+Checklist (and a short version for the impatient):
+
+ Commits:
+
+ - make commits of logical units
+ - check for unnecessary whitespace with "git diff --check"
+ before committing
+ - do not check in commented out code or unneeded files
+ - provide a meaningful commit message
+ - the first line of the commit message should be a short
+ description and should skip the full stop
+ - if you want your work included in git.git, add a
+ "Signed-off-by: Your Name <you@example.com>" line to the
+ commit message (or just use the option "-s" when
+ committing) to confirm that you agree to the Developer's
+ Certificate of Origin
+ - make sure that you have tests for the bug you are fixing
+ - make sure that the test suite passes after your commit
+
+ Patch:
+
+ - use "git format-patch -M" to create the patch
+ - do not PGP sign your patch
+ - do not attach your patch, but read in the mail
+ body, unless you cannot teach your mailer to
+ leave the formatting of the patch alone.
+ - be careful doing cut & paste into your mailer, not to
+ corrupt whitespaces.
+ - provide additional information (which is unsuitable for
+ the commit message) between the "---" and the diffstat
+ - if you change, add, or remove a command line option or
+ make some other user interface change, the associated
+ documentation should be updated as well.
+ - if your name is not writable in ASCII, make sure that
+ you send off a message in the correct encoding.
+ - send the patch to the list (git@vger.kernel.org) and the
+ maintainer (gitster@pobox.com) if (and only if) the patch
+ is ready for inclusion. If you use git-send-email(1),
+ please test it first by sending email to yourself.
+
+Long version:
+
I started reading over the SubmittingPatches document for Linux
kernel, primarily because I wanted to have a document similar to
it for the core GIT to make sure people understand what they are
doing when they write "Signed-off-by" line.
But the patch submission requirements are a lot more relaxed
-here, because the core GIT is thousand times smaller ;-). So
-here is only the relevant bits.
+here on the technical/contents front, because the core GIT is
+thousand times smaller ;-). So here is only the relevant bits.
(1) Make separate commits for logically separate changes.
Describe the technical detail of the change(s).
-If your description starts to get long, that's a sign that you
+If your description starts to get too long, that's a sign that you
probably need to split up your commit to finer grained pieces.
+Oh, another thing. I am picky about whitespaces. Make sure your
+changes do not trigger errors with the sample pre-commit hook shipped
+in templates/hooks--pre-commit. To help ensure this does not happen,
+run git diff --check on your changes before you commit.
+
+
+(1a) Try to be nice to older C compilers
+
+We try to support wide range of C compilers to compile
+git with. That means that you should not use C99 initializers, even
+if a lot of compilers grok it.
+
+Also, variables have to be declared at the beginning of the block
+(you can check this with gcc, using the -Wdeclaration-after-statement
+option).
-(2) Generate your patch using git/cogito out of your commits.
+Another thing: NULL pointers shall be written as NULL, not as 0.
+
+
+(2) Generate your patch using git tools out of your commits.
+
+git based diff tools (git, Cogito, and StGIT included) generate
+unidiff which is the preferred format.
-git diff tools generate unidiff which is the preferred format.
You do not have to be afraid to use -M option to "git diff" or
"git format-patch", if your patch involves file renames. The
receiving end can handle them just fine.
which do not belong in a patch submission. Make sure to review
your patch after generating it, to ensure accuracy. Before
sending out, please make sure it cleanly applies to the "master"
-branch head.
+branch head. If you are preparing a work based on "next" branch,
+that is fine, but please mark it as such.
(3) Sending your patches.
-People on the git mailing list needs to be able to read and
+People on the git mailing list need to be able to read and
comment on the changes you are submitting. It is important for
a developer to be able to "quote" your changes, using standard
e-mail tools, so that they may comment on specific portions of
-your code. For this reason, all patches should be submitting
-e-mail "inline". WARNING: Be wary of your MUAs word-wrap
-corrupting your patch. Do not cut-n-paste your patch.
+your code. For this reason, all patches should be submitted
+"inline". WARNING: Be wary of your MUAs word-wrap
+corrupting your patch. Do not cut-n-paste your patch; you can
+lose tabs that way if you are not careful.
-It is common convention to prefix your subject line with
+It is a common convention to prefix your subject line with
[PATCH]. This lets people easily distinguish patches from other
-e-mail discussions.
+e-mail discussions. Use of additional markers after PATCH and
+the closing bracket to mark the nature of the patch is also
+encouraged. E.g. [PATCH/RFC] is often used when the patch is
+not ready to be applied but it is for discussion, [PATCH v2],
+[PATCH v3] etc. are often seen when you are sending an update to
+what you have previously sent.
"git format-patch" command follows the best current practice to
format the body of an e-mail message. At the beginning of the
material between the three dash lines and the diffstat.
Do not attach the patch as a MIME attachment, compressed or not.
