gitattributes` file in the same directory as the
path in question, and its parent directories up to the toplevel of the
work tree (the further the directory that contains `.gitattributes`
-is from the path in question, the lower its precedence).
+is from the path in question, the lower its precedence). Finally
+global and system-wide files are considered (they have the lowest
+precedence).
If you wish to affect only a single repository (i.e., to assign
-attributes to files that are particular to one user's workflow), then
+attributes to files that are particular to
+one user's workflow for that repository), then
attributes should be placed in the `$GIT_DIR/info/attributes` file.
Attributes which should be version-controlled and distributed to other
repositories (i.e., attributes of interest to all users) should go into
-`.gitattributes` files.
+`.gitattributes` files. Attributes that should affect all repositories
+for a single user should be placed in a file specified by the
+`core.attributesfile` configuration option (see linkgit:git-config[1]).
+Attributes for all users on a system should be placed in the
+`$(prefix)/etc/gitattributes` file.
Sometimes you would need to override an setting of an attribute
for a path to `unspecified` state. This can be done by listing
text file is normalized, its line endings are converted to LF in the
repository. To control what line ending style is used in the working
directory, use the `eol` attribute for a single file and the
-`core.autocrlf` configuration variable for all text files.
+`core.eol` configuration variable for all text files.
Set::
Unspecified::
- If the `text` attribute is unspecified, git uses the `eol`
- attribute and the `core.autocrlf` configuration variable to
- determine if the file should be converted.
+ If the `text` attribute is unspecified, git uses the
+ `core.autocrlf` configuration variable to determine if the
+ file should be converted.
Any other value causes git to act as if `text` has been left
unspecified.
This attribute sets a specific line-ending style to be used in the
working directory. It enables end-of-line normalization without any
-content checks, similar to setting the `text` attribute.
+content checks, effectively setting the `text` attribute.
Set to string value "crlf"::
- This setting forces git to normalize line endings on checkin
- and convert them to CRLF when the file is checked out,
- regardless of `text` and `core.autocrlf`.
+ This setting forces git to normalize line endings for this
+ file on checkin and convert them to CRLF when the file is
+ checked out.
Set to string value "lf"::
This setting forces git to normalize line endings to LF on
checkin and prevents conversion to CRLF when the file is
- checked out, regardless of `text` and `core.autocrlf`.
+ checked out.
Backwards compatibility with `crlf` attribute
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This does not force normalization of all text files, but does ensure
that text files that you introduce to the repository have their line
endings normalized to LF when they are added, and that files that are
-already normalized in the repository stay normalized. You can also
-set `autocrlf` to "input" to have automatic normalization of new text
-files without conversion to CRLF in the working directory.
+already normalized in the repository stay normalized.
If you want to interoperate with a source code management system that
enforces end-of-line normalization, or you simply want all text files
------------------------
This ensures that all files that git considers to be text will have
-normalized (LF) line endings in the repository.
+normalized (LF) line endings in the repository. The `core.eol`
+configuration variable controls which line endings git will use for
+normalized files in your working directory; the default is to use the
+native line ending for your platform, or CRLF if `core.autocrlf` is
+set.
NOTE: When `text=auto` normalization is enabled in an existing
repository, any text files containing CRLFs should be normalized. If
smudge = cat
------------------------
+For best results, `clean` should not alter its output further if it is
+run twice ("clean->clean" should be equivalent to "clean"), and
+multiple `smudge` commands should not alter `clean`'s output
+("smudge->smudge->clean" should be equivalent to "clean"). See the
+section on merging below.
+
+The "indent" filter is well-behaved in this regard: it will not modify
+input that is already correctly indented. In this case, the lack of a
+smudge filter means that the clean filter _must_ accept its own output
+without modifying it.
+
+Sequence "%f" on the filter command line is replaced with the name of
+the file the filter is working on. A filter might use this in keyword
+substitution. For example:
+
+------------------------
+[filter "p4"]
+ clean = git-p4-filter --clean %f
+ smudge = git-p4-filter --smudge %f
+------------------------
+
Interaction between checkin/checkout attributes
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
with `text`, and then `ident` and fed to `filter`.
+Merging branches with differing checkin/checkout attributes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If you have added attributes to a file that cause the canonical
+repository format for that file to change, such as adding a
+clean/smudge filter or text/eol/ident attributes, merging anything
+where the attribute is not in place would normally cause merge
+conflicts.
