print $state->{CVSROOT} . "/$state->{module}/$filename\n";
# this is an "entries" line
- my $kopts = kopts_from_path($filename);
+ my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
$log->debug("/$filepart/1.$meta->{revision}//$kopts/");
print "/$filepart/1.$meta->{revision}//$kopts/\n";
# permissions
print "Checked-in $dirpart\n";
print "$filename\n";
- my $kopts = kopts_from_path($filename);
+ my $kopts = kopts_from_path($filename,"file",
+ $state->{entries}{$filename}{modified_filename});
print "/$filepart/0//$kopts/\n";
my $requestedKopts = $state->{opt}{k};
print "Checked-in $dirpart\n";
print "$filename\n";
- my $kopts = kopts_from_path($filename);
+ my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
print "/$filepart/-1.$wrev//$kopts/\n";
$rmcount++;
print $state->{CVSROOT} . "/$module/" . ( defined ( $git->{dir} ) and $git->{dir} ne "./" ? $git->{dir} . "/" : "" ) . "$git->{name}\n";
# this is an "entries" line
- my $kopts = kopts_from_path($fullName);
+ my $kopts = kopts_from_path($fullName,"sha1",$git->{filehash});
print "/$git->{name}/1.$git->{revision}//$kopts/\n";
# permissions
print "u=$git->{mode},g=$git->{mode},o=$git->{mode}\n";
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
# this is an "entries" line
- my $kopts = kopts_from_path($filename);
+ my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
$log->debug("/$filepart/1.$meta->{revision}//$kopts/");
print "/$filepart/1.$meta->{revision}//$kopts/\n";
print "Merged $dirpart\n";
$log->debug($state->{CVSROOT} . "/$state->{module}/$filename");
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
- my $kopts = kopts_from_path("$dirpart/$filepart");
+ my $kopts = kopts_from_path("$dirpart/$filepart",
+ "file",$mergedFile);
$log->debug("/$filepart/1.$meta->{revision}//$kopts/");
print "/$filepart/1.$meta->{revision}//$kopts/\n";
}
{
print "Merged $dirpart\n";
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
- my $kopts = kopts_from_path("$dirpart/$filepart");
+ my $kopts = kopts_from_path("$dirpart/$filepart",
+ "file",$mergedFile);
print "/$filepart/1.$meta->{revision}/+/$kopts/\n";
}
}
}
print "Checked-in $dirpart\n";
print "$filename\n";
- my $kopts = kopts_from_path($filename);
+ my $kopts = kopts_from_path($filename,"sha1",$meta->{filehash});
print "/$filepart/1.$meta->{revision}//$kopts/\n";
}
}
# file should get -kb.
sub kopts_from_path
{
- my ($path) = @_;
+ my ($path, $srcType, $name) = @_;
if ( defined ( $cfg->{gitcvs}{usecrlfattr} ) and
$cfg->{gitcvs}{usecrlfattr} =~ /\s*(1|true|yes)\s*$/i )
}
}
- unless ( defined ( $cfg->{gitcvs}{allbinary} ) and $cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i )
+ if ( defined ( $cfg->{gitcvs}{allbinary} ) )
{
- # Return "" to give no special treatment to any path
- return "";
- } else {
- # Alternatively, to have all files treated as if they are binary (which
- # is more like git itself), always return the "-kb" option
- return "-kb";
+ if( ($cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i) )
+ {
+ return "-kb";
+ }
+ elsif( ($cfg->{gitcvs}{allbinary} =~ /^\s*guess\s*$/i) )
+ {
+ if( $srcType eq "sha1Or-k" &&
+ !defined($name) )
+ {
+ my ($ret)=$state->{entries}{$path}{options};
+ if( !defined($ret) )
+ {
+ $ret=$state->{opt}{k};
+ if(defined($ret))
+ {
+ $ret="-k$ret";
+ }
+ else
+ {
+ $ret="";
+ }
+ }
+ if( ! ($ret=~/^(|-kb|-kkv|-kkvl|-kk|-ko|-kv)$/) )
+ {
+ print "E Bad -k option\n";
+ $log->warn("Bad -k option: $ret");
+ die "Error: Bad -k option: $ret\n";
+ }
+
+ return $ret;
+ }
+ else
+ {
+ if( is_binary($srcType,$name) )
+ {
+ $log->debug("... as binary");
+ return "-kb";
+ }
+ else
+ {
+ $log->debug("... as text");
+ }
+ }
+ }
}
+ # Return "" to give no special treatment to any path
+ return "";
}
sub check_attr
}
}
+# This should have the same heuristics as convert.c:is_binary() and related.
