# Copyright (c) 2005 Junio C Hamano
#
+# if --tee was passed, write the output not only to the terminal, but
+# additionally to the file test-results/$BASENAME.out, too.
+case "$GIT_TEST_TEE_STARTED, $* " in
+done,*)
+ # do not redirect again
+ ;;
+*' --tee '*|*' --va'*)
+ mkdir -p test-results
+ BASE=test-results/$(basename "$0" .sh)
+ (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
+ echo $? > $BASE.exit) | tee $BASE.out
+ test "$(cat $BASE.exit)" = 0
+ exit
+ ;;
+esac
+
# Keep the original TERM for say_color
ORIGINAL_TERM=$TERM
--no-python)
# noop now...
shift ;;
+ --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
+ valgrind=t; verbose=t; shift ;;
+ --tee)
+ shift ;; # was handled already
*)
break ;;
esac
git tag "$1"
}
+# This function helps systems where core.filemode=false is set.
+# Use it instead of plain 'chmod +x' to set or unset the executable bit
+# of a file in the working directory and add it to the index.
+
+test_chmod () {
+ chmod "$@" &&
+ git update-index --add "--chmod=$@"
+}
+
+# Use test_set_prereq to tell that a particular prerequisite is available.
+# The prerequisite can later be checked for in two ways:
+#
+# - Explicitly using test_have_prereq.
+#
+# - Implicitly by specifying the prerequisite tag in the calls to
+# test_expect_{success,failure,code}.
+#
+# The single parameter is the prerequisite tag (a simple word, in all
+# capital letters by convention).
+
+test_set_prereq () {
+ satisfied="$satisfied$1 "
+}
+satisfied=" "
+
+test_have_prereq () {
+ case $satisfied in
+ *" $1 "*)
+ : yes, have it ;;
+ *)
+ ! : nope ;;
+ esac
+}
+
# You are not expected to call test_ok_ and test_failure_ directly, use
# the text_expect_* functions instead.
test_ok_ () {
- test_count=$(expr "$test_count" + 1)
- test_success=$(expr "$test_success" + 1)
+ test_success=$(($test_success + 1))
say_color "" " ok $test_count: $@"
}
test_failure_ () {
- test_count=$(expr "$test_count" + 1)
- test_failure=$(expr "$test_failure" + 1);
+ test_failure=$(($test_failure + 1))
say_color error "FAIL $test_count: $1"
shift
echo "$@" | sed -e 's/^/ /'
}
test_known_broken_ok_ () {
- test_count=$(expr "$test_count" + 1)
test_fixed=$(($test_fixed+1))
say_color "" " FIXED $test_count: $@"
}
test_known_broken_failure_ () {
- test_count=$(expr "$test_count" + 1)
test_broken=$(($test_broken+1))
say_color skip " still broken $test_count: $@"
}
}
test_skip () {
- this_test=$(expr "./$0" : '.*/\(t[0-9]*\)-[^/]*$')
- this_test="$this_test.$(expr "$test_count" + 1)"
+ test_count=$(($test_count+1))
to_skip=
for skp in $GIT_SKIP_TESTS
do
- case "$this_test" in
+ case $this_test.$test_count in
$skp)
to_skip=t
esac
done
+ if test -z "$to_skip" && test -n "$prereq" &&
+ ! test_have_prereq "$prereq"
+ then
+ to_skip=t
+ fi
case "$to_skip" in
t)
say_color skip >&3 "skipping test: $@"
- test_count=$(expr "$test_count" + 1)
say_color skip "skip $test_count: $1"
: true
;;
}
test_expect_failure () {
+ test "$#" = 3 && { prereq=$1; shift; } || prereq=
test "$#" = 2 ||
- error "bug in the test script: not 2 parameters to test-expect-failure"
+ error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
if ! test_skip "$@"
then
say >&3 "checking known breakage: $2"
}
test_expect_success () {
+ test "$#" = 3 && { prereq=$1; shift; } || prereq=
test "$#" = 2 ||
- error "bug in the test script: not 2 parameters to test-expect-success"
+ error "bug in the test script: not 2 or 3 parameters to test-expect-success"
if ! test_skip "$@"
then
say >&3 "expecting success: $2"
}
test_expect_code () {
+ test "$#" = 4 && { prereq=$1; shift; } || prereq=
test "$#" = 3 ||
- error "bug in the test script: not 3 parameters to test-expect-code"
+ error "bug in the test script: not 3 or 4 parameters to test-expect-code"
if ! test_skip "$@"
then
say >&3 "expecting exit code $1: $3"
# Usage: test_external description command arguments...
# Example: test_external 'Perl API' perl ../path/to/test.pl
test_external () {
- test "$#" -eq 3 ||
- error >&5 "bug in the test script: not 3 parameters to test_external"
+ test "$#" = 4 && { prereq=$1; shift; } || prereq=
+ test "$#" = 3 ||
+ error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
descr="$1"
shift
if ! test_skip "$descr" "$@"
then
# Announce the script to reduce confusion about the
# test output that follows.
- say_color "" " run $(expr "$test_count" + 1): $descr ($*)"
+ say_color "" " run $test_count: $descr ($*)"
# Run command; redirect its stderr to &4 as in
# test_run_, but keep its stdout on our stdout even in
# non-verbose mode.
repo="$1"
mkdir -p "$repo"
cd "$repo" || error "Cannot setup test environment"
- "$GIT_EXEC_PATH/git" init "--template=$GIT_EXEC_PATH/templates/blt/" >&3 2>&4 ||
+ "$GIT_EXEC_PATH/git-init" "--template=$owd/../templates/blt/" >&3 2>&4 ||
error "cannot run git init -- have you built things yet?"
