-Git User's Manual (for version 1.5.3 or newer)
-______________________________________________
-
+Git User Manual
+_______________
Git is a fast distributed revision control system.
The best way to see how this works is using the linkgit:gitk[1]
command; running gitk now on a Git repository and looking for merge
-commits will help understand how the Git organizes history.
+commits will help understand how Git organizes history.
In the following, we say that commit X is "reachable" from commit Y
if commit X is an ancestor of commit Y. Equivalently, you could say
a summary of the commands:
`git branch`::
- list all branches
+ list all branches.
`git branch <branch>`::
create a new branch named `<branch>`, referencing the same
- point in history as the current branch
+ point in history as the current branch.
`git branch <branch> <start-point>`::
create a new branch named `<branch>`, referencing
`<start-point>`, which may be specified any way you like,
- including using a branch name or a tag name
+ including using a branch name or a tag name.
`git branch -d <branch>`::
- delete the branch `<branch>`; if the branch you are deleting
- points to a commit which is not reachable from the current
- branch, this command will fail with a warning.
+ delete the branch `<branch>`; if the branch is not fully
+ merged in its upstream branch or contained in the current branch,
+ this command will fail with a warning.
`git branch -D <branch>`::
- even if the branch points to a commit not reachable
- from the current branch, you may know that that commit
- is still reachable from some other branch or tag. In that
- case it is safe to use this command to force Git to delete
- the branch.
+ delete the branch `<branch>` irrespective of its merged status.
`git checkout <branch>`::
make the current branch `<branch>`, updating the working
- directory to reflect the version referenced by `<branch>`
+ directory to reflect the version referenced by `<branch>`.
`git checkout -b <new> <start-point>`::
create a new branch `<new>` referencing `<start-point>`, and
check it out.
------------------------------------------------
$ git checkout v2.6.17
-Note: moving to "v2.6.17" which isn't a local branch
-If you want to create a new branch from this checkout, you may do so
-(now or later) by using -b with the checkout command again. Example:
- git checkout -b <new_branch_name>
+Note: checking out 'v2.6.17'.
+
+You are in 'detached HEAD' state. You can look around, make experimental
+changes and commit them, and you can discard any commits you make in this
+state without impacting any branches by performing another checkout.
+
+If you want to create a new branch to retain commits you create, you may
+do so (now or later) by using -b with the checkout command again. Example:
+
+ git checkout -b new_branch_name
+
HEAD is now at 427abfa... Linux v2.6.17
------------------------------------------------
$ cat .git/HEAD
427abfa28afedffadfca9dd8b067eb6d36bac53f
$ git branch
-* (no branch)
+* (detached from v2.6.17)
master
------------------------------------------------
-------------------------------------------------
Or you could recall that the `...` operator selects all commits
-contained reachable from either one reference or the other but not
+reachable from either one reference or the other but not
both; so
-------------------------------------------------
$ gitk e05db0fd..
-------------------------------------------------
-Or you can use linkgit:git-name-rev[1], which will give the commit a
+or you can use linkgit:git-name-rev[1], which will give the commit a
name based on any tag it finds pointing to one of the commit's
descendants:
As yet another alternative, the linkgit:git-show-branch[1] command lists
the commits reachable from its arguments with a display on the left-hand
-side that indicates which arguments that commit is reachable from. So,
-you can run something like
+side that indicates which arguments that commit is reachable from.
+So, if you run something like
-------------------------------------------------
$ git show-branch e05db0fd v1.5.0-rc0 v1.5.0-rc1 v1.5.0-rc2
...
-------------------------------------------------
-then search for a line that looks like
+then a line like
-------------------------------------------------
+ ++ [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if
available
-------------------------------------------------
-Which shows that e05db0fd is reachable from itself, from v1.5.0-rc1, and
-from v1.5.0-rc2, but not from v1.5.0-rc0.
+shows that e05db0fd is reachable from itself, from v1.5.0-rc1,
+and from v1.5.0-rc2, and not from v1.5.0-rc0.
[[showing-commits-unique-to-a-branch]]
Showing commits unique to a given branch
Modifying the index is easy:
-To update the index with the new contents of a modified file, use
-
--------------------------------------------------
-$ git add path/to/file
--------------------------------------------------
-
-To add the contents of a new file to the index, use
+To update the index with the contents of a new or modified file, use
-------------------------------------------------
$ git add path/to/file
-------------------------------------------------
-To remove a file from the index and from the working tree,
+To remove a file from the index and from the working tree, use
-------------------------------------------------
$ git rm path/to/file
$ git merge branch
-------------------------------------------------
-are roughly equivalent. The former is actually very commonly used.
+are roughly equivalent.
[[submitting-patches]]
Submitting patches to a project
-------------------------------------------------
(See also
-link:howto/setup-git-server-over-http.txt[setup-git-server-over-http]
+link:howto/setup-git-server-over-http.html[setup-git-server-over-http]
for a slightly more sophisticated setup using WebDAV which also
allows pushing over HTTP.)
