NAME
----
-git-fast-import - Backend for fast Git data importers.
+git-fast-import - Backend for fast Git data importers
SYNOPSIS
This program is usually not what the end user wants to run directly.
Most end users want to use one of the existing frontend programs,
which parses a specific type of foreign source and feeds the contents
-stored there to git-fast-import (gfi).
+stored there to git-fast-import.
-gfi reads a mixed command/data stream from standard input and
+fast-import reads a mixed command/data stream from standard input and
writes one or more packfiles directly into the current repository.
When EOF is received on standard input, fast import writes out
updated branch and tag refs, fully updating the current repository
with the newly imported data.
-The gfi backend itself can import into an empty repository (one that
+The fast-import backend itself can import into an empty repository (one that
has already been initialized by gitlink:git-init[1]) or incrementally
update an existing populated repository. Whether or not incremental
imports are supported from a particular foreign source depends on
-------
--date-format=<fmt>::
Specify the type of dates the frontend will supply to
- gfi within `author`, `committer` and `tagger` commands.
+ fast-import within `author`, `committer` and `tagger` commands.
See ``Date Formats'' below for details about which formats
are supported, and their syntax.
+--force::
+ Force updating modified existing branches, even if doing
+ so would cause commits to be lost (as the new commit does
+ not contain the old commit).
+
--max-pack-size=<n>::
Maximum size of each output packfile, expressed in MiB.
The default is 4096 (4 GiB) as that is the maximum allowed
Dumps the internal marks table to <file> when complete.
Marks are written one per line as `:markid SHA-1`.
Frontends can use this file to validate imports after they
- have been completed.
+ have been completed, or to save the marks table across
+ incremental runs. As <file> is only opened and truncated
+ at checkpoint (or completion) the same path can also be
+ safely given to \--import-marks.
+
+--import-marks=<file>::
+ Before processing any input, load the marks specified in
+ <file>. The input file must exist, must be readable, and
+ must use the same format as produced by \--export-marks.
+ Multiple options may be supplied to import more than one
+ set of marks. If a mark is defined to different values,
+ the last file wins.
+
+--export-pack-edges=<file>::
+ After creating a packfile, print a line of data to
+ <file> listing the filename of the packfile and the last
+ commit on each branch that was written to that packfile.
+ This information may be useful after importing projects
+ whose total object set exceeds the 4 GiB packfile limit,
+ as these commits can be used as edge points during calls
+ to gitlink:git-pack-objects[1].
+
+--quiet::
+ Disable all non-fatal output, making fast-import silent when it
+ is successful. This option disables the output shown by
+ \--stats.
+
+--stats::
+ Display some basic statistics about the objects fast-import has
+ created, the packfiles they were stored into, and the
+ memory used by fast-import during this run. Showing this output
+ is currently the default, but can be disabled with \--quiet.
+
Performance
-----------
-The design of gfi allows it to import large projects in a minimum
+The design of fast-import allows it to import large projects in a minimum
amount of memory usage and processing time. Assuming the frontend
-is able to keep up with gfi and feed it a constant stream of data,
+is able to keep up with fast-import and feed it a constant stream of data,
import times for projects holding 10+ years of history and containing
100,000+ individual commits are generally completed in just 1-2
hours on quite modest (~$2,000 USD) hardware.
Most bottlenecks appear to be in foreign source data access (the
-source just cannot extract revisions fast enough) or disk IO (gfi
+source just cannot extract revisions fast enough) or disk IO (fast-import
writes as fast as the disk will take the data). Imports will run
faster if the source data is stored on a different drive than the
destination Git repository (due to less IO contention).
Development Cost
----------------
-A typical frontend for gfi tends to weigh in at approximately 200
+A typical frontend for fast-import tends to weigh in at approximately 200
lines of Perl/Python/Ruby code. Most developers have been able to
create working importers in just a couple of hours, even though it
-is their first exposure to gfi, and sometimes even to Git. This is
+is their first exposure to fast-import, and sometimes even to Git. This is
an ideal situation, given that most conversion tools are throw-away
(use once, and never look back).
