--annotate::
Review and edit each patch you're about to send. Default is the value
of 'sendemail.annotate'. See the CONFIGURATION section for
- 'sendemail.multiedit'.
+ 'sendemail.multiEdit'.
---bcc=<address>::
+--bcc=<address>,...::
Specify a "Bcc:" value for each email. Default is the value of
'sendemail.bcc'.
+
-The --bcc option must be repeated for each user you want on the bcc list.
+This option may be specified multiple times.
---cc=<address>::
+--cc=<address>,...::
Specify a starting "Cc:" value for each email.
Default is the value of 'sendemail.cc'.
+
-The --cc option must be repeated for each user you want on the cc list.
+This option may be specified multiple times.
--compose::
Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1])
+
Missing From or In-Reply-To headers will be prompted for.
+
-See the CONFIGURATION section for 'sendemail.multiedit'.
+See the CONFIGURATION section for 'sendemail.multiEdit'.
--from=<address>::
Specify the sender of the emails. If not specified on the command line,
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
---to=<address>::
+--to=<address>,...::
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
value of the 'sendemail.to' configuration value; if that is unspecified,
and --to-cmd is not specified, this will be prompted for.
+
-The --to option must be repeated for each user you want on the to list.
+This option may be specified multiple times.
--8bit-encoding=<encoding>::
When encountering a non-ASCII message or subject that does not
subscribed to a list. In order to use the 'From' address, set the
value to "auto". If you use the sendmail binary, you must have
suitable privileges for the -f parameter. Default is the value of the
- 'sendemail.envelopesender' configuration variable; if that is
+ 'sendemail.envelopeSender' configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
--smtp-encryption=<encryption>::
Specify the encryption to use, either 'ssl' or 'tls'. Any other
value reverts to plain SMTP. Default is the value of
- 'sendemail.smtpencryption'.
+ 'sendemail.smtpEncryption'.
--smtp-domain=<FQDN>::
Specifies the Fully Qualified Domain Name (FQDN) used in the
HELO/EHLO command to the SMTP server. Some servers require the
FQDN to match your IP address. If not set, git send-email attempts
to determine your FQDN automatically. Default is the value of
- 'sendemail.smtpdomain'.
+ 'sendemail.smtpDomain'.
+
+--smtp-auth=<mechanisms>::
+ Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting
+ forces using only the listed mechanisms. Example:
++
+------
+$ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ...
+------
++
+If at least one of the specified mechanisms matches the ones advertised by the
+SMTP server and if it is supported by the utilized SASL library, the mechanism
+is used for authentication. If neither 'sendemail.smtpAuth' nor '--smtp-auth'
+is specified, all mechanisms supported by the SASL library can be used.
--smtp-pass[=<password>]::
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
- the password. Default is the value of 'sendemail.smtppass',
+ the password. Default is the value of 'sendemail.smtpPass',
however '--smtp-pass' always overrides this value.
+
Furthermore, passwords need not be specified in configuration files
or on the command line. If a username has been specified (with
-'--smtp-user' or a 'sendemail.smtpuser'), but no password has been
-specified (with '--smtp-pass' or 'sendemail.smtppass'), then
+'--smtp-user' or a 'sendemail.smtpUser'), but no password has been
+specified (with '--smtp-pass' or 'sendemail.smtpPass'), then
a password is obtained using 'git-credential'.
--smtp-server=<host>::
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
the program must support the `-i` option. Default value can
- be specified by the 'sendemail.smtpserver' configuration
+ be specified by the 'sendemail.smtpServer' configuration
option; the built-in default is `/usr/sbin/sendmail` or
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
submission port 587, or the common SSL smtp port 465);
symbolic port names (e.g. "submission" instead of 587)
are also accepted. The port can also be set with the
- 'sendemail.smtpserverport' configuration variable.
+ 'sendemail.smtpServerPort' configuration variable.
--smtp-server-option=<option>::
If set, specifies the outgoing SMTP server option to use.
- Default value can be specified by the 'sendemail.smtpserveroption'
+ Default value can be specified by the 'sendemail.smtpServerOption'
configuration option.
+
The --smtp-server-option option must be repeated for each option you want
be the best choice on most platforms).
--smtp-user=<user>::
- Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
- if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
+ Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser';
+ if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'),
then authentication is not attempted.
--smtp-debug=0|1::
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
- Default is the value of 'sendemail.cccmd' configuration value.
+ Default is the value of 'sendemail.ccCmd' configuration value.
--[no-]chain-reply-to::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
this, it is recommended that the first file given be an overview of the
- entire patch series. Disabled by default, but the 'sendemail.chainreplyto'
+ entire patch series. Disabled by default, but the 'sendemail.chainReplyTo'
configuration variable can be used to enable it.
--identity=<identity>::
--[no-]suppress-from::
If this is set, do not add the From: address to the cc: list.
- Default is the value of 'sendemail.suppressfrom' configuration
+ Default is the value of 'sendemail.suppressFrom' configuration
value; if that is unspecified, default to --no-suppress-from.
--[no-]thread::
CONFIGURATION
-------------
-sendemail.aliasesfile::
+sendemail.aliasesFile::
To avoid typing long email addresses, point this to one or more
- email aliases files. You must also supply 'sendemail.aliasfiletype'.
+ email aliases files. You must also supply 'sendemail.aliasFileType'.
-sendemail.aliasfiletype::
- Format of the file(s) specified in sendemail.aliasesfile. Must be
- one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'.
+sendemail.aliasFileType::
+ Format of the file(s) specified in sendemail.aliasesFile. Must be
+ one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus', or 'sendmail'.
++
+What an alias file in each format looks like can be found in
+the documentation of the email program of the same name. The
+differences and limitations from the standard formats are
+described below:
++
+--
+sendmail;;
+* Quoted aliases and quoted addresses are not supported: lines that
+ contain a `"` symbol are ignored.
+* Redirection to a file (`/path/name`) or pipe (`|command`) is not
+ supported.
+* File inclusion (`:include: /path/name`) is not supported.
+* Warnings are printed on the standard error output for any
+ explicitly unsupported constructs, and any other lines that are not
+ recognized by the parser.
+--
-sendemail.multiedit::
+sendemail.multiEdit::
If true (default), a single editor instance will be spawned to edit
files you have to edit (patches when '--annotate' is used, and the
summary when '--compose' is used). If false, files will be edited one
edit ~/.gitconfig to specify your account settings:
[sendemail]
- smtpencryption = tls
- smtpserver = smtp.gmail.com
- smtpuser = yourname@gmail.com
- smtpserverport = 587
+ smtpEncryption = tls
+ smtpServer = smtp.gmail.com
+ smtpUser = yourname@gmail.com
+ smtpServerPort = 587
Once your commits are ready to be sent to the mailing list, run the
following commands: