SYNOPSIS
--------
-'git-reset' [--mixed | --soft | --hard] [<commit-ish>]
+[verse]
+'git reset' [-q] [<commit>] [--] <paths>...
+'git reset' --patch [<commit>] [--] [<paths>...]
+'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>]
DESCRIPTION
-----------
-Sets the current head to the specified commit and optionally resets the
-index and working tree to match.
+In the first and second form, copy entries from <commit> to the index.
+In the third form, set the current branch to <commit>, optionally
+modifying index and worktree to match. The <commit> defaults to HEAD
+in all forms.
-This command is useful if you notice some small error in a recent
-commit (or set of commits) and want to redo that part without showing
-the undo in the history.
-
-If you want to undo a commit other than the latest on a branch,
-gitlink:git-revert[1] is your friend.
+'git reset' [-q] [<commit>] [--] <paths>...::
+ This form resets the index entries for all <paths> to their
+ state at the <commit>. (It does not affect the worktree, nor
+ the current branch.)
++
+This means that `git reset <paths>` is the opposite of `git add
+<paths>`.
-OPTIONS
--------
---mixed::
- Resets the index but not the working tree (ie, the changed files
- are preserved but not marked for commit) and reports what has not
- been updated. This is the default action.
+'git reset' --patch|-p [<commit>] [--] [<paths>...]::
+ Interactively select hunks in the difference between the index
+ and <commit> (defaults to HEAD). The chosen hunks are applied
+ in reverse to the index.
++
+This means that `git reset -p` is the opposite of `git add -p` (see
+linkgit:git-add[1]).
+'git reset' [--<mode>] [<commit>]::
+ This form points the current branch to <commit> and then
+ updates index and working tree according to <mode>, which must
+ be one of the following:
++
+--
--soft::
Does not touch the index file nor the working tree at all, but
requires them to be in a good order. This leaves all your changed
- files "Updated but not checked in", as gitlink:git-status[1] would
+ files "Changes to be committed", as 'git status' would
put it.
+--mixed::
+ Resets the index but not the working tree (i.e., the changed files
+ are preserved but not marked for commit) and reports what has not
+ been updated. This is the default action.
+
--hard::
Matches the working tree and index to that of the tree being
switched to. Any changes to tracked files in the working tree
- since <commit-ish> are lost.
+ since <commit> are lost.
-<commit-ish>::
- Commit to make the current HEAD.
+--merge::
+ Resets the index to match the tree recorded by the named commit,
+ and updates the files that are different between the named commit
+ and the current commit in the working tree.
-Examples
+--keep::
+ Reset the index to the given commit, keeping local changes in
+ the working tree since the current commit, while updating
+ working tree files without local changes to what appears in
+ the given commit. If a file that is different between the
+ current commit and the given commit has local changes, reset
+ is aborted.
+--
+
+If you want to undo a commit other than the latest on a branch,
+linkgit:git-revert[1] is your friend.
+
+
+OPTIONS
+-------
+
+-q::
+--quiet::
+ Be quiet, only report errors.
+
+
+EXAMPLES
--------
+Undo add::
++
+------------
+$ edit <1>
+$ git add frotz.c filfre.c
+$ mailx <2>
+$ git reset <3>
+$ git pull git://info.example.com/ nitfol <4>
+------------
++
+<1> You are happily working on something, and find the changes
+in these files are in good order. You do not want to see them
+when you run "git diff", because you plan to work on other files
+and changes with these files are distracting.
+<2> Somebody asks you to pull, and the changes sounds worthy of merging.
+<3> However, you already dirtied the index (i.e. your index does
+not match the HEAD commit). But you know the pull you are going
+to make does not affect frotz.c nor filfre.c, so you revert the
+index changes for these two files. Your changes in working tree
+remain there.
+<4> Then you can pull and merge, leaving frotz.c and filfre.c
+changes still in the working tree.
+
Undo a commit and redo::
+
------------
<1> This is most often done when you remembered what you
just committed is incomplete, or you misspelled your commit
message, or both. Leaves working tree as it was before "reset".
-<2> make corrections to working tree files.
+<2> Make corrections to working tree files.