Parallel Operation
------------------
-Like `git-push` or `git-fetch`, imports handled by gfi are safe to
+Like `git-push` or `git-fetch`, imports handled by fast-import are safe to
run alongside parallel `git repack -a -d` or `git gc` invocations,
or any other Git operation (including `git prune`, as loose objects
-are never used by gfi).
+are never used by fast-import).
-However, gfi does not lock the branch or tag refs it is actively
-importing. After EOF, during its ref update phase, gfi blindly
-overwrites each imported branch or tag ref. Consequently it is not
-safe to modify refs that are currently being used by a running gfi
-instance, as work could be lost when gfi overwrites the refs.
+fast-import does not lock the branch or tag refs it is actively importing.
+After the import, during its ref update phase, fast-import tests each
+existing branch ref to verify the update will be a fast-forward
+update (the commit stored in the ref is contained in the new
+history of the commit to be written). If the update is not a
+fast-forward update, fast-import will skip updating that ref and instead
+prints a warning message. fast-import will always attempt to update all
+branch refs, and does not stop on the first failure.
+
+Branch updates can be forced with \--force, but its recommended that
+this only be used on an otherwise quiet repository. Using \--force
+is not necessary for an initial import into an empty repository.
Technical Discussion
--------------------
-gfi tracks a set of branches in memory. Any branch can be created
+fast-import tracks a set of branches in memory. Any branch can be created
or modified at any point during the import process by sending a
`commit` command on the input stream. This design allows a frontend
program to process an unlimited number of branches simultaneously,
generating commits in the order they are available from the source
data. It also simplifies the frontend programs considerably.
-gfi does not use or alter the current working directory, or any
+fast-import does not use or alter the current working directory, or any
file within it. (It does however update the current Git repository,
as referenced by `GIT_DIR`.) Therefore an import frontend may use
the working directory for its own purposes, such as extracting file
revisions from the foreign source. This ignorance of the working
-directory also allows gfi to run very quickly, as it does not
+directory also allows fast-import to run very quickly, as it does not
need to perform any costly file update operations when switching
between branches.
Input Format
------------
With the exception of raw file data (which Git does not interpret)
-the gfi input format is text (ASCII) based. This text based
+the fast-import input format is text (ASCII) based. This text based
format simplifies development and debugging of frontend programs,
especially when a higher level language such as Perl, Python or
Ruby is being used.
-gfi is very strict about its input. Where we say SP below we mean
+fast-import is very strict about its input. Where we say SP below we mean
*exactly* one space. Likewise LF means one (and only one) linefeed.
Supplying additional whitespace characters will cause unexpected
results, such as branch names or file names with leading or trailing
-spaces in their name, or early termination of gfi when it encounters
+spaces in their name, or early termination of fast-import when it encounters
unexpected input.
Date Formats
~~~~~~~~~~~~
The following date formats are supported. A frontend should select
the format it will use for this import by passing the format name
-in the `--date-format=<fmt>` command line option.
+in the \--date-format=<fmt> command line option.
`raw`::
- This is the Git native format and is `<time> SP <tz>`.
- It is also gfi's default format, if `--date-format` was
+ This is the Git native format and is `<time> SP <offutc>`.
+ It is also fast-import's default format, if \--date-format was
not specified.
+
The time of the event is specified by `<time>` as the number of
seconds since the UNIX epoch (midnight, Jan 1, 1970, UTC) and is
written as an ASCII decimal integer.
+
-The timezone is specified by `<tz>` as a positive or negative offset
-from UTC. For example EST (which is typically 5 hours behind GMT)
-would be expressed in `<tz>` by ``-0500'' while GMT is ``+0000''.
+The local offset is specified by `<offutc>` as a positive or negative
+offset from UTC. For example EST (which is 5 hours behind UTC)
+would be expressed in `<tz>` by ``-0500'' while UTC is ``+0000''.
+The local offset does not affect `<time>`; it is used only as an
+advisement to help formatting routines display the timestamp.
+
-If the timezone is not available in the source material, use
-``+0000'', or the most common local timezone. For example many
+If the local offset is not available in the source material, use
+``+0000'', or the most common local offset. For example many
organizations have a CVS repository which has only ever been accessed
by users who are located in the same location and timezone. In this
-case the user's timezone can be easily assumed.
