amWorkDir::
Advice that shows the location of the patch file when
linkgit:git-am[1] fails to apply it.
+ rmHints::
+ In case of failure in the output of linkgit:git-rm[1],
+ show directions on how to proceed from the current state.
--
core.fileMode::
will probe and set core.fileMode false if appropriate when the
repository is created.
-core.ignoreCygwinFSTricks::
- This option is only used by Cygwin implementation of Git. If false,
- the Cygwin stat() and lstat() functions are used. This may be useful
- if your repository consists of a few separate directories joined in
- one hierarchy using Cygwin mount. If true, Git uses native Win32 API
- whenever it is possible and falls back to Cygwin functions only to
- handle symbol links. The native mode is more than twice faster than
- normal Cygwin l/stat() functions. True by default, unless core.filemode
- is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's
- POSIX emulation is required to support core.filemode.
-
core.ignorecase::
If true, this option enables various workarounds to enable
Git to work better on filesystems that are not case sensitive,
This option defaults to never.
branch.<name>.remote::
- When in branch <name>, it tells 'git fetch' and 'git push' which
- remote to fetch from/push to. It defaults to `origin` if no remote is
- configured. `origin` is also used if you are not on any branch.
+ When on branch <name>, it tells 'git fetch' and 'git push'
+ which remote to fetch from/push to. The remote to push to
+ may be overridden with `remote.pushdefault` (for all branches).
+ The remote to push to, for the current branch, may be further
+ overridden by `branch.<name>.pushremote`. If no remote is
+ configured, or if you are not on any branch, it defaults to
+ `origin` for fetching and `remote.pushdefault` for pushing.
+
+branch.<name>.pushremote::
+ When on branch <name>, it overrides `branch.<name>.remote` for
+ pushing. It also overrides `remote.pushdefault` for pushing
+ from branch <name>. When you pull from one place (e.g. your
+ upstream) and push to another place (e.g. your own publishing
+ repository), you would want to set `remote.pushdefault` to
+ specify the remote to push to for all branches, and use this
+ option to override it for a specific branch.
branch.<name>.merge::
Defines, together with branch.<name>.remote, the upstream branch
instead of merging the default branch from the default remote when
"git pull" is run. See "pull.rebase" for doing this in a non
branch-specific manner.
++
+ When preserve, also pass `--preserve-merges` along to 'git rebase'
+ so that locally committed merge commits will not be flattened
+ by running 'git pull'.
+
*NOTE*: this is a possibly dangerous operation; do *not* use
it unless you understand the implications (see linkgit:git-rebase[1]
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
`current` (the current branch), `local` (a local branch),
- `remote` (a remote-tracking branch in refs/remotes/), `plain` (other
+ `remote` (a remote-tracking branch in refs/remotes/),
+ `upstream` (upstream tracking branch), `plain` (other
refs).
+
The value for these configuration variables is a list of colors (at most
color.interactive::
When set to `always`, always use colors for interactive prompts
- and displays (such as those used by "git-add --interactive").
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ and displays (such as those used by "git-add --interactive" and
+ "git-clean --interactive"). When false (or `never`), never.
+ When set to `true` or `auto`, use colors only when the output is
+ to the terminal. Defaults to false.
color.interactive.<slot>::
- Use customized color for 'git add --interactive'
- output. `<slot>` may be `prompt`, `header`, `help` or `error`, for
- four distinct types of normal output from interactive
- commands. The values of these variables may be specified as
- in color.branch.<slot>.
+ Use customized color for 'git add --interactive' and 'git clean
+ --interactive' output. `<slot>` may be `prompt`, `header`, `help`
+ or `error`, for four distinct types of normal output from
+ interactive commands. The values of these variables may be
+ specified as in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
as `color.diff` and `color.grep` that control the use of color
per command family. Its scope will expand as more commands learn
configuration to set a default for the `--color` option. Set it
- to `always` if you want all output not intended for machine
- consumption to use color, to `true` or `auto` if you want such
- output to use color when written to the terminal, or to `false` or
- `never` if you prefer Git commands not to use color unless enabled
- explicitly with some other configuration or the `--color` option.
+ to `false` or `never` if you prefer Git commands not to use
+ color unless enabled explicitly with some other configuration
+ or the `--color` option. Set it to `always` if you want all
+ output not intended for machine consumption to use color, to
+ `true` or `auto` (this is the default since Git 1.8.4) if you
+ want such output to use color when written to the terminal.
column.ui::
Specify whether supported commands should output in columns.
This variable consists of a list of tokens separated by spaces
or commas:
+
+These options control when the feature should be enabled
+(defaults to 'never'):
++
--
`always`;;
always show in columns
never show in columns
`auto`;;
show in columns if the output is to the terminal
+--
++
+These options control layout (defaults to 'column'). Setting any
+of these implies 'always' if none of 'always', 'never', or 'auto' are
+specified.
++
+--
`column`;;
- fill columns before rows (default)
+ fill columns before rows
`row`;;
fill rows before columns
`plain`;;
show in one column
+--
++
+Finally, these options can be combined with a layout option (defaults
+to 'nodense'):
++
+--
`dense`;;
make unequal size columns to utilize more space
`nodense`;;
make equal size columns
--
-+
-This option defaults to 'never'.
column.branch::
Specify whether to output branch listing in `git branch` in columns.