-Do not let your e-mail client send quoted-printable. Many
+Do not let your e-mail client send quoted-printable. Do not let
+your e-mail client send format=flowed which would destroy
+whitespaces in your patches. Many
popular e-mail applications will not always transmit a MIME
attachment as plain text, making it impossible to comment on
your code. A MIME attachment also takes a bit more time to
that it will be postponed.
Exception: If your mailer is mangling patches then someone may ask
-you to re-send them using MIME.
+you to re-send them using MIME, that is OK.
+
+Do not PGP sign your patch, at least for now. Most likely, your
+maintainer or other people on the list would not have your PGP
+key and would not bother obtaining it anyway. Your patch is not
+judged by who you are; a good patch from an unknown origin has a
+far better chance of being accepted than a patch from a known,
+respected origin that is done poorly or does incorrect things.
+
+If you really really really really want to do a PGP signed
+patch, format it as "multipart/signed", not a text/plain message
+that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is
+not a text/plain, it's something else.
-Note that your maintainer does not subscribe to the git mailing
-list (he reads it via mail-to-news gateway). If your patch is
-for discussion first, send it "To:" the mailing list, and
-optoinally "cc:" him. If it is trivially correct or after list
-discussion reached consensus, send it "To:" the maintainer and
-optionally "cc:" the list.
+Note that your maintainer does not necessarily read everything
+on the git mailing list. If your patch is for discussion first,
+send it "To:" the mailing list, and optionally "cc:" him. If it
+is trivially correct or after the list reached a consensus, send
+it "To:" the maintainer and optionally "cc:" the list for
+inclusion.
+Also note that your maintainer does not actively involve himself in
+maintaining what are in contrib/ hierarchy. When you send fixes and
+enhancements to them, do not forget to "cc: " the person who primarily
+worked on that hierarchy in contrib/.
-(6) Sign your work
+
+(4) Sign your work
To improve tracking of who did what, we've borrowed the
"sign-off" procedure from the Linux kernel project on patches
Signed-off-by: Random J Developer <random@developer.example.org>
-Some people also put extra tags at the end. They'll just be ignored for
-now, but you can do this to mark internal company procedures or just
-point out some special detail about the sign-off.
+This line can be automatically added by git if you run the git-commit
+command with the -s option.
+
+Notice that you can place your own Signed-off-by: line when
+forwarding somebody else's patch with the above rules for
+D-C-O. Indeed you are encouraged to do so. Do not forget to
+place an in-body "From: " line at the beginning to properly attribute
+the change to its true author (see (2) above).
+
+Some people also put extra tags at the end.
+
+"Acked-by:" says that the patch was reviewed by the person who
+is more familiar with the issues and the area the patch attempts
+to modify. "Tested-by:" says the patch was tested by the person
+and found to have the desired effect.
+
+------------------------------------------------
+An ideal patch flow
+
+Here is an ideal patch flow for this project the current maintainer
+suggests to the contributors:
+
+ (0) You come up with an itch. You code it up.
+
+ (1) Send it to the list and cc people who may need to know about
+ the change.
+
+ The people who may need to know are the ones whose code you
+ are butchering. These people happen to be the ones who are
+ most likely to be knowledgeable enough to help you, but
+ they have no obligation to help you (i.e. you ask for help,
+ don't demand). "git log -p -- $area_you_are_modifying" would
+ help you find out who they are.
+
+ (2) You get comments and suggestions for improvements. You may
+ even get them in a "on top of your change" patch form.
+
+ (3) Polish, refine, and re-send to the list and the people who
+ spend their time to improve your patch. Go back to step (2).
+
+ (4) The list forms consensus that the last round of your patch is
+ good. Send it to the list and cc the maintainer.
+
+ (5) A topic branch is created with the patch and is merged to 'next',
+ and cooked further and eventually graduates to 'master'.
+
+In any time between the (2)-(3) cycle, the maintainer may pick it up
+from the list and queue it to 'pu', in order to make it easier for
+people play with it without having to pick up and apply the patch to
+their trees themselves.
+
+------------------------------------------------
+MUA specific hints
+
+Some of patches I receive or pick up from the list share common
+patterns of breakage. Please make sure your MUA is set up
+properly not to corrupt whitespaces. Here are two common ones
+I have seen:
+
+* Empty context lines that do not have _any_ whitespace.
+
+* Non empty context lines that have one extra whitespace at the
+ beginning.
+
+One test you could do yourself if your MUA is set up correctly is:
+
+* Send the patch to yourself, exactly the way you would, except
+ To: and Cc: lines, which would not contain the list and
+ maintainer address.
+
+* Save that patch to a file in UNIX mailbox format. Call it say
+ a.patch.
+
+* Try to apply to the tip of the "master" branch from the
+ git.git public repository:
+
+ $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply
+ $ git checkout test-apply
+ $ git reset --hard
+ $ git am a.patch
+
+If it does not apply correctly, there can be various reasons.
