A short git tutorial
====================
-May 2005
-
Introduction
------------
This is trying to be a short tutorial on setting up and using a git
-archive, mainly because being hands-on and using explicit examples is
+repository, mainly because being hands-on and using explicit examples is
often the best way of explaining what is going on.
In normal life, most people wouldn't use the "core" git programs
doing.
The core git is often called "plumbing", with the prettier user
-interfaces on top of it called "porcelain". You may not want to use the
+interfaces on top of it called "porcelain". You may not want to use the
plumbing directly very often, but it can be good to know what the
plumbing does for when the porcelain isn't flushing...
-Creating a git archive
-----------------------
+Creating a git repository
+-------------------------
-Creating a new git archive couldn't be easier: all git archives start
+Creating a new git repository couldn't be easier: all git repositories start
out empty, and the only thing you need to do is find yourself a
subdirectory that you want to use as a working tree - either an empty
one for a totally new project, or an existing working tree that you want
to import into git.
-For our first example, we're going to start a totally new archive from
-scratch, with no pre-existing files, and we'll call it "git-tutorial".
+For our first example, we're going to start a totally new repository from
+scratch, with no pre-existing files, and we'll call it `git-tutorial`.
To start up, create a subdirectory for it, change into that
-subdirectory, and initialize the git infrastructure with "git-init-db":
+subdirectory, and initialize the git infrastructure with `git-init-db`:
- mkdir git-tutorial
- cd git-tutorial
- git-init-db
+------------------------------------------------
+mkdir git-tutorial
+cd git-tutorial
+git-init-db
+------------------------------------------------
to which git will reply
defaulting to local storage area
which is just git's way of saying that you haven't been doing anything
-strange, and that it will have created a local .git directory setup for
-your new project. You will now have a ".git" directory, and you can
-inspect that with "ls". For your new empty project, ls should show you
-three entries:
-
- - a symlink called HEAD, pointing to "refs/heads/master"
-
- Don't worry about the fact that the file that the HEAD link points to
- doesn't even exist yet - you haven't created the commit that will
- start your HEAD development branch yet.
-
- - a subdirectory called "objects", which will contain all the git SHA1
+strange, and that it will have created a local `.git` directory setup for
+your new project. You will now have a `.git` directory, and you can
+inspect that with `ls`. For your new empty project, it should show you
+three entries, among other things:
+
+ - a symlink called `HEAD`, pointing to `refs/heads/master` (if your
+ platform does not have native symlinks, it is a file containing the
+ line "ref: refs/heads/master")
++
+Don't worry about the fact that the file that the `HEAD` link points to
+doesn't even exist yet -- you haven't created the commit that will
+start your `HEAD` development branch yet.
+
+ - a subdirectory called `objects`, which will contain all the
objects of your project. You should never have any real reason to
look at the objects directly, but you might want to know that these
- objects are what contains all the real _data_ in your repository.
-
- - a subdirectory called "refs", which contains references to objects.
-
- In particular, the "refs" subdirectory will contain two other
- subdirectories, named "heads" and "tags" respectively. They do
- exactly what their names imply: they contain references to any number
- of different "heads" of development (aka "branches"), and to any
- "tags" that you have created to name specific versions of your
- repository.
-
- One note: the special "master" head is the default branch, which is
- why the .git/HEAD file was created as a symlink to it even if it
- doesn't yet exist. Basically, the HEAD link is supposed to always
- point to the branch you are working on right now, and you always
- start out expecting to work on the "master" branch.
-
- However, this is only a convention, and you can name your branches
- anything you want, and don't have to ever even _have_ a "master"
- branch. A number of the git tools will assume that .git/HEAD is
- valid, though.
-
- [ Implementation note: an "object" is identified by its 160-bit SHA1
- hash, aka "name", and a reference to an object is always the 40-byte
- hex representation of that SHA1 name. The files in the "refs"
- subdirectory are expected to contain these hex references (usually
- with a final '\n' at the end), and you should thus expect to see a
- number of 41-byte files containing these references in this refs
- subdirectories when you actually start populating your tree ]
-
-You have now created your first git archive. Of course, since it's
+ objects are what contains all the real 'data' in your repository.
+
+ - a subdirectory called `refs`, which contains references to objects.
+
+In particular, the `refs` subdirectory will contain two other
+subdirectories, named `heads` and `tags` respectively. They do
+exactly what their names imply: they contain references to any number
+of different 'heads' of development (aka 'branches'), and to any
+'tags' that you have created to name specific versions in your
+repository.
+
+One note: the special `master` head is the default branch, which is
+why the `.git/HEAD` file was created as a symlink to it even if it
+doesn't yet exist. Basically, the `HEAD` link is supposed to always
+point to the branch you are working on right now, and you always
+start out expecting to work on the `master` branch.
+
+However, this is only a convention, and you can name your branches
+anything you want, and don't have to ever even 'have' a `master`
+branch. A number of the git tools will assume that `.git/HEAD` is
+valid, though.
+
+[NOTE]
+An 'object' is identified by its 160-bit SHA1 hash, aka 'object name',
+and a reference to an object is always the 40-byte hex
+representation of that SHA1 name. The files in the `refs`
+subdirectory are expected to contain these hex references
+(usually with a final `\'\n\'` at the end), and you should thus
+expect to see a number of 41-byte files containing these
+references in these `refs` subdirectories when you actually start
+populating your tree.
+
+[NOTE]
+An advanced user may want to take a look at the
+link:repository-layout.html[repository layout] document
+after finishing this tutorial.
+
+You have now created your first git repository. Of course, since it's
empty, that's not very useful, so let's start populating it with data.
- Populating a git archive
- ------------------------
+Populating a git repository
+---------------------------
We'll keep this simple and stupid, so we'll start off with populating a
few trivial files just to get a feel for it.
Start off with just creating any random files that you want to maintain
-in your git archive. We'll start off with a few bad examples, just to
+in your git repository. We'll start off with a few bad examples, just to
get a feel for how this works:
- echo "Hello World" > a
- echo "Silly example" > b
+------------------------------------------------
+echo "Hello World" >hello
+echo "Silly example" >example
+------------------------------------------------
-you have now created two files in your working directory, but to
+you have now created two files in your working tree (aka 'working directory'), but to
actually check in your hard work, you will have to go through two steps:
- - fill in the "cache" aka "index" file with the information about your
- working directory state
+ - fill in the 'index' file (aka 'cache') with the information about your
+ working tree state.
- commit that index file as an object.
The first step is trivial: when you want to tell git about any changes
-to your working directory, you use the "git-update-cache" program. That
+to your working tree, you use the `git-update-index` program. That
program normally just takes a list of filenames you want to update, but
to avoid trivial mistakes, it refuses to add new entries to the cache
(or remove existing ones) unless you explicitly tell it that you're
-adding a new entry with the "--add" flag (or removing an entry with the
-"--remove") flag.
+adding a new entry with the `\--add` flag (or removing an entry with the
+`\--remove`) flag.
So to populate the index with the two files you just created, you can do
- git-update-cache --add a b
+------------------------------------------------
+git-update-index --add hello example
+------------------------------------------------
and you have now told git to track those two files.
In fact, as you did that, if you now look into your object directory,
you'll notice that git will have added two new objects to the object
-store. If you did exactly the steps above, you should now be able to do
+database. If you did exactly the steps above, you should now be able to do
ls .git/objects/??/*
.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962
-which correspond with the object with SHA1 names of 557db... and f24c7..
+which correspond with the objects with names of 557db... and f24c7..
respectively.
-If you want to, you can use "git-cat-file" to look at those objects, but
+If you want to, you can use `git-cat-file` to look at those objects, but
you'll have to use the object name, not the filename of the object:
git-cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238
-where the "-t" tells git-cat-file to tell you what the "type" of the
-object is. Git will tell you that you have a "blob" object (ie just a
+where the `-t` tells `git-cat-file` to tell you what the "type" of the
+object is. git will tell you that you have a "blob" object (ie just a
regular file), and you can see the contents with
- git-cat-file "blob" 557db03de997c86a4a028e1ebd3a1ceb225be238
+ git-cat-file "blob" 557db03
-which will print out "Hello World". The object 557db... is nothing
-more than the contents of your file "a".
+which will print out "Hello World". The object 557db03 is nothing
+more than the contents of your file `hello`.
-[ Digression: don't confuse that object with the file "a" itself. The
- object is literally just those specific _contents_ of the file, and
- however much you later change the contents in file "a", the object we
- just looked at will never change. Objects are immutable. ]
+[NOTE]
+Don't confuse that object with the file `hello` itself. The
+object is literally just those specific *contents* of the file, and
+however much you later change the contents in file `hello`, the object
+we just looked at will never change. Objects are immutable.
+
+[NOTE]
+The second example demonstrates that you can
+abbreviate the object name to only the first several
+hexadecimal digits in most places.
Anyway, as we mentioned previously, you normally never actually take a
-look at the objects themselves, and typing long 40-character hex SHA1
-names is not something you'd normally want to do. The above digression
-was just to show that "git-update-cache" did something magical, and
-actually saved away the contents of your files into the git content
-store.
-
-Updating the cache did something else too: it created a ".git/index"
-file. This is the index that describes your current working tree, and
-something you should be very aware of. Again, you normally never worry
+look at the objects themselves, and typing long 40-character hex
+names is not something you'd normally want to do. The above digression
+was just to show that `git-update-index` did something magical, and
+actually saved away the contents of your files into the git object
+database.
+
+Updating the cache did something else too: it created a `.git/index`
+file. This is the index that describes your current working tree, and
+something you should be very aware of. Again, you normally never worry
about the index file itself, but you should be aware of the fact that
you have not actually really "checked in" your files into git so far,
-you've only _told_ git about them.
+you've only *told* git about them.
However, since git knows about them, you can now start using some of the
most basic git commands to manipulate the files or look at their status.
In particular, let's not even check in the two files into git yet, we'll
-start off by adding another line to "a" first:
+start off by adding another line to `hello` first:
- echo "It's a new day for git" >> a
+------------------------------------------------
+echo "It's a new day for git" >>hello
+------------------------------------------------
-and you can now, since you told git about the previous state of "a", ask
+and you can now, since you told git about the previous state of `hello`, ask
git what has changed in the tree compared to your old index, using the
-"git-diff-files" command:
+`git-diff-files` command:
- git-diff-files
+------------
+git-diff-files
+------------
-oops. That wasn't very readable. It just spit out its own internal
-version of a "diff", but that internal version really just tells you
-that it has noticed that "a" has been modified, and that the old object
+Oops. That wasn't very readable. It just spit out its own internal
+version of a `diff`, but that internal version really just tells you
+that it has noticed that "hello" has been modified, and that the old object
contents it had have been replaced with something else.
To make it readable, we can tell git-diff-files to output the
-differences as a patch, using the "-p" flag:
+differences as a patch, using the `-p` flag:
- git-diff-files -p
+------------
+git-diff-files -p
+------------
which will spit out
- diff --git a/a b/a
- --- a/a
- +++ b/a
- @@ -1 +1,2 @@
- Hello World
- +It's a new day for git
-
-ie the diff of the change we caused by adding another line to "a".
-
-In other words, git-diff-files always shows us the difference between
+------------
+diff --git a/hello b/hello
+index 557db03..263414f 100644
+--- a/hello
++++ b/hello
+@@ -1 +1,2 @@
+ Hello World
++It's a new day for git
+----
+
+i.e. the diff of the change we caused by adding another line to `hello`.
+
+In other words, `git-diff-files` always shows us the difference between
what is recorded in the index, and what is currently in the working
tree. That's very useful.
-A common shorthand for "git-diff-files -p" is to just write
-
- git diff
+A common shorthand for `git-diff-files -p` is to just write `git
+diff`, which will do the same thing.
-which will do the same thing.
-
- Committing git state
- --------------------
+Committing git state
+--------------------
Now, we want to go to the next stage in git, which is to take the files
that git knows about in the index, and commit them as a real tree. We do
-that in two phases: creating a "tree" object, and committing that "tree"
-object as a "commit" object together with an explanation of what the
+that in two phases: creating a 'tree' object, and committing that 'tree'
+object as a 'commit' object together with an explanation of what the
tree was all about, along with information of how we came to that state.
-Creating a tree object is trivial, and is done with "git-write-tree".
+Creating a tree object is trivial, and is done with `git-write-tree`.
There are no options or other input: git-write-tree will take the
current index state, and write an object that describes that whole
-index. In other words, we're now tying together all the different
+index. In other words, we're now tying together all the different
filenames with their contents (and their permissions), and we're
creating the equivalent of a git "directory" object:
- git-write-tree
+------------------------------------------------
+git-write-tree
+------------------------------------------------
and this will just output the name of the resulting tree, in this case
-(if you have does exactly as I've described) it should be
+(if you have done exactly as I've described) it should be
- 3ede4ed7e895432c0a247f09d71a76db53bd0fa4
+ 8988da15d077d4829fc51d8544c097def6644dbb
which is another incomprehensible object name. Again, if you want to,
-you can use "git-cat-file -t 3ede4.." to see that this time the object
+you can use `git-cat-file -t 8988d\...` to see that this time the object
is not a "blob" object, but a "tree" object (you can also use
-git-cat-file to actually output the raw object contents, but you'll see
+`git-cat-file` to actually output the raw object contents, but you'll see
mainly a binary mess, so that's less interesting).
-However - normally you'd never use "git-write-tree" on its own, because
+However -- normally you'd never use `git-write-tree` on its own, because
normally you always commit a tree into a commit object using the
-"git-commit-tree" command. In fact, it's easier to not actually use
-git-write-tree on its own at all, but to just pass its result in as an
-argument to "git-commit-tree".
-
-"git-commit-tree" normally takes several arguments - it wants to know
-what the _parent_ of a commit was, but since this is the first commit
-ever in this new archive, and it has no parents, we only need to pass in
-the tree ID. However, git-commit-tree also wants to get a commit message
-on its standard input, and it will write out the resulting ID for the
+`git-commit-tree` command. In fact, it's easier to not actually use
+`git-write-tree` on its own at all, but to just pass its result in as an
+argument to `git-commit-tree`.
+
+`git-commit-tree` normally takes several arguments -- it wants to know
+what the 'parent' of a commit was, but since this is the first commit
+ever in this new repository, and it has no parents, we only need to pass in
+the object name of the tree. However, `git-commit-tree`
+also wants to get a commit message
+on its standard input, and it will write out the resulting object name for the
commit to its standard output.
-And this is where we start using the .git/HEAD file. The HEAD file is
-supposed to contain the reference to the top-of-tree, and since that's
-exactly what git-commit-tree spits out, we can do this all with a simple
-shell pipeline:
+And this is where we create the `.git/refs/heads/master` file
+which is pointed at by `HEAD`. This file is supposed to contain
+the reference to the top-of-tree of the master branch, and since
+that's exactly what `git-commit-tree` spits out, we can do this
+all with a sequence of simple shell commands:
- echo "Initial commit" | git-commit-tree $(git-write-tree) > .git/HEAD
+------------------------------------------------
+tree=$(git-write-tree)
+commit=$(echo 'Initial commit' | git-commit-tree $tree)
+git-update-ref HEAD $(commit)
+------------------------------------------------
which will say:
- Committing initial tree 3ede4ed7e895432c0a247f09d71a76db53bd0fa4
+ Committing initial tree 8988da15d077d4829fc51d8544c097def6644dbb
just to warn you about the fact that it created a totally new commit
-that is not related to anything else. Normally you do this only _once_
+that is not related to anything else. Normally you do this only *once*
for a project ever, and all later commits will be parented on top of an
earlier commit, and you'll never see this "Committing initial tree"
message ever again.
-Again, normally you'd never actually do this by hand. There is a
-helpful script called "git commit" that will do all of this for you. So
-you could have just writtten
-
- git commit
-
+Again, normally you'd never actually do this by hand. There is a
+helpful script called `git commit` that will do all of this for you. So
+you could have just written `git commit`
instead, and it would have done the above magic scripting for you.
- Making a change
- ---------------
+Making a change
+---------------
-Remember how we did the "git-update-cache" on file "a" and then we
-changed "a" afterward, and could compare the new state of "a" with the
+Remember how we did the `git-update-index` on file `hello` and then we
+changed `hello` afterward, and could compare the new state of `hello` with the
state we saved in the index file?
-Further, remember how I said that "git-write-tree" writes the contents
-of the _index_ file to the tree, and thus what we just committed was in
-fact the _original_ contents of the file "a", not the new ones. We did
+Further, remember how I said that `git-write-tree` writes the contents
+of the *index* file to the tree, and thus what we just committed was in
+fact the *original* contents of the file `hello`, not the new ones. We did
that on purpose, to show the difference between the index state, and the
-state in the working directory, and how they don't have to match, even
+state in the working tree, and how they don't have to match, even
when we commit things.
-As before, if we do "git-diff-files -p" in our git-tutorial project,
+As before, if we do `git-diff-files -p` in our git-tutorial project,
we'll still see the same difference we saw last time: the index file
-hasn't changed by the act of committing anything. However, now that we
+hasn't changed by the act of committing anything. However, now that we
have committed something, we can also learn to use a new command:
-"git-diff-cache".
+`git-diff-index`.
-Unlike "git-diff-files", which showed the difference between the index
-file and the working directory, "git-diff-cache" shows the differences
-between a committed _tree_ and either the the index file or the working
-directory. In other words, git-diff-cache wants a tree to be diffed
+Unlike `git-diff-files`, which showed the difference between the index
+file and the working tree, `git-diff-index` shows the differences
+between a committed *tree* and either the index file or the working
+tree. In other words, `git-diff-index` wants a tree to be diffed
against, and before we did the commit, we couldn't do that, because we
didn't have anything to diff against.
-But now we can do
+But now we can do
- git-diff-cache -p HEAD
+ git-diff-index -p HEAD
-(where "-p" has the same meaning as it did in git-diff-files), and it
+(where `-p` has the same meaning as it did in `git-diff-files`), and it
will show us the same difference, but for a totally different reason.
-Now we're comparing the working directory not against the index file,
-but against the tree we just wrote. It just so happens that those two
+Now we're comparing the working tree not against the index file,
+but against the tree we just wrote. It just so happens that those two
are obviously the same, so we get the same result.
Again, because this is a common operation, you can also just shorthand
which ends up doing the above for you.
-In other words, "git-diff-cache" normally compares a tree against the
-working directory, but when given the "--cached" flag, it is told to
+In other words, `git-diff-index` normally compares a tree against the
+working tree, but when given the `\--cached` flag, it is told to
instead compare against just the index cache contents, and ignore the
-current working directory state entirely. Since we just wrote the index
-file to HEAD, doing "git-diff-cache --cached -p HEAD" should thus return
+current working tree state entirely. Since we just wrote the index
+file to HEAD, doing `git-diff-index \--cached -p HEAD` should thus return
an empty set of differences, and that's exactly what it does.
-[ Digression: "git-diff-cache" really always uses the index for its
- comparisons, and saying that it compares a tree against the working
- directory is thus not strictly accurate. In particular, the list of
- files to compare (the "meta-data") _always_ comes from the index file,
- regardless of whether the --cached flag is used or not. The --cached
- flag really only determines whether the file _contents_ to be compared
- come from the working directory or not.
-
- This is not hard to understand, as soon as you realize that git simply
- never knows (or cares) about files that it is not told about
- explicitly. Git will never go _looking_ for files to compare, it
- expects you to tell it what the files are, and that's what the index
- is there for. ]
-
-However, our next step is to commit the _change_ we did, and again, to
+[NOTE]
+================
+`git-diff-index` really always uses the index for its
+comparisons, and saying that it compares a tree against the working
+tree is thus not strictly accurate. In particular, the list of
+files to compare (the "meta-data") *always* comes from the index file,
+regardless of whether the `\--cached` flag is used or not. The `\--cached`
+flag really only determines whether the file *contents* to be compared
+come from the working tree or not.
+
+This is not hard to understand, as soon as you realize that git simply
+never knows (or cares) about files that it is not told about
+explicitly. git will never go *looking* for files to compare, it
+expects you to tell it what the files are, and that's what the index
+is there for.
+================
+
+However, our next step is to commit the *change* we did, and again, to
understand what's going on, keep in mind the difference between "working
-directory contents", "index file" and "committed tree". We have changes
-in the working directory that we want to commit, and we always have to
+tree contents", "index file" and "committed tree". We have changes
+in the working tree that we want to commit, and we always have to
work through the index file, so the first thing we need to do is to
update the index cache:
- git-update-cache a
+------------------------------------------------
+git-update-index hello
+------------------------------------------------
-(note how we didn't need the "--add" flag this time, since git knew
+(note how we didn't need the `\--add` flag this time, since git knew
about the file already).
-Note what happens to the different git-diff-xxx versions here. After
-we've updated "a" in the index, "git-diff-files -p" now shows no
-differences, but "git-diff-cache -p HEAD" still _does_ show that the
-current state is different from the state we committed. In fact, now
-"git-diff-cache" shows the same difference whether we use the "--cached"
-flag or not, since now the index is coherent with the working directory.
-
-Now, since we've updated "a" in the index, we can commit the new
-version. We could do it by writing the tree by hand again, and
-committing the tree (this time we'd have to use the "-p HEAD" flag to
-tell commit that the HEAD was the _parent_ of the new commit, and that
+Note what happens to the different `git-diff-\*` versions here. After
+we've updated `hello` in the index, `git-diff-files -p` now shows no
+differences, but `git-diff-index -p HEAD` still *does* show that the
+current state is different from the state we committed. In fact, now
+`git-diff-index` shows the same difference whether we use the `--cached`
+flag or not, since now the index is coherent with the working tree.
+
+Now, since we've updated `hello` in the index, we can commit the new
+version. We could do it by writing the tree by hand again, and
+committing the tree (this time we'd have to use the `-p HEAD` flag to
+tell commit that the HEAD was the *parent* of the new commit, and that
this wasn't an initial commit any more), but you've done that once
already, so let's just use the helpful script this time:
- git commit
+------------------------------------------------
+git commit
+------------------------------------------------
which starts an editor for you to write the commit message and tells you
-a bit about what you're doing.
+a bit about what you have done.
Write whatever message you want, and all the lines that start with '#'
will be pruned out, and the rest will be used as the commit message for
the change. If you decide you don't want to commit anything after all at
this point (you can continue to edit things and update the cache), you
-can just leave an empty message. Otherwise git-commit-script will commit
+can just leave an empty message. Otherwise `git commit` will commit
the change for you.
You've now made your first real git commit. And if you're interested in
-looking at what git-commit-script really does, feel free to investigate:
+looking at what `git commit` really does, feel free to investigate:
it's a few very simple shell scripts to generate the helpful (?) commit
-message headers, and a few one-liners that actually do the commit itself.
+message headers, and a few one-liners that actually do the
+commit itself (`git-commit`).
- Checking it out
- ---------------
+Inspecting Changes
+------------------
While creating changes is useful, it's even more useful if you can tell
-later what changed. The most useful command for this is another of the
-"diff" family, namely "git-diff-tree".
+later what changed. The most useful command for this is another of the
+`diff` family, namely `git-diff-tree`.
-git-diff-tree can be given two arbitrary trees, and it will tell you the
+`git-diff-tree` can be given two arbitrary trees, and it will tell you the
differences between them. Perhaps even more commonly, though, you can
give it just a single commit object, and it will figure out the parent
of that commit itself, and show the difference directly. Thus, to get
git-diff-tree -p HEAD
-(again, "-p" means to show the difference as a human-readable patch),
-and it will show what the last commit (in HEAD) actually changed.
+(again, `-p` means to show the difference as a human-readable patch),
+and it will show what the last commit (in `HEAD`) actually changed.
-More interestingly, you can also give git-diff-tree the "-v" flag, which
+More interestingly, you can also give `git-diff-tree` the `-v` flag, which
tells it to also show the commit message and author and date of the
commit, and you can tell it to show a whole series of diffs.
Alternatively, you can tell it to be "silent", and not show the diffs at
all, but just show the actual commit message.
-In fact, together with the "git-rev-list" program (which generates a
-list of revisions), git-diff-tree ends up being a veritable fount of
-changes. A trivial (but very useful) script called "git-whatchanged" is
+In fact, together with the `git-rev-list` program (which generates a
+list of revisions), `git-diff-tree` ends up being a veritable fount of
+changes. A trivial (but very useful) script called `git-whatchanged` is
included with git which does exactly this, and shows a log of recent
-activity.
+activities.
To see the whole history of our pitiful little git-tutorial project, you
can do
and you will see exactly what has changed in the repository over its
short history.
-[ Side note: the "--root" flag is a flag to git-diff-tree to tell it to
- show the initial aka "root" commit too. Normally you'd probably not
- want to see the initial import diff, but since the tutorial project
- was started from scratch and is so small, we use it to make the result
- a bit more interesting ]
+[NOTE]
+The `\--root` flag is a flag to `git-diff-tree` to tell it to
+show the initial aka 'root' commit too. Normally you'd probably not
+want to see the initial import diff, but since the tutorial project
+was started from scratch and is so small, we use it to make the result
+a bit more interesting.
With that, you should now be having some inkling of what git does, and
can explore on your own.
-
-[ Side note: most likely, you are not directly using the core
- git Plumbing commands, but using Porcelain like Cogito on top
- of it. Cogito works a bit differently and you usually do not
- have to run "git-update-cache" yourself for changed files (you
- do tell underlying git about additions and removals via
- "cg-add" and "cg-rm" commands). Just before you make a commit
- with "cg-commit", Cogito figures out which files you modified,
- and runs "git-update-cache" on them for you. ]
+[NOTE]
+Most likely, you are not directly using the core
+git Plumbing commands, but using Porcelain like Cogito on top
+of it. Cogito works a bit differently and you usually do not
+have to run `git-update-index` yourself for changed files (you
+do tell underlying git about additions and removals via
+`cg-add` and `cg-rm` commands). Just before you make a commit
+with `cg-commit`, Cogito figures out which files you modified,
+and runs `git-update-index` on them for you.
- Tagging a version
- -----------------
+Tagging a version
+-----------------
-In git, there's two kinds of tags, a "light" one, and a "signed tag".
+In git, there are two kinds of tags, a "light" one, and an "annotated tag".
A "light" tag is technically nothing more than a branch, except we put
-it in the ".git/refs/tags/" subdirectory instead of calling it a "head".
+it in the `.git/refs/tags/` subdirectory instead of calling it a `head`.
So the simplest form of tag involves nothing more than
- git tag my-first-tag
+------------------------------------------------
+git tag my-first-tag
+------------------------------------------------
-which just writes the current HEAD into the .git/refs/tags/my-first-tag
+which just writes the current `HEAD` into the `.git/refs/tags/my-first-tag`
file, after which point you can then use this symbolic name for that
-particular state. You can, for example, do
+particular state. You can, for example, do
git diff my-first-tag
to diff your current state against that tag (which at this point will
obviously be an empty diff, but if you continue to develop and commit
-stuff, you can use your tag as a "anchor-point" to see what has changed
+stuff, you can use your tag as an "anchor-point" to see what has changed
since you tagged it.
-A "signed tag" is actually a real git object, and contains not only a
+An "annotated tag" is actually a real git object, and contains not only a
pointer to the state you want to tag, but also a small tag name and
-message, along with a PGP signature that says that yes, you really did
-that tag. You create these signed tags with the "-s" flag to "git tag":
+message, along with optionally a PGP signature that says that yes,
+you really did
+that tag. You create these annotated tags with either the `-a` or
+`-s` flag to `git tag`:
git tag -s <tagname>
-which will sign the current HEAD (but you can also give it another
+which will sign the current `HEAD` (but you can also give it another
argument that specifies the thing to tag, ie you could have tagged the
-current "mybranch" point by using "git tag <tagname> mybranch").
+current `mybranch` point by using `git tag <tagname> mybranch`).
You normally only do signed tags for major releases or things
like that, while the light-weight tags are useful for any marking you
-want to do - any time you decide that you want to remember a certain
+want to do -- any time you decide that you want to remember a certain
point, just create a private tag for it, and you have a nice symbolic
name for the state at that point.
- Copying archives
- -----------------
+Copying repositories
+--------------------
-Git archives are normally totally self-sufficient, and it's worth noting
+git repositories are normally totally self-sufficient, and it's worth noting
that unlike CVS, for example, there is no separate notion of
-"repository" and "working tree". A git repository normally _is_ the
-working tree, with the local git information hidden in the ".git"
-subdirectory. There is nothing else. What you see is what you got.
-
-[ Side note: you can tell git to split the git internal information from
- the directory that it tracks, but we'll ignore that for now: it's not
- how normal projects work, and it's really only meant for special uses.
- So the mental model of "the git information is always tied directly to
- the working directory that it describes" may not be technically 100%
- accurate, but it's a good model for all normal use ]
+"repository" and "working tree". A git repository normally *is* the
+working tree, with the local git information hidden in the `.git`
+subdirectory. There is nothing else. What you see is what you got.
+
+[NOTE]
+You can tell git to split the git internal information from
+the directory that it tracks, but we'll ignore that for now: it's not
+how normal projects work, and it's really only meant for special uses.
+So the mental model of "the git information is always tied directly to
+the working tree that it describes" may not be technically 100%
+accurate, but it's a good model for all normal use.
This has two implications:
- - if you grow bored with the tutorial archive you created (or you've
+ - if you grow bored with the tutorial repository you created (or you've
made a mistake and want to start all over), you can just do simple
rm -rf git-tutorial
++
+and it will be gone. There's no external repository, and there's no
+history outside the project you created.
- and it will be gone. There's no external repository, and there's no
- history outside of the project you created.
-
- - if you want to move or duplicate a git archive, you can do so. There
- is "git clone" command, but if all you want to do is just to
- create a copy of your archive (with all the full history that
+ - if you want to move or duplicate a git repository, you can do so. There
+ is `git clone` command, but if all you want to do is just to
+ create a copy of your repository (with all the full history that
went along with it), you can do so with a regular
- "cp -a git-tutorial new-git-tutorial".
-
- Note that when you've moved or copied a git archive, your git index
- file (which caches various information, notably some of the "stat"
- information for the files involved) will likely need to be refreshed.
- So after you do a "cp -a" to create a new copy, you'll want to do
+ `cp -a git-tutorial new-git-tutorial`.
++
+Note that when you've moved or copied a git repository, your git index
+file (which caches various information, notably some of the "stat"
+information for the files involved) will likely need to be refreshed.
+So after you do a `cp -a` to create a new copy, you'll want to do
- git-update-cache --refresh
+ git-update-index --refresh
++
+in the new repository to make sure that the index file is up-to-date.
- to make sure that the index file is up-to-date in the new one.
-
-Note that the second point is true even across machines. You can
-duplicate a remote git archive with _any_ regular copy mechanism, be it
-"scp", "rsync" or "wget".
+Note that the second point is true even across machines. You can
+duplicate a remote git repository with *any* regular copy mechanism, be it
+`scp`, `rsync` or `wget`.
When copying a remote repository, you'll want to at a minimum update the
-index cache when you do this, and especially with other peoples
+index cache when you do this, and especially with other peoples'
repositories you often want to make sure that the index cache is in some
-known state (you don't know _what_ they've done and not yet checked in),
-so usually you'll precede the "git-update-cache" with a
+known state (you don't know *what* they've done and not yet checked in),
+so usually you'll precede the `git-update-index` with a
git-read-tree --reset HEAD
- git-update-cache --refresh
+ git-update-index --refresh
-which will force a total index re-build from the tree pointed to by HEAD
-(it resets the index contents to HEAD, and then the git-update-cache
-makes sure to match up all index entries with the checked-out files).
+which will force a total index re-build from the tree pointed to by `HEAD`.
+It resets the index contents to `HEAD`, and then the `git-update-index`
+makes sure to match up all index entries with the checked-out files.
+If the original repository had uncommitted changes in its
+working tree, `git-update-index --refresh` notices them and
+tells you they need to be updated.
The above can also be written as simply
git reset
and in fact a lot of the common git command combinations can be scripted
-with the "git xyz" interfaces, and you can learn things by just looking
-at what the git-*-script scripts do ("git reset" is the above two lines
-implemented in "git-reset-script", but some things like "git status" and
-"git commit" are slightly more complex scripts around the basic git
-commands).
-
-NOTE! Many (most?) public remote repositories will not contain any of
-the checked out files or even an index file, and will _only_ contain the
-actual core git files. Such a repository usually doesn't even have the
-".git" subdirectory, but has all the git files directly in the
+with the `git xyz` interfaces. You can learn things by just looking
+at what the various git scripts do. For example, `git reset` is the
+above two lines implemented in `git-reset`, but some things like
+`git status` and `git commit` are slightly more complex scripts around
+the basic git commands.
+
+Many (most?) public remote repositories will not contain any of
+the checked out files or even an index file, and will *only* contain the
+actual core git files. Such a repository usually doesn't even have the
+`.git` subdirectory, but has all the git files directly in the
repository.
To create your own local live copy of such a "raw" git repository, you'd
first create your own subdirectory for the project, and then copy the
-raw repository contents into the ".git" directory. For example, to
+raw repository contents into the `.git` directory. For example, to
create your own copy of the git repository, you'd do the following
mkdir my-git
cd my-git
- rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git .git
+ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git
followed by
to populate the index. However, now you have populated the index, and
you have all the git internal files, but you will notice that you don't
-actually have any of the _working_directory_ files to work on. To get
+actually have any of the working tree files to work on. To get
those, you'd check them out with
- git-checkout-cache -u -a
+ git-checkout-index -u -a
-where the "-u" flag means that you want the checkout to keep the index
+where the `-u` flag means that you want the checkout to keep the index
up-to-date (so that you don't have to refresh it afterward), and the
-"-a" flag means "check out all files" (if you have a stale copy or an
-older version of a checked out tree you may also need to add the "-f"
-flag first, to tell git-checkout-cache to _force_ overwriting of any old
+`-a` flag means "check out all files" (if you have a stale copy or an
+older version of a checked out tree you may also need to add the `-f`
+flag first, to tell git-checkout-index to *force* overwriting of any old
files).
Again, this can all be simplified with
repository, and checked it out.
- Creating a new branch
- ---------------------
+Creating a new branch
+---------------------
Branches in git are really nothing more than pointers into the git
-object space from within the ".git/refs/" subdirectory, and as we
-already discussed, the HEAD branch is nothing but a symlink to one of
+object database from within the `.git/refs/` subdirectory, and as we
+already discussed, the `HEAD` branch is nothing but a symlink to one of
these object pointers.
You can at any time create a new branch by just picking an arbitrary
point in the project history, and just writing the SHA1 name of that
-object into a file under .git/refs/heads/. You can use any filename you
+object into a file under `.git/refs/heads/`. You can use any filename you
want (and indeed, subdirectories), but the convention is that the
-"normal" branch is called "master". That's just a convention, though,
+"normal" branch is called `master`. That's just a convention, though,
and nothing enforces it.
-To show that as an example, let's go back to the git-tutorial archive we
+To show that as an example, let's go back to the git-tutorial repository we
used earlier, and create a branch in it. You do that by simply just
saying that you want to check out a new branch:
- git checkout -b mybranch
+------------
+git checkout -b mybranch
+------------
-will create a new branch based at the current HEAD position, and switch
+will create a new branch based at the current `HEAD` position, and switch
to it.
-[ Side note: if you make the decision to start your new branch at some
- other point in the history than the current HEAD, you can do so by
- just telling "git checkout" what the base of the checkout would be.
- In other words, if you have an earlier tag or branch, you'd just do
+[NOTE]
+================================================
+If you make the decision to start your new branch at some
+other point in the history than the current `HEAD`, you can do so by
+just telling `git checkout` what the base of the checkout would be.