<3> "reset" copies the old head to .git/ORIG_HEAD; redo the
commit by starting with its log message. If you do not need to
edit the message further, you can give -C option instead.
-
-Undo commits permanently::
-+
-------------
-$ git commit ...
-$ git reset --hard HEAD~3 <1>
-------------
+
-<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad
-and you do not want to ever see them again. Do *not* do this if
-you have already given these commits to somebody else.
+See also the --amend option to linkgit:git-commit[1].
Undo a commit, making it a topic branch::
+
<2> Rewind the master branch to get rid of those three commits.
<3> Switch to "topic/wip" branch and keep working.
-Undo update-index::
+Undo commits permanently::
+
------------
-$ edit <1>
-$ git-update-index frotz.c filfre.c
-$ mailx <2>
-$ git reset <3>
-$ git pull git://info.example.com/ nitfol <4>
+$ git commit ...
+$ git reset --hard HEAD~3 <1>
------------
+
-<1> you are happily working on something, and find the changes
-in these files are in good order. You do not want to see them
-when you run "git diff", because you plan to work on other files
-and changes with these files are distracting.
-<2> somebody asks you to pull, and the changes sounds worthy of merging.
-<3> however, you already dirtied the index (i.e. your index does
-not match the HEAD commit). But you know the pull you are going
-to make does not affect frotz.c nor filfre.c, so you revert the
-index changes for these two files. Your changes in working tree
-remain there.
-<4> then you can pull and merge, leaving frotz.c and filfre.c
-changes still in the working tree.
+<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad
+and you do not want to ever see them again. Do *not* do this if
+you have already given these commits to somebody else. (See the
+"RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] for
+the implications of doing so.)
Undo a merge or pull::
+
------------
$ git pull <1>
-Trying really trivial in-index merge...
-fatal: Merge requires file-level merging
-Nope.
-...
Auto-merging nitfol
CONFLICT (content): Merge conflict in nitfol
-Automatic merge failed/prevented; fix up by hand
+Automatic merge failed; fix conflicts and then commit the result.
$ git reset --hard <2>
$ git pull . topic/branch <3>
Updating from 41223... to 13134...
-Fast forward
+Fast-forward
$ git reset --hard ORIG_HEAD <4>
------------
+
-<1> try to update from the upstream resulted in a lot of
+<1> Try to update from the upstream resulted in a lot of
conflicts; you were not ready to spend a lot of time merging
right now, so you decide to do that later.
<2> "pull" has not made merge commit, so "git reset --hard"
which is a synonym for "git reset --hard HEAD" clears the mess
from the index file and the working tree.
-<3> merge a topic branch into the current branch, which resulted
-in a fast forward.
-<4> but you decided that the topic branch is not ready for public
+<3> Merge a topic branch into the current branch, which resulted
+in a fast-forward.
+<4> But you decided that the topic branch is not ready for public
consumption yet. "pull" or "merge" always leaves the original
tip of the current branch in ORIG_HEAD, so resetting hard to it
brings your index file and the working tree back to that state,
and resets the tip of the branch to that commit.
+Undo a merge or pull inside a dirty work tree::
++
+------------
+$ git pull <1>
+Auto-merging nitfol
+Merge made by recursive.
+ nitfol | 20 +++++----
+ ...
+$ git reset --merge ORIG_HEAD <2>
+------------
++
+<1> Even if you may have local modifications in your
+working tree, you can safely say "git pull" when you know
+that the change in the other branch does not overlap with
+them.
+<2> After inspecting the result of the merge, you may find
+that the change in the other branch is unsatisfactory. Running
+"git reset --hard ORIG_HEAD" will let you go back to where you
+were, but it will discard your local changes, which you do not
+want. "git reset --merge" keeps your local changes.
+
+
Interrupted workflow::
+
Suppose you are interrupted by an urgent fix request while you
------------
$ git checkout feature ;# you were working in "feature" branch and
$ work work work ;# got interrupted
-$ git commit -a -m 'snapshot WIP' <1>
+$ git commit -a -m "snapshot WIP" <1>
$ git checkout master
$ fix fix fix
$ git commit ;# commit with real log
<3> At this point the index file still has all the WIP changes you
committed as 'snapshot WIP'. This updates the index to show your
WIP files as uncommitted.