+case a reasonable offset from UTC could be assumed.
+
Unlike the `rfc2822` format, this format is very strict. Any
-variation in formatting will cause gfi to reject the value.
+variation in formatting will cause fast-import to reject the value.
`rfc2822`::
This is the standard email format as described by RFC 2822.
+
An example value is ``Tue Feb 6 11:22:18 2007 -0500''. The Git
-parser is accurate, but a little on the lenient side. Its the
+parser is accurate, but a little on the lenient side. It is the
same parser used by gitlink:git-am[1] when applying patches
received from email.
+
strings which Git will parse wrong, and yet consider valid.
Seriously malformed strings will be rejected.
+
-If the source material is formatted in RFC 2822 style dates,
-the frontend should let gfi handle the parsing and conversion
+Unlike the `raw` format above, the timezone/UTC offset information
+contained in an RFC 2822 date string is used to adjust the date
+value to UTC prior to storage. Therefore it is important that
+this information be as accurate as possible.
++
+If the source material uses RFC 2822 style dates,
+the frontend should let fast-import handle the parsing and conversion
(rather than attempting to do it itself) as the Git parser has
been well tested in the wild.
+
Frontends should prefer the `raw` format if the source material
-is already in UNIX-epoch format, or is easily convertible to
-that format, as there is no ambiguity in parsing.
+already uses UNIX-epoch format, can be coaxed to give dates in that
+format, or its format is easiliy convertible to it, as there is no
+ambiguity in parsing.
`now`::
Always use the current time and timezone. The literal
+
This is a toy format. The current time and timezone of this system
is always copied into the identity string at the time it is being
-created by gfi. There is no way to specify a different time or
+created by fast-import. There is no way to specify a different time or
timezone.
+
This particular format is supplied as its short to implement and
Commands
~~~~~~~~
-gfi accepts several commands to update the current repository
+fast-import accepts several commands to update the current repository
and control the current import process. More detailed discussion
(with examples) of each command follows later.
needed to perform an import.
`checkpoint`::
- Forces gfi to close the current packfile, generate its
+ Forces fast-import to close the current packfile, generate its
unique SHA-1 checksum and index, and start a new packfile.
This command is optional and is not needed to perform
an import.
data
('from' SP <committish> LF)?
('merge' SP <committish> LF)?
- (filemodify | filedelete)*
+ (filemodify | filedelete | filedeleteall)*
LF
....
`<ref>` must be a valid refname in Git. As `LF` is not valid in
a Git refname, no quoting or escaping syntax is supported here.
-A `mark` command may optionally appear, requesting gfi to save a
+A `mark` command may optionally appear, requesting fast-import to save a
reference to the newly created commit for future use by the frontend
(see below for format). It is very common for frontends to mark
every commit they create, thereby allowing future branch creation
message (see below for `data` command syntax). To import an empty
commit message use a 0 length data. Commit messages are free-form
and are not interpreted by Git. Currently they must be encoded in
-UTF-8, as gfi does not permit other encodings to be specified.
+UTF-8, as fast-import does not permit other encodings to be specified.
-Zero or more `filemodify` and `filedelete` commands may be
-included to update the contents of the branch prior to the commit.
-These commands can be supplied in any order, gfi is not sensitive
-to pathname or operation ordering.
+Zero or more `filemodify`, `filedelete` and `filedeleteall` commands
+may be included to update the contents of the branch prior to
+creating the commit. These commands may be supplied in any order.
+However it is recommended that a `filedeleteall` command preceed
+all `filemodify` commands in the same commit, as `filedeleteall`
+wipes the branch clean (see below).
`author`
^^^^^^^^
An `author` command may optionally appear, if the author information
might differ from the committer information. If `author` is omitted
-then gfi will automatically use the committer's information for
+then fast-import will automatically use the committer's information for
the author portion of the commit. See below for a description of
the fields in `author`, as they are identical to `committer`.
`LT` and `LF`. It is typically UTF-8 encoded.
The time of the change is specified by `<when>` using the date format
-that was selected by the `--date-format=<fmt>` command line option.
