Directions on how to stage/unstage/add shown in the
output of linkgit:git-status[1] and the template shown
when writing commit messages. Default: true.
+ commitBeforeMerge::
+ Advice shown when linkgit:git-merge[1] refuses to
+ merge to avoid overwritting local changes.
+ Default: true.
--
core.fileMode::
If false, the executable bit differences between the index and
the working copy are ignored; useful on broken filesystems like FAT.
- See linkgit:git-update-index[1]. True by default.
+ See linkgit:git-update-index[1].
++
+The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
+will probe and set core.fileMode false if appropriate when the
+repository is created.
core.ignoreCygwinFSTricks::
This option is only used by Cygwin implementation of Git. If false,
is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's
POSIX emulation is required to support core.filemode.
+core.ignorecase::
+ If true, this option enables various workarounds to enable
+ git to work better on filesystems that are not case sensitive,
+ like FAT. For example, if a directory listing finds
+ "makefile" when git expects "Makefile", git will assume
+ it is really the same file, and continue to remember it as
+ "Makefile".
++
+The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
+will probe and set core.ignorecase true if appropriate when the repository
+is created.
+
core.trustctime::
If false, the ctime differences between the index and the
working copy are ignored; useful when the inode change time
writing to the filesystem. The variable can be set to
'input', in which case the conversion happens only while
reading from the filesystem but files are written out with
- `LF` at the end of lines. Currently, which paths to consider
- "text" (i.e. be subjected to the autocrlf mechanism) is
- decided purely based on the contents.
+ `LF` at the end of lines. A file is considered
+ "text" (i.e. be subjected to the autocrlf mechanism) based on
+ the file's `crlf` attribute, or if `crlf` is unspecified,
+ based on the file's contents. See linkgit:gitattributes[5].
core.safecrlf::
If true, makes git check if converting `CRLF` as controlled by
contain the link text. linkgit:git-update-index[1] and
linkgit:git-add[1] will not change the recorded type to regular
file. Useful on filesystems like FAT that do not support
- symbolic links. True by default.
+ symbolic links.
++
+The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
+will probe and set core.symlinks false if appropriate when the repository
+is created.
core.gitProxy::
A "proxy command" to execute (as 'command host port') instead
= true).
core.worktree::
- Set the path to the working tree. The value will not be
- used in combination with repositories found automatically in
- a .git directory (i.e. $GIT_DIR is not set).
+ Set the path to the root of the work tree.
This can be overridden by the GIT_WORK_TREE environment
variable and the '--work-tree' command line option. It can be
- a absolute path or relative path to the directory specified by
- --git-dir or GIT_DIR.
- Note: If --git-dir or GIT_DIR are specified but none of
+ an absolute path or a relative path to the .git directory,
+ either specified by --git-dir or GIT_DIR, or automatically
+ discovered.
+ If --git-dir or GIT_DIR are specified but none of
--work-tree, GIT_WORK_TREE and core.worktree is specified,
- the current working directory is regarded as the top directory
- of your working tree.
+ the current working directory is regarded as the root of the
+ work tree.
++
+Note that this variable is honored even when set in a configuration
+file in a ".git" subdirectory of a directory, and its value differs
+from the latter directory (e.g. "/path/to/.git/config" has
+core.worktree set to "/different/path"), which is most likely a
+misconfiguration. Running git commands in "/path/to" directory will
+still use "/different/path" as the root of the work tree and can cause
+great confusion to the users.
core.logAllRefUpdates::
Enable the reflog. Updates to a ref <ref> is logged to the file
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
+core.bigFileThreshold::
+ Files larger than this size are stored deflated, without
+ attempting delta compression. Storing large files without
+ delta compression avoids excessive memory usage, at the
+ slight expense of increased disk usage.
++
+Default is 512 MiB on all platforms. This should be reasonable
+for most projects as source code and other text files can still
+be delta compressed, but larger binary media files won't be.
++
+Common unit suffixes of 'k', 'm', or 'g' are supported.
++
+Currently only linkgit:git-fast-import[1] honors this setting.
+
core.excludesfile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', git looks into this file for patterns
- of files which are not meant to be tracked. See
- linkgit:gitignore[5].
+ of files which are not meant to be tracked. "{tilde}/" is expanded
+ to the value of `$HOME` and "{tilde}user/" to the specified user's
+ home directory. See linkgit:gitignore[5].
core.editor::
Commands such as `commit` and `tag` that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
- `GIT_EDITOR` is not set. The order of preference is
- `GIT_EDITOR` environment, `core.editor`, `VISUAL` and
- `EDITOR` environment variables and then finally `vi`.
