$ man git-diff
------------------------------------------------
+It is a good idea to introduce yourself to git before doing any
+operation. The easiest way to do so is:
+
+------------------------------------------------
+$ cat >~/.gitconfig <<\EOF
+[user]
+ name = Your Name Comes Here
+ email = you@yourdomain.example.com
+EOF
+------------------------------------------------
+
+
Importing a new project
-----------------------
You've now initialized the working directory--you may notice a new
directory created, named ".git". Tell git that you want it to track
-every file under the current directory with
+every file under the current directory with (notice the dot '.'
+that means the current directory):
------------------------------------------------
$ git add .
Finally,
------------------------------------------------
-$ git commit -a
+$ git commit
------------------------------------------------
will prompt you for a commit message, then record the current state
to review your changes. When you're done,
------------------------------------------------
-$ git commit -a
+$ git commit file1 file2...
------------------------------------------------
will again prompt your for a message describing the change, and then
-record the new versions of the modified files.
+record the new versions of the files you listed. It is cumbersome
+to list all files and you can say `-a` (which stands for 'all')
+instead.
+
+------------------------------------------------
+$ git commit -a
+------------------------------------------------
A note on commit messages: Though not required, it's a good idea to
begin the commit message with a single short (less than 50 character)
------------------------------------------------
then commit as usual. No special command is required when removing a
-file; just remove it, then commit.
+file; just remove it, then tell `commit` about the file as usual.
At any point you can view the history of your changes using
------------------------------------------------
-$ git whatchanged
+$ git log
------------------------------------------------
If you also want to see complete diffs at each step, use
------------------------------------------------
-$ git whatchanged -p
+$ git log -p
------------------------------------------------
Managing branches
------------------------------------------------
at this point the two branches have diverged, with different changes
-made in each. To merge the changes made in the two branches, run
+made in each. To merge the changes made in experimental into master, run
------------------------------------------------
$ git pull . experimental
This creates a new directory "myrepo" containing a clone of Alice's
repository. The clone is on an equal footing with the original
-project, posessing its own copy of the original project's history.
+project, possessing its own copy of the original project's history.
Bob then makes some changes and commits them:
------------------------------------------------
$ cd /home/alice/project
-$ git pull /home/bob/myrepo
+$ git pull /home/bob/myrepo master
------------------------------------------------
-This actually pulls changes from the branch in Bob's repository named
-"master". Alice could request a different branch by adding the name
-of the branch to the end of the git pull command line.
+This merges the changes from Bob's "master" branch into Alice's
+current branch. If Alice has made her own changes in the meantime,
+then she may need to manually fix any conflicts. (Note that the
+"master" argument in the above command is actually unnecessary, as it
+is the default.)
-This merges Bob's changes into her repository; "git whatchanged" will
-now show the new commits. If Alice has made her own changes in the
-meantime, then Bob's changes will be merged in, and she will need to
-manually fix any conflicts.
+The "pull" command thus performs two operations: it fetches changes
+from a remote branch, then merges them into the current branch.
-A more cautious Alice might wish to examine Bob's changes before
-pulling them. She can do this by creating a temporary branch just
-for the purpose of studying Bob's changes:
+You can perform the first operation alone using the "git fetch"
+command. For example, Alice could create a temporary branch just to
+track Bob's changes, without merging them with her own, using:
-------------------------------------
$ git fetch /home/bob/myrepo master:bob-incoming
-------------------------------------
which fetches the changes from Bob's master branch into a new branch
-named bob-incoming. (Unlike git pull, git fetch just fetches a copy
-of Bob's line of development without doing any merging). Then
+named bob-incoming. Then
-------------------------------------
-$ git whatchanged -p master..bob-incoming
+$ git log -p master..bob-incoming
-------------------------------------
shows a list of all the changes that Bob made since he branched from
Alice's master branch.
-After examing those changes, and possibly fixing things, Alice can
-pull the changes into her master branch:
+After examining those changes, and possibly fixing things, Alice
+could pull the changes into her master branch:
-------------------------------------
$ git checkout master
The last command is a pull from the "bob-incoming" branch in Alice's
own repository.
+Alice could also perform both steps at once with:
+
+-------------------------------------
+$ git pull /home/bob/myrepo master:bob-incoming
+-------------------------------------
+
+This is just like the "git pull /home/bob/myrepo master" that we saw
+before, except that it also stores the unmerged changes from bob's
+master branch in bob-incoming before merging them into Alice's
+current branch. Note that git pull always merges into the current
+branch, regardless of what else is given on the commandline.