+In other words, if you have an earlier tag or branch, you'd just do
- git checkout -b mybranch earlier-branch
+------------
+git checkout -b mybranch earlier-commit
+------------
- and it would create the new branch "mybranch" at the earlier point,
- and check out the state at that time. ]
+and it would create the new branch `mybranch` at the earlier commit,
+and check out the state at that time.
+================================================
-You can always just jump back to your original "master" branch by doing
+You can always just jump back to your original `master` branch by doing
- git checkout master
+------------
+git checkout master
+------------
(or any other branch-name, for that matter) and if you forget which
branch you happen to be on, a simple
- ls -l .git/HEAD
+------------
+ls -l .git/HEAD
+------------
+
+will tell you where it's pointing (Note that on platforms with bad or no
+symlink support, you have to execute
+
+------------
+cat .git/HEAD
+------------
-will tell you where it's pointing.
+instead). To get the list of branches you have, you can say
-NOTE! Sometimes you may wish to create a new branch _without_ actually
+------------
+git branch
+------------
+
+which is nothing more than a simple script around `ls .git/refs/heads`.
+There will be asterisk in front of the branch you are currently on.
+
+Sometimes you may wish to create a new branch _without_ actually
checking it out and switching to it. If so, just use the command
- git branch <branchname> [startingpoint]
+------------
+git branch <branchname> [startingpoint]
+------------
which will simply _create_ the branch, but will not do anything further.
-You can then later - once you decide that you want to actually develop
-on that branch - switch to that branch with a regular "git checkout"
+You can then later -- once you decide that you want to actually develop
+on that branch -- switch to that branch with a regular `git checkout`
with the branchname as the argument.
- Merging two branches
- --------------------
+Merging two branches
+--------------------
One of the ideas of having a branch is that you do some (possibly
experimental) work in it, and eventually merge it back to the main
-branch. So assuming you created the above "mybranch" that started out
-being the same as the original "master" branch, let's make sure we're in
+branch. So assuming you created the above `mybranch` that started out
+being the same as the original `master` branch, let's make sure we're in
that branch, and do some work there.
- git checkout mybranch
- echo "Work, work, work" >> a
- git commit a
+------------------------------------------------
+git checkout mybranch
+echo "Work, work, work" >>hello
+git commit -m 'Some work.' hello
+------------------------------------------------
-Here, we just added another line to "a", and we used a shorthand for
-both going a "git-update-cache a" and "git commit" by just giving the
-filename directly to "git commit".
+Here, we just added another line to `hello`, and we used a shorthand for
+doing both `git-update-index hello` and `git commit` by just giving the
+filename directly to `git commit`. The `-m` flag is to give the
+commit log message from the command line.
Now, to make it a bit more interesting, let's assume that somebody else
does some work in the original branch, and simulate that by going back
to the master branch, and editing the same file differently there:
- git checkout master
+------------
+git checkout master
+------------
-Here, take a moment to look at the contents of "a", and notice how they
-don't contain the work we just did in "mybranch" - because that work
-hasn't happened in the "master" branch at all. Then do
+Here, take a moment to look at the contents of `hello`, and notice how they
+don't contain the work we just did in `mybranch` -- because that work
+hasn't happened in the `master` branch at all. Then do
- echo "Play, play, play" >> a
- echo "Lots of fun" >> b
- git commit a b
+------------
+echo "Play, play, play" >>hello
+echo "Lots of fun" >>example
+git commit -m 'Some fun.' hello example
+------------
since the master branch is obviously in a much better mood.
gitk --all
-will show you graphically both of your branches (that's what the "--all"
-means: normally it will just show you your current HEAD) and their
-histories. You can also see exactly how they came to be from a common
+will show you graphically both of your branches (that's what the `\--all`
+means: normally it will just show you your current `HEAD`) and their
+histories. You can also see exactly how they came to be from a common
source.
-Anyway, let's exit gitk (^Q or the File menu), and decide that we want
-to merge the work we did on the "mybranch" branch into the "master"
-branch (which is currently our HEAD too). To do that, there's a nice
-script called "git resolve", which wants to know which branches you want
+Anyway, let's exit `gitk` (`^Q` or the File menu), and decide that we want
+to merge the work we did on the `mybranch` branch into the `master`
+branch (which is currently our `HEAD` too). To do that, there's a nice
+script called `git resolve`, which wants to know which branches you want
to resolve and what the merge is all about:
- git resolve HEAD mybranch "Merge work in mybranch"
+------------
+git resolve HEAD mybranch "Merge work in mybranch"
+------------
where the third argument is going to be used as the commit message if
the merge can be resolved automatically.
Now, in this case we've intentionally created a situation where the
merge will need to be fixed up by hand, though, so git will do as much
-of it as it can automatically (which in this case is just merge the "b"
-file, which had no differences in the "mybranch" branch), and say:
+of it as it can automatically (which in this case is just merge the `example`
+file, which had no differences in the `mybranch` branch), and say:
Simple merge failed, trying Automatic merge
- Auto-merging a.
+ Auto-merging hello.
merge: warning: conflicts during merge
- ERROR: Merge conflict in a.
+ ERROR: Merge conflict in hello.
fatal: merge program failed
Automatic merge failed, fix up by hand
which is way too verbose, but it basically tells you that it failed the
really trivial merge ("Simple merge") and did an "Automatic merge"
-instead, but that too failed due to conflicts in "a".
+instead, but that too failed due to conflicts in `hello`.
-Not to worry. It left the (trivial) conflict in "a" in the same form you
+Not to worry. It left the (trivial) conflict in `hello` in the same form you
should already be well used to if you've ever used CVS, so let's just
-open "a" in our editor (whatever that may be), and fix it up somehow.
-I'd suggest just making it so that "a" contains all four lines:
+open `hello` in our editor (whatever that may be), and fix it up somehow.
+I'd suggest just making it so that `hello` contains all four lines:
- Hello World
- It's a new day for git
- Play, play, play
- Work, work, work
+------------
+Hello World
+It's a new day for git
+Play, play, play
+Work, work, work
+------------
and once you're happy with your manual merge, just do a
- git commit a
+------------
+git commit hello
+------------
which will very loudly warn you that you're now committing a merge
(which is correct, so never mind), and you can write a small merge
-message about your adventures in git-merge-land.
+message about your adventures in git-merge-land.
-After you're done, start up "gitk --all" to see graphically what the
-history looks like. Notice that "mybranch" still exists, and you can
-switch to it, and continue to work with it if you want to. The
-"mybranch" branch will not contain the merge, but next time you merge it
-from the "master" branch, git will know how you merged it, so you'll not
+After you're done, start up `gitk \--all` to see graphically what the
+history looks like. Notice that `mybranch` still exists, and you can
+switch to it, and continue to work with it if you want to. The
+`mybranch` branch will not contain the merge, but next time you merge it
+from the `master` branch, git will know how you merged it, so you'll not
have to do _that_ merge again.
+Another useful tool, especially if you do not always work in X-Window
+environment, is `git show-branch`.
+
+------------------------------------------------
+$ git show-branch master mybranch
+* [master] Merged "mybranch" changes.
+ ! [mybranch] Some work.
+--
++ [master] Merged "mybranch" changes.
+++ [mybranch] Some work.
+------------------------------------------------
+
+The first two lines indicate that it is showing the two branches
+and the first line of the commit log message from their
+top-of-the-tree commits, you are currently on `master` branch
+(notice the asterisk `*` character), and the first column for
+the later output lines is used to show commits contained in the
+`master` branch, and the second column for the `mybranch`
+branch. Three commits are shown along with their log messages.
+All of them have plus `+` characters in the first column, which
+means they are now part of the `master` branch. Only the "Some
+work" commit has the plus `+` character in the second column,
+because `mybranch` has not been merged to incorporate these
+commits from the master branch. The string inside brackets
+before the commit log message is a short name you can use to
+name the commit. In the above example, 'master' and 'mybranch'
+are branch heads. 'master~1' is the first parent of 'master'
+branch head. Please see 'git-rev-parse' documentation if you
+see more complex cases.
+
+Now, let's pretend you are the one who did all the work in
+`mybranch`, and the fruit of your hard work has finally been merged
+to the `master` branch. Let's go back to `mybranch`, and run
+resolve to get the "upstream changes" back to your branch.
+
+------------
+git checkout mybranch
+git resolve HEAD master "Merge upstream changes."
+------------
- Merging external work
- ---------------------
+This outputs something like this (the actual commit object names
+would be different)
+
+ Updating from ae3a2da... to a80b4aa....
+ example | 1 +
+ hello | 1 +
+ 2 files changed, 2 insertions(+), 0 deletions(-)
+
+Because your branch did not contain anything more than what are
+already merged into the `master` branch, the resolve operation did
+not actually do a merge. Instead, it just updated the top of
+the tree of your branch to that of the `master` branch. This is
+often called 'fast forward' merge.
+
+You can run `gitk \--all` again to see how the commit ancestry
+looks like, or run `show-branch`, which tells you this.
+
+------------------------------------------------
+$ git show-branch master mybranch
+! [master] Merged "mybranch" changes.
+ * [mybranch] Merged "mybranch" changes.