+that was selected by the \--date-format=<fmt> command line option.
See ``Date Formats'' above for the set of supported formats, and
their syntax.
`from`
^^^^^^
-Only valid for the first commit made on this branch by this
-gfi process. The `from` command is used to specify the commit
-to initialize this branch from. This revision will be the first
-ancestor of the new commit.
-
-Omitting the `from` command in the first commit of a new branch will
-cause gfi to create that commit with no ancestor. This tends to be
-desired only for the initial commit of a project. Omitting the
-`from` command on existing branches is required, as the current
-commit on that branch is automatically assumed to be the first
-ancestor of the new commit.
+The `from` command is used to specify the commit to initialize
+this branch from. This revision will be the first ancestor of the
+new commit.
+
+Omitting the `from` command in the first commit of a new branch
+will cause fast-import to create that commit with no ancestor. This
+tends to be desired only for the initial commit of a project.
+Omitting the `from` command on existing branches is usually desired,
+as the current commit on that branch is automatically assumed to
+be the first ancestor of the new commit.
As `LF` is not valid in a Git refname or SHA-1 expression, no
quoting or escaping syntax is supported within `<committish>`.
Here `<committish>` is any of the following:
-* The name of an existing branch already in gfi's internal branch
- table. If gfi doesn't know the name, its treated as a SHA-1
+* The name of an existing branch already in fast-import's internal branch
+ table. If fast-import doesn't know the name, its treated as a SHA-1
expression.
* A mark reference, `:<idnum>`, where `<idnum>` is the mark number.
+
-The reason gfi uses `:` to denote a mark reference is this character
+The reason fast-import uses `:` to denote a mark reference is this character
is not legal in a Git branch name. The leading `:` makes it easy
to distingush between the mark 42 (`:42`) and the branch 42 (`42`
or `refs/heads/42`), or an abbreviated SHA-1 which happened to
----
from refs/heads/branch^0
----
-The `^0` suffix is necessary as gfi does not permit a branch to
+The `{caret}0` suffix is necessary as fast-import does not permit a branch to
start from itself, and the branch is created in memory before the
-`from` command is even read from the input. Adding `^0` will force
-gfi to resolve the commit through Git's revision parsing library,
+`from` command is even read from the input. Adding `{caret}0` will force
+fast-import to resolve the commit through Git's revision parsing library,
rather than its internal branch table, thereby loading in the
existing value of the branch.
^^^^^^^
Includes one additional ancestor commit, and makes the current
commit a merge commit. An unlimited number of `merge` commands per
-commit are permitted by gfi, thereby establishing an n-way merge.
+commit are permitted by fast-import, thereby establishing an n-way merge.
However Git's other tools never create commits with more than 15
additional ancestors (forming a 16-way merge). For this reason
it is suggested that frontends do not use more than 15 `merge`
of files in most projects use this mode. If in doubt, this is
what you want.
* `100755` or `755`: A normal, but executable, file.
-* `140000`: A symlink, the content of the file will be the link target.
+* `120000`: A symlink, the content of the file will be the link target.
In both formats `<path>` is the complete path of the file to be added
(if not already existing) or modified (if already existing).
-A `<path>` string must use UNIX-style directory seperators (forward
+A `<path>` string must use UNIX-style directory separators (forward
slash `/`), may contain any byte other than `LF`, and must not
start with double quote (`"`).
The value of `<path>` must be in canoncial form. That is it must not:
* contain an empty directory component (e.g. `foo//bar` is invalid),
-* end with a directory seperator (e.g. `foo/` is invalid),
-* start with a directory seperator (e.g. `/foo` is invalid),
+* end with a directory separator (e.g. `foo/` is invalid),
+* start with a directory separator (e.g. `/foo` is invalid),
* contain the special component `.` or `..` (e.g. `foo/./bar` and
`foo/../bar` are invalid).
here `<path>` is the complete path of the file to be removed.
See `filemodify` above for a detailed description of `<path>`.
+`filedeleteall`
+^^^^^^^^^^^^^^^
+Included in a `commit` command to remove all files (and also all
+directories) from the branch. This command resets the internal
+branch structure to have no files in it, allowing the frontend
+to subsequently add all interesting files from scratch.