See `column.ui` for details.
+column.clean::
+ Specify the layout when list items in `git clean -i`, which always
+ shows files and directories in columns. See `column.ui` for details.
+
column.status::
Specify whether to output untracked files in `git status` in columns.
See `column.ui` for details.
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
+fetch.prune::
+ If true, fetch will automatically behave as if the `--prune`
+ option was given on the command line. See also `remote.<name>.prune`.
+
format.attach::
Enable multipart/mixed attachments as the default for
'format-patch'. The value can also be a double quoted string
the rights to submit this work under the same open source license.
Please see the 'SubmittingPatches' document for further discussion.
+format.coverLetter::
+ A boolean that controls whether to generate a cover-letter when
+ format-patch is invoked, but in addition can be set to "auto", to
+ generate a cover-letter only when there's more than one patch.
+
filter.<driver>.clean::
The command which is used to convert the content of a worktree
file to a blob upon checkin. See linkgit:gitattributes[5] for
of the file to read cookies from should be plain HTTP headers or
the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
NOTE that the file specified with http.cookiefile is only used as
- input. No cookies will be stored in the file.
+ input unless http.saveCookies is set.
+
+http.savecookies::
+ If set, store cookies received during requests to the file specified by
+ http.cookiefile. Has no effect if http.cookiefile is unset.
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
with when fetching or pushing over HTTPS. Can be overridden
by the 'GIT_SSL_CAPATH' environment variable.
+http.sslTry::
+ Attempt to use AUTH SSL/TLS and encrypted data transfers
+ when connecting via regular FTP protocol. This might be needed
+ if the FTP server requires it for security reasons or you wish
+ to connect securely whenever remote FTP server supports it.
+ Default is false since it might trigger certificate verification
+ errors on misconfigured servers.
+
http.maxRequests::
How many HTTP requests to launch in parallel. Can be overridden
by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
of common USER_AGENT strings (but not including those like git/1.7.1).
Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.
+http.<url>.*::
+ Any of the http.* options above can be applied selectively to some urls.
+ For a config key to match a URL, each element of the config key is
+ compared to that of the URL, in the following order:
++
+--
+. Scheme (e.g., `https` in `https://example.com/`). This field
+ must match exactly between the config key and the URL.
+
+. Host/domain name (e.g., `example.com` in `https://example.com/`).
+ This field must match exactly between the config key and the URL.
+
+. Port number (e.g., `8080` in `http://example.com:8080/`).
+ This field must match exactly between the config key and the URL.
+ Omitted port numbers are automatically converted to the correct
+ default for the scheme before matching.
+
+. Path (e.g., `repo.git` in `https://example.com/repo.git`). The
+ path field of the config key must match the path field of the URL
+ either exactly or as a prefix of slash-delimited path elements. This means
+ a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
+ match on a slash (`/`) boundary. Longer matches take precedence (so a config
+ key with path `foo/bar` is a better match to URL path `foo/bar` than a config
+ key with just path `foo/`).
+
+. User name (e.g., `user` in `https://user@example.com/repo.git`). If
+ the config key has a user name it must match the user name in the
+ URL exactly. If the config key does not have a user name, that
+ config key will match a URL with any user name (including none),
+ but at a lower precedence than a config key with a user name.
+--
++
+The list above is ordered by decreasing precedence; a URL that matches
+a config key's path is preferred to one that matches its user name. For example,
+if the URL is `https://user@example.com/foo/bar` a config key match of
+`https://example.com/foo` will be preferred over a config key match of
+`https://user@example.com`.
++
+All URLs are normalized before attempting any matching (the password part,
+if embedded in the URL, is always ignored for matching purposes) so that
+equivalent urls that are simply spelled differently will match properly.
+Environment variable settings always override any matches. The urls that are
+matched against are those given directly to Git commands. This means any URLs
+visited as a result of a redirection do not participate in matching.
+
i18n.commitEncoding::
Character encoding the commit messages are stored in; Git itself
does not care per se, but this information is necessary e.g. when
of merging the default branch from the default remote when "git
pull" is run. See "branch.<name>.rebase" for setting this on a
per-branch basis.
++
+ When preserve, also pass `--preserve-merges` along to 'git rebase'
+ so that locally committed merge commits will not be flattened
+ by running 'git pull'.
+
*NOTE*: this is a possibly dangerous operation; do *not* use
it unless you understand the implications (see linkgit:git-rebase[1]
The default merge strategy to use when pulling a single branch.
push.default::
- Defines the action `git push` should take if no refspec is given
- on the command line, no refspec is configured in the remote, and
- no refspec is implied by any of the options given on the command
- line. Possible values are:
+ Defines the action `git push` should take if no refspec is
+ explicitly given. Different values are well-suited for
+ specific workflows; for instance, in a purely central workflow
+ (i.e. the fetch source is equal to the push destination),
+ `upstream` is probably what you want. Possible values are:
+
--
-* `nothing` - do not push anything.
