1024", "by 1024x1024", etc.
color::
- The value for a variables that takes a color is a list of
- colors (at most two) and attributes (at most one), separated
- by spaces. The colors accepted are `normal`, `black`,
- `red`, `green`, `yellow`, `blue`, `magenta`, `cyan` and
- `white`; the attributes are `bold`, `dim`, `ul`, `blink` and
- `reverse`. The first color given is the foreground; the
- second is the background. The position of the attribute, if
- any, doesn't matter. Attributes may be turned off specifically
- by prefixing them with `no` (e.g., `noreverse`, `noul`, etc).
-+
-Colors (foreground and background) may also be given as numbers between
-0 and 255; these use ANSI 256-color mode (but note that not all
-terminals may support this). If your terminal supports it, you may also
-specify 24-bit RGB values as hex, like `#ff0ab3`.
-+
-The attributes are meant to be reset at the beginning of each item
-in the colored output, so setting color.decorate.branch to `black`
-will paint that branch name in a plain `black`, even if the previous
-thing on the same output line (e.g. opening parenthesis before the
-list of branch names in `log --decorate` output) is set to be
-painted with `bold` or some other attribute.
+ The value for a variable that takes a color is a list of
+ colors (at most two, one for foreground and one for background)
+ and attributes (as many as you want), separated by spaces.
++
+The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
+`blue`, `magenta`, `cyan` and `white`. The first color given is the
+foreground; the second is the background.
++
+Colors may also be given as numbers between 0 and 255; these use ANSI
+256-color mode (but note that not all terminals may support this). If
+your terminal supports it, you may also specify 24-bit RGB values as
+hex, like `#ff0ab3`.
++
+The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
+`italic`, and `strike` (for crossed-out or "strikethrough" letters).
+The position of any attributes with respect to the colors
+(before, after, or in between), doesn't matter. Specific attributes may
+be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
+`no-ul`, etc).
++
+For git's pre-defined color slots, the attributes are meant to be reset
+at the beginning of each item in the colored output. So setting
+`color.decorate.branch` to `black` will paint that branch name in a
+plain `black`, even if the previous thing on the same output line (e.g.
+opening parenthesis before the list of branch names in `log --decorate`
+output) is set to be painted with `bold` or some other attribute.
+However, custom log formats may do more complicated and layered
+coloring, and the negated forms may be useful there.
pathname::
A variable that takes a pathname value can be given a
mechanism.
core.autocrlf::
- Setting this variable to "true" is almost the same as setting
- the `text` attribute to "auto" on all files except that text
- files are not guaranteed to be normalized: files that contain
- `CRLF` in the repository will not be touched. Use this
- setting if you want to have `CRLF` line endings in your
- working directory even though the repository does not have
- normalized line endings. This variable can be set to 'input',
+ Setting this variable to "true" is the same as setting
+ the `text` attribute to "auto" on all files and core.eol to "crlf".
+ Set to true if you want to have `CRLF` line endings in your
+ working directory and the repository has LF line endings.
+ This variable can be set to 'input',
in which case no output conversion is performed.
core.symlinks::
This is useful for excluding servers inside a firewall from
proxy use, while defaulting to a common proxy for external domains.
+core.sshCommand::
+ If this variable is set, `git fetch` and `git push` will
+ use the specified command instead of `ssh` when they need to
+ connect to a remote system. The command is in the same form as
+ the `GIT_SSH_COMMAND` environment variable and is overridden
+ when the environment variable is set.
+
core.ignoreStat::
If true, Git will avoid using lstat() calls to detect if files have
changed by setting the "assume-unchanged" bit for those tracked files
A boolean to enable/disable color in the output of
linkgit:git-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
linkgit:git-log[1], and linkgit:git-show[1] will use color
for all patches. If it is set to `true` or `auto`, those
commands will only use color when output is to the terminal.
- Defaults to false.
+ If unset, then the value of `color.ui` is used (`auto` by
+ default).
+
This does not affect linkgit:git-format-patch[1] or the
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
color.grep::
When set to `always`, always highlight matches. When `false` (or
`never`), never. When set to `true` or `auto`, use color only
- when the output is written to the terminal. Defaults to `false`.
+ when the output is written to the terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.grep.<slot>::
Use customized color for grep colorization. `<slot>` specifies which
and displays (such as those used by "git-add --interactive" and
"git-clean --interactive"). When false (or `never`), never.
When set to `true` or `auto`, use colors only when the output is
- to the terminal. Defaults to false.
+ to the terminal. If unset, then the value of `color.ui` is
+ used (`auto` by default).
color.interactive.<slot>::
Use customized color for 'git add --interactive' and 'git clean
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
- only when the output is to a terminal. Defaults to false.