+
+....
+ 'deleteall' LF
+....
+
+This command is extremely useful if the frontend does not know
+(or does not care to know) what files are currently on the branch,
+and therefore cannot generate the proper `filedelete` commands to
+update the content.
+
+Issuing a `filedeleteall` followed by the needed `filemodify`
+commands to set the correct content will produce the same results
+as sending only the needed `filemodify` and `filedelete` commands.
+The `filedeleteall` approach may however require fast-import to use slightly
+more memory per active branch (less than 1 MiB for even most large
+projects); so frontends that can easily obtain only the affected
+paths for a commit are encouraged to do so.
+
`mark`
~~~~~~
-Arranges for gfi to save a reference to the current object, allowing
+Arranges for fast-import to save a reference to the current object, allowing
the frontend to recall this object at a future point in time, without
knowing its SHA-1. Here the current object is the object creation
command the `mark` command appears within. This can be `commit`,
'from' SP <committish> LF
'tagger' SP <name> SP LT <email> GT SP <when> LF
data
- LF
....
where `<name>` is the name of the tag to create.
Tag names are automatically prefixed with `refs/tags/` when stored
in Git, so importing the CVS branch symbol `RELENG-1_0-FINAL` would
-use just `RELENG-1_0-FINAL` for `<name>`, and gfi will write the
+use just `RELENG-1_0-FINAL` for `<name>`, and fast-import will write the
corresponding ref as `refs/tags/RELENG-1_0-FINAL`.
The value of `<name>` must be a valid refname in Git and therefore
message (see below for `data` command syntax). To import an empty
tag message use a 0 length data. Tag messages are free-form and are
not interpreted by Git. Currently they must be encoded in UTF-8,
-as gfi does not permit other encodings to be specified.
+as fast-import does not permit other encodings to be specified.
-Signing annotated tags during import from within gfi is not
+Signing annotated tags during import from within fast-import is not
supported. Trying to include your own PGP/GPG signature is not
recommended, as the frontend does not (easily) have access to the
complete set of bytes which normally goes into such a signature.
-If signing is required, create lightweight tags from within gfi with
+If signing is required, create lightweight tags from within fast-import with
`reset`, then create the annotated versions of those tags offline
with the standard gitlink:git-tag[1] process.
`data`
~~~~~~
Supplies raw data (for use as blob/file content, commit messages, or
-annotated tag messages) to gfi. Data can be supplied using an exact
+annotated tag messages) to fast-import. Data can be supplied using an exact
byte count or delimited with a terminating line. Real frontends
intended for production-quality conversions should always use the
exact byte count format, as it is more robust and performs better.
-The delimited format is intended primarily for testing gfi.
+The delimited format is intended primarily for testing fast-import.
Exact byte count format::
The frontend must specify the number of bytes of data.
Delimited format::
A delimiter string is used to mark the end of the data.
- gfi will compute the length by searching for the delimiter.
+ fast-import will compute the length by searching for the delimiter.
This format is primarly useful for testing and is not
recommended for real data.
+
+
where `<delim>` is the chosen delimiter string. The string `<delim>`
must not appear on a line by itself within `<raw>`, as otherwise
-gfi will think the data ends earlier than it really does. The `LF`
+fast-import will think the data ends earlier than it really does. The `LF`
immediately trailing `<raw>` is part of `<raw>`. This is one of
the limitations of the delimited format, it is impossible to supply
a data chunk which does not have an LF as its last byte.
`checkpoint`
~~~~~~~~~~~~
-Forces gfi to close the current packfile and start a new one.
-As this requires a significant amount of CPU time and disk IO
-(to compute the overall pack SHA-1 checksum and generate the
-corresponding index file) it can easily take several minutes for
-a single `checkpoint` command to complete.
+Forces fast-import to close the current packfile, start a new one, and to
+save out all current branch refs, tags and marks.
....
'checkpoint' LF
LF
....
+Note that fast-import automatically switches packfiles when the current
+packfile reaches \--max-pack-size, or 4 GiB, whichever limit is
+smaller. During an automatic packfile switch fast-import does not update
+the branch refs, tags or marks.