$ ... patch ... test ... commit [ ... patch ... test ... commit ]*
-------------------------------------------------
-When you are happy with the state of this change, you can pull it into the
+When you are happy with the state of this change, you can merge it into the
"test" branch in preparation to make it public:
-------------------------------------------------
-$ git checkout test && git pull . speed-up-spinlocks
+$ git checkout test && git merge speed-up-spinlocks
-------------------------------------------------
It is unlikely that you would have any conflicts here ... but you might if you
means that the patches can be moved into the `release` tree in any order.
-------------------------------------------------
-$ git checkout release && git pull . speed-up-spinlocks
+$ git checkout release && git merge speed-up-spinlocks
-------------------------------------------------
After a while, you will have a number of branches, and despite the
You can save space and make Git faster by moving these loose objects in
to a "pack file", which stores a group of objects in an efficient
compressed format; the details of how pack files are formatted can be
-found in link:technical/pack-format.txt[technical/pack-format.txt].
+found in link:technical/pack-format.html[pack format].
To put the loose objects into a pack, just run git repack:
------------------------------------------------
$ git repack
-Generating pack...
-Done counting 6020 objects.
-Deltifying 6020 objects.
- 100% (6020/6020) done
-Writing 6020 objects.
- 100% (6020/6020) done
-Total 6020, written 6020 (delta 4070), reused 0 (delta 0)
-Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created.
+Counting objects: 6020, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (6020/6020), done.
+Writing objects: 100% (6020/6020), done.
+Total 6020 (delta 4070), reused 0 (delta 0)
------------------------------------------------
-You can then run
+This creates a single "pack file" in .git/objects/pack/
+containing all currently unpacked objects. You can then run
------------------------------------------------
$ git prune
$ git prune
------------------------------------------------
-and they'll be gone. But you should only run `git prune` on a quiescent
+and they'll be gone. (You should only run `git prune` on a quiescent
repository--it's kind of like doing a filesystem fsck recovery: you
don't want to do that while the filesystem is mounted.
-
-(The same is true of `git fsck` itself, btw, but since
-`git fsck` never actually *changes* the repository, it just reports
-on what it found, `git fsck` itself is never 'dangerous' to run.
-Running it while somebody is actually changing the repository can cause
-confusing and scary messages, but it won't actually do anything bad. In
-contrast, running `git prune` while somebody is actively changing the
-repository is a *BAD* idea).
+`git prune` is designed not to cause any harm in such cases of concurrent
+accesses to a repository but you might receive confusing or scary messages.)
[[recovering-from-repository-corruption]]
Recovering from repository corruption
manually check them out; earlier versions won't recognize the submodules at
all.
-To see how submodule support works, create (for example) four example
+To see how submodule support works, create four example
repositories that can be used later as a submodule:
-------------------------------------------------
-------------------------------------------------
$ git branch
-* (no branch)
+* (detached from d266b98)
master
-------------------------------------------------
previous states represented by other commits.
In other words, while a "tree" represents a particular directory state
-of a working directory, a "commit" represents that state in "time",
+of a working directory, a "commit" represents that state in time,
and explains how we got there.
You create a commit object by giving it the tree that describes the
result to the file pointed at by `.git/HEAD`, so that we can always see
what the last committed state was.
-Here is an ASCII art by Jon Loeliger that illustrates how
-various pieces fit together.
+Here is a picture that illustrates how various pieces fit together:
------------
Merging multiple trees
----------------------
-Git helps you do a three-way merge, which you can expand to n-way by
-repeating the merge procedure arbitrary times until you finally
-"commit" the state. The normal situation is that you'd only do one
-three-way merge (two parents), and commit it, but if you like to, you
-can do multiple parents in one go.
+Git can help you perform a three-way merge, which can in turn be
+used for a many-way merge by repeating the merge procedure several
+times. The usual situation is that you only do one three-way merge
+(reconciling two lines of history) and commit the result, but if
+you like to, you can merge several branches in one go.
-To do a three-way merge, you need the two sets of "commit" objects
-that you want to merge, use those to find the closest common parent (a
-third "commit" object), and then use those commit objects to find the
-state of the directory ("tree" object) at these points.
+To perform a three-way merge, you start with the two commits you
+want to merge, find their closest common parent (a third commit),
+and compare the trees corresponding to these three commits.
-To get the "base" for the merge, you first look up the common parent
-of two commits with
+To get the "base" for the merge, look up the common parent of two
+commits:
-------------------------------------------------
$ git merge-base <commit1> <commit2>
-------------------------------------------------
-which will return you the commit they are both based on. You should
-now look up the "tree" objects of those commits, which you can easily
-do with (for example)
+This prints the name of a commit they are both based on. You should
+now look up the tree objects of those commits, which you can easily
+do with
-------------------------------------------------
$ git cat-file commit <commitname> | head -1
that is used to name the object is the hash of the original data
plus this header, so `sha1sum` 'file' does not match the object name
for 'file'.
-(Historical note: in the dawn of the age of Git the hash
-was the SHA-1 of the 'compressed' object.)
As a result, the general consistency of an object can always be tested
independently of the contents or the type of the object: all objects can