-* `matching` - push all branches having the same name in both ends.
- This is for those who prepare all the branches into a publishable
- shape and then push them out with a single command. It is not
- appropriate for pushing into a repository shared by multiple users,
- since locally stalled branches will attempt a non-fast forward push
- if other users updated the branch.
- +
- This is currently the default, but Git 2.0 will change the default
- to `simple`.
-* `upstream` - push the current branch to its upstream branch
- (`tracking` is a deprecated synonym for this).
- With this, `git push` will update the same remote ref as the one which
- is merged by `git pull`, making `push` and `pull` symmetrical.
- See "branch.<name>.merge" for how to configure the upstream branch.
-* `simple` - like `upstream`, but refuses to push if the upstream
- branch's name is different from the local one. This is the safest
- option and is well-suited for beginners. It will become the default
- in Git 2.0.
-* `current` - push the current branch to a branch of the same name.
---
+
+* `nothing` - do not push anything (error out) unless a refspec is
+ explicitly given. This is primarily meant for people who want to
+ avoid mistakes by always being explicit.
+
+* `current` - push the current branch to update a branch with the same
+ name on the receiving end. Works in both central and non-central
+ workflows.
+
+* `upstream` - push the current branch back to the branch whose
+ changes are usually integrated into the current branch (which is
+ called `@{upstream}`). This mode only makes sense if you are
+ pushing to the same repository you would normally pull from
+ (i.e. central workflow).
+
+* `simple` - in centralized workflow, work like `upstream` with an
+ added safety to refuse to push if the upstream branch's name is
+ different from the local one.
++
+When pushing to a remote that is different from the remote you normally
+pull from, work as `current`. This is the safest option and is suited
+for beginners.
++
+This mode will become the default in Git 2.0.
+
+* `matching` - push all branches having the same name on both ends.
+ This makes the repository you are pushing to remember the set of
+ branches that will be pushed out (e.g. if you always push 'maint'
+ and 'master' there and no other branches, the repository you push
+ to will have these two branches, and your local 'maint' and
+ 'master' will be pushed there).
++
+To use this mode effectively, you have to make sure _all_ the
+branches you would push out are ready to be pushed out before
+running 'git push', as the whole point of this mode is to allow you
+to push all of the branches in one go. If you usually finish work
+on only one branch and push out the result, while other branches are
+unfinished, this mode is not for you. Also this mode is not
+suitable for pushing into a shared central repository, as other
+people may add new branches there, or update the tip of existing
+branches outside your control.
+
-The `simple`, `current` and `upstream` modes are for those who want to
-push out a single branch after finishing work, even when the other
-branches are not yet ready to be pushed out. If you are working with
-other people to push into the same shared repository, you would want
-to use one of these.
+This is currently the default, but Git 2.0 will change the default
+to `simple`.
+
+--
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
rebase.autosquash::
If set to true enable '--autosquash' option by default.
+rebase.autostash::
+ When set to true, automatically create a temporary stash
+ before the operation begins, and apply it after the operation
+ ends. This means that you can run rebase on a dirty worktree.
+ However, use with care: the final stash application after a
+ successful rebase might result in non-trivial conflicts.
+ Defaults to false.
+
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
+remote.pushdefault::
+ The remote to push to by default. Overrides
+ `branch.<name>.remote` for all branches, and is overridden by
+ `branch.<name>.pushremote` for specific branches.
+
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
Setting this to a value <vcs> will cause Git to interact with
the remote with the git-remote-<vcs> helper.
+remote.<name>.prune::
+ When set to true, fetching from this remote by default will also
+ remove any remote-tracking branches which no longer exist on the
+ remote (as if the `--prune` option was give on the command line).
+ Overrides `fetch.prune` settings, if any.
+
remotes.<group>::
The list of remotes which are fetched by "git remote update
<group>". See linkgit:git-remote[1].
sendemail.smtpssl::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
+sendemail.smtpsslcertpath::
+ Path to ca-certificates (either a directory or a single file).
+ Set it to an empty string to disable certificate verification.
+
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
found below, taking precedence over those when the this
sendemail.aliasesfile::
sendemail.aliasfiletype::
+sendemail.annotate::
sendemail.bcc::
sendemail.cc::
sendemail.cccmd::
relative to the repository root (this was the default for Git
prior to v1.5.4).
+status.short::
+ Set to true to enable --short by default in linkgit:git-status[1].
+ The option --no-short takes precedence over this variable.
+
+status.branch::
+ Set to true to enable --branch by default in linkgit:git-status[1].
+ The option --no-branch takes precedence over this variable.
+
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which
are under the hierarchies listed on the value of this
variable is excluded, and is hidden from `git ls-remote`,
`git fetch`, etc. An attempt to fetch a hidden ref by `git
- fetch` will fail.
+ fetch` will fail. See also `uploadpack.allowtipsha1inwant`.
+
+uploadpack.allowtipsha1inwant::
+ When `uploadpack.hiderefs` is in effect, allow `upload-pack`
+ to accept a fetch request that asks for an object at the tip
+ of a hidden ref (by default, such a request is rejected).
+ see also `uploadpack.hiderefs`.
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to