+
+As a `checkpoint` can require a significant amount of CPU time and
+disk IO (to compute the overall pack SHA-1 checksum, generate the
+corresponding index file, and update the refs) it can easily take
+several minutes for a single `checkpoint` command to complete.
+
+Frontends may choose to issue checkpoints during extremely large
+and long running imports, or when they need to allow another Git
+process access to a branch. However given that a 30 GiB Subversion
+repository can be loaded into Git through fast-import in about 3 hours,
+explicit checkpointing may not be necessary.
+
+
+Tips and Tricks
+---------------
+The following tips and tricks have been collected from various
+users of fast-import, and are offered here as suggestions.
+
+Use One Mark Per Commit
+~~~~~~~~~~~~~~~~~~~~~~~
+When doing a repository conversion, use a unique mark per commit
+(`mark :<n>`) and supply the \--export-marks option on the command
+line. fast-import will dump a file which lists every mark and the Git
+object SHA-1 that corresponds to it. If the frontend can tie
+the marks back to the source repository, it is easy to verify the
+accuracy and completeness of the import by comparing each Git
+commit to the corresponding source revision.
+
+Coming from a system such as Perforce or Subversion this should be
+quite simple, as the fast-import mark can also be the Perforce changeset
+number or the Subversion revision number.
+
+Freely Skip Around Branches
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Don't bother trying to optimize the frontend to stick to one branch
+at a time during an import. Although doing so might be slightly
+faster for fast-import, it tends to increase the complexity of the frontend
+code considerably.
+
+The branch LRU builtin to fast-import tends to behave very well, and the
+cost of activating an inactive branch is so low that bouncing around
+between branches has virtually no impact on import performance.
+
+Handling Renames
+~~~~~~~~~~~~~~~~
+When importing a renamed file or directory, simply delete the old
+name(s) and modify the new name(s) during the corresponding commit.
+Git performs rename detection after-the-fact, rather than explicitly
+during a commit.
+
+Use Tag Fixup Branches
+~~~~~~~~~~~~~~~~~~~~~~
+Some other SCM systems let the user create a tag from multiple
+files which are not from the same commit/changeset. Or to create
+tags which are a subset of the files available in the repository.
+
+Importing these tags as-is in Git is impossible without making at
+least one commit which ``fixes up'' the files to match the content
+of the tag. Use fast-import's `reset` command to reset a dummy branch
+outside of your normal branch space to the base commit for the tag,
+then commit one or more file fixup commits, and finally tag the
+dummy branch.
+
+For example since all normal branches are stored under `refs/heads/`
+name the tag fixup branch `TAG_FIXUP`. This way it is impossible for
+the fixup branch used by the importer to have namespace conflicts
+with real branches imported from the source (the name `TAG_FIXUP`
+is not `refs/heads/TAG_FIXUP`).
+
+When committing fixups, consider using `merge` to connect the
+commit(s) which are supplying file revisions to the fixup branch.
+Doing so will allow tools such as gitlink:git-blame[1] to track
+through the real commit history and properly annotate the source
+files.
+
+After fast-import terminates the frontend will need to do `rm .git/TAG_FIXUP`
+to remove the dummy branch.
+
+Import Now, Repack Later
+~~~~~~~~~~~~~~~~~~~~~~~~
+As soon as fast-import completes the Git repository is completely valid
+and ready for use. Typicallly this takes only a very short time,
+even for considerably large projects (100,000+ commits).
+
+However repacking the repository is necessary to improve data
+locality and access performance. It can also take hours on extremely
+large projects (especially if -f and a large \--window parameter is
+used). Since repacking is safe to run alongside readers and writers,
+run the repack in the background and let it finish when it finishes.
+There is no reason to wait to explore your new Git project!
+
+If you choose to wait for the repack, don't try to run benchmarks
+or performance tests until repacking is completed. fast-import outputs
+suboptimal packfiles that are simply never seen in real use
+situations.
+
+Repacking Historical Data
+~~~~~~~~~~~~~~~~~~~~~~~~~
+If you are repacking very old imported data (e.g. older than the
+last year), consider expending some extra CPU time and supplying
+\--window=50 (or higher) when you run gitlink:git-repack[1].