+--
+++ [master] Merged "mybranch" changes.
+------------------------------------------------
+
+
+Merging external work
+---------------------
It's usually much more common that you merge with somebody else than
merging with your own branches, so it's worth pointing out that git
makes that very easy too, and in fact, it's not that different from
-doing a "git resolve". In fact, a remote merge ends up being nothing
+doing a `git resolve`. In fact, a remote merge ends up being nothing
more than "fetch the work from a remote repository into a temporary tag"
-followed by a "git resolve".
-
-It's such a common thing to do that it's called "git pull", and you can
+followed by a `git resolve`.
+
+Fetching from a remote repository is done by, unsurprisingly,
+`git fetch`:
+
+ git fetch <remote-repository>
+
+One of the following transports can be used to name the
+repository to download from:
+
+Rsync::
+ `rsync://remote.machine/path/to/repo.git/`
++
+Rsync transport is usable for both uploading and downloading,
+but is completely unaware of what git does, and can produce
+unexpected results when you download from the public repository
+while the repository owner is uploading into it via `rsync`
+transport. Most notably, it could update the files under
+`refs/` which holds the object name of the topmost commits
+before uploading the files in `objects/` -- the downloader would
+obtain head commit object name while that object itself is still
+not available in the repository. For this reason, it is
+considered deprecated.
+
+SSH::
+ `remote.machine:/path/to/repo.git/` or
++
+`ssh://remote.machine/path/to/repo.git/`
++
+This transport can be used for both uploading and downloading,
+and requires you to have a log-in privilege over `ssh` to the
+remote machine. It finds out the set of objects the other side
+lacks by exchanging the head commits both ends have and
+transfers (close to) minimum set of objects. It is by far the
+most efficient way to exchange git objects between repositories.
+
+Local directory::
+ `/path/to/repo.git/`
++
+This transport is the same as SSH transport but uses `sh` to run
+both ends on the local machine instead of running other end on
+the remote machine via `ssh`.
+
+git Native::
+ `git://remote.machine/path/to/repo.git/`
++
+This transport was designed for anonymous downloading. Like SSH
+transport, it finds out the set of objects the downstream side
+lacks and transfers (close to) minimum set of objects.
+
+HTTP(s)::
+ `http://remote.machine/path/to/repo.git/`
++
+HTTP and HTTPS transport are used only for downloading. They
+first obtain the topmost commit object name from the remote site
+by looking at `repo.git/info/refs` file, tries to obtain the
+commit object by downloading from `repo.git/objects/xx/xxx\...`
+using the object name of that commit object. Then it reads the
+commit object to find out its parent commits and the associate
+tree object; it repeats this process until it gets all the
+necessary objects. Because of this behaviour, they are
+sometimes also called 'commit walkers'.
++
+The 'commit walkers' are sometimes also called 'dumb
+transports', because they do not require any git aware smart
+server like git Native transport does. Any stock HTTP server
+would suffice.
++
+There are (confusingly enough) `git-ssh-fetch` and `git-ssh-upload`
+programs, which are 'commit walkers'; they outlived their
+usefulness when git Native and SSH transports were introduced,
+and not used by `git pull` or `git push` scripts.
+
+Once you fetch from the remote repository, you `resolve` that
+with your current branch.
+
+However -- it's such a common thing to `fetch` and then
+immediately `resolve`, that it's called `git pull`, and you can
simply do
git pull <remote-repository>
and optionally give a branch-name for the remote end as a second
argument.
-The "remote" repository can even be on the same machine. One of
-the following notations can be used to name the repository to
-pull from:
-
- Rsync URL
- rsync://remote.machine/path/to/repo.git/
-
- HTTP(s) URL
- http://remote.machine/path/to/repo.git/
-
- GIT URL
- git://remote.machine/path/to/repo.git/
- remote.machine:/path/to/repo.git/
-
- Local directory
- /path/to/repo.git/
-
-[ Side Note: currently, HTTP transport is slightly broken in
- that when the remote repository is "packed" they do not always
- work. But we have not talked about packing repository yet, so
- let's not worry too much about it for now. ]
-
-[ Digression: you could do without using any branches at all, by
- keeping as many local repositories as you would like to have
- branches, and merging between them with "git pull", just like
- you merge between branches. The advantage of this approach is
- that it lets you keep set of files for each "branch" checked
- out and you may find it easier to switch back and forth if you
- juggle multiple lines of development simultaneously. Of
- course, you will pay the price of more disk usage to hold
- multiple working trees, but disk space is cheap these days. ]
+[NOTE]
+You could do without using any branches at all, by
+keeping as many local repositories as you would like to have
+branches, and merging between them with `git pull`, just like
+you merge between branches. The advantage of this approach is
+that it lets you keep set of files for each `branch` checked
+out and you may find it easier to switch back and forth if you
+juggle multiple lines of development simultaneously. Of
+course, you will pay the price of more disk usage to hold
+multiple working trees, but disk space is cheap these days.
+
+[NOTE]
+You could even pull from your own repository by
+giving '.' as <remote-repository> parameter to `git pull`.
It is likely that you will be pulling from the same remote
-repository from time to time. As a short hand, you can store
-the remote repository URL in a file under .git/branches/
+repository from time to time. As a short hand, you can store
+the remote repository URL in a file under .git/remotes/
directory, like this:
- mkdir -p .git/branches
- echo rsync://kernel.org/pub/scm/git/git.git/ \
- >.git/branches/linus
+------------------------------------------------
+mkdir -p .git/remotes/
+cat >.git/remotes/linus <<\EOF
+URL: http://www.kernel.org/pub/scm/git/git.git/
+EOF
+------------------------------------------------
-and use the filenae to "git pull" instead of the full URL.
-The contents of a file under .git/branches can even be a prefix
+and use the filename to `git pull` instead of the full URL.
+The URL specified in such file can even be a prefix
of a full URL, like this:
- echo rsync://kernel.org/pub/.../jgarzik/
- >.git/branches/jgarzik
+------------------------------------------------
+cat >.git/remotes/jgarzik <<\EOF
+URL: http://www.kernel.org/pub/scm/linux/git/jgarzik/
+EOF
+------------------------------------------------
+
Examples.
- (1) git pull linus
- (2) git pull linus tag v0.99.1
- (3) git pull jgarzik/netdev-2.6.git/ e100
+. `git pull linus`
+. `git pull linus tag v0.99.1`
+. `git pull jgarzik/netdev-2.6.git/ e100`
the above are equivalent to:
- (1) git pull rsync://kernel.org/pub/scm/git/git.git/ HEAD
- (2) git pull rsync://kernel.org/pub/scm/git/git.git/ tag v0.99.1
- (3) git pull rsync://kernel.org/pub/.../jgarzik/netdev-2.6.git e100
+. `git pull http://www.kernel.org/pub/scm/git/git.git/ HEAD`
+. `git pull http://www.kernel.org/pub/scm/git/git.git/ tag v0.99.1`
+. `git pull http://www.kernel.org/pub/.../jgarzik/netdev-2.6.git e100`
- Publishing your work
- --------------------
+Publishing your work
+--------------------
So we can use somebody else's work from a remote repository; but
-how can _you_ prepare a repository to let other people pull from
+how can *you* prepare a repository to let other people pull from
it?
-Your do your real work in your working directory that has your
-primary repository hanging under it as its ".git" subdirectory.
-You _could_ make that repository accessible remotely and ask
+Your do your real work in your working tree that has your
+primary repository hanging under it as its `.git` subdirectory.
+You *could* make that repository accessible remotely and ask
people to pull from it, but in practice that is not the way
-things are usually done. A recommended way is to have a public
+things are usually done. A recommended way is to have a public
repository, make it reachable by other people, and when the
-changes you made in your primary working directory are in good
-shape, update the public repository from it. This is often
-called "pushing".
+changes you made in your primary working tree are in good shape,
+update the public repository from it. This is often called
+'pushing'.
-[ Side note: this public repository could further be mirrored,
- and that is how kernel.org git repositories are done. ]
+[NOTE]
+This public repository could further be mirrored, and that is
+how git repositories at `kernel.org` are managed.
Publishing the changes from your local (private) repository to
your remote (public) repository requires a write privilege on
-the remote machine. You need to have an SSH account there to
-run a single command, "git-receive-pack".
+the remote machine. You need to have an SSH account there to
+run a single command, `git-receive-pack`.
First, you need to create an empty repository on the remote
-machine that will house your public repository. This empty
+machine that will house your public repository. This empty
repository will be populated and be kept up-to-date by pushing
-into it later. Obviously, this repository creation needs to be
+into it later. Obviously, this repository creation needs to be
done only once.
-[ Digression: "git push" uses a pair of programs,
- "git-send-pack" on your local machine, and "git-receive-pack"
- on the remote machine. The communication between the two over
- the network internally uses an SSH connection. ]
+[NOTE]
+`git push` uses a pair of programs,
+`git-send-pack` on your local machine, and `git-receive-pack`
+on the remote machine. The communication between the two over
+the network internally uses an SSH connection.
