# You should have received a copy of the GNU General Public License
# along with this program. If not, see http://www.gnu.org/licenses/ .
-# if --tee was passed, write the output not only to the terminal, but
-# additionally to the file test-results/$BASENAME.out, too.
-case "$GIT_TEST_TEE_STARTED, $* " in
-done,*)
- # do not redirect again
- ;;
-*' --tee '*|*' --va'*)
- mkdir -p test-results
- BASE=test-results/$(basename "$0" .sh)
- (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
- echo $? > $BASE.exit) | tee $BASE.out
- test "$(cat $BASE.exit)" = 0
- exit
- ;;
-esac
-
# Keep the original TERM for say_color
ORIGINAL_TERM=$TERM
fi
GIT_BUILD_DIR="$TEST_DIRECTORY"/..
+################################################################
+# It appears that people try to run tests without building...
+"$GIT_BUILD_DIR/git" >/dev/null
+if test $? != 1
+then
+ echo >&2 'error: you do not seem to have built git yet.'
+ exit 1
+fi
+
. "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS
export PERL_PATH SHELL_PATH
+# if --tee was passed, write the output not only to the terminal, but
+# additionally to the file test-results/$BASENAME.out, too.
+case "$GIT_TEST_TEE_STARTED, $* " in
+done,*)
+ # do not redirect again
+ ;;
+*' --tee '*|*' --va'*)
+ mkdir -p test-results
+ BASE=test-results/$(basename "$0" .sh)
+ (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1;
+ echo $? > $BASE.exit) | tee $BASE.out
+ test "$(cat $BASE.exit)" = 0
+ exit
+ ;;
+esac
+
# For repeatability, reset the environment to known value.
LANG=C
LC_ALL=C
export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME
export EDITOR
+# Add libc MALLOC and MALLOC_PERTURB test
+# only if we are not executing the test with valgrind
+if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
+ test -n "$TEST_NO_MALLOC_CHECK"
+then
+ setup_malloc_check () {
+ : nothing
+ }
+ teardown_malloc_check () {
+ : nothing
+ }
+else
+ setup_malloc_check () {
+ MALLOC_CHECK_=3 MALLOC_PERTURB_=165
+ export MALLOC_CHECK_ MALLOC_PERTURB_
+ }
+ teardown_malloc_check () {
+ unset MALLOC_CHECK_ MALLOC_PERTURB_
+ }
+fi
+
# Protect ourselves from common misconfiguration to export
# CDPATH into the environment
unset CDPATH
unset GREP_OPTIONS
case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in
- 1|2|true)
- echo "* warning: Some tests will not work if GIT_TRACE" \
- "is set as to trace on STDERR ! *"
- echo "* warning: Please set GIT_TRACE to something" \
- "other than 1, 2 or true ! *"
- ;;
+1|2|true)
+ echo "* warning: Some tests will not work if GIT_TRACE" \
+ "is set as to trace on STDERR ! *"
+ echo "* warning: Please set GIT_TRACE to something" \
+ "other than 1, 2 or true ! *"
+ ;;
esac
# Convenience
esac
done
-if test -n "$color"; then
+if test -n "$color"
+then
say_color () {
(
TERM=$ORIGINAL_TERM
export TERM
case "$1" in
- error) tput bold; tput setaf 1;; # bold red
- skip) tput bold; tput setaf 2;; # bold green
- pass) tput setaf 2;; # green
- info) tput setaf 3;; # brown
- *) test -n "$quiet" && return;;
+ error)
+ tput bold; tput setaf 1;; # bold red
+ skip)
+ tput bold; tput setaf 2;; # bold green
+ pass)
+ tput setaf 2;; # green
+ info)
+ tput setaf 3;; # brown
+ *)
+ test -n "$quiet" && return;;
esac
shift
printf "%s" "$*"
say_color() {
test -z "$1" && test -n "$quiet" && return
shift
- echo "$*"
+ printf "%s\n" "$*"
}
fi
if test -z "$immediate" || test $eval_ret = 0 || test -n "$expecting_failure"
then
+ setup_malloc_check
test_eval_ "$test_cleanup"
+ teardown_malloc_check
fi
- if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then
+ if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"
+ then
echo ""
fi
return "$eval_ret"
test_done () {
GIT_EXIT_OK=t
- if test -z "$HARNESS_ACTIVE"; then
+ if test -z "$HARNESS_ACTIVE"
+ then
test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results"
mkdir -p "$test_results_dir"
test_results_path="$test_results_dir/${0%.sh}-$$.counts"
case "$test_failure" in
0)
# Maybe print SKIP message
+ if test -n "$skip_all" && test $test_count -gt 0
+ then
+ error "Can't use skip_all after running some tests"
+ fi
[ -z "$skip_all" ] || skip_all=" # SKIP $skip_all"
- if test $test_external_has_tap -eq 0; then
- say_color pass "# passed all $msg"
+ if test $test_external_has_tap -eq 0
+ then
+ if test $test_count -gt 0
+ then
+ say_color pass "# passed all $msg"
+ fi
say "1..$test_count$skip_all"
fi
exit 0 ;;
*)
- if test $test_external_has_tap -eq 0; then
+ if test $test_external_has_tap -eq 0
+ then
say_color error "# failed $test_failure among $msg"
say "1..$test_count"
fi
PATH=$GIT_VALGRIND/bin:$PATH
GIT_EXEC_PATH=$GIT_VALGRIND/bin
export GIT_VALGRIND
-elif test -n "$GIT_TEST_INSTALLED" ; then
+elif test -n "$GIT_TEST_INSTALLED"
+then
GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) ||
error "Cannot run git from $GIT_TEST_INSTALLED."
PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH
GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
else # normal case, use ../bin-wrappers only unless $with_dashes:
git_bin_dir="$GIT_BUILD_DIR/bin-wrappers"
- if ! test -x "$git_bin_dir/git" ; then
- if test -z "$with_dashes" ; then
+ if ! test -x "$git_bin_dir/git"
+ then
+ if test -z "$with_dashes"
+ then
say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH"
fi
with_dashes=t
fi
PATH="$git_bin_dir:$PATH"
GIT_EXEC_PATH=$GIT_BUILD_DIR
- if test -n "$with_dashes" ; then
+ if test -n "$with_dashes"
+ then
PATH="$GIT_BUILD_DIR:$PATH"
fi
fi
}
fi
-if ! test -x "$GIT_BUILD_DIR"/test-chmtime; then
+if ! test -x "$GIT_BUILD_DIR"/test-chmtime
+then
echo >&2 'You need to build test-chmtime:'
echo >&2 'Run "make test-chmtime" in the source (toplevel) directory'
exit 1
HOME="$TRASH_DIRECTORY"
export HOME
-if test -z "$TEST_NO_CREATE_REPO"; then
+if test -z "$TEST_NO_CREATE_REPO"
+then
test_create_repo "$test"
else
mkdir -p "$test"