+This will take longer, but will also produce a smaller packfile.
+You only need to expend the effort once, and everyone using your
+project will benefit from the smaller repository.
+
+
Packfile Optimization
---------------------
-When packing a blob gfi always attempts to deltify against the last
+When packing a blob fast-import always attempts to deltify against the last
blob written. Unless specifically arranged for by the frontend,
this will probably not be a prior version of the same file, so the
generated delta will not be the smallest possible. The resulting
Frontends which have efficient access to all revisions of a
single file (for example reading an RCS/CVS ,v file) can choose
to supply all revisions of that file as a sequence of consecutive
-`blob` commands. This allows gfi to deltify the different file
+`blob` commands. This allows fast-import to deltify the different file
revisions against each other, saving space in the final packfile.
Marks can be used to later identify individual file revisions during
a sequence of `commit` commands.
-The packfile(s) created by gfi do not encourage good disk access
-patterns. This is caused by gfi writing the data in the order
+The packfile(s) created by fast-import do not encourage good disk access
+patterns. This is caused by fast-import writing the data in the order
it is received on standard input, while Git typically organizes
data within packfiles to make the most recent (current tip) data
appear before historical data. Git also clusters commits together,
speeding up revision traversal through better cache locality.
For this reason it is strongly recommended that users repack the
-repository with `git repack -a -d` after gfi completes, allowing
+repository with `git repack -a -d` after fast-import completes, allowing
Git to reorganize the packfiles for faster data access. If blob
deltas are suboptimal (see above) then also adding the `-f` option
to force recomputation of all deltas can significantly reduce the
final packfile size (30-50% smaller can be quite typical).
+
Memory Utilization
------------------
-There are a number of factors which affect how much memory gfi
+There are a number of factors which affect how much memory fast-import
requires to perform an import. Like critical sections of core
-Git, gfi uses its own memory allocators to ammortize any overheads
-associated with malloc. In practice gfi tends to ammoritize any
+Git, fast-import uses its own memory allocators to ammortize any overheads
+associated with malloc. In practice fast-import tends to ammoritize any
malloc overheads to 0, due to its use of large block allocations.
per object
~~~~~~~~~~
-gfi maintains an in-memory structure for every object written in
+fast-import maintains an in-memory structure for every object written in
this execution. On a 32 bit system the structure is 32 bytes,
on a 64 bit system the structure is 40 bytes (due to the larger
pointer sizes). Objects in the table are not deallocated until
-gfi terminates. Importing 2 million objects on a 32 bit system
+fast-import terminates. Importing 2 million objects on a 32 bit system
will require approximately 64 MiB of memory.
The object table is actually a hashtable keyed on the object name
-(the unique SHA-1). This storage configuration allows gfi to reuse
+(the unique SHA-1). This storage configuration allows fast-import to reuse
an existing or already written object and avoid writing duplicates
to the output packfile. Duplicate blobs are surprisingly common
in an import, typically due to branch merges in the source.
Inactive branches are stored in a structure which uses 96 or 120
bytes (32 bit or 64 bit systems, respectively), plus the length of
-the branch name (typically under 200 bytes), per branch. gfi will
+the branch name (typically under 200 bytes), per branch. fast-import will
easily handle as many as 10,000 inactive branches in under 2 MiB
of memory.
branch, their in-memory storage size can grow to a considerable size
(see below).
-gfi automatically moves active branches to inactive status based on
+fast-import automatically moves active branches to inactive status based on
a simple least-recently-used algorithm. The LRU chain is updated on
each `commit` command. The maximum number of active branches can be
-increased or decreased on the command line with `--active-branches=`.
+increased or decreased on the command line with \--active-branches=.
per active tree
~~~~~~~~~~~~~~~
overhead) no matter how many times it occurs within the project.
The active branch LRU, when coupled with the filename string pool
-and lazy loading of subtrees, allows gfi to efficiently import
+and lazy loading of subtrees, allows fast-import to efficiently import
projects with 2,000+ branches and 45,114+ files in a very limited
memory footprint (less than 2.7 MiB per active branch).