when writing commit messages. Default: true.
commitBeforeMerge::
Advice shown when linkgit:git-merge[1] refuses to
- merge to avoid overwritting local changes.
+ merge to avoid overwriting local changes.
Default: true.
resolveConflict::
Advices shown by various commands when conflicts
quoted without `-z` regardless of the setting of this
variable.
-core.autocrlf::
- If true, makes git convert `CRLF` at the end of lines in text files to
- `LF` when reading from the work tree, and convert in reverse when
- writing to the work tree. The variable can be set to
- 'input', in which case the conversion happens only while
- reading from the work tree but files are written out to the work
- tree with `LF` at the end of lines. A file is considered
- "text" (i.e. be subjected to the autocrlf mechanism) based on
- the file's `crlf` attribute, or if `crlf` is unspecified,
- based on the file's contents. See linkgit:gitattributes[5].
+core.eol::
+ Sets the line ending type to use in the working directory for
+ files that have the `text` property set. Alternatives are
+ 'lf', 'crlf' and 'native', which uses the platform's native
+ line ending. The default value is `native`. See
+ linkgit:gitattributes[5] for more information on end-of-line
+ conversion.
core.safecrlf::
- If true, makes git check if converting `CRLF` as controlled by
- `core.autocrlf` is reversible. Git will verify if a command
+ If true, makes git check if converting `CRLF` is reversible when
+ end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly.
For example, committing a file followed by checking out the
same file should yield the original file in the work tree. If
irreversible conversion but continue the operation.
+
CRLF conversion bears a slight chance of corrupting data.
-autocrlf=true will convert CRLF to LF during commit and LF to
+When it is enabled, git will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
+
Note, this safety check does not mean that a checkout will generate a
file identical to the original file for a different setting of
-`core.autocrlf`, but only for the current one. For example, a text
-file with `LF` would be accepted with `core.autocrlf=input` and could
-later be checked out with `core.autocrlf=true`, in which case the
+`core.eol` and `core.autocrlf`, but only for the current one. For
+example, a text file with `LF` would be accepted with `core.eol=lf`
+and could later be checked out with `core.eol=crlf`, in which case the
resulting file would contain `CRLF`, although the original file
contained `LF`. However, in both work trees the line endings would be
consistent, that is either all `LF` or all `CRLF`, but never mixed. A
file with mixed line endings would be reported by the `core.safecrlf`
mechanism.
+core.autocrlf::
+ Setting this variable to "true" is almost the same as setting
+ the `text` attribute to "auto" on all files except that text
+ files are not guaranteed to be normalized: files that contain
+ `CRLF` in the repository will not be touched. Use this
+ setting if you want to have `CRLF` line endings in your
+ working directory even though the repository does not have
+ normalized line endings. This variable can be set to 'input',
+ in which case no output conversion is performed.
+
core.symlinks::
If false, symbolic links are checked out as small plain files that
contain the link text. linkgit:git-update-index[1] and
core.deltaBaseCacheLimit::
Maximum number of bytes to reserve for caching base objects
- that multiple deltafied objects reference. By storing the
+ that may be referenced by multiple deltified objects. By storing the
entire decompressed base objects in a cache Git is able
to avoid unpacking and decompressing frequently used base
objects multiple times.
error (enabled by default).
* `indent-with-non-tab` treats a line that is indented with 8 or more
space characters as an error (not enabled by default).
+* `tab-in-indent` treats a tab character in the initial indent part of
+ the line as an error (not enabled by default).
* `blank-at-eof` treats blank lines added at the end of file as an error
(enabled by default).
* `trailing-space` is a short-hand to cover both `blank-at-eol` and
am.keepcr::
If true, git-am will call git-mailsplit for patches in mbox format
with parameter '--keep-cr'. In this case git-mailsplit will
- not remove `\r` from lines ending with `\r\n`. Can be overrriden
+ not remove `\r` from lines ending with `\r\n`. Can be overridden
by giving '--no-keep-cr' from the command line.
See linkgit:git-am[1], linkgit:git-mailsplit[1].
(highlighting whitespace errors). The values of these variables may be
specified as in color.branch.<slot>.
+color.decorate.<slot>::
+ Use customized color for 'git log --decorate' output. `<slot>` is one
+ of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
+ branches, remote tracking branches, tags, stash and HEAD, respectively.
+
color.grep::
When set to `always`, always highlight matches. When `false` (or
`never`), never. When set to `true` or `auto`, use color only
standard "a/" and "b/" depending on what is being compared. When
this configuration is in effect, reverse diff output also swaps
the order of the prefixes:
+diff.noprefix::
+ If set, 'git diff' does not show any source or destination prefix.
`git diff`;;
compares the (i)ndex and the (w)ork tree;
`git diff HEAD`;;
will enable basic rename detection. If set to "copies" or
"copy", it will detect copies, as well.
+diff.ignoreSubmodules::
+ Sets the default value of --ignore-submodules. Note that this
+ affects only 'git diff' Porcelain, and not lower level 'diff'
+ commands such as 'git diff-files'.
+
diff.suppressBlankEmpty::
A boolean to inhibit the standard behavior of printing a space
before each empty output line. Defaults to false.
Additional email headers to include in a patch to be submitted
by mail. See linkgit:git-format-patch[1].
+format.to::
format.cc::
- Additional "Cc:" headers to include in a patch to be submitted
- by mail. See the --cc option in linkgit:git-format-patch[1].