+# Note that the bare CR test is done by callers in convert.c.
+sub is_binary
+{
+ my ($srcType,$name) = @_;
+ $log->debug("is_binary($srcType,$name)");
+
+ # Minimize amount of interpreted code run in the inner per-character
+ # loop for large files, by totalling each character value and
+ # then analyzing the totals.
+ my @counts;
+ my $i;
+ for($i=0;$i<256;$i++)
+ {
+ $counts[$i]=0;
+ }
+
+ my $fh = open_blob_or_die($srcType,$name);
+ my $line;
+ while( defined($line=<$fh>) )
+ {
+ # Any '\0' and bare CR are considered binary.
+ if( $line =~ /\0|(\r[^\n])/ )
+ {
+ close($fh);
+ return 1;
+ }
+
+ # Count up each character in the line:
+ my $len=length($line);
+ for($i=0;$i<$len;$i++)
+ {
+ $counts[ord(substr($line,$i,1))]++;
+ }
+ }
+ close $fh;
+
+ # Don't count CR and LF as either printable/nonprintable
+ $counts[ord("\n")]=0;
+ $counts[ord("\r")]=0;
+
+ # Categorize individual character count into printable and nonprintable:
+ my $printable=0;
+ my $nonprintable=0;
+ for($i=0;$i<256;$i++)
+ {
+ if( $i < 32 &&
+ $i != ord("\b") &&
+ $i != ord("\t") &&
+ $i != 033 && # ESC
+ $i != 014 ) # FF
+ {
+ $nonprintable+=$counts[$i];
+ }
+ elsif( $i==127 ) # DEL
+ {
+ $nonprintable+=$counts[$i];
+ }
+ else
+ {
+ $printable+=$counts[$i];
+ }
+ }
+
+ return ($printable >> 7) < $nonprintable;
+}
+
+# Returns open file handle. Possible invocations:
+# - open_blob_or_die("file",$filename);
+# - open_blob_or_die("sha1",$filehash);
+sub open_blob_or_die
+{
+ my ($srcType,$name) = @_;
+ my ($fh);
+ if( $srcType eq "file" )
+ {
+ if( !open $fh,"<",$name )
+ {
+ $log->warn("Unable to open file $name: $!");
+ die "Unable to open file $name: $!\n";
+ }
+ }
+ elsif( $srcType eq "sha1" || $srcType eq "sha1Or-k" )
+ {
+ unless ( defined ( $name ) and $name =~ /^[a-zA-Z0-9]{40}$/ )
+ {
+ $log->warn("Need filehash");
+ die "Need filehash\n";
+ }
+
+ my $type = `git cat-file -t $name`;
+ chomp $type;
+
+ unless ( defined ( $type ) and $type eq "blob" )
+ {
+ $log->warn("Invalid type '$type' for '$name'");
+ die ( "Invalid type '$type' (expected 'blob')" )
+ }
+
+ my $size = `git cat-file -s $name`;
+ chomp $size;
+
+ $log->debug("open_blob_or_die($name) size=$size, type=$type");
+
+ unless( open $fh, '-|', "git", "cat-file", "blob", $name )
+ {
+ $log->warn("Unable to open sha1 $name");
+ die "Unable to open sha1 $name\n";
+ }
+ }
+ else
+ {
+ $log->warn("Unknown type of blob source: $srcType");
+ die "Unknown type of blob source: $srcType\n";
+ }
+ return $fh;
+}
+
# Generate a CVS author name from Git author information, by taking
# the first eight characters of the user part of the email address.
sub cvs_author