-Your private repository's GIT directory is usually .git, but
+Your private repository's git directory is usually `.git`, but
your public repository is often named after the project name,
-i.e. "<project>.git". Let's create such a public repository for
-project "my-git". After logging into the remote machine, create
+i.e. `<project>.git`. Let's create such a public repository for
+project `my-git`. After logging into the remote machine, create
an empty directory:
- mkdir my-git.git
+------------
+mkdir my-git.git
+------------
-Then, make that directory into a GIT repository by running
-git-init-db, but this time, since it's name is not the usual
-".git", we do things slightly differently:
+Then, make that directory into a git repository by running
+`git init-db`, but this time, since its name is not the usual
+`.git`, we do things slightly differently:
- GIT_DIR=my-git.git git-init-db
+------------
+GIT_DIR=my-git.git git-init-db
+------------
Make sure this directory is available for others you want your
-changes to be pulled by via the transport of your choice. Also
-you need to make sure that you have the "git-receive-pack"
-program on the $PATH.
-
-[ Side note: many installations of sshd do not invoke your shell
- as the login shell when you directly run programs; what this
- means is that if your login shell is bash, only .bashrc is
- read and not .bash_profile. As a workaround, make sure
- .bashrc sets up $PATH so that you can run 'git-receive-pack'
- program. ]
+changes to be pulled by via the transport of your choice. Also
+you need to make sure that you have the `git-receive-pack`
+program on the `$PATH`.
+
+[NOTE]
+Many installations of sshd do not invoke your shell as the login
+shell when you directly run programs; what this means is that if
+your login shell is `bash`, only `.bashrc` is read and not
+`.bash_profile`. As a workaround, make sure `.bashrc` sets up
+`$PATH` so that you can run `git-receive-pack` program.
+
+[NOTE]
+If you plan to publish this repository to be accessed over http,
+you should do `chmod +x my-git.git/hooks/post-update` at this
+point. This makes sure that every time you push into this
+repository, `git-update-server-info` is run.
Your "public repository" is now ready to accept your changes.
-Come back to the machine you have your private repository. From
+Come back to the machine you have your private repository. From
there, run this command:
- git push <public-host>:/path/to/my-git.git master
+------------
+git push <public-host>:/path/to/my-git.git master
+------------
This synchronizes your public repository to match the named
-branch head (i.e. "master" in this case) and objects reachable
+branch head (i.e. `master` in this case) and objects reachable
from them in your current repository.
As a real example, this is how I update my public git
-repository. Kernel.org mirror network takes care of the
+repository. Kernel.org mirror network takes care of the
propagation to other publicly visible machines:
- git push master.kernel.org:/pub/scm/git/git.git/
-
-
-[ Digression: your GIT "public" repository people can pull from
- is different from a public CVS repository that lets read-write
- access to multiple developers. It is a copy of _your_ primary
- repository published for others to use, and you should not
- push into it from more than one repository (this means, not
- just disallowing other developers to push into it, but also
- you should push into it from a single repository of yours).
- Sharing the result of work done by multiple people are always
- done by pulling (i.e. fetching and merging) from public
- repositories of those people. Typically this is done by the
- "project lead" person, and the resulting repository is
- published as the public repository of the "project lead" for
- everybody to base further changes on. ]
+------------
+git push master.kernel.org:/pub/scm/git/git.git/
+------------
- Packing your repository
- -----------------------
+Packing your repository
+-----------------------
-Earlier, we saw that one file under .git/objects/??/ directory
-is stored for each git object you create. This representation
-is convenient and efficient to create atomically and safely, but
-not so to transport over the network. Since git objects are
+Earlier, we saw that one file under `.git/objects/??/` directory
+is stored for each git object you create. This representation
+is efficient to create atomically and safely, but
+not so convenient to transport over the network. Since git objects are
immutable once they are created, there is a way to optimize the
-storage by "packing them together". The command
+storage by "packing them together". The command
- git repack
+------------
+git repack
+------------
-will do it for you. If you followed the tutorial examples, you
-would have accumulated about 17 objects in .git/objects/??/
-directories by now. "git repack" tells you how many objects it
-packed, and stores the packed file in .git/objects/pack
+will do it for you. If you followed the tutorial examples, you
+would have accumulated about 17 objects in `.git/objects/??/`
+directories by now. `git repack` tells you how many objects it
+packed, and stores the packed file in `.git/objects/pack`
directory.
-[ Side Note: you will see two files, pack-*.pack and pack-*.idx,
- in .git/objects/pack directory. They are closely related to
- each other, and if you ever copy them by hand to a different
- repository for whatever reason, you should make sure you copy
- them together. The former holds all the data from the objects
- in the pack, and the latter holds the index for random
- access. ]
+[NOTE]
+You will see two files, `pack-\*.pack` and `pack-\*.idx`,
+in `.git/objects/pack` directory. They are closely related to
+each other, and if you ever copy them by hand to a different
+repository for whatever reason, you should make sure you copy
+them together. The former holds all the data from the objects
+in the pack, and the latter holds the index for random
+access.
-If you are paranoid, running "git-verify-pack" command would
+If you are paranoid, running `git-verify-pack` command would
detect if you have a corrupt pack, but do not worry too much.
Our programs are always perfect ;-).
Once you have packed objects, you do not need to leave the
unpacked objects that are contained in the pack file anymore.
- git prune-packed
+------------
+git prune-packed
+------------
would remove them for you.
-You can try running "find .git/objects -type f" before and after
-you run "git prune-packed" if you are curious.
-
-[ Side Note: as we already mentioned, "git pull" is broken for
- some transports dealing with packed repositories right now, so
- do not run "git prune-packed" if you plan to give "git pull"
- access via HTTP transport for now. ]
-
-If you run "git repack" again at this point, it will say
-"Nothing to pack". Once you continue your development and
-accumulate the changes, running "git repack" again will create a
+You can try running `find .git/objects -type f` before and after
+you run `git prune-packed` if you are curious. Also `git
+count-objects` would tell you how many unpacked objects are in
+your repository and how much space they are consuming.
+
+[NOTE]
+`git pull` is slightly cumbersome for HTTP transport, as a
+packed repository may contain relatively few objects in a
+relatively large pack. If you expect many HTTP pulls from your
+public repository you might want to repack & prune often, or
+never.
+
+If you run `git repack` again at this point, it will say
+"Nothing to pack". Once you continue your development and
+accumulate the changes, running `git repack` again will create a
new pack, that contains objects created since you packed your
-archive the last time. We recommend that you pack your project
+repository the last time. We recommend that you pack your project
soon after the initial import (unless you are starting your
-project from scratch), and then run "git repack" every once in a
+project from scratch), and then run `git repack` every once in a
while, depending on how active your project is.
-When a repository is synchronized via "git push" and "git pull",
-objects packed in the source repository is usually stored
+When a repository is synchronized via `git push` and `git pull`
+objects packed in the source repository are usually stored
unpacked in the destination, unless rsync transport is used.
+While this allows you to use different packing strategies on
+both ends, it also means you may need to repack both
+repositories every once in a while.
- Working with Others
- -------------------
+Working with Others
+-------------------
Although git is a truly distributed system, it is often
convenient to organize your project with an informal hierarchy
-of developers. Linux kernel development is run this way. There
+of developers. Linux kernel development is run this way. There
is a nice illustration (page 17, "Merges to Mainline") in Randy
-Dunlap's presentation (http://tinyurl.com/a2jdg).
+Dunlap's presentation (`http://tinyurl.com/a2jdg`).
-It should be stressed that this hierarchy is purely "informal".
+It should be stressed that this hierarchy is purely *informal*.
There is nothing fundamental in git that enforces the "chain of
-patch flow" this hierarchy implies. You do not have to pull
+patch flow" this hierarchy implies. You do not have to pull
from only one remote repository.
-
A recommended workflow for a "project lead" goes like this:
- (1) Prepare your primary repository on your local machine. Your
- work is done there.
-
- (2) Prepare a public repository accessible to others.
+1. Prepare your primary repository on your local machine. Your
+ work is done there.
- (3) Push into the public repository from your primary
- repository.
+2. Prepare a public repository accessible to others.
++
+If other people are pulling from your repository over dumb
+transport protocols, you need to keep this repository 'dumb
+transport friendly'. After `git init-db`,
+`$GIT_DIR/hooks/post-update` copied from the standard templates
+would contain a call to `git-update-server-info` but the
+`post-update` hook itself is disabled by default -- enable it
+with `chmod +x post-update`.
- (4) "git repack" the public repository. This establishes a big
- pack that contains the initial set of objects as the
- baseline, and possibly "git prune-packed" if the transport
- used for pulling from your repository supports packed
- repositories.
+3. Push into the public repository from your primary
+ repository.
- (5) Keep working in your primary repository. Your changes
- include modifications of your own, patches you receive via
- e-mails, and merges resulting from pulling the "public"
- repositories of your "subsystem maintainers".
+4. `git repack` the public repository. This establishes a big
+ pack that contains the initial set of objects as the
+ baseline, and possibly `git prune` if the transport
+ used for pulling from your repository supports packed
+ repositories.
- You can repack this private repository whenever you feel
- like.