+ Additional recipients to include in a patch to be submitted
+ by mail. See the --to and --cc options in
+ linkgit:git-format-patch[1].
format.subjectprefix::
The default for format-patch is to output files with the '[PATCH]'
subject prefix. Use this variable to change that prefix.
+format.signature::
+ The default for format-patch is to output a signature containing
+ the git version number. Use this variable to change that default.
+ Set this variable to the empty string ("") to suppress
+ signature generation.
+
format.suffix::
The default for format-patch is to output files with the suffix
`.patch`. Use this variable to change that suffix (make sure to
unreachable objects immediately.
gc.reflogexpire::
+gc.<pattern>.reflogexpire::
'git reflog expire' removes reflog entries older than
- this time; defaults to 90 days.
+ this time; defaults to 90 days. With "<pattern>" (e.g.
+ "refs/stash") in the middle the setting applies only to
+ the refs that match the <pattern>.
gc.reflogexpireunreachable::
+gc.<ref>.reflogexpireunreachable::
'git reflog expire' removes reflog entries older than
this time and are not reachable from the current tip;
- defaults to 30 days.
+ defaults to 30 days. With "<pattern>" (e.g. "refs/stash")
+ in the middle, the setting applies only to the refs that
+ match the <pattern>.
gc.rerereresolved::
Records of conflicted merge you resolved earlier are
various stuff. See linkgit:git-cvsserver[1].
gitcvs.usecrlfattr::
- If true, the server will look up the `crlf` attribute for
- files to determine the '-k' modes to use. If `crlf` is set,
- the '-k' mode will be left blank, so cvs clients will
- treat it as text. If `crlf` is explicitly unset, the file
+ If true, the server will look up the end-of-line conversion
+ attributes for files to determine the '-k' modes to use. If
+ the attributes force git to treat a file as text,
+ the '-k' mode will be left blank so CVS clients will
+ treat it as text. If they suppress text conversion, the file
will be set with '-kb' mode, which suppresses any newline munging
- the client might otherwise do. If `crlf` is not specified,
- then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5].
+ the client might otherwise do. If the attributes do not allow
+ the file type to be determined, then 'gitcvs.allbinary' is
+ used. See linkgit:gitattributes[5].
gitcvs.allbinary::
This is used if 'gitcvs.usecrlfattr' does not resolve
be bound to the local IP (127.0.0.1).
instaweb.modulepath::
- The module path for an apache httpd used by linkgit:git-instaweb[1].
+ The default module path for linkgit:git-instaweb[1] to use
+ instead of /usr/lib/apache2/modules. Only used if httpd
+ is Apache.
instaweb.port::
The port number to bind the gitweb httpd to. See
following alternatives: {relative,local,default,iso,rfc,short}.
See linkgit:git-log[1].
+log.decorate::
+ Print out the ref names of any commits that are shown by the log
+ command. If 'short' is specified, the ref name prefixes 'refs/heads/',
+ 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
+ specified, the full ref name (including prefix) will be printed.
+ This is the same as the log commands '--decorate' option.
+
log.showroot::
If true, the initial commit will be shown as a big creation event.
This is equivalent to a diff against an empty tree.
it takes precedence over this option. To disable pagination for
all commands, set `core.pager` or `GIT_PAGER` to `cat`.
+pretty.<name>::
+ Alias for a --pretty= format string, as specified in
+ linkgit:git-log[1]. Any aliases defined here can be used just
+ as the built-in pretty formats could. For example,
+ running `git config pretty.changelog "format:{asterisk} %H %s"`
+ would cause the invocation `git log --pretty=changelog`
+ to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`.
+ Note that an alias with the same name as a built-in format
+ will be silently ignored.
+
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
If set to true, git-receive-pack will deny a ref update that deletes
the ref. Use this to prevent such a ref deletion via a push.
+receive.denyDeleteCurrent::
+ If set to true, git-receive-pack will deny a ref update that
+ deletes the currently checked out branch of a non-bare repository.
+
receive.denyCurrentBranch::
If set to true or "refuse", git-receive-pack will deny a ref update
to the currently checked out branch of a non-bare repository.
remote.<name>.tagopt::
Setting this value to \--no-tags disables automatic tag following when
- fetching from remote <name>
+ fetching from remote <name>. Setting it to \--tags will fetch every
+ tag from remote <name>, even if they are not reachable from remote
+ branch heads.
remote.<name>.vcs::
Setting this to a value <vcs> will cause git to interact with
summary of commits for modified submodules will be shown (see
--summary-limit option of linkgit:git-submodule[1]).
+submodule.<name>.path::
+submodule.<name>.url::
+submodule.<name>.update::
+ The path within this project, URL, and the updating strategy
+ for a submodule. These variables are initially populated
+ by 'git submodule init'; edit them to override the
+ URL and other values found in the `.gitmodules` file. See
+ linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+
+submodule.<name>.ignore::
+ Defines under what circumstances "git status" and the diff family show
+ a submodule as modified. When set to "all", it will never be considered
+ modified, "dirty" will ignore all changes to the submodules work tree and
+ takes only differences between the HEAD of the submodule and the commit
+ recorded in the superproject into account. "untracked" will additionally
+ let submodules with modified tracked files in their work tree show up.
+ Using "none" (the default when this option is not set) also shows
+ submodules that have untracked files in their work tree as changed.
+ This setting overrides any setting made in .gitmodules for this submodule,
+ both settings can be overriden on the command line by using the
+ "--ignore-submodules" option.
+
tar.umask::
This variable can be used to restrict the permission bits of
tar archive entries. The default is 0002, which turns off the