# Copyright (c) 2005 Junio C Hamano.
#
-USAGE='[--onto <newbase>] <upstream> [<branch>]'
+USAGE='[-v] [--onto <newbase>] <upstream> [<branch>]'
LONG_USAGE='git-rebase replaces <branch> with a new branch of the
same name. When the --onto option is provided the new branch starts
out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
If you would prefer to skip this patch, instead run \"git rebase --skip\".
To restore the original branch and stop rebasing run \"git rebase --abort\".
"
-
-MRESOLVEMSG="
-When you have resolved this problem run \"git rebase --continue\".
-To restore the original branch and stop rebasing run \"git rebase --abort\".
-"
unset newbase
strategy=recursive
do_merge=
dotest=$GIT_DIR/.dotest-merge
prec=4
+verbose=
continue_merge () {
test -n "$prev_head" || die "prev_head must be defined"
then
echo "You still have unmerged paths in your index"
echo "did you forget update-index?"
- die "$MRESOLVEMSG"
+ die "$RESOLVEMSG"
fi
if test -n "`git-diff-index HEAD`"
then
- git-commit -C "`cat $dotest/current`"
+ if ! git-commit -C "`cat $dotest/current`"
+ then
+ echo "Commit failed, please do not call \"git commit\""
+ echo "directly, but instead do one of the following: "
+ die "$RESOLVEMSG"
+ fi
+ printf "Committed: %0${prec}d" $msgnum
else
- echo "Previous merge succeeded automatically"
+ printf "Already applied: %0${prec}d" $msgnum
fi
+ echo ' '`git-rev-list --pretty=oneline -1 HEAD | \
+ sed 's/^[a-f0-9]\+ //'`
prev_head=`git-rev-parse HEAD^0`
-
# save the resulting commit so we can read-tree on it later
- echo "$prev_head" > "$dotest/cmt.$msgnum.result"
echo "$prev_head" > "$dotest/prev_head"
# onto the next patch:
rv=$?
case "$rv" in
0)
- if test -n "`git-diff-index HEAD`"
- then
- git-commit -C "$cmt" || die "commit failed: $MRESOLVEMSG"
- fi
+ return
;;
1)
test -d "$GIT_DIR/rr-cache" && git-rerere
- die "$MRESOLVEMSG"
+ die "$RESOLVEMSG"
;;
2)
echo "Strategy: $rv $strategy failed, try another" 1>&2
- die "$MRESOLVEMSG"
+ die "$RESOLVEMSG"
;;
*)
die "Unknown exit code ($rv) from command:" \
}
finish_rb_merge () {
- set -e
-
- msgnum=1
- echo "Finalizing rebased commits..."
- git-reset --hard "`cat $dotest/onto`"
- end="`cat $dotest/end`"
- while test "$msgnum" -le "$end"
- do
- git-read-tree `cat "$dotest/cmt.$msgnum.result"`
- git-checkout-index -q -f -u -a
- if test -n "`git-diff-index HEAD`"
- then
- git-commit -C "`cat $dotest/cmt.$msgnum`"
- printf "Committed %0${prec}d" $msgnum
- else
- printf "Already applied: %0${prec}d" $msgnum
- fi
- echo ' '`git-rev-list --pretty=oneline -1 HEAD | \
- sed 's/^[a-f0-9]\+ //'`
- msgnum=$(($msgnum + 1))
- done
rm -r "$dotest"
echo "All done."
}
finish_rb_merge
exit
fi
- git am --resolved --3way --resolvemsg="$RESOLVEMSG"
+ git am --resolved --3way --resolvemsg="$RESOLVEMSG" \
+ --reflog-action=rebase
exit
;;
--skip)
if test -d "$dotest"
then
- die "--skip is not supported when using --merge"
+ prev_head="`cat $dotest/prev_head`"
+ end="`cat $dotest/end`"
+ msgnum="`cat $dotest/msgnum`"
+ msgnum=$(($msgnum + 1))
+ onto="`cat $dotest/onto`"
+ while test "$msgnum" -le "$end"
+ do
+ call_merge "$msgnum"
+ continue_merge
+ done
+ finish_rb_merge
+ exit
fi
- git am -3 --skip --resolvemsg="$RESOLVEMSG"
+ git am -3 --skip --resolvemsg="$RESOLVEMSG" \
+ --reflog-action=rebase
exit
;;
--abort)
-s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
case "$#,$1" in
*,*=*)
- strategy=`expr "$1" : '-[^=]*=\(.*\)'` ;;
+ strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
1,*)
usage ;;
*)
esac
do_merge=t
;;
+ -v|--verbose)
+ verbose=t
+ ;;
-*)
usage
;;
# Check if we are already based on $onto, but this should be
# done only when upstream and onto are the same.
-if test "$upstream" = "$onto"
+mb=$(git-merge-base "$onto" "$branch")
+if test "$upstream" = "$onto" && test "$mb" = "$onto"
then
- mb=$(git-merge-base "$onto" "$branch")
- if test "$mb" = "$onto"
- then
- echo >&2 "Current branch $branch_name is up to date."
- exit 0
- fi
+ echo >&2 "Current branch $branch_name is up to date."
+ exit 0
+fi
+
+if test -n "$verbose"
+then
+ echo "Changes from $mb to $onto:"
+ git-diff-tree --stat --summary "$mb" "$onto"
fi
# Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
# If the $onto is a proper descendant of the tip of the branch, then
# we just fast forwarded.
-if test "$mb" = "$onto"
+if test "$mb" = "$branch"
then
- echo >&2 "Fast-forwarded $branch to $newbase."
+ echo >&2 "Fast-forwarded $branch_name to $onto_name."
exit 0
fi
if test -z "$do_merge"
then
- git-format-patch -k --stdout --full-index "$upstream"..ORIG_HEAD |
- git am --binary -3 -k --resolvemsg="$RESOLVEMSG"
+ git-format-patch -k --stdout --full-index --ignore-if-in-upstream "$upstream"..ORIG_HEAD |
+ git am --binary -3 -k --resolvemsg="$RESOLVEMSG" \
+ --reflog-action=rebase
exit $?
fi
-if test "@@NO_PYTHON@@" && test "$strategy" = "recursive"
+if test "@@NO_PYTHON@@" && test "$strategy" = "recursive-old"
then
- die 'The recursive merge strategy currently relies on Python,
+ die 'The recursive-old merge strategy is written in Python,
which this installation of git was not configured with. Please consider
-a different merge strategy (e.g. octopus, resolve, stupid, ours)
+a different merge strategy (e.g. recursive, resolve, or stupid)
or install Python and git with Python support.'
fi
msgnum=0
for cmt in `git-rev-list --no-merges "$upstream"..ORIG_HEAD \
- | perl -e 'print reverse <>'`
+ | @@PERL@@ -e 'print reverse <>'`
do
msgnum=$(($msgnum + 1))
echo "$cmt" > "$dotest/cmt.$msgnum"