+
Later, Bob can update his repo with Alice's latest changes using
-------------------------------------
that various users push changes to; see gitlink:git-push[1] and
link:cvs-migration.html[git for CVS users].
-Keeping track of history
-------------------------
+Exploring history
+-----------------
-Git history is represented as a series of interrelated commits. The
-most recent commit in the currently checked-out branch can always be
-referred to as HEAD, and the "parent" of any commit can always be
-referred to by appending a caret, "^", to the end of the name of the
-commit. So, for example,
+Git history is represented as a series of interrelated commits. We
+have already seen that the git log command can list those commits.
+Note that first line of each git log entry also gives a name for the
+commit:
-------------------------------------
-git diff HEAD^ HEAD
+$ git log
+commit c82a22c39cbc32576f64f5c6b3f24b99ea8149c7
+Author: Junio C Hamano <junkio@cox.net>
+Date: Tue May 16 17:18:22 2006 -0700
+
+ merge-base: Clarify the comments on post processing.
-------------------------------------
-shows the difference between the most-recently checked-in state of
-the tree and the previous state, and
+We can give this name to git show to see the details about this
+commit.
-------------------------------------
-git diff HEAD^^ HEAD^
+$ git show c82a22c39cbc32576f64f5c6b3f24b99ea8149c7
-------------------------------------
-shows the difference between that previous state and the state two
-commits ago. Also, HEAD~5 can be used as a shorthand for HEAD^^^^^,
-and more generally HEAD~n can refer to the nth previous commit.
-Commits representing merges have more than one parent, and you can
-specify which parent to follow in that case; see
-gitlink:git-rev-parse[1].
+But there other ways to refer to commits. You can use any initial
+part of the name that is long enough to uniquely identify the commit:
-The name of a branch can also be used to refer to the most recent
-commit on that branch; so you can also say things like
+-------------------------------------
+$ git show c82a22c39c # the first few characters of the name are
+ # usually enough
+$ git show HEAD # the tip of the current branch
+$ git show experimental # the tip of the "experimental" branch
+-------------------------------------
+
+Every commit has at least one "parent" commit, which points to the
+previous state of the project:
-------------------------------------
-git diff HEAD experimental
+$ git show HEAD^ # to see the parent of HEAD
+$ git show HEAD^^ # to see the grandparent of HEAD
+$ git show HEAD~4 # to see the great-great grandparent of HEAD
-------------------------------------
-to see the difference between the most-recently committed tree in
-the current branch and the most-recently committed tree in the
-experimental branch.
+Note that merge commits may have more than one parent:
+
+-------------------------------------
+$ git show HEAD^1 # show the first parent of HEAD (same as HEAD^)
+$ git show HEAD^2 # show the second parent of HEAD
+-------------------------------------
-But you may find it more useful to see the list of commits made in
-the experimental branch but not in the current branch, and
+You can also give commits names of your own; after running
-------------------------------------
-git whatchanged HEAD..experimental
+$ git-tag v2.5 1b2e1d63ff
-------------------------------------
-will do that, just as
+you can refer to 1b2e1d63ff by the name "v2.5". If you intend to
+share this name with other people (for example, to identify a release
+version), you should create a "tag" object, and perhaps sign it; see
+gitlink:git-tag[1] for details.
+
+Any git command that needs to know a commit can take any of these
+names. For example:
-------------------------------------
-git whatchanged experimental..HEAD
+$ git diff v2.5 HEAD # compare the current HEAD to v2.5
+$ git branch stable v2.5 # start a new branch named "stable" based
+ # at v2.5
+$ git reset --hard HEAD^ # reset your current branch and working
+ # directory to its state at HEAD^
-------------------------------------
-will show the list of commits made on the HEAD but not included in
-experimental.
+Be careful with that last command: in addition to losing any changes
+in the working directory, it will also remove all later commits from
+this branch. If this branch is the only branch containing those
+commits, they will be lost. (Also, don't use "git reset" on a
+publicly-visible branch that other developers pull from, as git will
+be confused by history that disappears in this way.)
-You can also give commits convenient names of your own: after running
+The git grep command can search for strings in any version of your
+project, so
-------------------------------------
-$ git-tag v2.5 HEAD^^
+$ git grep "hello" v2.5
-------------------------------------
-you can refer to HEAD^^ by the name "v2.5". If you intend to share
-this name with other people (for example, to identify a release
-version), you should create a "tag" object, and perhaps sign it; see
-gitlink:git-tag[1] for details.
