-Git User's Manual (for version 1.5.3 or newer)
-______________________________________________
-
+Git User Manual
+_______________
Git is a fast distributed revision control system.
The initial clone may be time-consuming for a large project, but you
will only need to clone once.
-The clone command creates a new directory named after the project (`git`
-or `linux-2.6` in the examples above). After you cd into this
+The clone command creates a new directory named after the project
+(`git` or `linux` in the examples above). After you cd into this
directory, you will see that it contains a copy of the project files,
called the <<def_working_tree,working tree>>, together with a special
top-level directory named `.git`, which contains all the information
The best way to see how this works is using the linkgit:gitk[1]
command; running gitk now on a Git repository and looking for merge
-commits will help understand how the Git organizes history.
+commits will help understand how Git organizes history.
In the following, we say that commit X is "reachable" from commit Y
if commit X is an ancestor of commit Y. Equivalently, you could say
------------------------------------------------
$ git checkout v2.6.17
-Note: moving to "v2.6.17" which isn't a local branch
-If you want to create a new branch from this checkout, you may do so
-(now or later) by using -b with the checkout command again. Example:
- git checkout -b <new_branch_name>
+Note: checking out 'v2.6.17'.
+
+You are in 'detached HEAD' state. You can look around, make experimental
+changes and commit them, and you can discard any commits you make in this
+state without impacting any branches by performing another checkout.
+
+If you want to create a new branch to retain commits you create, you may
+do so (now or later) by using -b with the checkout command again. Example:
+
+ git checkout -b new_branch_name
+
HEAD is now at 427abfa... Linux v2.6.17
------------------------------------------------
$ cat .git/HEAD
427abfa28afedffadfca9dd8b067eb6d36bac53f
$ git branch
-* (no branch)
+* (detached from v2.6.17)
master
------------------------------------------------
cloned from, using linkgit:git-remote[1]:
-------------------------------------------------
-$ git remote add linux-nfs git://linux-nfs.org/pub/nfs-2.6.git
-$ git fetch linux-nfs
-* refs/remotes/linux-nfs/master: storing branch 'master' ...
- commit: bf81b46
+$ git remote add staging git://git.kernel.org/.../gregkh/staging.git
+$ git fetch staging
+...
+From git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
+ * [new branch] master -> staging/master
+ * [new branch] staging-linus -> staging/staging-linus
+ * [new branch] staging-next -> staging/staging-next
-------------------------------------------------
New remote-tracking branches will be stored under the shorthand name
-that you gave `git remote add`, in this case `linux-nfs`:
+that you gave `git remote add`, in this case `staging`:
-------------------------------------------------
$ git branch -r
-linux-nfs/master
-origin/master
+ origin/HEAD -> origin/master
+ origin/master
+ staging/master
+ staging/staging-linus
+ staging/staging-next
-------------------------------------------------
If you run `git fetch <remote>` later, the remote-tracking branches
-------------------------------------------------
$ cat .git/config
...
-[remote "linux-nfs"]
- url = git://linux-nfs.org/pub/nfs-2.6.git
- fetch = +refs/heads/*:refs/remotes/linux-nfs/*
+[remote "staging"]
+ url = git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
+ fetch = +refs/heads/*:refs/remotes/staging/*
...
-------------------------------------------------
-------------------------------------------------
Or you could recall that the `...` operator selects all commits
-contained reachable from either one reference or the other but not
+reachable from either one reference or the other but not
both; so
-------------------------------------------------
$ gitk e05db0fd..
-------------------------------------------------
-Or you can use linkgit:git-name-rev[1], which will give the commit a
+or you can use linkgit:git-name-rev[1], which will give the commit a
name based on any tag it finds pointing to one of the commit's
descendants:
As yet another alternative, the linkgit:git-show-branch[1] command lists
the commits reachable from its arguments with a display on the left-hand
-side that indicates which arguments that commit is reachable from. So,
-you can run something like
+side that indicates which arguments that commit is reachable from.
+So, if you run something like
-------------------------------------------------
$ git show-branch e05db0fd v1.5.0-rc0 v1.5.0-rc1 v1.5.0-rc2
...
-------------------------------------------------
-then search for a line that looks like
+then a line like
-------------------------------------------------
+ ++ [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if
available
-------------------------------------------------
-Which shows that e05db0fd is reachable from itself, from v1.5.0-rc1, and
-from v1.5.0-rc2, but not from v1.5.0-rc0.
+shows that e05db0fd is reachable from itself, from v1.5.0-rc1,
+and from v1.5.0-rc2, and not from v1.5.0-rc0.
[[showing-commits-unique-to-a-branch]]
Showing commits unique to a given branch
$ git merge branch
-------------------------------------------------
-are roughly equivalent. The former is actually very commonly used.
