SYNOPSIS
--------
-$GIT_DIR/info/attributes, gitattributes
+$GIT_DIR/info/attributes, .gitattributes
DESCRIPTION
When deciding what attributes are assigned to a path, git
consults `$GIT_DIR/info/attributes` file (which has the highest
precedence), `.gitattributes` file in the same directory as the
-path in question, and its parent directories (the further the
-directory that contains `.gitattributes` is from the path in
-question, the lower its precedence).
+path in question, and its parent directories up to the toplevel of the
+work tree (the further the directory that contains `.gitattributes`
+is from the path in question, the lower its precedence).
If you wish to affect only a single repository (i.e., to assign
attributes to files that are particular to one user's workflow), then
These attributes affect how the contents stored in the
repository are copied to the working tree files when commands
-such as `git checkout` and `git merge` run. They also affect how
+such as 'git-checkout' and 'git-merge' run. They also affect how
git stores the contents you prepare in the working tree in the
-repository upon `git add` and `git commit`.
+repository upon 'git-add' and 'git-commit'.
`crlf`
^^^^^^
Unset::
- Unsetting the `crlf` attribute on a path is meant to
- mark the path as a "binary" file. The path never goes
- through line endings conversion upon checkin/checkout.
+ Unsetting the `crlf` attribute on a path tells git not to
+ attempt any end-of-line conversion upon checkin or checkout.
Unspecified::
converted to LF upon checkin, but there is no conversion done
upon checkout.
+If `core.safecrlf` is set to "true" or "warn", git verifies if
+the conversion is reversible for the current setting of
+`core.autocrlf`. For "true", git rejects irreversible
+conversions; for "warn", git only prints a warning but accepts
+an irreversible conversion. The safety triggers to prevent such
+a conversion done to the files in the work tree, but there are a
+few exceptions. Even though...
+
+- 'git-add' itself does not touch the files in the work tree, the
+ next checkout would, so the safety triggers;
+
+- 'git-apply' to update a text file with a patch does touch the files
+ in the work tree, but the operation is about text files and CRLF
+ conversion is about fixing the line ending inconsistencies, so the
+ safety does not trigger;
+
+- 'git-diff' itself does not touch the files in the work tree, it is
+ often run to inspect the changes you intend to next 'git-add'. To
+ catch potential problems early, safety triggers.
+
`ident`
^^^^^^^
-When the attribute `ident` is set to a path, git replaces
-`$Id$` in the blob object with `$Id:`, followed by
+When the attribute `ident` is set for a path, git replaces
+`$Id$` in the blob object with `$Id:`, followed by the
40-character hexadecimal blob object name, followed by a dollar
sign `$` upon checkout. Any byte sequence that begins with
`$Id:` and ends with `$` in the worktree file is replaced
Generating diff text
~~~~~~~~~~~~~~~~~~~~
-The attribute `diff` affects if `git diff` generates textual
+`diff`
+^^^^^^
+
+The attribute `diff` affects if 'git-diff' generates textual
patch for the path or just says `Binary files differ`. It also
can affect what line is shown on the hunk header `@@ -k,l +n,m @@`
line.
attribute set to `jcdiff`, it calls the command you specified
with the above configuration, i.e. `j-c-diff`, with 7
parameters, just like `GIT_EXTERNAL_DIFF` program is called.
-See linkgit:git[7] for details.
+See linkgit:git[1] for details.
Defining a custom hunk-header
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Each group of changes (called "hunk") in the textual diff output
+Each group of changes (called a "hunk") in the textual diff output
is prefixed with a line of the form:
@@ -k,l +n,m @@ TEXT
-The text is called 'hunk header', and by default a line that
-begins with an alphabet, an underscore or a dollar sign is used,
-which matches what GNU `diff -p` output uses. This default
-selection however is not suited for some contents, and you can
-use customized pattern to make a selection.
+This is called a 'hunk header'. The "TEXT" portion is by default a line
+that begins with an alphabet, an underscore or a dollar sign; this
+matches what GNU 'diff -p' output uses. This default selection however
+is not suited for some contents, and you can use a customized pattern
+to make a selection.
-First in .gitattributes, you would assign the `diff` attribute
+First, in .gitattributes, you would assign the `diff` attribute
for paths.