+ `GIT_EDITOR` is not set. See linkgit:git-var[1].
core.pager::
The command that git will use to paginate output. Can
Set this config setting to 'rename' there; However, This will remove the
check that makes sure that existing object files will not get overwritten.
+core.notesRef::
+ When showing commit messages, also show notes which are stored in
+ the given ref. This ref is expected to contain files named
+ after the full SHA-1 of the commit they annotate.
++
+If such a file exists in the given ref, the referenced blob is read, and
+appended to the commit message, separated by a "Notes:" line. If the
+given ref itself does not exist, it is not an error, but means that no
+notes should be printed.
++
+This setting defaults to "refs/notes/commits", and can be overridden by
+the `GIT_NOTES_REF` environment variable.
+
add.ignore-errors::
Tells 'git-add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
as the '--whitespace' option. See linkgit:git-apply[1].
branch.autosetupmerge::
- Tells 'git-branch' and 'git-checkout' to setup new branches
+ Tells 'git-branch' and 'git-checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
starting point branch. Note that even if this option is not set,
this behavior can be chosen per-branch using the `--track`
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
of `plain` (context text), `meta` (metainformation), `frag`
- (hunk header), `old` (removed lines), `new` (added lines),
- `commit` (commit headers), or `whitespace` (highlighting
- whitespace errors). The values of these variables may be specified as
- in color.branch.<slot>.
+ (hunk header), 'func' (function in hunk header), `old` (removed lines),
+ `new` (added lines), `commit` (commit headers), or `whitespace`
+ (highlighting whitespace errors). The values of these variables may be
+ specified as in color.branch.<slot>.
color.grep::
When set to `always`, always highlight matches. When `false` (or
commit.template::
Specify a file to use as the template for new commit messages.
+ "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
+ specified user's home directory.
diff.autorefreshindex::
When using 'git-diff' to compare with work tree
contents in the work tree match the contents in the
index. This option defaults to true. Note that this
affects only 'git-diff' Porcelain, and not lower level
- 'diff' commands, such as 'git-diff-files'.
+ 'diff' commands such as 'git-diff-files'.
diff.external::
If this config variable is set, diff generation is not
format.thread::
The default threading style for 'git-format-patch'. Can be
- either a boolean value, `shallow` or `deep`. `shallow`
- threading makes every mail a reply to the head of the series,
+ a boolean value, or `shallow` or `deep`. `shallow` threading
+ makes every mail a reply to the head of the series,
where the head is chosen from the cover letter, the
`\--in-reply-to`, and the first patch mail, in this order.
`deep` threading makes every mail a reply to the previous one.
default value is 50. Setting this to 0 disables it.
gc.packrefs::
- 'git-gc' does not run `git pack-refs` in a bare repository by
- default so that older dumb-transport clients can still fetch
- from the repository. Setting this to `true` lets 'git-gc'
- to run `git pack-refs`. Setting this to `false` tells
- 'git-gc' never to run `git pack-refs`. The default setting is
- `notbare`. Enable it only when you know you do not have to
- support such clients. The default setting will change to `true`
- at some stage, and setting this to `false` will continue to
- prevent `git pack-refs` from being run from 'git-gc'.
+ Running `git pack-refs` in a repository renders it
+ unclonable by Git versions prior to 1.5.1.2 over dumb
+ transports such as HTTP. This variable determines whether
+ 'git gc' runs `git pack-refs`. This can be set to "nobare"
+ to enable it within all non-bare repos or it can be set to a
+ boolean value. The default is `true`.
gc.pruneexpire::
When 'git-gc' is run, it will call 'prune --expire 2.weeks.ago'.
How many HTTP requests to launch in parallel. Can be overridden
by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
+http.postBuffer::
+ Maximum size in bytes of the buffer used by smart HTTP
+ transports when POSTing data to the remote system.
+ For requests larger than this buffer size, HTTP/1.1 and
+ Transfer-Encoding: chunked is used to avoid creating a
+ massive pack file locally. Default is 1 MiB, which is
+ sufficient for most requests.
+
http.lowSpeedLimit, http.lowSpeedTime::
If the HTTP transfer speed is less than 'http.lowSpeedLimit'
for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
remote.<name>.skipDefaultUpdate::
If true, this remote will be skipped by default when updating
- using the update subcommand of linkgit:git-remote[1].
+ using linkgit:git-fetch[1] or the `update` subcommand of
+ linkgit:git-remote[1].
+
+remote.<name>.skipFetchAll::
+ If true, this remote will be skipped by default when updating
+ using linkgit:git-fetch[1] or the `update` subcommand of
+ linkgit:git-remote[1].
remote.<name>.receivepack::
The default program to execute on the remote side when pushing. See