NAME
----
-gitattributes - defining attributes per path
+gitattributes - Defining attributes per path
SYNOPSIS
--------
When more than one pattern matches the path, a later line
overrides an earlier line. This overriding is done per
-attribute. The rules how the pattern matches paths are the
-same as in `.gitignore` files; see linkgit:gitignore[5].
-Unlike `.gitignore`, negative patterns are forbidden.
+attribute.
+
+The rules by which the pattern matches paths are the same as in
+`.gitignore` files (see linkgit:gitignore[5]), with a few exceptions:
+
+ - negative patterns are forbidden
+
+ - patterns that match a directory do not recursively match paths
+ inside that directory (so using the trailing-slash `path/` syntax is
+ pointless in an attributes file; use `path/**` instead)
When deciding what attributes are assigned to a path, Git
consults `$GIT_DIR/info/attributes` file (which has the highest
-------------------------------------------------
$ echo "* text=auto" >.gitattributes
-$ git read-tree --empty # Clean index, force re-scan of working directory
-$ git add .
+$ git add --renormalize .
$ git status # Show files that will be normalized
$ git commit -m "Introduce end-of-line normalization"
-------------------------------------------------
catch potential problems early, safety triggers.
+`working-tree-encoding`
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Git recognizes files encoded in ASCII or one of its supersets (e.g.
+UTF-8, ISO-8859-1, ...) as text files. Files encoded in certain other
+encodings (e.g. UTF-16) are interpreted as binary and consequently
+built-in Git text processing tools (e.g. 'git diff') as well as most Git
+web front ends do not visualize the contents of these files by default.
+
+In these cases you can tell Git the encoding of a file in the working
+directory with the `working-tree-encoding` attribute. If a file with this
+attribute is added to Git, then Git reencodes the content from the
+specified encoding to UTF-8. Finally, Git stores the UTF-8 encoded
+content in its internal data structure (called "the index"). On checkout
+the content is reencoded back to the specified encoding.
+
+Please note that using the `working-tree-encoding` attribute may have a
+number of pitfalls:
+
+- Alternative Git implementations (e.g. JGit or libgit2) and older Git
+ versions (as of March 2018) do not support the `working-tree-encoding`
+ attribute. If you decide to use the `working-tree-encoding` attribute
+ in your repository, then it is strongly recommended to ensure that all
+ clients working with the repository support it.
+
+ For example, Microsoft Visual Studio resources files (`*.rc`) or
+ PowerShell script files (`*.ps1`) are sometimes encoded in UTF-16.
+ If you declare `*.ps1` as files as UTF-16 and you add `foo.ps1` with
+ a `working-tree-encoding` enabled Git client, then `foo.ps1` will be
+ stored as UTF-8 internally. A client without `working-tree-encoding`
+ support will checkout `foo.ps1` as UTF-8 encoded file. This will
+ typically cause trouble for the users of this file.
+
+ If a Git client, that does not support the `working-tree-encoding`
+ attribute, adds a new file `bar.ps1`, then `bar.ps1` will be
+ stored "as-is" internally (in this example probably as UTF-16).
+ A client with `working-tree-encoding` support will interpret the
+ internal contents as UTF-8 and try to convert it to UTF-16 on checkout.
+ That operation will fail and cause an error.
+
+- Reencoding content to non-UTF encodings can cause errors as the
+ conversion might not be UTF-8 round trip safe. If you suspect your
+ encoding to not be round trip safe, then add it to
+ `core.checkRoundtripEncoding` to make Git check the round trip
+ encoding (see linkgit:git-config[1]). SHIFT-JIS (Japanese character
+ set) is known to have round trip issues with UTF-8 and is checked by
+ default.
+
+- Reencoding content requires resources that might slow down certain
+ Git operations (e.g 'git checkout' or 'git add').
+
+Use the `working-tree-encoding` attribute only if you cannot store a file
+in UTF-8 encoding and if you want Git to be able to process the content
+as text.