+are roughly equivalent.
[[submitting-patches]]
Submitting patches to a project
resolution, instead of creating a new commit, just run
-------------------------------------------------
-$ git am --resolved
+$ git am --continue
-------------------------------------------------
and Git will create the commit for you and continue applying the
tree:
-------------------------------------------------
-$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git work
+$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git work
$ cd work
-------------------------------------------------
-------------------------------------------------
$ cat >> .git/config <<EOF
[remote "mytree"]
- url = master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+ url = master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux.git
push = release
push = test
EOF
$ ... patch ... test ... commit [ ... patch ... test ... commit ]*
-------------------------------------------------
-When you are happy with the state of this change, you can pull it into the
+When you are happy with the state of this change, you can merge it into the
"test" branch in preparation to make it public:
-------------------------------------------------
-$ git checkout test && git pull . speed-up-spinlocks
+$ git checkout test && git merge speed-up-spinlocks
-------------------------------------------------
It is unlikely that you would have any conflicts here ... but you might if you
means that the patches can be moved into the `release` tree in any order.
-------------------------------------------------
-$ git checkout release && git pull . speed-up-spinlocks
+$ git checkout release && git merge speed-up-spinlocks
-------------------------------------------------
After a while, you will have a number of branches, and despite the
------------------------------------------------
$ git repack
-Generating pack...
-Done counting 6020 objects.
-Deltifying 6020 objects.
- 100% (6020/6020) done
-Writing 6020 objects.
- 100% (6020/6020) done
-Total 6020, written 6020 (delta 4070), reused 0 (delta 0)
-Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created.
+Counting objects: 6020, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (6020/6020), done.
+Writing objects: 100% (6020/6020), done.
+Total 6020 (delta 4070), reused 0 (delta 0)
------------------------------------------------
-You can then run
+This creates a single "pack file" in .git/objects/pack/
+containing all currently unpacked objects. You can then run
------------------------------------------------
$ git prune
manually check them out; earlier versions won't recognize the submodules at
all.
-To see how submodule support works, create (for example) four example
+To see how submodule support works, create four example
repositories that can be used later as a submodule:
-------------------------------------------------
-------------------------------------------------
$ git branch
-* (no branch)
+* (detached from d266b98)
master
-------------------------------------------------
previous states represented by other commits.
In other words, while a "tree" represents a particular directory state
-of a working directory, a "commit" represents that state in "time",
+of a working directory, a "commit" represents that state in time,
and explains how we got there.
You create a commit object by giving it the tree that describes the
Nowadays, `git log` is a builtin, which means that it is _contained_ in the
command `git`. The source side of a builtin is
-- a function called `cmd_<bla>`, typically defined in `builtin-<bla>.c`,
- and declared in `builtin.h`,
+- a function called `cmd_<bla>`, typically defined in `builtin/<bla.c>`
+ (note that older versions of Git used to have it in `builtin-<bla>.c`
+ instead), and declared in `builtin.h`.
- an entry in the `commands[]` array in `git.c`, and
- an entry in `BUILTIN_OBJECTS` in the `Makefile`.
Sometimes, more than one builtin is contained in one source file. For
-example, `cmd_whatchanged()` and `cmd_log()` both reside in `builtin-log.c`,
+example, `cmd_whatchanged()` and `cmd_log()` both reside in `builtin/log.c`,
since they share quite a bit of code. In that case, the commands which are
_not_ named like the `.c` file in which they live have to be listed in
`BUILT_INS` in the `Makefile`.
- is plumbing, and
- was around even in the initial commit (it literally went only through
- some 20 revisions as `cat-file.c`, was renamed to `builtin-cat-file.c`
+ some 20 revisions as `cat-file.c`, was renamed to `builtin/cat-file.c`
when made a builtin, and then saw less than 10 versions).
-So, look into `builtin-cat-file.c`, search for `cmd_cat_file()` and look what
+So, look into `builtin/cat-file.c`, search for `cmd_cat_file()` and look what
it does.
------------------------------------------------------------------
builtin:
-------------------------------------------------
-$ git log --no-merges --diff-filter=A builtin-*.c
+$ git log --no-merges --diff-filter=A builtin/*.c
-------------------------------------------------
You see, Git is actually the best tool to find out about the source of Git
Alternates, clone -reference, etc.
More on recovery from repository corruption. See:
- http://marc.theaimsgroup.com/?l=git&m=117263864820799&w=2
- http://marc.theaimsgroup.com/?l=git&m=117147855503798&w=2
+ http://marc.info/?l=git&m=117263864820799&w=2
+ http://marc.info/?l=git&m=117147855503798&w=2