mv .git/hooks .git/hooks-disabled
cd "$owd"
trap - EXIT
test_results_dir="$TEST_DIRECTORY/test-results"
mkdir -p "$test_results_dir"
- test_results_path="$test_results_dir/${0%-*}-$$"
+ test_results_path="$test_results_dir/${0%.sh}-$$"
echo "total $test_count" >> $test_results_path
echo "success $test_success" >> $test_results_path
# Test the binaries we have just built. The tests are kept in
# t/ subdirectory and are run in 'trash directory' subdirectory.
TEST_DIRECTORY=$(pwd)
-PATH=$TEST_DIRECTORY/..:$PATH
-GIT_EXEC_PATH=$(pwd)/..
+if test -z "$valgrind"
+then
+ if test -z "$GIT_TEST_INSTALLED"
+ then
+ PATH=$TEST_DIRECTORY/..:$PATH
+ GIT_EXEC_PATH=$TEST_DIRECTORY/..
+ else
+ GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) ||
+ error "Cannot run git from $GIT_TEST_INSTALLED."
+ PATH=$GIT_TEST_INSTALLED:$TEST_DIRECTORY/..:$PATH
+ GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
+ fi
+else
+ make_symlink () {
+ test -h "$2" &&
+ test "$1" = "$(readlink "$2")" || {
+ # be super paranoid
+ if mkdir "$2".lock
+ then
+ rm -f "$2" &&
+ ln -s "$1" "$2" &&
+ rm -r "$2".lock
+ else
+ while test -d "$2".lock
+ do
+ say "Waiting for lock on $2."
+ sleep 1
+ done
+ fi
+ }
+ }
+
+ make_valgrind_symlink () {
+ # handle only executables
+ test -x "$1" || return
+
+ base=$(basename "$1")
+ symlink_target=$TEST_DIRECTORY/../$base
+ # do not override scripts
+ if test -x "$symlink_target" &&
+ test ! -d "$symlink_target" &&
+ test "#!" != "$(head -c 2 < "$symlink_target")"
+ then
+ symlink_target=../valgrind.sh
+ fi
+ case "$base" in
+ *.sh|*.perl)
+ symlink_target=../unprocessed-script
+ esac
+ # create the link, or replace it if it is out of date
+ make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
+ }
+
+ # override all git executables in TEST_DIRECTORY/..
+ GIT_VALGRIND=$TEST_DIRECTORY/valgrind
+ mkdir -p "$GIT_VALGRIND"/bin
+ for file in $TEST_DIRECTORY/../git* $TEST_DIRECTORY/../test-*
+ do
+ make_valgrind_symlink $file
+ done
+ OLDIFS=$IFS
+ IFS=:
+ for path in $PATH
+ do
+ ls "$path"/git-* 2> /dev/null |
+ while read file
+ do
+ make_valgrind_symlink "$file"
+ done
+ done
+ IFS=$OLDIFS
+ PATH=$GIT_VALGRIND/bin:$PATH
+ GIT_EXEC_PATH=$GIT_VALGRIND/bin
+ export GIT_VALGRIND
+fi
GIT_TEMPLATE_DIR=$(pwd)/../templates/blt
unset GIT_CONFIG
GIT_CONFIG_NOSYSTEM=1
# in subprocesses like git equals our $PWD (for pathname comparisons).
cd -P "$test" || exit 1
-this_test=$(expr "./$0" : '.*/\(t[0-9]*\)-[^/]*$')
+this_test=${0##*/}
+this_test=${this_test%%-*}
for skp in $GIT_SKIP_TESTS
do
to_skip=
test_done
esac
done
+
+# Fix some commands on Windows
+case $(uname -s) in
+*MINGW*)
+ # Windows has its own (incompatible) sort and find
+ sort () {
+ /usr/bin/sort "$@"
+ }
+ find () {
+ /usr/bin/find "$@"
+ }
+ sum () {
+ md5sum "$@"
+ }
+ # git sees Windows-style pwd
+ pwd () {
+ builtin pwd -W
+ }
+ # no POSIX permissions
+ # backslashes in pathspec are converted to '/'
+ # exec does not inherit the PID
+ ;;
+*)
+ test_set_prereq POSIXPERM
+ test_set_prereq BSLASHPSPEC
+ test_set_prereq EXECKEEPSPID
+ ;;
+esac
+
+# test whether the filesystem supports symbolic links
+ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS
+rm -f y