+searches for all occurrences of "hello" in v2.5.
-You can revisit the old state of a tree, and make further
-modifications if you wish, using git branch: the command
+If you leave out the commit name, git grep will search any of the
+files it manages in your current directory. So
-------------------------------------
-$ git branch stable-release v2.5
+$ git grep "hello"
-------------------------------------
-will create a new branch named "stable-release" starting from the
-commit which you tagged with the name v2.5.
+is a quick way to search just the files that are tracked by git.
-You can reset the state of any branch to an earlier commit at any
-time with
+Many git commands also take sets of commits, which can be specified
+in a number of ways. Here are some examples with git log:
-------------------------------------
-$ git reset --hard v2.5
+$ git log v2.5..v2.6 # commits between v2.5 and v2.6
+$ git log v2.5.. # commits since v2.5
+$ git log --since="2 weeks ago" # commits from the last 2 weeks
+$ git log v2.5.. Makefile # commits since v2.5 which modify
+ # Makefile
-------------------------------------
-This will remove all later commits from this branch and reset the
-working tree to the state it had when the given commit was made. If
-this branch is the only branch containing the later commits, those
-later changes will be lost. Don't use "git reset" on a
-publicly-visible branch that other developers pull from, as git will
-be confused by history that disappears in this way.
+You can also give git log a "range" of commits where the first is not
+necessarily an ancestor of the second; for example, if the tips of
+the branches "stable-release" and "master" diverged from a common
+commit some time ago, then
+
+-------------------------------------
+$ git log stable..experimental
+-------------------------------------
+
+will list commits made in the experimental branch but not in the
+stable branch, while
+
+-------------------------------------
+$ git log experimental..stable
+-------------------------------------
+
+will show the list of commits made on the stable branch but not
+the experimental branch.
+
+The "git log" command has a weakness: it must present commits in a
+list. When the history has lines of development that diverged and
+then merged back together, the order in which "git log" presents
+those commits is meaningless.
+
+Most projects with multiple contributors (such as the linux kernel,
+or git itself) have frequent merges, and gitk does a better job of
+visualizing their history. For example,
+
+-------------------------------------
+$ gitk --since="2 weeks ago" drivers/
+-------------------------------------
+
+allows you to browse any commits from the last 2 weeks of commits
+that modified files under the "drivers" directory. (Note: you can
+adjust gitk's fonts by holding down the control key while pressing
+"-" or "+".)
+
+Finally, most commands that take filenames will optionally allow you
+to precede any filename by a commit, to specify a particular version
+of the file:
+
+-------------------------------------
+$ git diff v2.5:Makefile HEAD:Makefile.in
+-------------------------------------
+
+You can also use "git cat-file -p" to see any such file:
+
+-------------------------------------
+$ git cat-file -p v2.5:Makefile
+-------------------------------------
Next Steps
----------
-Some good commands to explore next:
+This tutorial should be enough to perform basic distributed revision
+control for your projects. However, to fully understand the depth
+and power of git you need to understand two simple ideas on which it
+is based:
+
+ * The object database is the rather elegant system used to
+ store the history of your project--files, directories, and
+ commits.
- * gitlink:git-diff[1]: This flexible command does much more than
- we've seen in the few examples above.
+ * The index file is a cache of the state of a directory tree,
+ used to create commits, check out working directories, and
+ hold the various trees involved in a merge.
+
+link:tutorial-2.html[Part two of this tutorial] explains the object
+database, the index file, and a few other odds and ends that you'll
+need to make the most of git.
+
+If you don't want to consider with that right away, a few other
+digressions that may be interesting at this point are:
* gitlink:git-format-patch[1], gitlink:git-am[1]: These convert
series of git commits into emailed patches, and vice versa,
smart enough to perform a close-to-optimal search even in the
case of complex non-linear history with lots of merged branches.
-Other good starting points include link:everyday.html[Everday GIT
-with 20 Commands Or So] and link:cvs-migration.html[git for CVS
-users]. Also, link:core-tutorial.html[A short git tutorial] gives an
-introduction to lower-level git commands for advanced users and
-developers.
+ * link:everyday.html[Everyday GIT with 20 Commands Or So]
+
+ * link:cvs-migration.html[git for CVS users].