++
+See also linkgit:git-stash[1].
+
+Reset a single file in the index::
++
+Suppose you have added a file to your index, but later decide you do not
+want to add it to your commit. You can remove the file from the index
+while keeping your changes with git reset.
++
+------------
+$ git reset -- frotz.c <1>
+$ git commit -m "Commit files in index" <2>
+$ git add frotz.c <3>
+------------
++
+<1> This removes the file from the index while keeping it in the working
+ directory.
+<2> This commits all other changes in the index.
+<3> Adds the file to the index again.
+
+Keep changes in working tree while discarding some previous commits::
++
+Suppose you are working on something and you commit it, and then you
+continue working a bit more, but now you think that what you have in
+your working tree should be in another branch that has nothing to do
+with what you commited previously. You can start a new branch and
+reset it while keeping the changes in your work tree.
++
+------------
+$ git tag start
+$ git checkout -b branch1
+$ edit
+$ git commit ... <1>
+$ edit
+$ git checkout -b branch2 <2>
+$ git reset --keep start <3>
+------------
++
+<1> This commits your first edits in branch1.
+<2> In the ideal world, you could have realized that the earlier
+ commit did not belong to the new topic when you created and switched
+ to branch2 (i.e. "git checkout -b branch2 start"), but nobody is
+ perfect.
+<3> But you can use "reset --keep" to remove the unwanted commit after
+ you switched to "branch2".
+
+
+DISCUSSION
+----------
+
+The tables below show what happens when running:
+
+----------
+git reset --option target
+----------
+
+to reset the HEAD to another commit (`target`) with the different
+reset options depending on the state of the files.
+
+In these tables, A, B, C and D are some different states of a
+file. For example, the first line of the first table means that if a
+file is in state A in the working tree, in state B in the index, in
+state C in HEAD and in state D in the target, then "git reset --soft
+target" will put the file in state A in the working tree, in state B
+in the index and in state D in HEAD.
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ A B C D --soft A B D
+ --mixed A D D
+ --hard D D D
+ --merge (disallowed)
+ --keep (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ A B C C --soft A B C
+ --mixed A C C
+ --hard C C C
+ --merge (disallowed)
+ --keep A C C
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B B C D --soft B B D
+ --mixed B D D
+ --hard D D D
+ --merge D D D
+ --keep (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B B C C --soft B B C
+ --mixed B C C
+ --hard C C C
+ --merge C C C
+ --keep B C C
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B C C D --soft B C D
+ --mixed B D D
+ --hard D D D
+ --merge (disallowed)
+ --keep (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B C C C --soft B C C
+ --mixed B C C
+ --hard C C C
+ --merge B C C
+ --keep B C C
+
+"reset --merge" is meant to be used when resetting out of a conflicted
+merge. Any mergy operation guarantees that the work tree file that is
+involved in the merge does not have local change wrt the index before
+it starts, and that it writes the result out to the work tree. So if
+we see some difference between the index and the target and also
+between the index and the work tree, then it means that we are not
+resetting out from a state that a mergy operation left after failing
+with a conflict. That is why we disallow --merge option in this case.
+
+"reset --keep" is meant to be used when removing some of the last
+commits in the current branch while keeping changes in the working
+tree. If there could be conflicts between the changes in the commit we
+want to remove and the changes in the working tree we want to keep,
+the reset is disallowed. That's why it is disallowed if there are both
+changes between the working tree and HEAD, and between HEAD and the
+target. To be safe, it is also disallowed when there are unmerged
+entries.
+
+The following tables show what happens when there are unmerged
+entries:
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ X U A B --soft (disallowed)
+ --mixed X B B
+ --hard B B B
+ --merge B B B
+ --keep (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ X U A A --soft (disallowed)
+ --mixed X A A
+ --hard A A A
+ --merge A A A
+ --keep (disallowed)
+
+X means any state and U means an unmerged index.
+
Author
------
-Written by Junio C Hamano <junkio@cox.net> and Linus Torvalds <torvalds@osdl.org>
+Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org>
Documentation
--------------
GIT
---
-Part of the gitlink:git[7] suite
+Part of the linkgit:git[1] suite