+5. Keep working in your primary repository. Your changes
+ include modifications of your own, patches you receive via
+ e-mails, and merges resulting from pulling the "public"
+ repositories of your "subsystem maintainers".
++
+You can repack this private repository whenever you feel like.
- (6) Push your changes to the public repository, and announce it
- to the public.
+6. Push your changes to the public repository, and announce it
+ to the public.
- (7) Every once in a while, "git repack" the public repository.
- Go back to step (5) and continue working.
+7. Every once in a while, "git repack" the public repository.
+ Go back to step 5. and continue working.
-A recommended work cycle for a "subsystem maintainer" that works
-on that project and has own "public repository" goes like this:
+A recommended work cycle for a "subsystem maintainer" who works
+on that project and has an own "public repository" goes like this:
- (1) Prepare your work repository, by "git clone" the public
- repository of the "project lead". The URL used for the
- initial cloning is stored in .git/branches/origin.
+1. Prepare your work repository, by `git clone` the public
+ repository of the "project lead". The URL used for the
+ initial cloning is stored in `.git/remotes/origin`.
- (2) Prepare a public repository accessible to others.
+2. Prepare a public repository accessible to others, just like
+ the "project lead" person does.
- (3) Copy over the packed files from "project lead" public
- repository to your public repository by hand; this part is
- currently not automated.
+3. Copy over the packed files from "project lead" public
+ repository to your public repository.
- (4) Push into the public repository from your primary
- repository. Run "git repack", and possibly "git
- prune-packed" if the transport used for pulling from your
- repository supports packed repositories.
+4. Push into the public repository from your primary
+ repository. Run `git repack`, and possibly `git prune` if the
+ transport used for pulling from your repository supports
+ packed repositories.
- (5) Keep working in your primary repository. Your changes
- include modifications of your own, patches you receive via
- e-mails, and merges resulting from pulling the "public"
- repositories of your "project lead" and possibly your
- "sub-subsystem maintainers".
+5. Keep working in your primary repository. Your changes
+ include modifications of your own, patches you receive via
+ e-mails, and merges resulting from pulling the "public"
+ repositories of your "project lead" and possibly your
+ "sub-subsystem maintainers".
++
+You can repack this private repository whenever you feel
+like.
- You can repack this private repository whenever you feel
- like.
+6. Push your changes to your public repository, and ask your
+ "project lead" and possibly your "sub-subsystem
+ maintainers" to pull from it.
- (6) Push your changes to your public repository, and ask your
- "project lead" and possibly your "sub-subsystem
- maintainers" to pull from it.
-
- (7) Every once in a while, "git repack" the public repository.
- Go back to step (5) and continue working.
+7. Every once in a while, `git repack` the public repository.
+ Go back to step 5. and continue working.
A recommended work cycle for an "individual developer" who does
-not have a "public" repository is somewhat different. It goes
+not have a "public" repository is somewhat different. It goes
like this:
- (1) Prepare your work repository, by "git clone" the public
- repository of the "project lead" (or a "subsystem
- maintainer", if you work on a subsystem). The URL used for
- the initial cloning is stored in .git/branches/origin.
+1. Prepare your work repository, by `git clone` the public
+ repository of the "project lead" (or a "subsystem
+ maintainer", if you work on a subsystem). The URL used for
+ the initial cloning is stored in `.git/remotes/origin`.
+
+2. Do your work in your repository on 'master' branch.
+
+3. Run `git fetch origin` from the public repository of your
+ upstream every once in a while. This does only the first
+ half of `git pull` but does not merge. The head of the
+ public repository is stored in `.git/refs/heads/origin`.
+
+4. Use `git cherry origin` to see which ones of your patches
+ were accepted, and/or use `git rebase origin` to port your
+ unmerged changes forward to the updated upstream.
+
+5. Use `git format-patch origin` to prepare patches for e-mail
+ submission to your upstream and send it out. Go back to
+ step 2. and continue.
+
+
+Working with Others, Shared Repository Style
+--------------------------------------------
+
+If you are coming from CVS background, the style of cooperation
+suggested in the previous section may be new to you. You do not
+have to worry. git supports "shared public repository" style of
+cooperation you are probably more familiar with as well.
+
+For this, set up a public repository on a machine that is
+reachable via SSH by people with "commit privileges". Put the
+committers in the same user group and make the repository
+writable by that group.
+
+You, as an individual committer, then:
+
+- First clone the shared repository to a local repository:
+------------------------------------------------
+$ git clone repo.shared.xz:/pub/scm/project.git/ my-project
+$ cd my-project
+$ hack away
+------------------------------------------------
+
+- Merge the work others might have done while you were hacking
+ away:
+------------------------------------------------
+$ git pull origin
+$ test the merge result
+------------------------------------------------
+[NOTE]
+================================
+The first `git clone` would have placed the following in
+`my-project/.git/remotes/origin` file, and that's why this and
+the next step work.
+------------
+URL: repo.shared.xz:/pub/scm/project.git/ my-project
+Pull: master:origin
+------------
+================================
+
+- push your work as the new head of the shared
+ repository.
+------------------------------------------------
+$ git push origin master
+------------------------------------------------
+If somebody else pushed into the same shared repository while
+you were working locally, `git push` in the last step would
+complain, telling you that the remote `master` head does not
+fast forward. You need to pull and merge those other changes
+back before you push your work when it happens.
+
+
+Bundling your work together
+---------------------------
+
+It is likely that you will be working on more than one thing at
+a time. It is easy to use those more-or-less independent tasks
+using branches with git.
+
+We have already seen how branches work in a previous example,
+with "fun and work" example using two branches. The idea is the
+same if there are more than two branches. Let's say you started
+out from "master" head, and have some new code in the "master"
+branch, and two independent fixes in the "commit-fix" and
+"diff-fix" branches:
- (2) Do your work there. Make commits.
+------------
+$ git show-branch
+! [commit-fix] Fix commit message normalization.
+ ! [diff-fix] Fix rename detection.
+ * [master] Release candidate #1
+---
+ + [diff-fix] Fix rename detection.
+ + [diff-fix~1] Better common substring algorithm.
++ [commit-fix] Fix commit message normalization.
+ + [master] Release candidate #1
++++ [diff-fix~2] Pretty-print messages.
+------------
- (3) Run "git fetch origin" from the public repository of your
- upstream every once in a while. This does only the first
- half of "git pull" but does not merge. The head of the
- public repository is stored in .git/refs/heads/origin.
+Both fixes are tested well, and at this point, you want to merge
+in both of them. You could merge in 'diff-fix' first and then
+'commit-fix' next, like this:
- (4) Use "git cherry origin" to see which ones of your patches
- were accepted, and/or use "git rebase origin" to port your
- unmerged changes forward to the updated upstream.
+------------
+$ git resolve master diff-fix 'Merge fix in diff-fix'
+$ git resolve master commit-fix 'Merge fix in commit-fix'
+------------
+
+Which would result in:
+
+------------
+$ git show-branch
+! [commit-fix] Fix commit message normalization.
+ ! [diff-fix] Fix rename detection.
+ * [master] Merge fix in commit-fix
+---
+ + [master] Merge fix in commit-fix
++ + [commit-fix] Fix commit message normalization.
+ + [master~1] Merge fix in diff-fix
+ ++ [diff-fix] Fix rename detection.
+ ++ [diff-fix~1] Better common substring algorithm.
+ + [master~2] Release candidate #1
++++ [master~3] Pretty-print messages.
+------------
+
+However, there is no particular reason to merge in one branch
+first and the other next, when what you have are a set of truly
+independent changes (if the order mattered, then they are not
+independent by definition). You could instead merge those two
+branches into the current branch at once. First let's undo what
+we just did and start over. We would want to get the master
+branch before these two merges by resetting it to 'master~2':
- (5) Use "git format-patch origin" to prepare patches for e-mail
- submission to your upstream and send it out. Go back to
- step (2) and continue.
+------------
+$ git reset --hard master~2
+------------
+
+You can make sure 'git show-branch' matches the state before
+those two 'git resolve' you just did. Then, instead of running
+two 'git resolve' commands in a row, you would pull these two
+branch heads (this is known as 'making an Octopus'):
+
+------------
+$ git pull . commit-fix diff-fix
+$ git show-branch
+! [commit-fix] Fix commit message normalization.
+ ! [diff-fix] Fix rename detection.
+ * [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
+---
+ + [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
++ + [commit-fix] Fix commit message normalization.
+ ++ [diff-fix] Fix rename detection.
+ ++ [diff-fix~1] Better common substring algorithm.
+ + [master~1] Release candidate #1
++++ [master~2] Pretty-print messages.
+------------
+Note that you should not do Octopus because you can. An octopus
+is a valid thing to do and often makes it easier to view the
+commit history if you are pulling more than two independent
+changes at the same time. However, if you have merge conflicts
+with any of the branches you are merging in and need to hand
+resolve, that is an indication that the development happened in
+those branches were not independent after all, and you should
+merge two at a time, documenting how you resolved the conflicts,
+and the reason why you preferred changes made in one side over
+the other. Otherwise it would make the project history harder
+to follow, not easier.
[ to be continued.. cvsimports ]