+ only when the output is to a terminal. If unset, then the
+ value of `color.ui` is used (`auto` by default).
color.status.<slot>::
Use customized color for status colorization. `<slot>` is
difftool.prompt::
Prompt before each invocation of the diff tool.
+fastimport.unpackLimit::
+ If the number of objects imported by linkgit:git-fast-import[1]
+ is below this limit, then the objects will be unpacked into
+ loose object files. However if the number of imported objects
+ equals or exceeds this limit then the pack will be stored as a
+ pack. Storing the pack from a fast-import can make the import
+ operation complete faster, especially on slow filesystems. If
+ not set, the value of `transfer.unpackLimit` is used instead.
+
fetch.recurseSubmodules::
This option can be either set to a boolean value or to 'on-demand'.
Setting it to a boolean changes the behavior of fetch and pull to
If true, fetch will automatically behave as if the `--prune`
option was given on the command line. See also `remote.<name>.prune`.
+fetch.output::
+ Control how ref update status is printed. Valid values are
+ `full` and `compact`. Default value is `full`. See section
+ OUTPUT in linkgit:git-fetch[1] for detail.
+
format.attach::
Enable multipart/mixed attachments as the default for
'format-patch'. The value can also be a double quoted string
value as the boundary. See the --attach option in
linkgit:git-format-patch[1].
+format.from::
+ Provides the default value for the `--from` option to format-patch.
+ Accepts a boolean value, or a name and email address. If false,
+ format-patch defaults to `--no-from`, using commit authors directly in
+ the "From:" field of patch mails. If true, format-patch defaults to
+ `--from`, using your committer identity in the "From:" field of patch
+ mails and including a "From:" field in the body of the patch mail if
+ different. If set to a non-boolean value, format-patch uses that
+ value instead of your committer identity. Defaults to false.
+
format.numbered::
A boolean which can enable or disable sequence numbers in patch
subjects. It defaults to "auto" which enables it only if there
gc.aggressiveDepth::
The depth parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
- to 250.
+ to 50.
gc.aggressiveWindow::
The window size parameter used in the delta compression
command in the todo-list.
Defaults to "ignore".
-rebase.instructionFormat
+rebase.instructionFormat::
A format string, as specified in linkgit:git-log[1], to be used for
the instruction list during an interactive rebase. The format will automatically
have the long commit hash prepended to the format.
receive.advertiseAtomic::
By default, git-receive-pack will advertise the atomic push
- capability to its clients. If you don't want to this capability
- to be advertised, set this variable to false.
+ capability to its clients. If you don't want to advertise this
+ capability, set this variable to false.
+
+receive.advertisePushOptions::
+ By default, git-receive-pack will advertise the push options
+ capability to its clients. If you don't want to advertise this
+ capability, set this variable to false.
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
can be safely ignored such as invalid committer email addresses.
Note: corrupt objects cannot be skipped with this setting.
+receive.keepAlive::
+ After receiving the pack from the client, `receive-pack` may
+ produce no output (if `--quiet` was specified) while processing
+ the pack, causing some networks to drop the TCP connection.
+ With this option set, if `receive-pack` does not transmit
+ any data in this phase for `receive.keepAlive` seconds, it will
+ send a short keepalive packet. The default is 5 seconds; set
+ to 0 to disable keepalives entirely.
+
receive.unpackLimit::
If the number of objects received in a push is below this
limit then the objects will be unpacked into loose object
option will show diffstat of the stash. Defaults to true.
See description of 'show' command in linkgit:git-stash[1].
-submodule.<name>.path::
submodule.<name>.url::
- The path within this project and URL for a submodule. These
- variables are initially populated by 'git submodule init'. See
- linkgit:git-submodule[1] and linkgit:gitmodules[5] for
- details.
+ The URL for a submodule. This variable is copied from the .gitmodules
+ file to the git config via 'git submodule init'. The user can change
+ the configured URL before obtaining the submodule via 'git submodule
+ update'. After obtaining the submodule, the presence of this variable
+ is used as a sign whether the submodule is of interest to git commands.
+ See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
submodule.<name>.update::
The default update procedure for a submodule. This variable
`uploadpack.keepAlive` seconds. Setting this option to 0
disables keepalive packets entirely. The default is 5 seconds.
+uploadpack.packObjectsHook::
+ If this option is set, when `upload-pack` would run
+ `git pack-objects` to create a packfile for a client, it will
+ run this shell command instead. The `pack-objects` command and
+ arguments it _would_ have run (including the `git pack-objects`
+ at the beginning) are appended to the shell command. The stdin
+ and stdout of the hook are treated as if `pack-objects` itself
+ was run. I.e., `upload-pack` will feed input intended for
+ `pack-objects` to the hook, and expects a completed packfile on
+ stdout.
++
+Note that this configuration variable is ignored if it is seen in the
+repository-level config (this is a safety measure against fetching from
+untrusted repositories).
+
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a