------------------------
*.tex diff=tex
------------------------
-Then, you would define "diff.tex.funcname" configuration to
+Then, you would define a "diff.tex.xfuncname" configuration to
specify a regular expression that matches a line that you would
-want to appear as the hunk header, like this:
+want to appear as the hunk header "TEXT", like this:
------------------------
[diff "tex"]
- funcname = "^\\(\\\\\\(sub\\)*section{.*\\)$"
+ xfuncname = "^(\\\\(sub)*section\\{.*)$"
------------------------
Note. A single level of backslashes are eaten by the
There are a few built-in patterns to make this easier, and `tex`
is one of them, so you do not have to write the above in your
configuration file (you still need to enable this with the
-attribute mechanism, via `.gitattributes`). Another built-in
-pattern is defined for `java` that defines a pattern suitable
-for program text in Java language.
+attribute mechanism, via `.gitattributes`). The following built in
+patterns are available:
+
+- `bibtex` suitable for files with BibTeX coded references.
+
+- `java` suitable for source code in the Java language.
+
+- `pascal` suitable for source code in the Pascal/Delphi language.
+
+- `ruby` suitable for source code in the Ruby language.
+
+- `tex` suitable for source code for LaTeX documents.
Performing a three-way merge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+`merge`
+^^^^^^^
+
The attribute `merge` affects how three versions of a file is
merged when a file-level merge is necessary during `git merge`,
and other programs such as `git revert` and `git cherry-pick`.
Set::
Built-in 3-way merge driver is used to merge the
- contents in a way similar to `merge` command of `RCS`
+ contents in a way similar to 'merge' command of `RCS`
suite. This is suitable for ordinary text files.
Unset::
^^^^^^^^^^^^
The `core.whitespace` configuration variable allows you to define what
-`diff` and `apply` should consider whitespace errors for all paths in
+'diff' and 'apply' should consider whitespace errors for all paths in
the project (See linkgit:git-config[1]). This attribute gives you finer
control per path.
variable.
+Creating an archive
+~~~~~~~~~~~~~~~~~~~
+
+`export-ignore`
+^^^^^^^^^^^^^^^
+
+Files and directories with the attribute `export-ignore` won't be added to
+archive files.
+
+`export-subst`
+^^^^^^^^^^^^^^
+
+If the attribute `export-subst` is set for a file then git will expand
+several placeholders when adding this file to an archive. The
+expansion depends on the availability of a commit ID, i.e., if
+linkgit:git-archive[1] has been given a tree instead of a commit or a
+tag then no replacement will be done. The placeholders are the same
+as those for the option `--pretty=format:` of linkgit:git-log[1],
+except that they need to be wrapped like this: `$Format:PLACEHOLDERS$`
+in the file. E.g. the string `$Format:%H$` will be replaced by the
+commit hash.
+
+
+USING ATTRIBUTE MACROS
+----------------------
+
+You do not want any end-of-line conversions applied to, nor textual diffs
+produced for, any binary file you track. You would need to specify e.g.
+
+------------
+*.jpg -crlf -diff
+------------
+
+but that may become cumbersome, when you have many attributes. Using
+attribute macros, you can specify groups of attributes set or unset at
+the same time. The system knows a built-in attribute macro, `binary`:
+
+------------
+*.jpg binary
+------------
+
+which is equivalent to the above. Note that the attribute macros can only
+be "Set" (see the above example that sets "binary" macro as if it were an
+ordinary attribute --- setting it in turn unsets "crlf" and "diff").
+
+
+DEFINING ATTRIBUTE MACROS
+-------------------------
+
+Custom attribute macros can be defined only in the `.gitattributes` file
+at the toplevel (i.e. not in any subdirectory). The built-in attribute
+macro "binary" is equivalent to:
+
+------------
+[attr]binary -diff -crlf
+------------
+
+
EXAMPLE
-------
----------------------------------------------------------------
-Creating an archive
-~~~~~~~~~~~~~~~~~~~
-
-`export-subst`
-^^^^^^^^^^^^^^
-
-If the attribute `export-subst` is set for a file then git will expand
-several placeholders when adding this file to an archive. The
-expansion depends on the availability of a commit ID, i.e. if
-linkgit:git-archive[1] has been given a tree instead of a commit or a
-tag then no replacement will be done. The placeholders are the same
-as those for the option `--pretty=format:` of linkgit:git-log[1],
-except that they need to be wrapped like this: `$Format:PLACEHOLDERS$`
-in the file. E.g. the string `$Format:%H$` will be replaced by the
-commit hash.
-
GIT
---
-Part of the linkgit:git[7] suite
+Part of the linkgit:git[1] suite