+
+* Your patch itself does not apply cleanly. That is _bad_ but
+ does not have much to do with your MUA. Please rebase the
+ patch appropriately.
+
+* Your MUA corrupted your patch; "am" would complain that
+ the patch does not apply. Look at .dotest/ subdirectory and
+ see what 'patch' file contains and check for the common
+ corruption patterns mentioned above.
+
+* While you are at it, check what are in 'info' and
+ 'final-commit' files as well. If what is in 'final-commit' is
+ not exactly what you would want to see in the commit log
+ message, it is very likely that your maintainer would end up
+ hand editing the log message when he applies your patch.
+ Things like "Hi, this is my first patch.\n", if you really
+ want to put in the patch e-mail, should come after the
+ three-dash line that signals the end of the commit message.
+
+
+Pine
+----
+
+(Johannes Schindelin)
+
+I don't know how many people still use pine, but for those poor
+souls it may be good to mention that the quell-flowed-text is
+needed for recent versions.
+
+... the "no-strip-whitespace-before-send" option, too. AFAIK it
+was introduced in 4.60.
+
+(Linus Torvalds)
+
+And 4.58 needs at least this.
+
+---
+diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1)
+Author: Linus Torvalds <torvalds@g5.osdl.org>
+Date: Mon Aug 15 17:23:51 2005 -0700
+
+ Fix pine whitespace-corruption bug
+
+ There's no excuse for unconditionally removing whitespace from
+ the pico buffers on close.
+
+diff --git a/pico/pico.c b/pico/pico.c
+--- a/pico/pico.c
++++ b/pico/pico.c
+@@ -219,7 +219,9 @@ PICO *pm;
+ switch(pico_all_done){ /* prepare for/handle final events */
+ case COMP_EXIT : /* already confirmed */
+ packheader();
++#if 0
+ stripwhitespace();
++#endif
+ c |= COMP_EXIT;
+ break;
+
+
+(Daniel Barkalow)
+
+> A patch to SubmittingPatches, MUA specific help section for
+> users of Pine 4.63 would be very much appreciated.
+
+Ah, it looks like a recent version changed the default behavior to do the
+right thing, and inverted the sense of the configuration option. (Either
+that or Gentoo did it.) So you need to set the
+"no-strip-whitespace-before-send" option, unless the option you have is
+"strip-whitespace-before-send", in which case you should avoid checking
+it.
+
+
+Thunderbird
+-----------
+
+(A Large Angry SCM)
+
+Here are some hints on how to successfully submit patches inline using
+Thunderbird.
+
+This recipe appears to work with the current [*1*] Thunderbird from Suse.
+
+The following Thunderbird extensions are needed:
+ AboutConfig 0.5
+ http://aboutconfig.mozdev.org/
+ External Editor 0.7.2
+ http://globs.org/articles.php?lng=en&pg=8
+
+1) Prepare the patch as a text file using your method of choice.
+
+2) Before opening a compose window, use Edit->Account Settings to
+uncheck the "Compose messages in HTML format" setting in the
+"Composition & Addressing" panel of the account to be used to send the
+patch. [*2*]
+
+3) In the main Thunderbird window, _before_ you open the compose window
+for the patch, use Tools->about:config to set the following to the
+indicated values:
+ mailnews.send_plaintext_flowed => false
+ mailnews.wraplength => 0
+
+4) Open a compose window and click the external editor icon.
+
+5) In the external editor window, read in the patch file and exit the
+editor normally.
+
+6) Back in the compose window: Add whatever other text you wish to the
+message, complete the addressing and subject fields, and press send.
+
+7) Optionally, undo the about:config/account settings changes made in
+steps 2 & 3.
+
+
+[Footnotes]
+*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse
+9.3 professional updates.
+
+*2* It may be possible to do this with about:config and the following
+settings but I haven't tried, yet.
+ mail.html_compose => false
+ mail.identity.default.compose_html => false
+ mail.identity.id?.compose_html => false
+
+
+Gnus
+----
+
+'|' in the *Summary* buffer can be used to pipe the current
+message to an external program, and this is a handy way to drive
+"git am". However, if the message is MIME encoded, what is
+piped into the program is the representation you see in your
+*Article* buffer after unwrapping MIME. This is often not what
+you would want for two reasons. It tends to screw up non ASCII
+characters (most notably in people's names), and also
+whitespaces (fatal in patches). Running 'C-u g' to display the
+message in raw form before using '|' to run the pipe can work
+this problem around.
+
+
+KMail
+-----
+
+This should help you to submit patches inline using KMail.
+
+1) Prepare the patch as a text file.
+
+2) Click on New Mail.
+
+3) Go under "Options" in the Composer window and be sure that
+"Word wrap" is not set.
+
+4) Use Message -> Insert file... and insert the patch.
+
+5) Back in the compose window: add whatever other text you wish to the
+message, complete the addressing and subject fields, and press send.