+
+To prevent these unnecessary merge conflicts, git can be told to run a
+virtual check-out and check-in of all three stages of a file when
+resolving a three-way merge by setting the `merge.renormalize`
+configuration variable. This prevents changes caused by check-in
+conversion from causing spurious merge conflicts when a converted file
+is merged with an unconverted file.
+
+As long as a "smudge->clean" results in the same output as a "clean"
+even on files that are already smudged, this strategy will
+automatically resolve all filter-related conflicts. Filters that do
+not act in this way may cause additional merge conflicts that must be
+resolved manually.
+
+
Generating diff text
~~~~~~~~~~~~~~~~~~~~
- `cpp` suitable for source code in the C and C++ languages.
+- `csharp` suitable for source code in the C# language.
+
+- `fortran` suitable for source code in the Fortran language.
+
- `html` suitable for HTML/XHTML documents.
- `java` suitable for source code in the Java language.
- `pascal` suitable for source code in the Pascal/Delphi language.
+- `perl` suitable for source code in the Perl language.
+
- `php` suitable for source code in the PHP language.
- `python` suitable for source code in the Python language.
Customizing word diff
^^^^^^^^^^^^^^^^^^^^^
-You can customize the rules that `git diff --color-words` uses to
+You can customize the rules that `git diff --word-diff` uses to
split words in a line, by specifying an appropriate regular expression
in the "diff.*.wordRegex" configuration variable. For example, in TeX
a backslash followed by a sequence of letters forms a command, but
should generate it separately and send it as a comment _in
addition to_ the usual binary diff that you might send.
+Because text conversion can be slow, especially when doing a
+large number of them with `git log -p`, git provides a mechanism
+to cache the output and use it in future diffs. To enable
+caching, set the "cachetextconv" variable in your diff driver's
+config. For example:
+
+------------------------
+[diff "jpg"]
+ textconv = exif
+ cachetextconv = true
+------------------------
+
+This will cache the result of running "exif" on each blob
+indefinitely. If you change the textconv config variable for a
+diff driver, git will automatically invalidate the cache entries
+and re-run the textconv filter. If you want to invalidate the
+cache manually (e.g., because your version of "exif" was updated
+and now produces better output), you can remove the cache
+manually with `git update-ref -d refs/notes/textconv/jpg` (where
+"jpg" is the name of the diff driver, as in the example above).
+
+Marking files as binary
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Git usually guesses correctly whether a blob contains text or binary
+data by examining the beginning of the contents. However, sometimes you
+may want to override its decision, either because a blob contains binary
+data later in the file, or because the content, while technically
+composed of text characters, is opaque to a human reader. For example,
+many postscript files contain only ascii characters, but produce noisy
+and meaningless diffs.
+
+The simplest way to mark a file as binary is to unset the diff
+attribute in the `.gitattributes` file:
+
+------------------------
+*.ps -diff
+------------------------
+
+This will cause git to generate `Binary files differ` (or a binary
+patch, if binary patches are enabled) instead of a regular diff.
+
+However, one may also want to specify other diff driver attributes. For
+example, you might want to use `textconv` to convert postscript files to
+an ascii representation for human viewing, but otherwise treat them as
+binary files. You cannot specify both `-diff` and `diff=ps` attributes.
+The solution is to use the `diff.*.binary` config option:
+
+------------------------
+[diff "ps"]
+ textconv = ps2ascii
+ binary = true
+------------------------
Performing a three-way merge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
version (`%A`) and the other branches' version (`%B`). These
three tokens are replaced with the names of temporary files that
hold the contents of these versions when the command line is
-built.
+built. Additionally, %L will be replaced with the conflict marker
+size (see below).
The merge driver is expected to leave the result of the merge in
the file named with `%A` by overwriting it, and exit with zero
Set::
Notice all types of potential whitespace errors known to git.
+ The tab width is taken from the value of the `core.whitespace`
+ configuration variable.
Unset::
Unspecified::
- Use the value of `core.whitespace` configuration variable to
+ Use the value of the `core.whitespace` configuration variable to
decide what to notice as error.
String::
Specify a comma separate list of common whitespace problems to
- notice in the same format as `core.whitespace` configuration
+ notice in the same format as the `core.whitespace` configuration
variable.