+
+As an example, use the following attributes if your '*.ps1' files are
+UTF-16 encoded with byte order mark (BOM) and you want Git to perform
+automatic line ending conversion based on your platform.
+
+------------------------
+*.ps1 text working-tree-encoding=UTF-16
+------------------------
+
+Use the following attributes if your '*.ps1' files are UTF-16 little
+endian encoded without BOM and you want Git to use Windows line endings
+in the working directory. Please note, it is highly recommended to
+explicitly define the line endings with `eol` if the `working-tree-encoding`
+attribute is used to avoid ambiguity.
+
+------------------------
+*.ps1 text working-tree-encoding=UTF-16LE eol=CRLF
+------------------------
+
+You can get a list of all available encodings on your platform with the
+following command:
+
+------------------------
+iconv --list
+------------------------
+
+If you do not know the encoding of a file, then you can use the `file`
+command to guess the encoding:
+
+------------------------
+file foo.ps1
+------------------------
+
+
`ident`
^^^^^^^
into a usable content by setting the filter.<driver>.required configuration
variable to `true`.
+Note: Whenever the clean filter is changed, the repo should be renormalized:
+$ git add --renormalize .
+
For example, in .gitattributes, you would assign the `filter`
attribute for paths.
If the filter command (a string value) is defined via
`filter.<driver>.process` then Git can process all blobs with a
single filter invocation for the entire life of a single Git
-command. This is achieved by using a packet format (pkt-line,
-see technical/protocol-common.txt) based protocol over standard
-input and standard output as follows. All packets, except for the
-"*CONTENT" packets and the "0000" flush packet, are considered
-text and therefore are terminated by a LF.
-
-Git starts the filter when it encounters the first file
-that needs to be cleaned or smudged. After the filter started
-Git sends a welcome message ("git-filter-client"), a list of supported
-protocol version numbers, and a flush packet. Git expects to read a welcome
-response message ("git-filter-server"), exactly one protocol version number
-from the previously sent list, and a flush packet. All further
-communication will be based on the selected version. The remaining
-protocol description below documents "version=2". Please note that
-"version=42" in the example below does not exist and is only there
-to illustrate how the protocol would look like with more than one
-version.
-
-After the version negotiation Git sends a list of all capabilities that
-it supports and a flush packet. Git expects to read a list of desired
-capabilities, which must be a subset of the supported capabilities list,
-and a flush packet as response:
-------------------------
-packet: git> git-filter-client
-packet: git> version=2
-packet: git> version=42
-packet: git> 0000
-packet: git< git-filter-server
-packet: git< version=2
-packet: git< 0000
-packet: git> capability=clean
-packet: git> capability=smudge
-packet: git> capability=not-yet-invented
-packet: git> 0000
-packet: git< capability=clean
-packet: git< capability=smudge
-packet: git< 0000
-------------------------
-Supported filter capabilities in version 2 are "clean", "smudge",
-and "delay".
+command. This is achieved by using the long-running process protocol
+(described in technical/long-running-process-protocol.txt).
+
+When Git encounters the first file that needs to be cleaned or smudged,
+it starts the filter and performs the handshake. In the handshake, the
+welcome message sent by Git is "git-filter-client", only version 2 is
+suppported, and the supported capabilities are "clean", "smudge", and
+"delay".
Afterwards Git sends a list of "key=value" pairs terminated with
a flush packet. The list will contain at least the filter command
with the next file that needs to be processed. Depending on the
`filter.<driver>.required` flag Git will interpret that as error.
-After the filter has processed a command it is expected to wait for
-a "key=value" list containing the next command. Git will close
-the command pipe on exit. The filter is expected to detect EOF
-and exit gracefully on its own. Git will wait until the filter
-process has stopped.
-
Delay
^^^^^
- `fountain` suitable for Fountain documents.
+- `golang` suitable for source code in the Go language.
+
- `html` suitable for HTML/XHTML documents.
- `java` suitable for source code in the Java language.
------------
-EXAMPLE
--------
+EXAMPLES
+--------
If you have these three `gitattributes` file: